Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Conversion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Enhanced energy conversion efficiency promoted by cavitation in gasoline direct injection

High-pressure direct fuel injection plays the most crucial role in energy conversion and improving engine combustion efficiency and emission. The optimization of turbulent and multiphase fuel injection has focused on controlling hydrodynamic parameters such as injection pressure. While the thermodynamic influence is often considered in the flash boiling situation, we inquire into how gasoline-type fuel’s hydro- and thermodynamic properties impact the injection dynamics by fuel-temperature induced cavitation. The turbulent and cavitating flows emanating from the direct-injection nozzle is visualized by ultrafast x-ray imaging with an unprecedented spatiotemporal resolution. The ultrafast liquid-fuel dynamics are dominated by injection pressure as well as fuel temperature through cavitation, an important thermodynamic parameter but often difficult to control in engine combustion. With the most direct and quantitative measurement, we discovered that the near-nozzle fuel-jet dynamics can be perfectly scaled by a single dimensionless parameter, cavitation number, particularly sensitive to the fuel temperature, in a wide operation range. This universal scaling shows that cavitation can be harnessed to elevate the pneumatic-hydraulic to kinetic energy conversion efficiency, critical for promoting fuel atomization and engine combustion performance. This enhancement effect will have even more impact on engine combustion using alternative low-emission fuels with higher saturated vapor pressure.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2024

ACS Spotlight: Bipolar Membranes for Electrochemical Energy Conversion, Chemical Manufacturing, and Separations

Sustainable energy conversion, chemical manufacturing, and separations are central to addressing the world’s energy and environmental challenges. Electrochemical platforms stand as a cornerstone in addressing these challenges because they are low exergy and can be powered on renewable electrons. In electrochemical systems, bipolar membranes (BPMs) are emerging as a unique class of ion exchange membranes poised to revolutionize various electrochemical processes via pH control of anode and cathode chambers and in situ pH adjustment. In this Spotlight Review, we provide a comprehensive review of electrochemical platforms utilizing BPMs for energy conversion (water electrolyzers for hydrogen production, fuel cells, and flow batteries), chemical manufacturing (electrolyzers that convert carbon dioxide into value-added chemicals and nitrate into ammonia), and separations. The motivation for using BPMs, as well as their performance and durability, in electrochemical platforms are disseminated. We also discuss current challenges that impede BPM electrochemical systems from competing with state-of-the-art electrochemical systems using monopolar ion-exchange membranes (e.g., anion/hydroxide exchange membranes and cation/proton exchange membranes). Here, the review also covers molecular modeling and continuum modeling efforts to understand the basic mechanisms that govern BPM performance.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2023

Highly Tunable Syngas Product Ratios Enabled by Novel Nanoscale Hybrid Electrolytes Designed for Combined CO 2 Capture and Electrochemical Conversion

Coupling renewable energy with the electrochemical conversion of CO 2 to chemicals and fuels has been proposed as a strategy to achieve a new circular carbon economy and help mitigate the effects of anthropogenic CO 2 emissions. Liquid-like Nanoparticle Organic Hybrid Materials (NOHMs) are composed of polymers tethered to nanoparticles and are previously explored as CO 2 capture materials and electrolyte additives. Here, in this study, two types of aqueous NOHM-based electrolytes are prepared to explore the effect of CO 2 binding energy (i.e., chemisorption versus physisorption) on CO 2 electroreduction over a silver nanoparticle catalyst for syngas production. Poly(ethylenimine) (PEI) and Jeffamine M2070 (HPE) are ionically tethered to SiO 2 nanoparticles to form the amine-containing NOHM-I-PEI and ether-containing NOHM-I-HPE, respectively. At less negative cathode potentials, PEI and NOHM-I-PEI-based electrolytes produce CO at higher rates than 0.1 molal. KHCO 3 due to favorable catalyst-electrolyte interactions. Whereas at more negative potentials, H 2 production is favored because of the carbamate electrochemical inactivity. Conversely, HPE and NOHM-I-HPE-based electrolytes display poor CO 2 reduction performance at less negative potentials. At more negative potentials, their performance approached that of 0.1 molal. KHCO 3 , highlighting how the polymer functional groups of NOHMs can be strategically selected to produce value-added products from CO 2 with highly tunable compositions.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Toward High Conversion Efficiency of Thermoelectric Modules through Synergistical Optimization of Layered Materials

