Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Boundary Layer Profiles”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Experiment on turbulent boundary layers on a concave wall

The present experiment describes the behavior of a turbulent boundary layer on a concave wall. At the onset of curvature there appears a fairly coherent wavelike transverse profile of mean velocity. This disturbance might be interpreted as a kind of large scale Taylor-Goertler type instability superimposed on a conventional turbulent boundary layer; further downstream the coherence degenerates as the turbulence level increases. Boundary-layer profile measurements were made at positions of maxima and minima of transverse profiles of (U-component) mean velocity. The boundary layer at the minima positions is found to be twice as thick as that at the maxima positions. Also, turbulent intensities inside the boundary layer are substantially increased as a result of the concave curvature of the surface.

So, R. M. C.↗
NASA NTRS1979

Generalized velocities in the outer region of hypersonic turbulent boundary layers

An attempt is made to show that the outer portion of the velocity profile of hypersonic turbulent boundary layers can be transformed so that the constants determined by a best fit to the law of the wake are in reasonable agreement with the wake constant for incompressible boundary layers at the same Reynolds number. Both y transformations (where y is distance from the surface) and velocity transformations produce velocity profiles which, with the proper choice of wall shear stress to give shear velocity, can be reduced to the incompressible law of the wall.

Watson, R. D.↗
NASA NTRS1974

Effect of mean-velocity profile shapes on sound transmission through two-dimensional ducts

Acoustic propagation through a lined two-dimensional duct is examined in order to assess the influence of the shape of the mean-velocity profile on the attenuation rate. Five mean-velocity profiles are considered: linear, parabolic, Pohlhausen, 1/7th power law with a linear sub-layer, and linear with slip at the wall. It is shown that when the attenuation rate is tabulated as a function of the boundary-layer thickness, as is usually done, substantially different results are obtained from the several mean profiles. However, when the displacement thickness is used, a considerable collapse is achieved in the attenuation curves that are obtained from the various profiles. For downstream propagation, all profiles produce essentially the same results over a reasonable range of boundary-layer thickness. However, for many cases of upstream propagation, the results from the 'turbulent' boundary-layer profiles differ significantly from the results of the other profiles even when compared on the basis of displacement thickness.

Hayfeh, A. H.↗
NASA NTRS1992

Application of algebraic-RNG eddy viscosity model to simulation of transitional boundary layer flow

An algebraic eddy-viscosity model is derived from the renormalization group (RNG) theory of turbulence. A new length scale, based on boundary layer characteristics (displacement thickness, shape factor), is proposed. The model was applied to transitional boundary layer flow over a flat plate. Integral characteristics, such as the total skin friction coefficient, and mean velocity profile across the boundary layer, are found to be in good agreement with experimental data.

Yakhot, Alexander↗
NASA NTRS2021

Hypersonic Boundary-Layer Instabilities over Ogive-Cylinder Models

Computational investigations of an ogive-cylinder geometry with varying nosetips at zero degrees angle of attack are presented. The model geometry and conditions are selected to match experiments conducted in the Air Force Research Laboratory (AFRL) Mach 6 Ludwieg Tube. Five nosetips of interest were selected for the computational studies herein: two sharp ogives, two blunt ogives, and one hemispherical nosetip. Computations are performed at a freestream Reynolds number of 7.01 × 10 6 m -1 . Each sharp and blunt tip ogives had a 14 and 28 degree version for the tip angles. A cylindrical section follows the nosetip, resulting in a meter long model such as in the experiments. The laminar flow solutions are analyzed. The boundary-layer-edge properties and the velocity and temperature profiles are compared across streamwise locations aft of the ogive-cylinder junction. The blunt nosetips induce an entropy layer that envelopes the boundary-layer profiles. Modal stability analysis identifies most amplified frequencies corresponding to Mack’s second modes that agree with experimental results for the sharp tips. Similar to the experimental measurements based on wall-mounted pressure sensors, no unstable modes are found for the blunt models. Nonmodal analysis revealed a broadband set of disturbances present for the blunter tips, in agreement with experimental observations. Flow perturbation contours of most amplified planar and oblique disturbances are shown to qualitatively match wind tunnel Schlieren images, with a switch from rope-like to elongated structures, i.e., from high frequency Mack’s second modes to low frequency Mack’s first modes, as the nosetip angle is increased for the sharp tip, and from boundary-layer to entropy-layer disturbances as the bluntness is increased.

