Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Ce”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Low NOx Fuel-Flex Combustor Summary

Combustion and emissions testing of United Technologies Research Center’s (UTRC’s) small core combustor in NASA GRC’s CE-5 flametube test facility comprising of LTO and cruise conditions has been completed. Sufficient NOx emissions data was collected to formulate correlation equations for assessing reductions in NOx for LTO against CAEP/6 and cruise against 2005 best-in-class. Back-to-back testing of Jet-A fuel and a 50/50 blend of Jet-A with an alternative fuel demonstrated a measurable effect of fuel composition on non-volatile particulate matter emissions. Post-test analysis indicates LTO NOx emissions >80% below CAEP6 in UTRC single-sector tests of small-core N+3 combustor. Documentation describing N+3 combustor concept selected, design approach, initial flametube test & analysis results; and preferred concept recommended for higher fidelity research has also been completed. This Lean Burn combustor concept shows potential to meet/exceed NASA’s Far Term LTO NOX reduction goals, but further investigation of dynamic characteristics of the combustor concept are required to ensure good operability over the entire flight regime conditions.

Angela D Surgenor↗

Tree-Ring Reconstruction of the Atmospheric Ridging Feature that Causes Flash Drought in the Central United States Since 1500

Rapid drought intensification, or flash droughts, is often driven by anomalous atmospheric ridging and can cause severe and complex impacts on water availability and agriculture, but the full range of variability of such events in terms of intensity and frequency is unknown. New tree-ring reconstructions of May–July mid-tropospheric ridging and soil moisture anomalies back to 1500 CE in the central United States — a hotspot for flash drought — suggest that over the last five centuries, anomalies in these two variables combined to indicate flash-drought conditions in ~17% of years and exceptionally severe flash drought in ~4% of years, similar to frequencies in recent decades. However, over one-third of all inferred exceptional flash droughts occurred since 1900, suggesting the 20th century was highly flash-drought prone. These results may guide future work to diagnose the roles of external, oceanic, and land-surface forcing of warm-season atmospheric circulation and hydroclimate over North America.

Flash Drought↗

Work function reduction in lanthanum hexaboride hollow cathodes operated in gas discharges

Thermal characterization of lanthanum hexaboride (LaB6) hollow cathodes has revealed lower than expected electron emitter temperatures when the cathode reaches steady state. This phenomenon is observed at discharge currents ranging from 5 to 35 A and xenon mass ow rates of 5 to 25 sccm in cathodes with three di erent ori ce diameters. Thus, the accepted value of the work function for polycrystalline LaB6, 2.66 eV, does not describe well the emission characteristics of LaB6 hollow cathodes operating with internal gas discharges at steady state. The measured temperatures and a model of the hollow cathode emitter and xenon discharge were used to estimate the value of the work function in these experiments, yielding a value ranging from 2.1 - 2.44 eV. Measurements of the work function as a function of depth on a hollow cathode emitter using X-ray photoelectron spectroscopy and ion beam milling indicate that the work function in a thin layer near the emitting surface is lower than in the bulk material. We postulate that a lanthanum-rich emitting surface with a lower work function develops as a result of lanthanum recycling in the internal plasma.

Lopez Ortega, Alejandro↗

Deciphering Extreme Mineral Records; Microstructural Phase Heritage of Shocked Materials