Abstract Waste‐heat electricity generation using high‐efficiency solid‐state conversion technology can significantly decrease dependence on fossil fuels. Here, a synergistical optimization of layered half‐Heusler (hH) materials and module to improve thermoelectric conversion efficiency is reported. This is realized by manufacturing multiple thermoelectric materials with major compositional variations and temperature‐gradient‐coupled carrier distribution by one‐step spark plasma sintering. This strategy provides a solution to overcome the intrinsic concomitants of the conventional segmented architecture that only considers the matching of the figure of merit ( zT ) with the temperature gradient. The current design is dedicated to temperature‐gradient‐coupled resistivity and compatibility matching, optimum zT matching, and reducing contact resistance sources. By enhancing the quality factor of the materials by Sb‐vapor‐pressure‐induced annealing, a superior zT of 1.47 at 973 K is achieved for (Nb, Hf)FeSb hH alloys. Along with the low‐temperature high‐ zT hH alloys of (Nb, Ta, Ti, V)FeSb, the single stage layered hH modules are developed with efficiencies of ≈15.2% and ≈13.5% for the single‐leg and unicouple thermoelectric modules, respectively, under Δ T of 670 K. Therefore, this work has a transformative impact on the design and development of next‐generation thermoelectric generators for any thermoelectric material families.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2024

In Situ Conversion of Artificial Proton‐Rich Shell to Inorganic Maskant Toward Stable Single‐Crystal Ni‐Rich Cathode

Single-crystal high-nickel oxide with an integral structure can prevent intergranular cracks and the associated detrimental reactions. Yet, its low surface-to-volume ratio makes surficial degradation a more critical factor in electrochemical performance. Herein, artificial proton-rich (ammonium bicarbonate) shell is successfully introduced on the nickel-rich LiNi 0.92 Co 0.06 Mn 0.02 O 2 single crystals for in situ electrochemically conversing into inorganic maskant to enhance stability of cathode. The process is that the surficial enriched proton, once released from the ammonium bicarbonate shell (proton reservoir) during 1st charge, is immediately captured by LiPF 6 , in situ electrochemically conversing to LiF and Li 3 PO 4 sub-nano particle dense maskant (sub-nano F-&P-maskant). The in situ formed compact nano F-&P-maskant significantly resists the cathode against electrolyte attack and improves the surface stability of particles during long-term cycling. Consequently, this surface modification enables 95% capacity retention after 100 cycles at a high voltage of 4.5 V in the half cell and 83% capacity retention after 800 cycles in the full cell. In conclusion, this work demonstrates a strategy for reconstructing the protective layer using the rational design of surficial enriched proton shells for advanced lithium batteries.

25 ENERGY STORAGE↗
DOE OSTI2025

Engineering PdAu/CeO 2 Alloy/Oxide Interfaces for Selective Methane‐to‐Methanol Conversion with Water

