Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “COLD PLASMA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

RECONNECTION-DRIVEN DOUBLE LAYERS IN THE STRATIFIED PLASMA OF THE SOLAR TRANSITION REGION: SUPPLY OF HOT PLASMA INTO THE CORONA

A novel mechanism for the supply of hot plasma into the corona from the chromosphere is suggested here; the mechanism involves collisionless magnetic reconnection (CMR) in the transition region (TR) followed by double layer (DL) formation in the enhanced expansion of the chromospheric cold plasma mixed with CMR-heated hot electrons. It is well known that (i) the CMR produces energetic electrons and (ii) DLs naturally form in expanding dense plasmas containing a minor population of hot electrons. We apply these plasma physics facts to the dynamics of stratified plasma in the TR. In the TR where densities fall below ∼10{sup 16} m{sup −3}, all collisional mean-free paths, electron–ion, ion–neutral, and electron–neutral, become long enough to render plasma collisionless at kinetic scale lengths, making CMR and DL formation possible. The DLs accelerate the chromospheric cold ions to energies comparable to the energy of the hot electrons. When the upflowing energized ions neutralized by the escaping hot electrons thermalize, the resulting hot tenuous plasma supplies an energy flux ∼3 × 10{sup 5} erg cm{sup −2} s{sup −1} = 3 × 10{sup 2} J m{sup −2} s{sup −1} into the corona. The CMR–DL mechanism introduces sudden transitions in the TR as microstructures in both density and energy. The global transition in the TR could be a fractal structure containing such microscopic features. If not impossible, it is difficult to measure such microstructures, but it seems that the coronal heating begins in the nearly collisionless TR by CMR and DL formation.

79 ASTRONOMY AND ASTROPHYSICS↗

Lagrangian methods in plasma dynamics. II - Construction of Lagrangians for plasmas

Consideration of the construction of suitable Lagrangian functions for the dynamics of a cold plasma in such a way as to retain the relativistically covariant formalism. In one method, this is achieved by the introduction of a set of three variables which label the world lines of the particles. A second method results in a Clebsch-type representation. Sturrock's relativistic Lagrangian and Low's hot plasma Lagrangian are also briefly discussed in the context of the present work. The behavior of the canonical stress tensor is considered. The applicability of many of the general results in part I (Dougherty, 1970) is ensured by establishing the existence of the Lagrangian function.

Dougherty, J. P.↗

Latitudinal oscillations of plasma within the Io torus

The equilibrium latitude and the period of oscillations about this equilibrium latitude are calculated for a plasma in a centrifugally dominated tilted dipole magnetic field representing Jupiter's inner magnetosphere. It is found that for a hot plasma the equilibrium latitude in the magnetic equator, for a cold plasma it is the centrifugal equator, and for a warm plasma it is somewhere in between. An illustrative model is adopted in which atoms are sputtered from the Jupiter-facing hemisphere of Io and escape Io's gravity to be subsequently ionized some distance from Io. Finally, it is shown that ionization generally does not occur at the equilibrium altitude, and that the resulting latitudinal oscillations provide an explanation for the irregularities in electron concentration within the torus, as reported by the radioastronomy experiment aboard Voyager I.

Cummings, W. D.↗

Source of O mode radio emissions from the dayside of Uranus

During the inbound trajectory toward Uranus, the Planetary Radio Astronomy instrument on Voyager 2 observed narrow-band smooth (n-smooth) emission at frequencies centered near 60 kHz and O-mode emission (the dayside source) in a frequency range narrowly confined around 160 kHz. Assuming empirical models of the plasma density for the dayside magnetosphere of Uranus, and using cold plasma theory together with observational constraints, ray-tracing calculations are performed to determine the source location of the O-mode emission. The dayside source appears to originate along magnetic field lines with a footprint near the north magnetic pole. Sources of nightside high-frequency broadband smooth (b-smooth) emission observed by Voyager after encounter are believed to exist near the conjugate footprint of these same field lines. This would indicate that the particle population supplying the free energy source has energies at least as high as a few keV.

Menietti, J. D.↗

Spacecraft charging at synchronous orbit.

Observation that ATS 5 can charge to potentials as high as 10,000 volts during eclipse, and as high as 200 volts in sunlight. This charging has been used to infer the presence of the plasmasphere at synchronous altitude in the midnight region, and its prompt disappearance when hot plasma is injected in association with substorms. Although injected plasma has a density of 1.0 per cu cm the remaining cold plasma (less than 50 eV) has a density of 0.01 per cu cm. A mathematical model of ATS 5 has been constructed that can be used to predict spacecraft potentials. In addition, parts of ATS 5 can charge to several hundred volts without affecting the overall spacecraft potential appreciably.

