Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Current stability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Core-Pedestal Plasma Configurations in Advanced Tokamaks

Here, several configurations for the core and pedestal plasma are examined for a predefined tokamak design by implementing multiple heating/current drive (H/CD) sources to achieve an optimum configuration of high fusion power in a noninductive operation while maintaining an ideally magnetohydrodynamic (MHD) stable core plasma using the IPS-FASTRAN framework. IPS-FASTRAN is a component-based lightweight coupled simulation framework that is used to simulate magnetically confined plasma by integrating a set of high-fidelity codes to construct the plasma equilibrium (EFIT, TOQ, and CHEASE), calculate the turbulent heat and particle transport fluxes (TGLF), model various H/CD systems (TORIC, TORAY, GENRAY, and NUBEAM), model the pedestal pressure and width (EPED), and estimate the ideal MHD stability (DCON). The TGLF core transport model and EPED pedestal model are used to self-consistently predict plasma profiles consistent with ideal MHD stability and H/CD (and bootstrap) current sources. In order to evaluate the achievable and sustainable plasma beta, varying configurations are produced ranging from the no-wall stability to with-wall stability regimes, simultaneously subject to the self-consistent TGLF, EPED, and H/CD source profile predictions that optimize configuration performance. The pedestal density, plasma current, and total injected power are scanned to explore their impact on the target plasma configuration, fusion power, and confinement quality. A set of fully noninductive scenarios are achieved by employing ion-cyclotron, neutral beam injection, helicon, and lower-hybrid H/CDs to provide a broad profile for the total current drive in the core region for a predefined tokamak design. These noninductive scenarios are characterized by high fusion gain (Q ~ 4) and power (P fus ~ 600 MW), optimum confinement quality (H 98 ~ 1.1), and high bootstrap current fraction (f BS ~ 0.7) for Greenwald fraction below unity. The broad current profile configurations identified are stable to low-n kink modes either because the normalized pressure β N is below the no-wall limit or a wall is present.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS2014

Advancing Navigation, Timing, and Science with the Deep Space Atomic Clock

NASA's Deep Space Atomic Clock mission is developing a small, highly stable mercury ion atomic clock with an Allan deviation of at most 1e-14 at one day, and with current estimates near 3e-15. This stability enables one-way radiometric tracking data with accuracy equivalent to and, in certain conditions, better than current two-way deep space tracking data; allowing a shift to a more efficient and flexible one-way deep space navigation architecture. DSAC-enabled one-way tracking will benefit navigation and radio science by increasing the quantity and quality of tracking data. Additionally, DSAC would be a key component to fully-autonomous onboard radio navigation useful for time-sensitive situations. Potential deep space applications of DSAC are presented, including orbit determination of a Mars orbiter and gravity science on a Europa flyby mission.

radio science↗
DOE OSTI2022

Plutonium mobilization from contaminated estuarine sediments, Esk Estuary (UK)

Since 1952, liquid radioactive effluent containing 238-242 Pu, 241 Am, 237 Np, 137 Cs, and 99 Tc has been released with authorization from the Sellafield nuclear complex (UK) into the Irish Sea. This represents the largest source of plutonium (Pu) discharged in all western Europe, with 276 kg having been released. In the Eastern Irish Sea, the majority of the transuranic activity has settled into an area of sediments (Mudpatch) located off the Cumbrian coast. Radionuclides from the Mudpatch have been re-dispersed via particulate transport in fine-grained estuarine and intertidal sediments to the North-East Irish Sea, including the intertidal saltmarsh located at the mouth of the Esk Estuary. Saltmarshes are highly dynamic systems which are vulnerable to external agents (sea level change, erosion, sediment supply, and freshwater inputs), and their stability remains uncertain under current sea level rise projections and possible increases in storm activity. In this work, we examined factors affecting Pu mobility in contaminated sediments collected from the Esk Estuary by conducting leaching experiments under both anoxic and oxic conditions. Here, leaching experiments were conducted over a 9-month period and were periodically sampled to determine solution phase Pu via multicollector-inductively coupled plasma-mass spectrometry (MC-ICP-MS), and to measure redox indicators (Eh, pH and extractable Fe(II)). Microbial community composition was also characterized in the sediments, and at the beginning and end of the anoxic/oxic experiments. Results show that: 1) Pu leaching is about three times greater in solutions leached under anoxic conditions compared to oxic conditions, 2) the sediment slurry microbial communities shift as conditions change from anoxic to oxic, 3) Pu leaching is enhanced in the shallow sediments (0–10 cm depth), and 4) the magnitude of Pu leached from sediments is not correlated with total Pu, indicating that the biogeochemistry of sediment-associated Pu is spatially heterogeneous. These findings provide constraints on the stability of redox sensitive Pu in biogeochemically dynamic/transient environments on a timescale of months and suggests that anoxic conditions can enhance Pu mobility in estuarine systems.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
NASA NTRS1979

Application of stability theory to laminar flow control

The paper summarizes the state-of-the-art for application of stability theory to laminar flow control using suction, wall temperature and/or favorable pressure gradient ('natural laminar flow'). Discussions include current LFC problem areas requiring stability analyses, methods of relating stability theory to transition with results from data and theory comparisons available thus far, and a summary of low disturbance data available for theory calibration on swept wings. Critical issues highlighted are problems peculiar to suction LFC on high performance transonic wings and application of the e-to-the-n-power method to both low and high speed flight data.

