Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Biodiesel”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Nanoparticle Technology for Biorefinery of Non-Food Source Feedstocks

The goal of this proposed work is to develop and optimize the synthesis of mesoporous nanoparticle materials that are able to selectively sequester fatty acids from hexane extracts from algae, and to catalyze their transformation, as well as waste oils, into biodiesel. The project involves studies of the interactions between the functionalized MSN surface and the sequestering molecules. We investigate the mechanisms of selective extraction of fatty acids and conversion of triglycerides and fatty acids into biodiesel by the produced nanoparticles. This knowledge is used to further improve the properties of the mesoporous nanoparticle materials for both tasks. Furthermore, we investigate the strategies for scaling the synthesis of the catalytic nanomaterials up from the current pilot plant scale to industrial level, such that the biodiesel obtained with this technology can successfully compete with food crop-based biodiesel and petroleum diesel.

09 BIOMASS FUELS↗

Evaluation of fuel-borne sodium effects on a DOC-DPF-SCR heavy-duty engine emission control system: Simulation of full-useful life

Here we report that for renewable fuels to displace petroleum, they must be compatible with emissions control devices. Pure biodiesel contains up to 5 ppm Na + K and 5 ppm Ca + Mg metals, which have the potential to degrade diesel emissions control systems. This study aims to address these concerns, identify deactivation mechanisms, and determine if a lower limit is needed. Accelerated aging of a production exhaust system was conducted on an engine test stand over 1001 h using 20% biodiesel blended into ultra-low sulfur diesel (B20) doped with 14 ppm Na. This Na level is equivalent to exposure to Na at the uppermost expected B100 value in a B20 blend for the system full-useful life. During the study, NOx emissions exceeded the engine certification limit of 0.33 g/bhp-hr before the 435,000-mile requirement. Replacing aged diesel oxidation catalyst (DOC), diesel particulate filter (DPF), and selective catalytic reduction (SCR) devices with new degreened parts showed that each device contributed equally to the NOx increase. Following this systems-based evaluation, a detailed investigation of the individual components was completed. Na was determined to have minimal impact on DOC activity. For this system, it is estimated that B20-Na resulted in 50% more ash into the DPF. However, the Na did not diffuse into the cordierite DPF nor degrade its mechanical properties. The SCR degradation was found to be caused by a small amount of precious group metals (PGM) contamination that increased NH3 oxidation, and lowered NOx reduction. Therefore, we determined that the primary effect of Na in this study is through increased ash in the DPF rather than deactivation of the catalytic activity.

42 ENGINEERING↗

Process design and economics for production of advanced biofuels from genetically modified lipid-producing sorghum

This study evaluates the potential for making advanced biofuels from genetically modified (GM) lipid–producing sorghum. A biodiesel coproduction process is developed to extract, purify, and upgrade lipids to diesel fuel while carbohydrates are utilized for making ethanol through acid thermal pretreatment, enzymatic hydrolysis, and fermentation. To assess the advantages of coproducing biodiesel from GM–sorghum, process economics are compared to a cellulosic ethanol biorefinery receiving non-GM sorghum. Minimum ethanol selling prices (MESP) that reach a breakeven point after 30 years of service life are calculated as an economic index to compare the two processes. Results indicate that biodiesel coproduction improves the economics by lowering the MESP from 3.08/gal for the ethanol-only process to 2.46/gal. Sensitivity analyses reveal that increasing sorghum’s lipid content, increasing the lipid extraction efficiency, and reducing the solvent-to-solids ratio in lipid extraction columns are the most important process parameters to further enhance technoeconomics. Analyses indicate that a lipid content above 13 wt% (dry basis) or a biomass price less than 65/Mg (dry basis) will result in a 2014 ethanol wholesale price of 2.25/gal for the coproduction process.

