Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Cluster dynamics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Swelling In Light Water Reactor Internal Components: Insights from Computational Modeling

A modern cluster dynamics model has been used to investigate the materials and irradiation parameters that control microstructural evolution under the relatively low-temperature exposure conditions that are representative of the operating environment for in-core light water reactor components. The focus is on components fabricated from austenitic stainless steel. The model accounts for the synergistic interaction between radiation-produced vacancies and the helium that is produced by nuclear transmutation reactions. Cavity nucleation rates are shown to be relatively high in this temperature regime (275 to 325°C), but are sensitive to assumptions about the fine scale microstructure produced under low-temperature irradiation. The cavity nucleation rates observed run counter to the expectation that void swelling would not occur under these conditions. This expectation was based on previous research on void swelling in austenitic steels in fast reactors. This misleading impression arose primarily from an absence of relevant data. The results of the computational modeling are generally consistent with recent data obtained by examining ex-service components. However, it has been shown that the sensitivity of the model s predictions of low-temperature swelling behavior to assumptions about the primary damage source term and specification of the mean-field sink strengths is somewhat greater that that observed at higher temperatures. Further assessment of the mathematical model is underway to meet the long-term objective of this research, which is to provide a predictive model of void swelling at relevant lifetime exposures to support extended reactor operations.

36 MATERIALS SCIENCE↗

NEAMS-ATF M3 Milestone Report: Literature Review of Modeling of Radiation-Induced Swelling in Fe-Cr-Al Steels

Fe-Cr-Al steels are proposed as accident-tolerant-fuel (ATF) cladding materials in light water reactors due to their excellent oxidation resistance at high temperatures. Currently, the understanding of their performance in reactor environment is still limited. In this review, firstly we reviewed the experimental studies of Fe-Cr-Al based alloys with particular focus on the radiation effects in these alloys. Although limited data are available in literature, several previous and recent experimental studies have shown that Fe-Cr-Al based alloys have very good void swelling resistance at low and moderate irradiation doses but the growth of dislocation loops is very active. Overall, the behavior of radiation damage evolution is similar to that in Fe-Cr ferritic/martensitic alloys. Secondly, we reviewed the rate theory-based modeling methods for modeling the coevolution of voids and dislocation loops in materials under irradiation such as Frenkel pair three-dimensional diffusion model (FP3DM) and cluster dynamics. Finally, we summarized and discussed our review and proposed our future plans for modeling radiation damage in Fe-Cr-Al based alloys.

36 MATERIALS SCIENCE↗

Report on fundamental modeling of irradiation-induced swelling and creep in FeCrAl alloys

In order to improve the accident tolerance of light water reactor (LWR) fuel, alternative cladding materials have been proposed to replace zirconium (Zr)-based alloys. Of these materials, there is a particular focus on iron-chromium-aluminum (FeCrAl) alloys due to much slower oxidation kinetics in high-temperature steam than Zr-alloys. This should decrease the energy release due to oxidation and allow the cladding to remain integral longer in the presence of high temperature steam, making accident mitigation more likely. As a continuation of the development for these alloys, the material response must be demonstrated to provide suitable radiation stability, in order to ensure that there will not be significant dimensional changes (e.g., swelling), as well as quantifying the radiation hardening and radiation creep behavior. In this report, we describe the use of cluster dynamics modeling to evaluate the defect physics and damage accumulation behavior of FeCrAl alloys subjected to neutron irradiation, with a particular focus on irradiation-induced swelling and defect fluxes to dislocations that are required to model irradiation creep behavior.

36 MATERIALS SCIENCE↗

Behavior of U 3 Si 2 Fuel and FeCrAl Cladding under Normal Operating and Accident Reactor Conditions

As part of the Department of Energy's Nuclear Energy Advanced Modeling and Simulation program, an Accident Tolerant Fuel High Impact Problem was initiated at the beginning of fiscal year 2015 to investigate the behavior of \usi~fuel and iron-chromium-aluminum (FeCrAl) claddings under normal operating and accident reactor conditions. The High Impact Problem was created in response to the United States Department of Energy's renewed interest in accident tolerant materials after the events that occurred at the Fukushima Daiichi Nuclear Power Plant in 2011. The High Impact Problem is a multinational laboratory and university collaborative research effort between Idaho National Laboratory, Los Alamos National Laboratory, Argonne National Laboratory, and the University of Tennessee, Knoxville. This report primarily focuses on the engineering scale research in fiscal year 2016 with brief summaries of the lower length scale developments in the areas of density functional theory, cluster dynamics, rate theory, and phase field being presented.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Nuclear Energy Advanced Modeling and Simulation (NEAMS) Accident Tolerant Fuels High Impact Problem: Coordinate Multiscale FeCrAl Modeling