Hefner, J. N.↗
NASA NTRS1979

Hydrogen maser implementation in the Deep Space Network at the Jet Propulsion Laboratory

The Frequency Standard Test Laboratory and its activities are described. The test laboratory has the capability to measure the frequency stability of five frequency standards including environmental parameters. Nine frequency standards may be evaluated simultaneously upon completion of the current instrumentation expansion program. Frequency stability measurements and environmental data on five H-masers are presented.

Kuhnle, P. F.↗
NASA NTRS1975

Stability of multirate sampled-data systems

Current adaptive sampling schemes that can be used in sampled-data systems with variable rate sampling does not guarantee the stability of the resulting closed-loop system. A study was undertaken with the objective of finding a stable control law for multirate sampled-data systems. The problem is formulated such that the sampling interval is selected from a set of fixed number of sample intervals. A necessary and sufficient condition under which these types of systems can be stabilized is given. For a certain subclass of these types of systems, a sampling selection algorithm is given which results in a stable closed-loop system.

Stanford, D. P.↗
DOE OSTI2022

Synthesis and Mechanical Properties of sub 5‐μm PolyUiO‐66 Thin Films on Gold Surfaces

Abstract Metal‐organic framework (MOF) thin films currently lack the mechanical stability needed for electronic device applications. Polymer‐based metal‐organic frameworks (polyMOFs) have been suggested to provide mechanical advantages over MOFs, however, the mechanical properties of polyMOFs have not yet been characterized. In this work, we developed a method to synthesize continuous sub‐5 μm polyUiO‐66(Zr) films on Au substrates, which allowed us to undertake initial mechanical property investigations. Comparisons between polyUiO‐66 and UiO‐66 thin films determined polyUiO‐66 thin films exhibit a lower modulus but similar hardness to UiO‐66 thin films. The initial mechanical characterization indicates that further development is needed to leverage the mechanical property advantages of polyMOFs over MOFs. Additionally, the demonstration in this work of a continuous surface‐supported polyUiO‐66 thin film enables utilization of this emerging class of polyMOF materials in sensors and devices applications.

Frederick, Esther↗
DOE OSTI2026

Through‐Plane Conductive Hydrophobic Electrodes for CO 2 Electrolysis to Ethylene

Copper catalyst gas diffusion electrodes (GDEs) have demonstrated unique electrochemical selectivity converting CO 2 to C 2 -hydrocarbons such as ethylene and ethanol but have been challenged by their hydrophobic chemical stability and internal electrical resistance leading to low energy efficiency. Carbon-supported GDEs have low electrical resistance but lack sufficient stability at industrially relevant current densities. While polymer-supported GDEs have improved hydrophobicity, they also display high in-plane electrical resistance, particularly at industrial scales. Here, in this work, we demonstrate a composite gas diffusion layer that combines hydrophobic porous polymers with an electrically conductive backbone addressing these core gas diffusion electrode (GDE) scaling challenges. We investigate the material properties of standalone porous perfluoropolyether (PFPE) polymers, including porosity and surface morphology, under varying processing conditions and then incorporate these polymers into a porous copper foam. This composite enhances the mechanical rigidity necessary for cell assembly and provides a through-plane electrical conduction path to reduce electrical resistive losses. This enhanced PFPE composite GDE displays efficient CO 2 reduction, achieving 15% ethylene energy efficiency at 100 cm 2 . These findings contribute to the development of advanced catalyst materials and electrode architectures and promote scalable strategies for electrochemical conversion of CO 2 into high-value carbon products.

Chemistry↗
DOE OSTI2021

High-performance SO 2 -depolarized electrolysis cell using advanced polymer electrolyte membranes

Three different proton conducting polymeric membrane materials (Nafion® 115, Nafion® 212, and sulfonated Diels-Alder polyphenylene [SDAPP]) were evaluated for use in SO 2 -depolarized electrolyzers for the production of hydrogen via the hybrid sulfur cycle. Their performance was measured using different water feed strategies to minimize overpotential losses while maintaining high product acid concentration. Both thin membranes (Nafion® 212 and SDAPP) showed performance superior to that of the thicker Nafion® 115. Here, the SDAPP membrane electrode assembly (MEA) performed well at higher acid concentrations, maintaining low ohmic and kinetic overpotentials. Finally, short-term (100-h) stability tests under constant current conditions showed minimal degradation for the SDAPP and Nafion® 212 MEAs. SDAPP MEA performance approached the targets needed to make the hybrid sulfur cycle a competitive process for hydrogen production (product acid concentration ≥65 wt% H 2 SO 4 at ≤ 0.6-V cell potential and ≥0.5 A-cm –2 current density).