09 BIOMASS FUELS↗

Transesterification of waste vegetable oil under pulse sonication using ethanol, methanol and ethanol–methanol mixtures

Highlights: • Pulse sonication effect on transesterification of waste vegetable oil was studied. • Effects of ethanol, methanol, and alcohol mixtures on FAMEs yield were evaluated. • Effect of ultrasonic intensity, power density, and its output rates were evaluated. • Alcohol mixtures resulted in higher biodiesel yields due to better solubility. - Abstract: This study reports on the effects of direct pulse sonication and the type of alcohol (methanol and ethanol) on the transesterification reaction of waste vegetable oil without any external heating or mechanical mixing. Biodiesel yields and optimum process conditions for the transesterification reaction involving ethanol, methanol, and ethanol–methanol mixtures were evaluated. The effects of ultrasonic power densities (by varying sample volumes), power output rates (in W), and ultrasonic intensities (by varying the reactor size) were studied for transesterification reaction with ethanol, methanol and ethanol–methanol (50%-50%) mixtures. The optimum process conditions for ethanol or methanol based transesterification reaction of waste vegetable oil were determined as: 9:1 alcohol to oil ratio, 1% wt. catalyst amount, 1–2 min reaction time at a power output rate between 75 and 150 W. It was shown that the transesterification reactions using ethanol–methanol mixtures resulted in biodiesel yields as high as >99% at lower power density and ultrasound intensity when compared to ethanol or methanol based transesterification reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A spent coffee grounds based biorefinery for the production of biofuels, biopolymers, antioxidants and biocomposites

Highlights: • Spent coffee grounds is used as a resource for the preparation of biofuels and value added products. • In-situ transesterification of spent coffee grounds show high biodiesel yield. • Biopolymer, biosorbent, antioxidant, and biocomposite are obtained from spent coffee grounds. • A biorefinery based on spent coffee grounds will positively impact the biobased economy. • Circular economy concept can be applied to spent coffee grounds valorisation. - Abstract: Spent coffee grounds are composed of lipid, carbohydrates, carbonaceous, and nitrogen containing compounds among others. Using n-hexane and n-hexane/isopropanol mixture highest oil yield was achived during soxhlet extraction of oil from spent coffee grounds. Alternatively, supercritical carbon dioxide can be employed as a green solvent for the extraction of oil. Using advanced chemical and biotechnological methods, spent coffee grounds are converted to various biofuels such as, biodiesel, renewable diesel, bioethanol, bioethers, bio-oil, biochar, and biogas. The in-situ transesterification of spent coffee grounds was carried out in a large scale (4 kg), which led to 80–83% biodiesel yield. In addition, a large number of value added and diversified products viz. polyhydroxyalkanoates, biosorbent, activated carbon, polyol, polyurethane foam, carotenoid, phenolic antioxidants, and green composite are obtained from spent coffee grounds. The principles of circular economy are applied to develop a sustanaible biorefinery based on valorisation of spent coffee grounds.

09 BIOMASS FUELS↗

Peatland Loss in Southeast Asia Contributing to U.S. Biofuel’s Greenhouse Gas Emissions

Land use change (LUC) induced by biofuel production could lead to greenhouse gas (GHG) emissions, which potentially increase biofuel’s carbon intensity. Among the sources of LUC-related emissions for soy biodiesel, the contribution from peatland loss to agricultural plantations in Southeast Asia remains uncertain. Here, in this study, we analyzed LUC in Malaysia and Indonesia and modeled its impacts on the GHG emissions of soy biodiesel produced in the United States. It shows that oil palm plantations have more than doubled over 2001–2016 and the area of palm-on-peatlands (PoP) has expanded 3.7 times. Over new palm plantations, the share of PoP is about 19% regardless of time and location and the emission factor (EF) for peatland-to-palm conversion is estimated to be 41.5 Mg CO 2 ha –1 yr –1 . With these updates on PoP and EF, the contribution of peatland loss (0.7–5.1 g CO 2 e MJ –1 ) to biodiesel emissions is only 40–65% of previous estimates, which reduces discrepancies among model simulations used by different agencies. Based on emerging evidence on LUC and related carbon changes, our analysis reexamines regional peatland loss and its impacts on LUC emissions modeling and provides new insights into the estimation of LUC impacts on biofuels’ carbon intensity.