Since the events at the Fukushima-Daiichi nuclear power plant in March 2011 significant research has unfolded at national laboratories, universities and other institutions into alternative materials that have potential enhanced ac- cident tolerance when compared to traditional UO2 fuel zircaloy clad fuel rods. One of the potential replacement claddings are iron-chromium-alunimum (FeCrAl) alloys due to their increased oxidation resistance [1–4] and higher strength [1, 2]. While the oxidation characteristics of FeCrAl are a benefit for accident tolerance, the thermal neu- tron absorption cross section of FeCrAl is about ten times that of Zircaloy. This neutronic penalty necessitates thinner cladding. This allows for slightly larger pellets to give the same cold gap width in the rod. However, the slight increase in pellet diameter is not sufficient to compensate for the neutronic penalty and enriching the fuel beyond the current 5% limit appears to be necessary [5]. Current estimates indicate that this neutronic penalty will impose an increase in fuel cost of 15-35% [1, 2]. In addition to the neutronic disadvantage, it is anticipated that tritium release to the coolant will be larger because the permeability of hydrogen in FeCrAl is about 100 times higher than in Zircaloy [6]. Also, radiation-induced hardening and embrittlement of FeCrAl need to be fully characterized experimentally [7]. Due to the aggressive development schedule for inserting some of the potential materials into lead test assemblies or rods by 2022 [8] multiscale multiphysics modeling approaches have been used to provide insight into these the use of FeCrAl as a cladding material. The purpose of this letter report is to highlight the multiscale modeling effort for iron-chromium-alunimum (FeCrAl) cladding alloys as part of the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program through its Accident Tolerant Fuel (ATF) High Impact Problem (HIP). The approach taken throughout the HIP is to utilize lower length scale approaches (e.g., density functional theory, cluster dynamics, rate theory, phase field, and Visco-Plastic- Self-Consistent (VPSC)) to develop more physically informed models at the engineering scale for use in the BISON [9] fuel performance code.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Irradiation enhanced diffusion and diffusional creep in U₃Si₂

U₃Si₂ is a candidate as an advanced fuel for light water reactors (LWRs). Compared to UO₂, there are significant data gaps for the thermophysical and thermomechanical properties of U₃Si₂. Atomic scale simulations can help fill in those gaps, while also providing a more mechanistic understanding of the material properties. Creep is an important property for fuel performance as it influences the pellet-cladding gap, which in turn affects the temperature of the fuel (a key parameter in many other aspects of fuel behavior). In this work, we employed a DFT-informed cluster dynamics framework to predict point defect concentrations in U₃Si₂. The concentrations, diffusivities, and volumes of these defects were used to develop a diffusional creep model based on bulk (Nabarro-Herring) and grain boundary (Coble) diffusion processes. It was found that irradiation enhanced Nabarro-Herring creep is dominant at low temperatures, while Coble creep dominates for high temperatures. The model compares well against available experimental data and has been implemented in BISON. A demonstration case using simple power profiles has been carried out, showing that negligible creep occurs due to the low temperatures experienced by U₃Si₂, a consequence of its high thermal conductivity.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Implementation and testing of physics-based pulverization model in BISON

This report summarizes lower length scale computational research conducted to improve the pulverization criterion for high-burnup UO 2 fuel in the BISON fuel performance code. This research was sponsored by the NEAMS program during FY22. Efforts to improve the model primarily focus on calculating the current pressure of bubbles in the high-burnup structure (HBS) region, as well as the critical bubble pressure at which pulverization occurs in the HBS. The phase-field model for predicting initial bubble pressure in the HBS was improved by implementing a more realistic model for defect production, and by coupling the phase-field model for inter-granular bubble evolution with the spatially-resolved cluster dynamics code Xolotl to simulate intra-granular fission gas evolution. An evolution equation for current bubble pressure was added to BISON, an improvement over the previous model that assumed that bubble pressure was static following HBS formation. To improve calculations of critical bubble pressure for pulverization, 3-D phase-field fracture simulations were performed, and a function for critical bubble pressure was fit—based on the simulation results—to replace the previous function, which had been determined using 2-D simulations. The impacts of these modifications to the existing pulverization assessment cases will be reported in the forthcoming engineering scale milestone on high-burnup UO 2 pulverization. A poromechanics-based approach was used to include the effect of bubble over pressurization on the stress state of the pellet at the engineering scale, and the initial strategy for integration of the pulverization criterion with pellet-scale mechanical degradation using a smeared cracking model was developed. This report also describes the initial research that was conducted to inform a forthcoming transient fission gas release (tFGR) model in BISON. Focusing on the fission gas release caused by pulverization of the outer pellet rim, a model for the amount of fission gas release was developed as a function of fuel porosity, bubble size, and fragment size. Implementation of this model in BISON and its impact of engineering-scale predictions will also be described in the aforementioned engineering-scale milestone on high-burnup UO 2 pulverization.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Optimal Reconfiguaration and Resilient Control Framework for Real-Time Photopholtaic Dispatch to Manage Critical Infrastructure (ReDis-PV)