Deforest, S. E.↗

Jovian sodium plasma

The nature of the sodium plasma created by ionization of the sodium emitted into the environment of Jupiter by Io is discussed. It is shown that the ions form a three-component plasma: cold, thermal, and energetic. Observational evidence for the effect of the plasma on the neutral sodium cloud is presented. The energetic component is predicted to generate ion cyclotron turbulence near the sodium gyrofrequency.

Eviatar, A.↗

Possible second harmonic gyroemission at Uranus

During the inbound trajectory toward Uranus, the Planetary Radio Astronomy Instrument on board the Voyager 2 spacecraft observed narrow-band smooth (n-smooth) emission at frequencies centered near 60 kHz. By assuming models of the plasma density for the dayside magnetosphere of Uranus and by using cold plasma theory together with stringent observational constraints, ray-tracing calculations were performed to determine the source location and mode of the n-smooth emission. Ray-tracing calculations suggest that the n-smooth emission with sources near the magnetic equator may be fundamental X mode for certain conditions or second harmonic gyroemission. If the emission is second harmonic gyroemission, the fundamental emission at 30 kHz is expected but apparently not observed. These findings are discussed in the context of the most recent developments in the theory of the cyclotron maser instability.

Menietti, J. D.↗

Adding linear kinetic effects to existing finite-difference simulations

We present the proof-of-principle KINETIC-J module for iterative addition of all-order kinetic effects (parallel and perpendicular) in both the IC and EC frequency ranges, to any existing FD or FE frequency-domain full-wave RF simulation. The module calculates the linear, kinetic plasma current, such that given f 0 (r,v) and the cold plasma solution as an initial guess at the wave electric field, iterating the KINETIC-J module and the existing code (its internal plasma current replaced with the output of the module) converges to the kinetic solution. Since KINETIC-J does not use the k-space representation of the hot plasma dielectric, in favor of data parallel numeric integrals, implementing the module requires minimal code changes.

Green, David L↗

Resonant excitation of whistler waves by a helical electron beam

Chorus-like whistler mode waves that are known to play a fundamental role in driving radiation belt dynamics are excited on the Large Plasma Device by the injection of a helical electron beam into a cold plasma. The mode structure of the excited whistler wave is identified using a phase correlation technique showing that the waves are excited through a combination of Landau resonance, cyclotron resonance, and anomalous cyclotron resonance. The dominant wave mode excited through cyclotron resonance is quasi-parallel propagating, whereas wave modes excited through Landau resonance and anomalous cyclotron resonance propagate at oblique angles that are close to the resonance cone. An analysis of the linear wave growth rates captures the major observations in the experiment. Here, the results have important implications for the generation process of whistler waves in the Earth’s inner magnetosphere.

58 GEOSCIENCES↗

Stagnation of electron flow by a nonlinearly generated whistler wave

Relativistic electron beam transport through a high-density, magnetized plasma is studied numerically and theoretically. An electron beam injected into a cold plasma excites Weibel and two-stream instabilities that heat the beam and saturate. In the absence of an applied magnetic field, the heated beam continues to propagate. However, when a magnetic field of particular strength is applied along the direction of beam propagation, a secondary instability of off-angle whistler modes is excited. These modes then couple nonlinearly creating a large amplitude parallel-propagating whistler that stops the beam. Here, we will show these phenomena in detail and explain the mechanism of whistler mediated beam stagnation.

Physics↗

Diffraction of radio frequency waves by spatially modulated interfaces in the plasma edge in tokamaks

We report the use of radio frequency (RF) waves in fusion plasmas for heating, for non-inductive current generation, for profile control and for diagnostics has been well established. The RF waves, excited by antenna structures placed near the wall of a fusion device, have to propagate through density fluctuations at the plasma edge. These fluctuations can modify the properties of the RF waves that propagate towards the core of the plasma. A full-wave electromagnetic computational code ScaRF based on the finite difference frequency domain (FDFD) method has been developed to study the effect of density turbulence on RF waves. The anisotropic plasma permittivity used in the scattering studies is that for a magnetized, cold plasma. The code is used to study the propagation of an RF plane wave through a modulated, spatially periodic density interface. Such an interface could arise in the edge region due to magnetohydrodynamic instability or drift waves. The frequency of the plane wave is taken to be in the range of the electron cyclotron frequency. The scattering analysis is applicable to ITER-like plasmas, as well as to plasmas in medium sized tokamaks such as TCV, ASDEX-U and DIII-D. The effect of different density contrasts across the interface and of different spatial modulations are discussed. While ScaRF is used to study a periodic density fluctuation, the code is general enough to include different varieties of density fluctuations in the edge region – such as blobs and filaments, and spatially random fluctuations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Diffraction of radio frequency waves by spatially modulated interfaces in the plasma edge in tokamaks