Boundary layer transition↗
NASA NTRS2022

Hypersonic Boundary-Layer Instabilities over Ogive-Cylinder Models

Computational investigations of an ogive-cylinder geometry with varying nosetips at zero degrees angle of attack are presented. The model geometry and conditions are selected to match experiments conducted in the Air Force Research Laboratory (AFRL) Mach 6 Ludwieg Tube. Five nosetips of interest were selected for the computational studies herein: two sharp ogives, two blunt ogives, and one hemispherical nosetip. Computations are performed at a freestream Reynolds number of 7.01 × 10 6 m -1 . Each sharp and blunt tip ogives had a 14 and 28 degree version for the tip angles. A cylindrical section follows the nosetip, resulting in a meter long model such as in the experiments. The laminar flow solutions are analyzed. The boundary-layer-edge properties and the velocity and temperature profiles are compared across streamwise locations aft of the ogive-cylinder junction. The blunt nosetips induce an entropy layer that envelopes the boundary-layer profiles. Modal stability analysis identifies most amplified frequencies corresponding to Mack’s second modes that agree with experimental results for the sharp tips. Similar to the experimental measurements based on wall-mounted pressure sensors, no unstable modes are found for the blunt models. Nonmodal analysis revealed a broadband set of disturbances present for the blunter tips, in agreement with experimental observations. Flow perturbation contours of most amplified planar and oblique disturbances are shown to qualitatively match wind tunnel Schlieren images, with a switch from rope-like to elongated structures, i.e., from high frequency Mack’s second modes to low frequency Mack’s first modes, as the nosetip angle is increased for the sharp tip, and from boundary-layer to entropy-layer disturbances as the bluntness is increased.

Boundary layer transition↗
NASA NTRS1976

Similarity theory of the buoyantly interactive planetary boundary layer with entrainment

A similarity model is developed for the vertical profiles of turbulent flow variables in an entraining turbulent boundary layer of arbitrary buoyant stability. In the general formulation the vertical profiles, internal rotation of the velocity vector, discontinuities or jumps at a capping inversion and bulk aerodynamic coefficients of the boundary layer are given by solutions to a system of ordinary differential equations in the similarity variable. To close the system, a formulation for buoyantly interactive eddy diffusivity in the boundary layer is introduced which recovers Monin-Obukhov similarity near the surface and incorporates a hypothesis accounting for the observed variation of mixing length throughout the boundary layer. The model is tested in simplified versions which depend only on roughness, surface buoyancy, and Coriolis effects by comparison with planetary-boundary-layer wind- and temperature-profile observations, measurements of flat-plate boundary layers in a thermally stratified wind tunnel and observations of profiles of terms in the turbulent kinetic-energy budget of convective planetary boundary layers. On balance, the simplified model reproduced the trend of these various observations and experiments reasonably well, suggesting that the full similarity formulation be pursued further.

Hoffert, M. I.↗
NASA NTRSDate not supplied

TPSAS-NF1676L-31185-DND

Accurate predictive modeling of EPA-defined criteria pollutants in transition zones such as the land/water interface has proven challenging due to differing emission sources, meteorology, and environmental conditions (e.g. temperature, humidity). Chemical species that are “trapped" over water may contribute to exceedence events over land due to land/sea breeze events. The Ozone Water-Land Environmental Transition Study (OWLETS) during the 2017 summer was initiated to study how ozone and ozone precursor concentrations differ over two proximate sites (separated by 20 km). One site (NASA's Langley Research Center) is a land-based site, with the second site being located on the third island of the Chesapeake Bay Bridge Tunnel, approximately 14 km offshore. Both sites had ozone lidars from the Tropospheric Ozone Lidar NETwork(TOLNET) for continuous profiling of the boundary layer and lower-tropospheric ozone and sounding capabilities for profiling the atmosphere up to 35 km. Coincident sonde launches were conducted from both sites to allow intercomparison of ozone mixing ratios and temperature/humidity. Preliminary results regarding ozone gradients are presented herein.