The consortium is conducting cutting-edge collaborative research that will allow advancing solar energy’s role in strengthening the resilience of the U.S. electricity grid. The U.S Department of Energy Solar Technologies Office (SETO) has awarded 4.6 million to Professor Sukumar Kamalasadan (The University of North Carolina at Charlotte) for the project “Optimal Reconfiguration and Resilient Control Framework for Real-Time Photovoltaic Dispatch to Manage Critical Infrastructure (ReDis-PV)”. The project developed a grid management tool that detects cyber and physical threats and forms dynamic clusters to manage photovoltaic and energy optimally. The project collaborating team includes the University of North Carolina at Charlotte, Clemson University, New Mexico State University, Florida International University, Argonne National Laboratory, Idaho National Laboratory, OPAL-RT Corporation, and Duke Energy.

14 SOLAR ENERGY↗

Development of Mechanistic Fission Gas Release and Swelling Models for UN Fuels in BISON

This report describes the work in NEAMS (Nuclear Energy Advanced Modeling and Simulation) to develop a mechanistic fission gas model for uranium nitride fuels in BISON. The existing Sifgrs (Simple integrated fission gas release and swelling) model tracks the average properties of two bubble populations in the bulk and at the grain boundaries. It was recognized that dislocations play a crucial role in the fission gas swelling of UN, and an irradiation-induced dislocation density model was needed, as well as a model describing how fission gas interacts with dislocations creating a third population of bubbles along dislocations. A mechanistic model that tracks dislocation bubbles was implemented in Sifgrs. This model was used to simulate fission gas swelling and release in UN. Lower-length-scale calculations and experimental observations from carbide fuel were leveraged to help populate the model with essential parameters. As a placeholder, an empirical function was formulated for the evolution of the dislocation network. Because of the difference in evolution of this network at different temperatures, the dislocation bubbles are able to capture behavior that the bulk intragranular bubbles cannot. It was found that the bulk bubbles dominate microscopic swelling at low temperatures, and the dislocation bubbles dominate at higher temperatures. Based on this model, the transition between the two bubble types is the main factor behind the breakaway swelling phenomenon in UN. In order to test the model, a couple of assessments were run. For the lower temperature JOYO pins, the model produces reasonable fission gas release and swelling values. For the higher temperature SP1 pin, the model dramatically underestimates the fission gas release. This issue is attributed to the gas being trapped inside dislocation bubbles, unable to escape to grain boundaries to cause fission gas release, and could be remedied by a mechanistic dislocation model that allows the dislocation density to decrease at very high temperatures. A preliminary mechanistic dislocation model was developed supported by first-principle calculations. These calculations provided valuable insight into how interstitial defects cluster in UN in the {110} orientation, and may eventually form dislocation loops, leading to the conclusion that dislocation loops may nucleate from these clusters. An estimate of the dislocation line energy in UN was obtained and will be improved in future work. The free-energy cluster dynamics code Centipede was used to track interstitial and vacancy absorption at dislocation loops and calculate their growth. In addition, improvements to Centipede were made including new convergence criteria for transient simulations and sink driving force updates.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Non-Fermi Liquid Behavior in the Three-Dimensional Hubbard Model

We present a numerical study on the non-Fermi liquid behavior of a three-dimensional strongly correlated system. The Hubbard model in a simple cubic lattice is simulated by the dynamical cluster approximation; in particular, the quasi-particle weight is calculated at finite dopings for a range of temperatures. By fitting the quasi-particle weight to the marginal Fermi liquid form at finite doping near the putative quantum critical point, we find evidence of a separatrix between Fermi liquid and non-Fermi liquid regions. Our results suggest that a marginal Fermi liquid and possibly a quantum critical point exist in the non-symmetry broken solution of the three-dimensional interacting electron systems. We also calculate the spectral function, close to the half-filling, and we obtain evidence of pseudogap.