High-pressure minerals such as coesite, stishovite, and reidite are often used as indicators of shock metamorphism. However, high-pressure and high-temperature phases are metastable at ambient conditions and, therefore, often revert to a more energetically favorable phase. During solid-state transformations, the crystallographic orientations of the stable polymorph are controlled by the transformation pathway from the parent. Microstructural orientation analysis using electron backscatter diffraction (EBSD) of the stable phase can reveal systematic intercrystalline orientation relationships (OR) diagnostic of solid-state transformations from these high-pressure or high-temperature polymorph phases (Cayron et al., 2006). Knowledge of polymorph stability fields for a given system can thus be used to infer minimum shock P and/or T conditions that rocks have experienced, which are otherwise unavailable using traditional thermobarometers such as element partition coefficients. Using orientation relationships to infer the former presence of mineral phases has been termed microstructural “phase heritage”, and has successfully been used to probe for evidence of extreme pressures and temperatures resulting from hypervelocity impacts. The reconstruction of polymorphs of ZrSiO4 (zircon, reidite) and ZrO2 (baddeleyite) have further elucidated the behavior of these phases under hypervelocity impact conditions (Timms et al., 2017a; White et al., 2018), and OR analysis of shocked monazite has identified a previously unrecognized tetragonal high-P polymorph (Erickson et al., 2019). Zircon will convert to the low tetragonal polymorph reidite at shock stresses above ~21 GPa. However, upon decompression at temperatures above 1200 °C reidite will revert to zircon (Kusaba et al., 1985). Recrystallized zircon neoblasts encased in impact melt often show systematic misorientation relationships of 90° about <110> indicative of reversion from the reidite (Fig. 1), and preserving cryptic evidence of the high-P history that is often erased by the post shock thermal spike (Cavosie et al., 2016). Microstructural OR analysis of a dissociated zircon corona composed of baddeleyite (monoclinic-ZrO2) has identified the former presence of cubic zirconia within impact melt glass from the Mistastin Lake impact structure, Labrador, CA. Based on stability fields in the ZrO2-SiO2 binary phase diagram, cubic zirconia records thermal conditions in excess of 2370 °C at ambient P, indicating that the Mistastin impact melt is the hottest rock identified on Earth’s surface (Timms et al., 2017b). Shock-deformed monazite (monoclinic La,Ce,ThPO4) containing lamellae comprised of interlocking laths has been identified from the Haughton Dome impact structure, Nunavut, Canada and Nördlinger-Ries Crater, southern Germany. The lath-structured lamellae are composed of four systematic orientation variants, which OR analyses indicate originate from a tetragonal parent whereby the [010]monoclinic aligns with either [100] or [010]tetragonal (Erickson et al., 2019). These results highlight utility of microstructural phase heritage analyses for the identification of unstable high-P or high-T polymorphs that uniquely record the extremely transient shock conditions produced by hypervelocity impacts.

Timmons Erickson↗

Crystal Growth in the SUBSA furnace in MSG: 2002 to 2022

In 2002, the investigation “Solidification Using a Baffle In Sealed Ampoules (SUBSA)” was the first investigation to utilize the Microgravity Science Glovebox (MSG) Facility on the International Space Station (ISS). The SUBSA furnace was designed for growth of indium antimonide. It features a transparent section, which allows a side view of the melt, the solid-liquid (SL) interface and the growing crystal. In 2002, four Te-doped and three Zn-doped InSb crystals were grown in microgravity. Subsequently, the SUBSA furnace was used in several materials science investigations, including growing the radiation detector materials, InI and Cs2LiYCl6:Ce from the melt and vapor phase (2017 to 2019) and “Brazing of Aluminum alloys in Space (BRAINS)”. A review of the SUBSA furnace features and parameters will be presented, including the design of the growth ampoules, charge preparation, and the procedures used to grow InSb (in 2002) and InI (in 2019).