E Gargulinski↗
NASA NTRS1983

Flow measurements of an airfoil with deflected spoiler

Spoilers are used as an effective control surface in various stages of flight. The steady and unsteady flow characteristics change with incidence and spoiler angle. An experimental investigation is undertaken to understand the flow phenomena. Typical boundary layer and wake profiles at various incidences and spoiler angles are presented and discussed. A laminar separation is observed at low incidence and high spoiler angle. At incidence, a turbulent boundary layer develops and separation point moves downstream. Generally the wake profiles are asymmetric. When different length scales are used, the profiles become self-similar and symmetric. The importance of laser velocimetry in the reverse flow region is demonstrated by comparing the preliminary LDV measurements with the hot-wire results.

Lee, C. S.↗
NASA NTRS1951

A general integral form of the boundary-layer equation for incompressible flow with an application to the calculation of the separation point of turbulent boundary layers

A general integral form of the boundary-layer equation, valid for either laminar or turbulent incompressible boundary-layer flow, is derived. By using the experimental finding that all velocity profiles of the turbulent boundary layer form essentially a single-parameter family, the general equation is changed to an equation for the space rate of change of the velocity-profile shape parameter. The lack of precise knowledge concerning the surface shear and the distribution of the shearing stress across turbulent boundary layers prevented the attainment of a reliable method for calculating the behavior of turbulent boundary layers.

Tetervin, Neal↗
NASA NTRS1983

Experimental investigation of a two-dimensional shock-turbulent boundary layer interaction with bleed

The two-dimensional interaction of an oblique shock wave with a turbulent boundary layer that included the effect of bleed was examined experimentally using a shock generator mounted across a supersonic wind tunnel The studies were performed at Mach numbers 2.5 and 2.0 and unit Reynolds number of approximately 2.0 x 10 to the 7th/meter. The study includes surface oil flow visualization, wall static pressure distributions and boundary layer pitot pressure profiles. In addition, the variation of the local bleed rates were measured. The results show the effect of the bleed on the boundary layer as well as the effect of the flow conditions on the local bleed rate.

Hingst, W. R.↗
NASA NTRS1983

Experimental investigation of a two-dimensional shock-turbulent boundary layer interaction with bleed

The two-dimensional interaction of an oblique shock wave with a turbulent boundary layer that included the effect of bleed was examined experimentally using a shock generator mounted across a supersonic wind tunnel. The studies were performed at Mach numbers 2.5 and 2.0 and unit Reynolds number of approximately 2.0 x 10 to the 7th/meter. The study includes surface oil flow visualization, wall static pressure distributions and boundary layer pitot pressure profiles. In addition, the variation of the local bleed rates were measured. The results show the effect of the bleed on the boundary layer as well as the effect of the flow conditions on the local bleed rate.

Hingst, W. R.↗
NASA NTRS1987

Measurements of the turbulent transport of heat and momentum in convexly curved boundary layers - Effects of curvature, recovery and free-stream turbulence

The effects of streamwise convex curvature, recovery, and freestream turbulence intensity on the turbulent transport of heat and momentum in a mature boundary layer are studied using a specially designed three-wire hot-wire probe. Increased freestream turbulence is found to increase the profiles throughout the boundary layer on the flat developing wall. Curvature effects were found to dominate turbulence intensity effects for the present cases considered. For the higher TI (turbulence intensity) case, negative values of the turbulent Prandtl number are found in the outer half of the boundary layer, indicating a breakdown in Reynolds analogy.