Kellar, Samuel↗

Multiscale Modeling of Nanoparticle Precipitation in Oxide Dispersion-Strengthened Steels Produced by Laser Powder Bed Fusion

Laser Powder Bed Fusion (LPBF) enables the efficient production of near-net-shape oxide dispersion-strengthened (ODS) alloys, which possess superior mechanical properties due to oxide nanoparticles (e.g., yttrium oxide, Y-O, and yttrium-titanium oxide, Y-Ti-O) embedded in the alloy matrix. To better understand the precipitation mechanisms of the oxide nanoparticles and predict their size distribution under LPBF conditions, we developed an innovative physics-based multiscale modeling strategy that incorporates multiple computational approaches. These include a finite volume method model (Flow3D) to analyze the temperature field and cooling rate of the melt pool during the LPBF process, a density functional theory model to calculate the binding energy of Y-O particles and the temperature-dependent diffusivities of Y and O in molten 316L stainless steel (SS), and a cluster dynamics model to evaluate the kinetic evolution and size distribution of Y-O nanoparticles in as-fabricated 316L SS ODS alloys. The model-predicted particle sizes exhibit good agreement with experimental measurements across various LPBF process parameters, i.e., laser power (110–220 W) and scanning speed (150–900 mm/s), demonstrating the reliability and predictive power of the modeling approach. The multiscale approach can be used to guide the future design of experimental process parameters to control oxide nanoparticle characteristics in LPBF-manufactured ODS alloys. Additionally, our approach introduces a novel strategy for understanding and modeling the thermodynamics and kinetics of precipitation in high-temperature systems, particularly molten alloys.

Wang, Zhengming (ORCID:0000000241627112)↗

Toward a Fundamental Understanding of Nuclear Reactions and Exotic Nuclei

Nuclear systems near the drip lines offer an exciting opportunity to advance our understanding of the interactions among nucleons, which has so far been mostly based on the study of stable nuclei. However, this is not a goal devoid of challenges. From a theoretical standpoint, it requires the ca- pability to address within an ab initio framework not only bound, but also resonant and scattering states, all of which can be strongly coupled. In recent years, significant progress has been made in ab initio nuclear structure and reaction calculations based on input from Quantum Chromodynamics employing Hamiltonians constructed within chiral effective field theory. In this contribution, we present a brief overview of one of such methods, the ab initio no-core shell model with continuum, and its applications to nucleon and deuterium scattering on light nuclei. The first investigation of the low-lying continuum spectrum of 6He within an ab initio framework that encompasses the 4He+n+n three-cluster dynamics characterizing its lowest particle-decay channel will also be briefly presented.

Quaglioni, Sofia↗

On the fragmentation of cosmic gas clouds. III - The initial stellar mass function

Radiation from the first opaque protostellar fragments to form in a nonhomologously collapsing molecular cloud can provide a significant heat source in regions where the matter remains relatively diffuse over the initial free-fall time scale. This energy input provides a negative feedback that gradually inhibits fragmentation as larger protostellar fragments form that are also more effective radiators. A highly simplified model is described that yields an expression for the initial mass function in stellar clusters. Dynamical dissipation, driven by the more massive protostars, tends to decouple the gas and grain temperatures and steepen the mass function. Fragmentation of less massive stars appears to proceed more efficiently when the heavy-element abundance is decreased, indicating the possibility of an inverse correlation between gradients in Z and M/L. Other possible observational tests of fragmentation are also suggested.

Silk, J.↗

A study of the x ray environment of radio galaxies

We are currently working on a program to use extensive x-ray and radio databases to investigate the relationship between extended radio emission and environment in clusters of galaxies. The radio galaxy morphology is determined using VLA imaging and the x-ray properties are determined from Einstein IPC images. This study is motivated by the hypothesis that the key to understanding radio galaxies lies in the local environment. To test this hypothesis we have studied the detailed relationship between galaxy radio emission and the x-ray morphology of their parent clusters. In this pilot study we have used 35 radio sources found in 27 clusters. We have determined the position angle of the x-ray and radio emission, and x-ray and radio luminosities. The x-ray position was taken to be the position of peak flux of the subclump containing the radio galaxy. The radio position was taken to be the position of the galaxy. We do not find a correlation between the x-ray and radio source position angle. This remains true when the sample is divided into subsamples according to radio morphology (wide angle tail, twin jet, narrow angle tail galaxies). We find a weak correlation between the radio source luminosity and the x-ray luminosity. We have computed the distance from the radio galaxy position to the center of the x-ray clump. We find a mean distance from the x-ray clump center of 0.16 Mpc for the radio galaxies in this sample. The mean distance to the nearest clump of x-ray emission is typically half the distance to the optical cluster center. We thus find strong evidence that radio galaxies are located very close to clumps of x-ray emission. These subclumps are not always affiliated with the central cluster x-ray emission. This supports our hypothesis that x-ray emission may provide a key to understanding radio galaxy morphology. We find evidence that radio galaxies occur in clusters that contain prominent substructures. Radio galaxies may thus provide an added diagnostic of the cluster dynamical state.