Aleksandar Ostrogorsky↗

Placing the East-West North American Aridity Gradient in a Multi-Century Context

Instrumental records indicate a century-long trend towards drying over western North America and wetting over eastern North America. A continuation of these trends into the future would have significant hydroclimatic and socioeconomic consequences in both the semi-arid Southwest and humid East. Using tree-ring reconstructions and hydrologic simulations of summer soil moisture, we evaluate and contextualize the modern summer aridity gradient within its natural range of variability established over the past 600 years and evaluate the effects of observed and anthropogenic precipitation, temperature, and humidity trends. The 2001–2020 positive (wet east-dry west) aridity gradient was larger than any 20-year period since 1400 CE, preceded by the most negative (wet west-dry east) aridity gradient during 1976-1995, leading to a strong multi-decade reversal in aridity gradient anomalies that was rivaled only by a similar event in the late-16th century. The 2001-2020 aridity gradient was dominated by long-term summer precipitation increases in the Midwest and Northeast, with smaller contributions from more warming in the West than the East and spring precipitation decreases in the Southwest. Multi-model mean climate simulations from CMIP6 experiments suggest anthropogenic climate trends should not have strongly affected the aridity gradient thus far. However, there is high uncertainty due to inter-model disagreement on anthropogenic precipitation trends. The recent strengthening of the observed aridity gradient, its increasing dependence on precipitation variability, and disagreement in modeled anthropogenic precipitation trends reveal significant uncertainties in how water resource availability will change across North America in the coming decades.

drought↗

Investigating Stable Oxygen and Carbon Isotopic Variability in Speleothem Records Over the Last Millennium Using Multiple Isotope-Enabled Climate Models

The incorporation of water isotopologues into the hydrology of general circulation models (GCMs) facilitates the comparison between modeled and measured proxy data in paleoclimate archives. However, the variability and drivers of measured and modeled water isotopologues, as well as the diversity of their representation in different models, are not well constrained. Improving our understanding of this variability in past and present climates will help to better constrain future climate change projections and decrease their range of uncertainty. Speleothems are a precisely datable terrestrial paleoclimate archives and provide well-preserved (semi-)continuous multivariate isotope time series in the lower latitudes and mid-latitudes and are therefore well suited to assess climate and isotope variability on decadal and longer timescales. However, the relationships of speleothem oxygen and carbon isotopes to climate variables are influenced by site-specific parameters, and their comparison to GCMs is not always straightforward. Here we compare speleothem oxygen and carbon isotopic signatures from the Speleothem Isotopes Synthesis and Analysis database version 2 (SISALv2) to the output of five different water-isotope-enabled GCMs (ECHAM5-wiso, GISS-E2-R, iCESM, iHadCM3, and isoGSM) over the last millennium (850–1850 CE). We systematically evaluate differences and commonalities between the standardized model simulation outputs. The goal is to distinguish climatic drivers of variability for modeled isotopes and compare them to those of measured isotopes. We find strong regional differences in the oxygen isotope signatures between models that can partly be attributed to differences in modeled surface temperature. At low latitudes, precipitation amount is the dominant driver for stable water isotope variability; however, at cave locations the agreement between modeled temperature variability is higher than for precipitation variability. While modeled isotopic signatures at cave locations exhibited extreme events coinciding with changes in volcanic and solar forcing, such fingerprints are not apparent in the speleothem isotopes. This may be attributed to the lower temporal resolution of speleothem records compared to the events that are to be detected. Using spectral analysis, we can show that all models underestimate decadal and longer variability compared to speleothems (albeit to varying extents). We found that no model excels in all analyzed comparisons, although some perform better than the others in either mean or variability. Therefore, we advise a multi-model approach whenever comparing proxy data to modeled data. Considering karst and cave internal processes, e.g., through isotope-enabled karst models, may alter the variability in speleothem isotopes and play an important role in determining the most appropriate model. By exploring new ways of analyzing the relationship between the oxygen and carbon isotopes, their variability, and co-variability across timescales, we provide methods that may serve as a baseline for future studies with different models using, e.g., different isotopes, different climate archives, or different time periods.

isotope-enabled simulations↗

Characterization and Calibration of an AERONET-OC Radiometer

The Ocean Color component of the global Aerosol Robotic Network (AERONET-OC) utilizes CE-318 sun photometers modified for above-water radiometry from fixed structures such as oil rigs, lighthouses and service platforms. Primarily, AERONET-OC measurements allow determination of the water-leaving radiance required for the validation of ocean color satellite data products. In this study, we characterized and calibrated one instrument from the AERONET-OC network, identified as AERONET #080. A laser-illuminated integrating sphere of known radiance enabled determination of the absolute radiance responsivity for 7 bands. We compared the results to calibrations from the AERONET facility at the Goddard Space Flight Center of the National Aeronautics and Space Administration and from the Joint Research Centre of the European Commission. These results agree within the estimated mean comparison uncertainty of 1.88 % (k = 2). We also assessed these results using calibrated lamp-illuminated integrating spheres and observed a spectral dependence to the comparison results that is unexplained.

