Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DASH”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Flight effects on noise from coaxial dual flow. I - Unheated jets

The effects of flight on sound radiated from embedded, uncorrelated ring sources convecting along the midst of the primary and the secondary streams of a coaxial dual flow which emerges from a moving nozzle into the ambience are studied. Cold jets are examined. The problem is posed as a double vortex-sheet flow model which involves deliberate suppression of inherent instabilities of the flow and is formulated, as a linear problem, in terms of the combined contributions of two independent uncorrelated quadrupole-type ring sources, the one convecting in the primary flow representing the sources generated due to the interaction at the primary/secondary interface and the other convecting in the secondary flow representing the sources generated due to the interaction at the secondary/ambient interface. The analysis shows that the effects of flight induce: (1) amplication of noise in the forward quadrant, (2) reduction of noise in the aft quadrant and (3) absolutely no impact on radiation of noise at Theta = 90 deg to the jet axis.

Dash, R.↗
NASA NTRS1986

Flight effects on noise from coaxial dual flow. II - Heated jets

This paper is a continuation of the study described in Part I and deals with the flight effects on noise from heated jets. The present work shows that coaxial exhaust flows with inverted profiles are much quieter than flows with conventional profiles. Among all possible coaxial configurations with only one of the streams heated conventional profile, inverted profile, and the variable stream control engine (VSCE) cycle - and holding constant mass flow and thrust, a VSCE cycle is the best possible engine cycle as it provides over 18-dB reduction in sound pressure level (as compared to noise from a conventional profile cycle) at all angles, both statically and in flight. The study also indicates that, if both the coaxial streams are heated unequally, a duct-burning profile, combined with the variable stream control engine (DB-VSCE) concept, gives rise to a powerful coaxial device which generates the least noise, both statically and in flight. This concept will be of paramount importance as one of the most variable nozzle designs of the future.

Dash, R.↗
NASA NTRS1987

Improved algorithms for circulation-control airfoils in transonic flow

A zonal model for aerodynamic analysis of two-dimensional transonic circulation control airfoils has been developed. The present approach combines a transonic full potential method for the global flow field and an integral boundary layer method for regions of the airfoil excluding the wall jet with a parabolized Navier-Stokes code for resolving the wall jet region beyond the slot. Existing methods suffer from two deficiencies: the insensitivity of the calculation to small changes in the Coanda surface geometry; and the inability to predict the shock structure of the underexpanded supersonic wall jets. The present wall jet procedure involves a pressure-split approach in the streamwise sense to enable noniterative solution of the coupled continuity and normal momentum equations for increased surface sensitivity and allows for expansion of applications to sonic slot exit conditions. Encouraging results are obtained in comparison with experimental data for two circulation airfoils with subsonic wall jets.

Dvorak, Frank A.↗
NASA NTRS1987

Wall jet analysis for circulation control aerodynamics. Part 1: Fundamental CFD and turbulence modeling concepts

An overview of parabolic and PNS (Parabolized Navier-Stokes) methodology developed to treat highly curved sub and supersonic wall jets is presented. The fundamental data base to which these models were applied is discussed in detail. The analysis of strong curvature effects was found to require a semi-elliptic extension of the parabolic modeling to account for turbulent contributions to the normal pressure variations, as well as an extension to the turbulence models utilized, to account for the highly enhanced mixing rates observed in situations with large convex curvature. A noniterative, pressure split procedure is shown to extend parabolic models to account for such normal pressure variations in an efficient manner, requiring minimal additional run time over a standard parabolic approach. A new PNS methodology is presented to solve this problem which extends parabolic methodology via the addition of a characteristic base wave solver. Applications of this approach to analyze the interaction of wave and turbulence processes in wall jets is presented.

Dash, S. M.↗
NASA NTRS1987

Wall jet analysis for circulation control aerodynamics. Part 2: Zonal modeling concepts for wall jet/potential flow coupling

Work currently in progress to update an existing transonic circulation control airfoil analysis method is described. Existing methods suffer from two dificiencies: the inability to predict the shock structure of the underexpanded supersonic jets; and the insensitivity of the calculation to small changes in the Coanda surface geometry. A method developed for the analysis of jet exhaust plumes in supersonic flow is being modified for the case of the underexpanded wall jet. In the subsonic case, the same wall jet model was modified to include the calculation of the normal pressure gradient. This model is currently being coupled with the transonic circulation control airfoil analysis.