The use of radio frequency (RF) waves in fusion plasmas for heating, for non-inductive current generation, for profile control, and for diagnostics has been well established. The RF waves, excited by antenna structures placed near the wall of a fusion device, have to propagate through density fluctuations in the plasma edge. These fluctuations can modify the properties of the RF waves that propagate towards the core of the plasma. A full-wave electromagnetic computational code ScaRF based on the finite diifference frequency domain (FDFD) method has been developed to study the effect of density turbulence on RF waves. The anisotropic plasma permittivity used in the scattering studies is that for a magnetized, cold plasma. The code is used to study the propagation of an RF plane wave through a modulated, spatially periodic density interface. Such an interface could arise in the edge region due to magnetohydrodynamic instability or drift waves. The frequency of the plane wave is taken to be in the range of the electron cyclotron frequency. The scattering analysis is applicable to ITER-like plasmas, as well as to plasmas in medium sized tokamaks such as TCV, ASDEX-U, and DIII-D. The effect of diifferent density contrasts across the interface and of diifferent spatial modulations are discussed. While ScaRF is used to study a periodic density fluctuation, the code is general enough to include diifferent varieties of density fluctuations in the edge region -- such as blobs and filaments, and spatially random fluctuations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Thermophysical Properties of Cold and Vacuum Plasma Sprayed Cu-Cr-X Alloys, NiAl and NiCrAlY Coatings: Specific Heat Capacity - Part 2

Part I of the paper discussed the temperature dependencies of the electrical resistivities, thermal conductivities, thermal diffusivities and total hemispherical emissivities of several vacuum plasma sprayed (VPS) and cold sprayed copper alloy monolithic coatings, VPS NiAl, VPS NiCrAlY, extruded GRCop-84 and as-cast Cu-17(wt.%)Cr-5%Al. Part II discusses the temperature dependencies of the constant pressure specific heat capacities, CP, of these coatings. The data were empirically were regression-fitted with the equation: CP = AT4 + BT3 + CT2 + DT +E where T is the absolute temperature and A, B, C, D and E are regression constants. The temperature dependencies of the molar enthalpy, molar entropy and Gibbs molar free energy determined from experimental values of molar specific heat capacity are reported. Calculated values of CP using the Neumann-Kopp (NK) rule were in poor agreement with experimental data. Instead, a modification of the Neumann-Kopp rule was found to predict values closer to the experimental data with an absolute deviation less than 6.5%. The specific molar heat capacities for all the alloys did not agree with the Dulong-Petit law, and CP is greater than 3R, where R is the universal gas constant, were measured for all the alloys except NiAl for which CP is less than 3R at all temperatures.

Raj, S. V.↗

Net-field polarization in a magnetically biased plasma.

Systematic treatment of the net-field polarization of a plane wave propagating in a magnetically biased cold plasma. Polarization transformations under quasi-longitudinal conditions are examined. The wide variety of polarization transformations available suggests the usefulness of slabs of magnetically biased plasma to synthesize microwave polarizers and depolarizers.

Rusch, W. V. T.↗

MHD surface waves in high- and low-beta plasmas. I - Normal-mode solutions

Since the first paper by Barston (1964) on electrostatic oscillations in inhomogeneous cold plasmas, it has been commonly accepted that all finite layers with a continuous profile in pressure, density and magnetic field cannot support normal surface waves but instead the waves always decay through phase mixing (also called resonant absorption). The problem is reanalyzed by studying a compressible current sheet of a general structure with rotation of the magnetic field included. All inhomogeneous layers considered in the high-beta plasma limit do not support normal modes. However, in the limit of a low-beta plasma there are some cases when normal-mode solutions are recovered. The latter means that the process of resonant absorption is not common for all inhomogeneous layers.

Musielak, Z. E.↗

3D full wave fast wave modeling with realistic HHFW antenna geometry and SOL plasma in NSTX-U

This paper reports the significant advancement of our ability to model and to understand how RF waves interact with the SOL plasma, by developing for the full torus 3D scrape-off layer (SOL) plasma simulation together with the antenna and core plasma in the NSTX-U device in HHFW frequency regime for a cold plasma model. The present paper extends the previous modeling (Bertelli et al 2020 AIP Conf. Proc. 2254 030001) to a full 3D device geometry including realistic antenna geometry in order to capture a more realistic experimental situation including the fully 3D wave field effects and the antenna plasma interaction in the SOL plasma, and, at the same time, resulting core wave propagation. Here, the central tool of the present work is the Petra-M code, which is a newly developed state-of-the-art generic electromagnetic simulation tool for modeling RF wave propagation based on MFEM (http://mfem.org), an open source scalable C++ finite element method library.

3D RF modeling↗