B. C. Johnson↗

Rapid Intensification of the Emerging Southwestern North American Megadrought in 2020–2021

A previous reconstruction back to 800 ce indicated that the 2000–2018 soil moisture deficit in southwestern North America was exceeded during one megadrought in the late-1500s. Here, we show that after exceptional drought severity in 2021, ~19% of which is attributable to anthropogenic climate trends, 2000–2021 was the driest 22-yr period since at least 800. This drought will very likely persist through 2022, matching the duration of the late-1500s megadrought.

Hydrology↗

Plant Habitat 04 Citizen Outreach: The Space Chile Grow a Pepper Plant Challenge (2020-2021)

The Space Chile Grow a Pepper Plant Challenge (SCGAPPC) is a citizen outreach activity performed in conjunction with NASA technical demonstration, Plant Habitat (PH)-04 which grew a New Mexico chile pepper as the first fruit in the Advanced Plant Habitat (APH). Growing a related pepper variety from Chimayo, New Mexico, the activity tasked citizen “Space Farmers” to grow a pepper plant indoors, at home, or in controlled environments to document the details of growth, and search for solutions to growing consistently productive and flavorful peppers under these conditions. Launched in February of 2020, a scientist on the PH04 team shared an introduction on social media to provide information about the activity and instructions on how to participate. Each space farmer received an envelopecontaining seeds and a mission sticker. They conducted their own pepper growth trials to record environment and horticultural data and submit one pepper to the University of New Mexico for capsaicin analysis. This activity was available online at the onset of the COVID-19 shutdown. During 2020-2021, over 1,800 envelopes were mailed across the globe, tens of thousands of seed pouches were shared, the SCGAPPC was featured during a virtual Growing Beyond Earth Educator Workshop with the challenge of becoming a critical part of that program when students were working remotely. Citizen space farmers around the world contributed to space biology and crop production research while learning about CE agriculture. Members of the space biology community volunteered participation, skills, and interaction. An online community page provided a format for scientists, and the general publicto interact. A portion of data was documented in an online database. The primary outcome served to inform the publicabout NASA space crop production, while creating a channel to share experiences and compare results from a singlecrop growing under varying controlled environments.

Jacob Torres↗

KSC to EDEN ISS: Outredgeous Lettuce Growth on the Passive Porous Tube Nutrient Delivery System (PPTNDS)

EDEN ISS is a controlled environment greenhouse established near the Neumayer Station III in Antarcticawith the mission to enable fresh crop production for the crew who are working in this remote location. EDEN provides a space to conduct plant biology and related research in a unique and isolated controlled environment (CE), while providing a platform to test developing methods relevant to long duration manned space missions. In 2021, Kennedy Space Center (KSC) scientist Jess Bunchek fulfilled a one-year mission at EDEN. During that time a variety of fresh crops were grown to record horticultural and microbiological data as well as provide the crew with fresh food to eat. One method for crop growth included an experimental irrigation system called the Passive Porous Tube Nutrient Delivery System (PPTNDS) which was developed at KSC as a microgravity-capable plant irrigation system designed to support Space Plant Biology investigations and/or crop growth during space missions. The PPTNDS was employed to grow Outredgeous Lettuce (OL) during two growouts at EDEN, (harvesting at Day After Planting (DAP) 61 and 63) and two growouts at KSC where plant growth and micro sample data were captured. This paper presents the data collected from the PPTNDS and compares it to growth on a Nutrient Film Technique (NFT) hydroponic system operated in the same environment. The result shows a system that grows OL at a reduced rate compared to the NFT system but uses less water and crew interaction to operate.