08 HYDROGEN↗
DOE OSTI2025

Stability of Mn-Doped TiO 2 Thin-Film Anodes during Water Oxidation Reactions

Incorporating manganese atoms into TiO 2 has been shown to improve its activity for water oxidation. However, its activity has been observed to steadily degrade under constant applied potential, especially at more oxidizing applied potentials. Here, the compositional profile and electrochemical stability of Mn-doped TiO 2 (Mn:TiO 2 ) thin-film electrodes precisely fabricated by atomic layer deposition (ALD) were evaluated to elucidate the mechanisms of electrode degradation. Although ALD enables the deposition of Mn dopants throughout the film thickness, only Mn within 1.5 nm of the surface was observed to be redox active. Annealing Mn:TiO 2 films in air leads to the diffusion of Mn toward the electrode surface and oxidation of the Mn and alters the redox behavior. Annealing endows greater stability to Mn redox behavior but does not fully stabilize the water oxidation current, suggesting that the two electrochemical processes are not precisely correlated. In situ inductively coupled plasma mass spectrometry reveals that Mn is lost from Mn:TiO 2 films at potentials greater than 1.8 V vs RHE. However, the initial Mn loss is equivalent to less than a single ALD layer of MnO x . Longer-term constant potential experiments suggest that Mn is lost from up to 1 nm of the electrode surface but that this loss may account for only a portion of the diminished water oxidation activity.

atomic layer deposition↗
DOE OSTI2025

Nitrogen Vacancies Induce Fatigue in Ferroelectric Al 0.93 B 0.07 N

Wurtzite ferroelectrics (e.g., Al 0.93 B 0.07 N) are being explored for high-temperature and emerging near-, or in-compute, memory architectures due to the material advantages offered by their large remanent polarization and robust chemical stability. Despite these advantages, current Al0.93B0.07N devices do not have sufficient endurance lifetime to meet roadmap targets. To identify the defects responsible for this limited endurance, a combination of electronic measurements and optical spectroscopies characterized the evolution of defect states within Al 0.93 B 0.07 N with cycling. Ultrathin (∼10 nm) metal contacts were used to optically probe regions subject to ferroelectric switching; photoluminescence spectroscopy identified the emergence of a transition near 2.1 eV whose intensity scaled with the non-switching polarization quantified via positive-up negative-down (PUND) measurements. Accompanying thermally stimulated depolarization current (TSDC) and modulus spectroscopy measurements also observed the strengthening of a state near 2.1 eV. The origin of this feature is ascribed to transitions between a nitrogen vacancy and another defect deeper in the bandgap. Recognizing that the impurity concentration is largely fixed, strengthening of this transition indicates an increase in the number of nitrogen vacancies. Switching, therefore, creates vacancies in Al 0.93 B 0.07 N likely due to hot-atom damage induced by the aggressive fields necessary to switch wurtzite materials that ultimately limits endurance.

36 MATERIALS SCIENCE↗
DOE OSTI2024

The anti-aromatic dianion and aromatic tetraanion of [18]annulene

π-Conjugated macrocycles behave differently from analogous linear chains because their electronic wavefunctions resemble a quantum particle on a ring, leading to aromaticity or anti-aromaticity. [18]Annulene, (CH) 18 , is the archetypal non-benzenoid aromatic hydrocarbon. Molecules with circuits of 4 n +2 π electrons, such as [18]annulene ( n =4), are aromatic, with enhanced stability and diatropic ring currents (magnetic shielding inside the ring), whereas those with 4 n π electrons, such as the dianion of [18]annulene, are expected to be anti-aromatic and exhibit the opposite behaviour. Here we use 1 H NMR spectroscopy to re-evaluate the structure of the [18]annulene dianion. We also show that it can be reduced further to an aromatic tetraanion, which has the same shape as the dianion. The crystal structure of the tetraanion lithium salt confirms its geometry and reveals a metallocene-like sandwich, with five Li + cations intercalated between two [18]annulene tetraanions. We also report a heteroleptic sandwich, with [18]annulene and corannulene tetraanion decks.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Virus diversity and activity is driven by snowmelt and host dynamics in a high-altitude watershed soil ecosystem