The direct conversion of methane-to-methanol remains a critical challenge in methane valorization. In this study, we unveil the crucial role of PdAu/CeO 2 catalysts in enabling selective methane transformation under mild conditions, using only water as the sole oxidant. Through a combination of experimental techniques, including XPS and catalytic testing, alongside density functional theory (DFT) calculations, we demonstrate that a Pd 0.3 Au 0.7 /CeO 2 catalyst, which predominantly exposes isolated Pd atoms, achieves remarkable methanol selectivity (∼80%) at 500 K with a 1:1 methane-to-water ratio. While Pd/CeO 2 efficiently activates methane, its tendency for overreaction leads to complete methanol decomposition, thereby limiting selectivity. Alloying Pd with Au on ceria mitigates this over-reactivity, preventing methanol degradation while maintaining sufficient catalytic activity. The PdAu/CeO 2 composite exhibits a synergistic effect: Pd in contact with the ceria support facilitates methane activation and water dissociation, while Au fine-tunes reactivity to promote methanol formation. DFT calculations confirm that isolated Pd sites at the PdAu/CeO 2 interface play a key role in balancing activity and selectivity. This work underscores the importance of alloy/oxide interfaces in controlling selective methane conversion with water and offers valuable insights for designing highly efficient catalysts for methanol synthesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Impurity Control in Catalyst Design: The Role of Sodium in Promoting and Stabilizing Co and Co 2 C for Syngas Conversion

The design of supported heterogeneous catalysts requires a detailed understanding of the structure and chemistry of the active surface. Although the chemical components of the active phase, support material, and process feed are typically considered to be the most important factors governing catalyst structure and performance, many common commercial supports contain trace impurities, which can have profound effects on catalyst properties. In this work, we study silica–supported cobalt–based catalysts, which are widely used in syngas conversion to value–added products. Supported metallic Co is a commercial Fischer–Tropsch catalyst, whereas Co 2 C has shown promise for the direct conversion of syngas to higher oxygenates. This study examines the effects of Na, a commonly detected support impurity and a frequently used promoter, on the structure and reactivity of Co and Co 2 C. We show that trace Na impurities significantly decrease catalyst activity of supported metallic Co, and that high Na concentrations result in Co 2 C formation and a loss in Fischer–Tropsch activity. However, in Co 2 C catalysts, Na plays an important role in stabilizing the Co 2 C phase, but excess Na decreases catalyst activity. We use insitu X–ray absorption spectroscopy to study Co 2 C formation and decomposition in the Na–free catalyst under carburization and reaction conditions. Lastly, the work reveals the importance of carefully controlling alkali metal content, particularly at trace levels, in catalyst design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Zeolite‐Based Catalysts for Conversion of Oxygenated Polymer Waste by Positron Annihilation

Positron Annihilation Lifetime Spectroscopy (PALS) has been employed to investigate the catalysts HZSM-5 and MESO−Y, which play a pivotal role in catalyzing and upgrading plastics, with a primary focus on oxygenated polymers, thereby transforming existing plastic materials into simpler, higher-quality value-added products. Here, in this study, PALS was systematically compared with other complementary analytical techniques. The research outcomes have successfully demonstrated the efficacy of PALS in elucidating the morphology and topology of zeolites at micro/meso-meter scales. The first experiment focuses on H-ZSM-5 zeolite subjected to treatments involving polyurethane and polypropylene. The second experiment delves into H-ZSM-5 zeolites with varying Si/Al ratios, both before and after conversion. The third experiment investigates Y zeolites that are surfactant templated to induce meso-porosity, examining their fresh state as well as their post-conversion condition. The PALS analysis was supplemented by BET (Brunauer-Emmett-Teller) analysis and NMR (Nuclear Magnetic Resonance) spectroscopies. Notably, PALS exhibits superior sensitivity, at the sub-nanometer scale, suggesting its potential as a preferred complementary method for catalysis studies. In conclusion, the integration of PALS into the repertoire of analytical tools enhances our understanding of catalyst behavior and catalytic processes, offering valuable insights for the advancement of plastic recycling and catalysis research.