Jacob Torres↗

Advanced Materials Development under NASA’s Hybrid Thermally Efficient Core (HyTEC) Project

The Hybrid Thermally Efficient Core (HyTEC) project aims to develop small core turbofan engine technologies that will enable fuel burn reductions, additional use of electric airplane systems through power extraction, and to advance engine operability and compatibility with sustainable aviation fuels. As such, a portfolio of technologies that contribute to raising the pressure, temperature and efficiency of turbofan engine cores needs developed. Included in HyTEC’s technology portfolio to enable these advancements are enhanced combustor liner materials and higher temperature capable turbine blades and vanes manufactured using ceramic matrix composites (CMCs) and environmental barrier coatings (EBCs). These technologies are being developed and tested in laboratory-scale relevant environments to advance the technology readiness level (TRL) to 4 or 5, before moving into an engine core demonstrator to raise the TRL to 6. A new natural gas/oxygen burner rig facility will be used to simulate turbine engine relevant environments at the laboratory/coupon scale. In addition, improvements to enable sub-element, and more complex component testing in NASA Glenn’s combustor facility (CE-5) will be presented.

Ceramic Matrix Composites (CMCs)↗

Temperature Effect on Silicate Melt-Sulfide-Metal Trace Element Partitioning in the Presence of Sulfur Under Reduced Conditions

The reduced nature of Mercury, enstatite chondrites, and the aubrite parent bodies (APB) have raised many questions regarding the geochemical behavior of typically lithophile, heat-producing, and rare-earth elements (REE) in magmas at low oxygen fugacity (fO2). Due to decreasing O availability at these low fO2, and an abundance of S(sup 2(-)), sulfur (S) acts as an important anion that changes the partitioning behavior of many elements and modifies the physical properties of silicate melts. Preliminary observations suggest that major and minor elements exhibit different geochemical affinities in highly reduced, S-rich systems compared to terrestrial rocks. The speciation and bonding environment of S, dictated by P/T/fO2 conditions, may strongly influence the degree to which S affects partitioning behavior. Here we investigate the partitioning behavior of major, minor, and trace elements between silicate melt, sulfide melt, and metal as well as the coordination chemistry of S in highly reduced silicate melts. Our work is focused on investigating solely the entropy-dependent temperature effect on partitioning of elements for which we currently have MESSENGER data (K, Na, Th, U, Si, Mg, Fe, Ti, Ca, Al, Cr, Mn, S, Cl) as well as a host of geochemically relevant trace elements such as REEs (P, Co, Ni, Mo, Ce, Nd, Sm, Eu, Gd, Dy, Yb). Previous studies in which temperature, pressure, and fO2 were co-varied found that as fO2 decreases, heat-producing elements U and Th become more chalcophile, while K becomes less chalcophile. Concurrently, nominally lithophile elements Mg and Ca become more chalcophile and were observed as minor elements in exsolved sulfides and bonded with S species in silicate melt. These studies, however, could not disentangle entropic effects from changes in the fO2. New temperature-dependent partitioning data from our work will be used to determine which elements are most likely to retain their lithophile character and hence be incorporated into silicates, and which elements are likely contained within the sulfide (chalcophile) and metal core (siderophile), setting the stage for the thermal and magmatic evolution of reduced planetary bodies.