Kim, J.↗
NASA NTRS1987

Control of turbulence through a row of Helmholtz resonators

The manipulation of turbulent boundary layers is useful in a variety of situations including drag reduction and separation delay. In this study a passive method of altering the turbulence in a boundary layer is investigated. Ten Helmholtz resonators were imbedded in a spanwise row under a turbulent boundary layer. At certain airspeeds the resonators were strongly excited by the turbulence. In turn, the resonator motions interact to modify the turbulence and mean velocity profiles in the boundary layer. Tests were conducted to measure the response of the resonators as a function of freestream speed. Additional tests, conducted at the conditions for maximum response, documented the affect on the mean and turbulent velocity profiles.

Panton, Ronald L.↗
NASA NTRS2012

Hypersonic Boundary Layer Measurements with Variable Blowing Rates Using Molecular Tagging Velocimetry

Measurements of mean and instantaneous streamwise velocity profiles in a hypersonic boundary layer with variable rates of mass injection (blowing) of nitrogen dioxide (NO2) were obtained over a 10-degree half-angle wedge model. The NO2 was seeded into the flow from a slot located 29.4 mm downstream of the sharp leading edge. The top surface of the wedge was oriented at a 20 degree angle in the Mach 10 flow, yielding an edge Mach number of approximately 4.2. The streamwise velocity profiles and streamwise fluctuating velocity component profiles were obtained using a three-laser NO2->NO photolysis molecular tagging velocimetry method. Observed trends in the mean streamwise velocity profiles and profiles of the fluctuating component of streamwise velocity as functions of the blowing rate are described. An effort is made to distinguish between the effect of blowing rate and wall temperature on the measured profiles. An analysis of the mean velocity profiles for a constant blowing rate is presented to determine the uncertainty in the measurement for different probe laser delay settings. Measurements of streamwise velocity were made to within approximately 120 gm of the model surface. The streamwise spatial resolution in this experiment ranged from 0.6 mm to 2.6 mm. An improvement in the spatial precision of the measurement technique has been made, with spatial uncertainties reduced by about a factor of 2 compared to previous measurements. For the quiescent flow calibration measurements presented, uncertainties as low as 2 m/s are obtained at 95% confidence for long delay times (25 gs). For the velocity measurements obtained with the wind tunnel operating, average single-shot uncertainties of less than 44 m/s are obtained at 95% confidence with a probe laser delay setting of 1 gs. The measurements were performed in the 31-inch Mach 10 Air Tunnel at the NASA Langley Research Center.

Bathel, Brett F.↗
NASA NTRS1983

Studies of sidewall boundary layer in the Langley 0.3 meter transonic cryogenic tunnel with and without suction

Boundary layer measurements on the sidewalls of the Langley 0.3 Meter Transonic Cryogenic Tunnel were made to determine the effectiveness of the passive boundary layer bleed system over a Reynolds number range from 20 to 200 x 10 to the sixth power per meter at Mach numbers from 0.30 to 0.76. The tunnel sidewall boundary layer displacement thickness was about 2 percent of the width of the test section without the boundary layer bleed. Measured velocity profiles correlated well with the defect law of Hama. With the boundary layer bleed equivalent to about 2 percent of the test section mass flow, the boundary layer displacement thickness reduced to about 1 percent of the test section width, which is generally considered acceptable for testing airfoils. It was also noticed that effectiveness of the bleed was nearly independent of the Mach number and Reynolds number over the range of conditions tested. A comparison of the measured suction effectiveness of the bleed with the finite difference and integral methods of boundary layer calculation showed good agreement.

Murthy, A. V.↗
NASA NTRS1982

Dynamics of an unsteady turbulent boundary layer

The present investigation is concerned with the response of a well-defined, steady, flatplate turbulent boundary layer subjected subsequently to two types of oscillations of the free-stream velocity in the test section. It is found that the mean velocity profile in the boundary layer is unaffected by imposed free-stream oscillations in the range of frequencies employed. It is the same as the one measured with a free-stream velocity distribution held steady at its mean value. The behavior of the mean velocity field is a consequence of two observations. The time-averaged Reynolds stress distribution across the boundry layer is unaffected by the imposed oscillations. The Reynolds stresses arising from the organized velocity fluctuations under imposed oscillatory conditions are negligible compared to Reynolds stress due to the random fluctuations.

Parikh, P. G.↗