32 - ENERGY CONSERVATION, CONSUMPTION, AND UTILIZA↗
DOE OSTI2025

The effect of copper additives on hybrid Zr-based chemical conversion coating morphology and chemical compositions

In the realm of corrosion protection, Zr-based conversion coatings offer an environmentally friendly, chromate-free alternative to conventional coating. This study uses advanced X-ray, electron microscopy and electrochemical testing techniques to better understand the impact of varying Cu²⁺ ion concentrations on the characteristics of Zr-based coatings on Fe substrates. Our findings demonstrate that within the tested conditions, higher Cu²⁺ additive concentrations at 40 ppm enhance surface characteristics, increasing stability towards anti-corrosion capability, particularly under NaCl treatment. Conversely, at a lower Cu²⁺ concentration of 20 ppm, coatings exhibited more significant dissolution of Cu clusters and increased vulnerability to chloride-induced degradation. X-ray photoelectron spectroscopy and synchrotron X-ray fluorescence (XRF) and X-ray absorption near edge structure (XANES) spectroscopy analyses revealed Cu²⁺ formation in Cu20, while Cu40 retained its metallic state (Cu⁰) with a slower reaction rate. Cu20 offers some protection but lacks durability, whereas in Cu40, lower I corr , and enhance corrosion resistance, making it ideal for protective coatings in salt-water environments. This study underscores the importance of balancing Cu²⁺ ions concentration in the coating solution to optimize performance, highlighting the role of Cu in enhancing both surface properties and long-term stability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Integrated reactor architecture of conductive network and catalytic nodes to accelerate polysulfide conversion for durable and high-loading Li-S batteries

The development of carbon-based heterogeneous framework host with synergistic catalytic and conductive effects for sulfur cathode is a promising strategy to realize high performance lithium sulfur batteries (LSBs). Here, an integrated reactor architecture with defective carbon nodes (IRA-DC) is designed for serving as high-loading (92.4 wt%) sulfur host. The hierarchical porous IRA-DC consists of untangled conductive carbon nanotube network and Co/N co-doped catalytic nodes with high dispersity. Therein the optimization of electric field distribution and homogenization of adsorption-catalysis sites offer the multi-electron conversion reaction of polysulfides with excellent kinetics and stability. The resultant IRA-DC/S cathode enables a high areal capacity of 8.86 mAh cm -2 under ultra-high sulfur loading (13.1 mg cm -2 ) and lean electrolyte (8 μL mg sulfur -1 ). It also displays a long-term cycling performance (1200 cycles at 1 C) and ultrahigh rate performance up to 20 C (with a capacity of 473.6 mAh g -1 ). In conclusion, this work provides an electrode building strategy by optimizing the environments of heterogeneous electrocatalysis and micro electric field to activate the polysulfide conversion efficiency and utilization of high-loading sulfur in monolithic sulfur-carbon cathodes.

25 ENERGY STORAGE↗
DOE OSTI2026

Opportunities and challenges in thermochemical conversion of municipal solid waste: A comprehensive review

Recent advancements in thermochemical conversion processes have elucidated new pathways for converting municipal solid waste into valuable resources. This review explores the primary thermochemical conversion methods, including combustion, gasification, pyrolysis, torrefaction, hydrothermal carbonization, and hydrothermal liquefaction, emphasizing their potential roles in waste management and energy recovery. Key challenges including feedstock variability, ash behavior, and scale-up limitations are discussed alongside opportunities for hybrid systems and circular economy integration. A comparative analysis of research publications indicates a significant focus on thermochemical pathways within the broader context of municipal solid waste research, underscoring the growing interest in these technologies. Recent advancements in each thermochemical process, alongside their operational, technical, and economic challenges, are discussed. Comparative data reveal that torrefaction enhances the hydrophobicity and grindability of municipal solid waste components, though its energy densification benefits are more modest than those observed in biomass. Hydrothermal carbonization and liquefaction are highlighted for their ability to process high-moisture and heterogeneous waste streams. The review also synthesizes recent findings on reactor configurations, emissions control, and synergistic effects in co-processing municipal solid waste fractions. The findings underscore the importance of developing standardized protocols for municipal solid waste characterization and the need for innovative hybrid systems to improve efficiency.