B A Anzures↗

Trace Elemental Abundances in Calcium-Aluminum-Rich Inclusions in CV Chondrites

Introduction: Calcium-aluminum-rich inclusions (CAIs), are the first formed solids that define the age of the Solar System [1,2]. CAIs are thought to have condensed from nebular gas [3,4] within the first <1 Ma of Solar System formation [5,6]. CAIs have experienced numerous early Solar System processes including condensation, evaporation, melting, recrystallization, and aqueous alteration [e.g., 7]. The chemical, mineralogical, and textural diversity among CAIs results from a range of chemical and physical processes recorded during nebular and parent body epoch. This study aims to explore the mineralogical, textural, and chemical compositions of CAIs including the trace elemental abundances in CAI phases to determine the early Solar System processes recorded in them. Samples and Analytical Methods: We analyzed one CAI each from CV3 chondrites Northwest Africa (NWA) 5508 designated as ‘Saguaro’, and Northwest Africa (NWA) 12772 designated as ‘Hoopoe’. Back-scatter electron (BSE) images were collected using a Phenom XL scanning electron microscope (SEM) at the Lunar and Planetary Institute (LPI) and the JEOL JXA-8530F electron probe microanalyzer (EPMA) at Johnson Space Center (JSC)-NASA. Additionally, energy dispersive X-ray spectrometry (EDS) elemental maps of select areas for these samples were collected using a 15.0kV beam energy and a 40µA emission current. Using the EPMA, wavelength-dispersive X-ray spectroscopy (WDS) quantitative data were collected. In-situ trace element measurements for both CAIs were determined at JSC-NASA using a Photon Machines 193nm laser ablation system and a Thermo-Scientific Element-XR inductively coupled plasma mass spectrometer (ICP-MS). Analyses consisted of 30s ablations at 10Hz, spot sizes of 20-25µm, and a fluence of 6.0 J/cm2 for anorthite and melilite, and a 3.5 J/cm2 fluence for all other phases. NIST612 was used to correct for instrument drift, while BHVO-2g was used as a primary calibration standard. BCR-2g and in-house mineral standards were regularly measured as unknowns to ensure accuracy. Results: Saguaro is a coarse-grained CAI, ~11 x 6 mm in dimensions. Saguaro contains spinel, Al-rich pyroxene, anorthite, Mg-rich melilite, and minor perovskite in its interior and is therefore classified as a Type B CAI. Individual melilite grains shows normal compositional zoning with an Ak content ranging from ~24 to 54 with no apparent trend from the core to the edge of the CAI. The spinel appears euhedral and occurs both as clusters and as spinel palisades [8]. Two rim sequences surround most of the sample: the inner rim being a Wark-Lovering (WL) rim (~10-35 µm) containing pyroxene, spinel, and melilite (or anorthite), and the outer rim is a finer-grained, thicker (~100 µm), accretionary rim (Fig. 1). The mineral phases in Saguaro record an overall flat REE pattern with an average negative Eu anomaly in pyroxene, and an average positive Eu anomaly in anorthite and melilite respectively. Anorthite, melilite, and pyroxene have a minor depletion in Tm (Fig. 2). The Hoopoe CAI is a compact, coarse-grained ~6 × 4 mm in size. The major mineralogy includes hibonite, spinel, melilite, anorthite, and perovskite. Therefore, it is classified as a compact transitional type A and B. (?)zoning was observed in some hibonites. Individual melilite grains show both reverse and normal zoning, where the Ak content ranges from ~6- to 28. Melilite shows two distinct textures. One texture consisted of smooth melilite that appeared homogenous, while the second appeared to consist of many fine fractures. The spinel also often appears clustered. The WL-rim sequence surrounding Hoopoe is ~25 µm thick and composed of spinel, perovskite, hibonite, and melilite/anorthite. It is then partially surrounded by an outer accretionary rim (~75µm). Like before, refractory metal nuggets appeared concentrated near the WL rims. Other metal assemblages rich in Fe and Ni were also observed. All