Dvorak, Frank A.↗
NASA NTRS1988

Fully-coupled analysis of jet mixing problems. Three-dimensional PNS model, SCIP3D

Numerical procedures formulated for the analysis of 3D jet mixing problems, as incorporated in the computer model, SCIP3D, are described. The overall methodology closely parallels that developed in the earlier 2D axisymmetric jet mixing model, SCIPVIS. SCIP3D integrates the 3D parabolized Navier-Stokes (PNS) jet mixing equations, cast in mapped cartesian or cylindrical coordinates, employing the explicit MacCormack Algorithm. A pressure split variant of this algorithm is employed in subsonic regions with a sublayer approximation utilized for treating the streamwise pressure component. SCIP3D contains both the ks and kW turbulence models, and employs a two component mixture approach to treat jet exhausts of arbitrary composition. Specialized grid procedures are used to adjust the grid growth in accordance with the growth of the jet, including a hybrid cartesian/cylindrical grid procedure for rectangular jets which moves the hybrid coordinate origin towards the flow origin as the jet transitions from a rectangular to circular shape. Numerous calculations are presented for rectangular mixing problems, as well as for a variety of basic unit problems exhibiting overall capabilities of SCIP3D.

Wolf, D. E.↗
NASA NTRS1990

Progress in the development of advanced computational models for the analysis of generalized supersonic jet flowfields

This paper describes two three-dimensional computational codes (PARCH and CRAFT) for computing a generalized supersonic jet flowfields with subsonic external streams, which solve the Reynolds-averaged Navier-Stokes equations in a time asymptotic manner. The application of these codes to an imperfectly expanded jet flowfield is demonstrated. Special attention is given to numerical issues and to turbulence modeling. The application of the PARCH and CRAFT codes to other related flowfield problems, such as gas turbine and nozzle flows, and to generalized missile-plume flowfields is discussed.

Dash, S. M.↗
NASA NTRS1991

Observations on practical turbulence modeling for high-speed jet/plume flowfields

An overview is presented of the current status in terms of simulating basic high-speed/straightback free jet flowfields with two-equation turbulence models. A building-block approach is described which provides a systematic method of calibrating such turbulence models. Data to support this approach focuses on obtaining turbulence modeling capabilities to reproduce basic mean flow structure for simple flows before progressing to more complex problems. For transverse jets and wall jets, new building-blocks of data are necessary with turbulence modeling capabilities unifying the free jet building-blocks discussed, and fundamental boundary layer and shock/boundary layer interaction building-blocks resulting from other studies.

Dash, Sanford M.↗
NASA NTRS1991

Prediction of jet mean flow structure in support of HSCT noise suppression concepts

The paper describes the application of techniques based on computational fluid dynamics to the simulation of jet flowfields. A solution code for the Reynolds-averaged Navier-Stokes equations is supplemented by conventional two-equation turbulence models based on the Boussinesq approximation. The axisymmetric SCIPVIS code is enhanced with the PARCH and CRAFT codes to examine plug-jet flowfields and imperfectly expanded axisymmetric free round jets. The sensitivity of shock/boundary layer interactions is observed in simulations of the plug case, and the adaptive gridding in the disk region and turbulence levels generated at the triple point are identified as areas in the Mach case that require improvement. Jet-wave structure in the region beyond the first several shock cells can be predicted, and turbulence modeling can be undertaken with respect to improving compressibility, length scale, vorticity, and energy budget. The mean flow structure of imperfectly expanded jets can be studied to develop related noise suppression concepts for the High-Speed Civilian Transport (HSCT).

Sinha, N.↗
NASA NTRS1991

Pilot's Automated Weather Support System (PAWSS) concepts

The FAA and NASA are investigating concepts for providing automated support to pilots in obtaining and using weather information. The pilot's Automated Weather Support System (PAWSS) activity is using computer technology to assist the pilot in acquiring and displaying weather information in the cockpit, and to assist in assessing and applying weather data in flight management and en route support. The PAWSS concepts include data link communications with a short update cycle of new weather data, color-coded map depictions with alpha-numeric data available for backup and detailed data presentation, automated monitoring of weather trends with alerting for hazardous conditions, and expert system technology applications in weather data assessments and flight management applications.

Crabill, N. L↗
NASA NTRS1991

Pilot's Automated Weather Support System (PAWSS) concepts demonstration project. Phase 1: Pilot's weather information requirements and implications for weather data systems design

The weather information requirements for pilots and the deficiencies of the current aviation weather support system in meeting these requirements are defined. As the amount of data available to pilots increases significantly in the near future, expert system technology will be needed to assist pilots in assimilating that information. Some other desirable characteristics of an automation-assisted system for weather data acquisition, dissemination, and assimilation are also described.