99 - GENERAL AND MISCELLANEOUS↗
DOE OSTI2020

Enhanced alcohol production over binary Mo/Co carbide catalysts in syngas conversion

Recently metal carbide catalysts have attracted attention as alternatives to pure metals for the conversion of syngas to higher oxygenates, a process which could enable the sustainable production of fuels, polymers, and chemicals. Although Mo and Co carbides have both shown promise for higher oxygenate production, they have not achieved the requisite activity and selectivity for practical implementation. In this work we synthesize and characterize a binary Mo and Co carbide catalyst that exhibits improved activity and oxygenate selectivity relative to either pure metal carbide. In this work, we apply a combination of advanced electron microscopy and X-ray diffraction to show that the binary Mo/Co carbide catalyst forms uniformly mixed amorphous nanoparticles. Through in situ X-ray absorption spectroscopy studies, we determine that the structure of the mixed metal carbide catalyst under reaction conditions consists of both carbidic and bimetallic components. By testing the catalytic properties of a series of Mo/Co carbide catalysts prepared by different synthesis methods, we find that the Mo and Co sites must be in close contact to achieve improved syngas conversion to higher alcohols. Through in situ DRIFTS measurements, both Mo and Co atoms at the surface of the catalyst are identified as adsorption sites for reactive species.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Bayesian optimization of entropy-stabilized metal fluoride conversion cathodes and their synthesis

Fluoride-based conversion cathodes are promising for next-generation Li ion batteries because of their high voltage and energy densities. High entropy earth abundant fluoride cathodes are attractive for sustainable battery because of the potentially higher cycling stability. While Ni and Co containing equimolar alloys stabilized by high entropy were considered previously, Ni and Co free non-equimolar metal alloy compositions might offer new opportunities to increase materials stability and average voltage. This opportunity was pursued using Bayesian optimization of average voltage for the computational prediction of (Fe x1 Cu x2 Zn x3 Mn x4 Mg x5 )F 2 cathode chemistries. Theoretical voltage, room temperature free energy, and electronic structure of potentially high voltage compositions were computed using density functional theory calculations. Here, the experimental realization of non-equimolar quinary Co and Ni free fluorides with stable rutile single phase and improved conversion reaction voltage by up to 28 % compared to the equimolar alloy demonstrated the power of Bayesian optimization methods for the computationally guided experimental synthesis of fluoride cathodes. Finally, non-equimolar cathode chemistries were found with cycling stability superior to known multi-element fluorides.

25 ENERGY STORAGE↗
DOE OSTI2023

Neutron stars as photon double-lenses: Constraining resonant conversion into ALPs

Axion-photon conversion is a prime mechanism to detect axion-like particles that share a coupling to the photon. We point out that in the vicinity of neutron stars with strong magnetic fields, magnetars, the effective photon mass receives comparable but opposite contributions from free electrons and the radiation field. This leads to an energy-dependent resonance condition for conversion that can be met for arbitrary light axions and leveraged when using systems with detected radio component. Using the magnetar SGR J1745-2900 as an exemplary source, we demonstrate that sensitivity to |g aγ | ~ 10 -12 GeV -1 or better can be gained for m a ≲ 10 -6 eV, with the potential to improve current constraints on the axion-photon coupling by more than one order of magnitude over a broad mass range. With growing insights into the physical conditions of magnetospheres of magnetars, the method hosts the potential to become a serious competitor to future experiments such as ALPS-II and IAXO in the search for axion-like particles.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Ionomers for electrochemical energy conversion & storage technologies