major mineral phases in Hoopoe display relatively flat REE patterns, except for varying Eu and Tm between phases (Fig. 2). There is a prominent negative Eu anomaly in perovskite and an average positive Eu anomaly in spinel, anorthite, and hibonite respectively (Fig. 2, 3). The mixed phases along the rim of the CAI also display a negative Eu anomaly, and all phases the CAI were depleted in Pb. Discussion: The CV3 CAIs analyzed in this study were classified based on their mineralogy and textures into Type A versus Type B CAIs [10]. Hibonite appears to be pseudomorphically replacing the spinel, (i.e., is hibonite in composition, but appears in the shape of spinel). Spinel palisades. The presence of spinel palisades present in Saguaro are consistent with the melting and recrystallization experienced by this CAI. Trace elemental analyses. Saguaro and Hoopoe display similar trace element patterns to each other, with both appearing generally flat, with anomalies in Eu, and Tm. Melilite and anorthite display positive Eu anomalies in both CAIs, in addition to the hibonite in Hoopoe (Fig. 2). The phases that are depleted in Eu are pyroxene and perovskite in both Saguaro and Hoopoe, respectively (Fig. 3). Given that Eu is volatile in reducing environments [11], this could possibly indicate reducing conditions at the time anorthite and melilite crystallized, with the gas they formed from containing Eu. As these CAIs continued to form, this gas as a result would become depleted in Eu. This also could be supported by the propensity of anorthite and melilite to take up Eu from its surroundings and incorporate it into their structure [12]. In addition, analyzing the assemblage of the phases in the Saguaro, melilite and anorthite (Eu enriched) often surround the pyroxene (Eu depleted) as they are crystallized. This intergrowth of phases and the proximity of the phases would support that the Eu is being incorporated into some phases, preventing it from incorporating into other. Trace elemental analyses of the CAI rims will be evaluated in more detail, as they are complicated by the transient signal being composed of a mixture of mineral phases. Broadly, however, the patterns in the rims of both CAIs are comparable to each other, and for Hoopoe, to the mixed phase patterns in the core (Fig. 3). Other studies have found that CAI rims can be depleted in Ce and Yb [13], however we did not observe these anomalies in the two CAIs discussed here. Given their similarity, the trace elemental analyses of the mixed interior (i.e. core) and rim phases could be interpreted as forming from similar, if not the same, reservoirs. The REE abundance between the rim and core of Hoopoe are also similar, indicating they may have formed from a gas of the same or similar composition. Acknowledgments: We thank the ASU Center for Meteorite Studies for loaning the samples used in this work and Tabb Prissel for his assistance with the analysis. Mouti Al-Hashimi thanks Sam Crossley and Cyrena Goodrich for their help with the LPI SEM training. This work was supported by the LPI Summer Intern Program in Planetary Science and the LPI Cooperative Agreement. References: [1] Connelly J.N. (2012) Science, 338, 651-655. [2] MacPherson G. J. (2014) Treatise on Geochem., 2, 139-179. [3] Grossman L. (1972) GCA, 36, 597-619. [4] Ebel, D.S. (2006) Meteorites and the Early Solar System II (D. S. Lauretta & H. Y. McSween, Eds.) 253-277. [5] MacPherson G. J. (2012) Earth Planet. Sci. Lett., 331-332, 43-54. [6] MacPherson G.J. (2017) GCA, 201, 65-82. [7] Krot A.N. (1995) Meteoritics & Planet. Sci., 30, 748-775. [8] Wark and Lovering (1982) GCA, 46, 2595-2607. [9] Palme H. and Jones A. (2003) Treatise on Geochemistry (H. D. Holland and K. K. Turekian Eds.), 1, 41-61. [10] Grossman L. (1980) Ann. Rev. Earth Planet. Sci., 8, 559-608. [11] Floss C. et al. (1996) GCA, 60, 1975-1997. [12] Mason B. and Martin P. M. (1974) Earth Planet. Sci. Lett., 22, 141-144. [13] Wark B. and Boynton W. V. (2001) Meteoritics & Planet. Sci., 36, 1135-1166.