Background: Viruses impact nearly all organisms on Earth, including microbial communities and their associated biogeochemical processes. In soils, highly diverse viral communities have been identified, with a global distribution seemingly driven by multiple biotic and abiotic factors, especially soil temperature and moisture. However, our current understanding of the stability of soil viral communities across time and their response to strong seasonal changes in environmental parameters remains limited. Here, we investigated the diversity and activity of environmental soil DNA and RNA viruses, focusing especially on bacteriophages, across dynamics’ seasonal changes in a snow-dominated mountainous watershed by examining paired metagenomes and metatranscriptomes. Results: We identified a large number of DNA and RNA viruses taxonomically divergent from existing environmental viruses, including a significant proportion of fungal RNA viruses, and a large and unsuspected diversity of positive single-stranded RNA phages ( Leviviricetes ), highlighting the under-characterization of the global soil virosphere. Among these, we were able to distinguish subsets of active DNA and RNA phages that changed across seasons, consistent with a “seed-bank” viral community structure in which new phage activity, for example, replication and host lysis, is sequentially triggered by changes in environmental conditions. At the population level, we further identified virus-host dynamics matching two existing ecological models: “Kill-The-Winner” which proposes that lytic phages are actively infecting abundant bacteria, and “Piggyback-The-Persistent” which argues that when the host is growing slowly, it is more beneficial to remain in a dormant state. The former was associated with summer months of high and rapid microbial activity, and the latter with winter months of limited and slow host growth. Conclusion: Taken together, these results suggest that the high diversity of viruses in soils is likely associated with a broad range of host interaction types each adapted to specific host ecological strategies and environmental conditions. As our understanding of how environmental and host factors drive viral activity in soil ecosystems progresses, integrating these viral impacts in complex natural microbiome models will be key to accurately predict ecosystem biogeochemistry.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Editorial: Generation, detection and manipulation of skyrmions in magnetic nanostructures

Due to their compact shape and small size down to a few nanometers, good thermal stability, and low driven current density, magnetic skyrmions have become promising building blocks for high-density storage and fast information processing applications. In a dozen years, this field dubbed as skyrmionics has attracted significant attention for exploring fundamental physics as well as for practical applications.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Low-Power, Flexible Sensor Arrays with Solderless Board-to-Board Connectors for Monitoring Soil Deformation and Temperature

Landslides are a global and frequent natural hazard, affecting many communities and infrastructure networks. Technological solutions are needed for long-term, large-scale condition monitoring of infrastructure earthworks or natural slopes. However, current instruments for slope stability monitoring are often costly, require a complex installation process and/or data processing schemes, or have poor resolution. Wireless sensor networks comprising low-power, low-cost sensors have been shown to be a crucial part of landslide early warning systems. Here, we present the development of a novel sensing approach that uses linear arrays of three-axis accelerometers for monitoring changes in sensor inclination, and thus the surrounding soil’s deformation. By combining these deformation measurements with depth-resolved temperature measurements, we can link our data to subsurface thermal–hydrological regimes where relevant. In this research, we present a configuration of cascaded I2C sensors that (i) have ultra-low power consumption and (ii) enable an adjustable probe length. From an electromechanical perspective, we developed a novel board-to-board connection method that enables narrow, semi-flexible sensor arrays and a streamlined assembly process. The low-cost connection method relies on a specific FR4 printed circuit board design that allows board-to-board press fitting without using electromechanical components or solder connections. The sensor assembly is placed in a thin, semi-flexible tube (inner diameter 6.35 mm) that is filled with an epoxy compound. The resulting sensor probe is connected to an AA-battery-powered data logger with wireless connectivity. We characterize the system’s electromechanical properties and investigate the accuracy of deformation measurements. Our experiments, performed with probes up to 1.8 m long, demonstrate long-term connector stability, as well as probe mechanical flexibility. Furthermore, our accuracy analysis indicates that deformation measurements can be performed with a 0.390 mm resolution and a 95% confidence interval of ±0.73 mm per meter of probe length. This research shows the suitability of low-cost accelerometer arrays for distributed soil stability monitoring. In comparison with emerging low-cost measurements of surface displacement, our approach provides depth-resolved deformation, which can inform about shallow sliding surfaces.

deformation monitoring↗
NASA NTRS1970

Slow-speed drives for miniature devices

Hysteresis motor minimizes motor torque variations during shaft revolution when operated at high frequency and with a sinusoidal motor current. Motor speed is stabilized by a feedback servo.

Bahm, E. J.↗
NASA NTRS1977

The tantalum-cased tantalum capacitor

Tantalum-cased tantalum capacitors were tested with regard to temperature stability, capacitance ratio, surge current capabilities, shock, vibration, and thermal shock. They were found to be superior to the conventional wet slug tantalum capacitor cased in silver, since they are more resistant to sulfuric acid. The tantalum-cased tantalum capacitors are widely accepted for use in critical electronic equipment because of their excellent performance and reliability.

Moynihan, J. D.↗