We report ionomers, which are used as polymer electrolyte membranes as well as catalyst binders in membrane electrode assemblies, are a key component of electrochemical energy conversion and storage technologies such as fuel cells, electrolyzers, and flow batteries. The use of ionomers in these clean energy technologies has a long history and there has been considerable progress in developing low-cost, high-performance ionomers in recent years. In this review article, we discuss some highlights from recent developments of ionomers with emphasis on chemically stable, mechanically durable, high-performance hydrocarbon ionomers and their state-of-the-art performance in electrochemical energy conversion devices. Future directions of ionomer research that are important to enhance our understanding and the remaining challenges related to device level applications are addressed.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Frequency Conversion in a Time-Variant Dielectric Metasurface

The color of light is a fundamental property of electromagnetic radiation; as such, control of the frequency is a cornerstone of modern optics. Nonlinear materials are typically used to generate new frequencies, however the use of time-variant systems provides an alternative approach. Utilizing a metasurface that supports a high-quality factor resonance, we demonstrate that a rapidly shifting refractive index will induce frequency conversion of light that is confined in the nanoresonator meta-atoms. We experimentally observe this frequency conversion and develop a time-dependent coupled mode theory model that well describes the system. Finally, the intersection of high quality-factor resonances, active materials, and ultrafast transient spectroscopy leads to the demonstration of metasurfaces operating in a time-variant regime that enables enhanced control over light–matter interaction.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2024

Numerical Simulation of Light to Heat Conversion by Plasmonic Nanoheaters

Plasmonic nanoparticles are widely recognized as photothermal conversion agents, i.e., nanotransducers or nanoheaters. Translation of these materials into practical applications requires quantitative analyses of their photothermal conversion efficiencies (η). However, the value of η obtained for different materials is dramatically influenced by the experimental setup and method of calculation. Here, we evaluate the most common methods for estimating η (Roper’s and Wang’s) and compare these with numerical estimates using the simulation software ANSYS. Experiments were performed with colloidal gold nanorod solutions suspended in a hanging droplet irradiated by an 808 nm diode laser and monitored by a thermal camera. The ANSYS simulations accounted for both heating and evaporation, providing η values consistent with the Wang method but higher than the Roper approach. This study details methods for estimating the photothermal efficiency and finds ANSYS to be a robust tool where experimental constraints complicate traditional methods.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2024

Electrolyte–Electrocatalyst Interfacial Effects of Polymeric Materials for Tandem CO 2 Capture and Conversion Elucidated Using In Situ Electrochemical AFM

Integrating CO 2 capture and electrochemical conversion has been proposed as a strategy to reduce the net energy required for CO 2 regeneration in traditional CO 2 capture and conversion schemes and can be coupled with carbon-free renewable electricity. Polyethylenimine (PEI)-based materials have been previously studied as CO 2 capture materials and can be integrated in these reactive capture processes. PEI-based electrolytes have been found to significantly increase the CO 2 loading, and impact selectivity and rate of product formation when compared to the conventional aqueous electrolytes. However, the influence of these materials at the catalyst–electrode interface is currently not well understood. In this study, PEI-based electrolytes were prepared and their impact on the morphology of a silver electrode performing electrochemical CO 2 reduction (CO 2 R) was studied using in situ electrochemical atomic force microscopy (EC-AFM). The presence of PEI on the electrode surface could be distinguished based on nanomechanical properties (DMT modulus), and changes were observed as negative polarization was applied, revealing a reorganization of the PEI chains due to electrostatic interactions. These changes were impacted by the electrolyte composition, including the addition of supporting electrolyte KHCO 3 salt, as well as CO 2 captured by the PEI-based electrolyte, which minimized the change in surface mechanical properties and degree of PEI alignment on the electrode surface. The changes in surface mechanical properties were also dependent on the PEI polymer length, with higher molecular weight PEI showing different reconfiguration than the shorter polymer brushes. The study highlights that the choice of polymer material, the electrolyte composition, and CO 2 captured impact the nearelectrode environment, which has implications for CO 2 R, and presents EC-AFM as a new tool that can be used to probe the dynamic behavior of these interfaces during electrocatalysis.

36 MATERIALS SCIENCE↗