X Mouti↗

CALET Search for Electromagnetic Counterparts of Gravitational Waves During the LIGO/Virgo O3 Run

The CALorimetric Electron Telescope (CALET)on the International Space Station consists of a high-energy cosmic-ray CALorimeter (CAL)and a lower-energy CALET Gamma-ray Burst Monitor (CGBM). CAL is sensitive to electrons up to 20 TeV, cosmic-ray nuclei from Z=1 throughZ∼40, and gamma rays over the range1 GeV–10 TeV. CGBM observes gamma rays from 7 keV to 20 MeV. The combined CAL-CGBM instrument has conducted a search for gamma-ray bursts (GRBs)since 2015 October. We report here on the results of a search for X-ray/gamma-ray counterparts to gravitational-wave events reported during the LIGO/Virgo observing run O3. No events have been detected that pass all acceptance criteria. We describe the components, performance, and triggering algorithms of the CGBM—the two Hard X-ray Monitors consisting of LaBr3(Ce)scintillators sensitive to 7 keV–1 MeV gamma rays and a Soft Gamma-ray Monitor BGO scintillator sensitive to 40 keV–20 MeV—and the high-energy CAL consisting of a charge detection module, imaging calorimeter, and the fully active total absorption calorimeter. The analysis procedure is described and upper limits to the time-averaged fluxes are presented.

Gamma-ray astronomy↗

Crystal Growth in the SUBSA furnace at the International Space Station (ISS)

In 2002, our investigation Solidification Using a Baffle In Sealed Ampoules (SUBSA) was the first investigation to utilize the Microgravity Science Glovebox (MSG) Facility on the International Space Station (ISS). The SUBSA furnace was designed for growth of indium antimonide. It features a transparent section, which allows a side view of the melt, the solid-liquid (SL) interface and the growing crystal. In 2002, four Te- doped and three Zn-doped InSb crystals were grown in microgravity. Subsequently, the SUBSA furnace was used in several other materials science investigations, including growing the radiation detector materials InI and Cs2LiYCl6:Ce from the melt and vapor phase (2017 to 2019) and Brazing of Aluminum alloys in Space (BRAINS). A review of the SUBSA furnace features and parameters will be presented, including the design of the growth ampoules, charge preparation, and the procedures used to grow InSb (in 2002) and InI (in 2019).

A.G. Ostrogorsk↗

Extraterrestrial Molecular Indicators of Life Investigation (EMILI)

Future missions to Enceladus, Europa, Mars, and beyond may seek the molecular signs of extraterrestrial life through chemical analysis of acquired samples. Particularly on ocean worlds such as Enceladus and Europa, samples may contain trace ocean-borne molecular biosignatures of extant life that may or may not share similarities to those of terrestrial life. In situ analyses must be prepared to detect and characterize a wide range of possible molecular species, structures, and patterns, typically with exquisite sensitivity and within a complex, poorly-characterized planetary environment. The Extraterrestrial Molecular Indicators of Life Investigation (EMILI) is designed to meet or exceed the requirements of such missions for organic molecular analysis through a powerful combination of dual chemical separation and both optical and mass spectrometry detection techniques, realized in an integrated, compact instrument package fully compatible with anticipated flight resources and conditions. The full EMILI instrument combines two sample analysis subsystems to provide wide-ranging and complementary detection of organic compounds and inorganic salts. The Gas Analysis Processing System (GAPS) uses a chemical derivatization protocol with gas chromatography (GC) separation prior to detection in an ion trap mass spectrometer (ITMS) to enable full characterization of lower-polarity, volatile and semi-volatile molecules such as fatty acids and hydrocarbons. The Organic Capillary Electrophoresis ANalysis System (OCEANS) uses a liquid-based extraction protocol with CE separation to enable precise analysis of more water-soluble/polar compounds. OCEANS features a laser-induced fluorescence detection mode to perform ultra-sensitive quantitative analysis of chiral amino acids. In EMILI, OCEANS is additionally coupled to the same ITMS through a novel electrospray ionization interface. The common ITMS allows EMILI to identify and cross-correlate molecular species and patterns, detected through either or both protocols, of molecular weights to over 1000 u, potentially even revealing complex biosignatures such as alien oligopeptides and informational polymers.

Europa↗