Crabill, Norman L.↗
NASA NTRS1992

Exhaust plumes and their interaction with missile airframes - A new viewpoint

The present, novel treatment of missile airframe-exhaust plume interactions emphasizes their simulation via a formal solution of the Reynolds-averaged Navier-Stokes (RNS) equation and is accordingly able to address the simulation requirements of novel missiles with nonconventional/integrated propulsion systems. The method is made possible by implicit RNS codes with improved artificial dissipation models, generalized geometric capabilities, and improved two-equation turbulence models, as well as by such codes' recent incorporation of plume thermochemistry and multiphase flow effects.

Dash, S. M.↗
NASA NTRS2000

Structural Modeling Using "Scanning and Mapping" Technique

Supported by NASA Glenn Center, we are in the process developing a structural damage diagnostic and monitoring system for rocket engines, which consists of five modules: Structural Modeling, Measurement Data Pre-Processor, Structural System Identification, Damage Detection Criterion, and Computer Visualization. The function of the system is to detect damage as it is incurred by the engine structures. The scientific principle to identify damage is to utilize the changes in the vibrational properties between the pre-damaged and post-damaged structures. The vibrational properties of the pre-damaged structure can be obtained based on an analytic computer model of the structure. Thus, as the first stage of the whole research plan, we currently focus on the first module - Structural Modeling. Three computer software packages are selected, and will be integrated for this purpose. They are PhotoModeler-Pro, AutoCAD-R14, and MSC/NASTRAN. AutoCAD is the most popular PC-CAD system currently available in the market. For our purpose, it plays like an interface to generate structural models of any particular engine parts or assembly, which is then passed to MSC/NASTRAN for extracting structural dynamic properties. Although AutoCAD is a powerful structural modeling tool, the complexity of engine components requires a further improvement in structural modeling techniques. We are working on a so-called "scanning and mapping" technique, which is a relatively new technique. The basic idea is to producing a full and accurate 3D structural model by tracing on multiple overlapping photographs taken from different angles. There is no need to input point positions, angles, distances or axes. Photographs can be taken by any types of cameras with different lenses. With the integration of such a modeling technique, the capability of structural modeling will be enhanced. The prototypes of any complex structural components will be produced by PhotoModeler first based on existing similar components, then passed to AutoCAD for modification and correction of any discrepancies seen in the Photomodeler version of the 3Dmodel. These three software packages are fully compatible. The DXF file can be used to transfer drawings among those packages. To begin this entire process, we are using a small replica of an actual engine blade as a test object. This paper introduces the accomplishment of our recent work.

Amos, Courtney L.↗
NASA NTRS2000

Towards Simulating Non-Axisymmetric Influences on Aircraft Plumes for Signature Prediction

A methodology for efficiently including three-dimensional effects on aircraft plume signature is presented. First, exploratory work on the use of passive mixing enhancement devices, namely chevrons and tabs, in IR signature reduction for external turbofan plumes is demonstrated numerically and experimentally. Such small attachments, when properly designed, cause an otherwise axisymmetric plume to have significant 3D structures, affecting signature prediction. Second, an approach for including non-axisymmetric and installation effects in plume signature prediction is discussed using unstructured methodology. Unstructured flow solvers, using advanced turbulence modeling and plume thermochemistry, facilitate the modeling of aircraft effects on plume structure that previously have been neglected due to gridding complexities. The capabilities of the CRUNCH unstructured Navier-Stokes solver for plume modeling is demonstrated for a passively mixed turbofan nozzle, a generic fighter nozzle, and a complete aircraft.

Kenzakowski, D. C.↗
NASA NTRS2007

Risk Management: A Practical Design Tool For Space Systems and Technology Development

Over the past two decades, risk management and risk analysis have emerged throughout the business community in the United States (US) as prominent planning and development strategies used to mitigate risk of failure and ensure a high return on investment (ROI) for business endeavors (financial and otherwise). They are generic tools that can be applied to any business regardless of the sector (i.e., government, university, private) and have been used by the Federal government in the form of institutional practices aimed at maximizing the probability of success in business activities. One US Federal agency that incorporates risk management and analysis techniques into business and/or engineering activities is the National Aeronautics and Space Administration (NASA). The present work is a discussion on mission, spacecraft and instrument design (as well as technology development) and the role of risk management, analysis and mitigation as a fundamental tool in the design process.

Silk, Eric A.↗