Rhee, George F.↗

Preliminary Analysis of Two Years of the Massive Collision Monitoring Activity

It is hypothesized that the interactions between many of the most massive derelicts in low Earth orbit are more frequent than modeled by the traditional combination of kinetic theory of gases and Poisson probability distribution function. This is suggested by the fact that there are clusters of derelicts where members' inclinations are nearly identical and their apogees/perigees overlap significantly resulting in periodic synchronization of the objects' orbits. In order to address this proposition, an experiment was designed and conducted over the last two years. Results from this monitoring and characterization experiment are presented with implications for proposed debris remediation strategies. Four separate clusters of massive derelicts were examined that are centered around 775km, 850km, 975km, and 1500km, respectively. In aggregate, the constituents of these clusters contain around 500 objects and about 800,000kg of mass; this equates to a third of all derelict mass in LEO. Preliminary analysis indicates that encounter rates over this time period for these objects are greater than is estimated by traditional techniques. Hypothesized dependencies between latitude of encounter, relative velocity, frequency of encounters, inclination, and differential semi-major axis were established and verified. This experiment also identified specific repeatable cluster dynamics that may reduce the cost/risk and enhance the effectiveness of debris remediation activities and also enable new operational debris remediation options.

McKnight, Darren↗

Low-temperature swelling in LWR internal components: a computational assessment

A modern cluster dynamics model has been used to investigate the materials and irradiation parameters that control microstructural evolution under the relatively low-temperature exposure conditions that are representative of the operating environment for in-core light water reactor components. The focus is on components fabricated from austenitic stainless steel. The model accounts for the synergistic interaction between radiation-produced vacancies and the helium that is produced by nuclear transmutation reactions. Cavity nucleation rates are shown to be relatively high in this temperature regime (275 to 325 °C), but are sensitive to assumptions about the fine-scale microstructure produced under low-temperature irradiation. The cavity nucleation rates observed run counter to the expectation that void swelling would not occur under these conditions. This expectation was based on previous research on void swelling in austenitic steels in fast reactors. This misleading impression arose primarily from an absence of relevant data. The results of the computational modeling are generally consistent with recent data obtained by examining ex-service components. The long-term objective of this research is to provide a predictive model of void swelling at relevant lifetime exposures to support extended reactor operations.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

A Case Study of LLVM-Based Analysis for Optimizing SIMD Code Generation

This paper presents a methodology for using LLVM-based tools to tune the DCA++ (dynamical cluster approximation) application that targets the new ARM A64FX processor. The goal is to describe the changes required for the new architecture and generate efficient single instruction/multiple data (SIMD) instructions that target the new Scalable Vector Extension instruction set. During manual tuning, the authors used the LLVM tools to improve code parallelization by using OpenMP SIMD, refactored the code and applied transformation that enabled SIMD optimizations, and ensured that the correct libraries were used to achieve optimal performance. By applying these code changes, code speed was increased by 1.98× and 78 GFlops were achieved on the A64FX processor. The authors aim to automatize parts of the efforts in the OpenMP Advisor tool, which is built on top of existing and newly introduced LLVM tooling.

Huber, Joseph↗

Multiscale modeling for high burnup structure formation and associated pulverization

This report summarizes the lower length scale modeling work performed in the fiscal year 2023 under the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program to capture the microstrutural evolution and associated pulverization criteria in the high burnup regions. This year, the resolution mechanisms within the cluster dynamics code has been updated and it influence on the bubble growth in HBS regions at the mesoscale is studied. To improve the accuracy of phase-field models of fission gas bubble growth, a new Helmholtz free energy for high-density Xe gas is derived from a virial equation of state. Two previously used strategies for representing net vacancy production in phase-field models of fission gas bubble growth are compared with each other and with analytical models of bubble growth. The vacancy source only model is found to be more convenient to parameterize realistically compared with the vacancy source+sink model. Furthermore, the phase-field-fracture simulation have been performed using MD- informed failure stress values and realistic HBS structure obtained from the phase-field simulations. We also present the uncertainty bands on prediction of the critical stress to account for the effect of the lower length scale variabilities on the failure criteria at the mesoscale. It is observed that pulverization may occur in partially restructured regions with restructuring fraction as low as 17%. In light of this, an update to the BISON’s pulverization criteria is recommended.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