54 ENVIRONMENTAL SCIENCES↗

Bond Dissociation Energies of C 10 and C 18 Methyl Esters from Local Multireference Averaged-Coupled Pair Functional Theory

We previously developed a fast, local, reduced scaling Cholesky-decomposed multireference averaged-coupled pair functional (CD-LMRACPF2) method, which takes advantage of the locality of dynamic correlation and numerical approximations such as Cholesky decomposition and integral screening. Motivated by the desire to study large biodiesel methyl ester molecules, here we validate CD-LMRACPF2 for the computation of bond dissociation energies (BDEs) in a suite of oxygenated molecules, and show that the low-cost method is very accurate compared to the conventional variant. We then demonstrate the power of CD-LMRACPF2 for fast and accurate computation of energies of molecules containing up to 13 second-row atoms within a polarized triple-ζ (cc-pVTZ) basis set. We use biodiesel methyl esters as a chemically interesting model system and furnish BDEs of C 10 and C 18 methyl esters, with the latter performed within a cc-pVDZ basis set. Here, we describe trends in the BDEs and explain how structural (isomeric) differences affect BDEs, as well as discuss implications of BDE trends for biodiesel physical and chemical properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Utilization of microalgae for agricultural runoff remediation and sustainable biofuel production through an integrated biorefinery approach

Generally wastewater such agricultural runoff is considered a nuisance; however, it could be harnessed as a potential source of nutrients like nitrates and phosphates in integrated biorefinery context. In the current study, microalgae Chlorella sp. S5 was used for bioremediation of agricultural runoff and the leftover algal biomass was used as a potential source for production of biofuels in an integrated biorefinery context. The microalgae Chlorella sp. S5 was cultivated on Blue Green (BG 11) medium and a comprehensive optimization of different parameters including phosphates, nitrates, and pH was carried out to acquire maximum algal biomass enriched with high lipids content. Dry biomass was quantified using the solvent extraction technique, while the identification of nitrates and phosphates in agricultural runoff was carried out using commercial kits. The algal extracted lipids (oils) were employed in enzymatic trans-esterification for biodiesel production using whole-cell biomass of Bacillus subtilis Q4 MZ841642. The resultant fatty acid methyl esters (FAMEs) were analyzed using Fourier transform infrared (FTIR) spectroscopy and gas chromatography coupled with mass spectrometry (GC–MS). Subsequently, both the intact algal biomass and its lipid-depleted algal biomass were used for biogas production within a batch anaerobic digestion setup. Interestingly, Chlorella sp. S5 demonstrated a substantial reduction of 95% in nitrate and 91% in phosphate from agricultural runoff. The biodiesel derived from algal biomass exhibited a noteworthy total FAME content of 98.2%, meeting the quality standards set by American Society for Testing and Materials (ASTM) and European union (EU) standards. Furthermore, the biomethane yields obtained from whole biomass and lipid-depleted biomass were 330.34 NmL/g VS added and 364.34 NmL/g VS added , respectively. In conclusion, the findings underscore the potent utility of Chlorella sp. S5 as a multi-faceted resource, proficiently employed in a sequential cascade for treating agricultural runoff, producing biodiesel, and generating biogas within the integrated biorefinery concept.

09 BIOMASS FUELS↗

Crude Glycerol as Cost-Effective Fuel for Combined Heat and Power to Replace Fossil Fuels (Final Technical Report)

The primary objectives of this work can be summed into two major categories. Firstly, the fundamentals of the combustion of glycerol (in both a refined and unrefined form) were to be investigated, with emphasis of the development of a system capable of reliably and repeatedly combusting glycerol as well as an analysis of the emissions produced during glycerol combustion. Focus was placed on quantifying common emissions in comparison to more traditional fuels and this work showed that the burner developed was able to completely combust glycerol within a relatively wide range of operating conditions. Additionally, focus was placed on examining specific emissions in more detail, namely interesting NOx emissions observed in initial trials, acrolein and other volatile organic emissions, and particulate and ash emissions. This work showed that the combustion of crude glycerol could result in significantly reduced NOx emissions as a function of the high fuel bound oxygen content within the glycerol fuel. It also showed that when burned properly, the combustion of crude glycerol did not result in excessive emissions of acrolein or any other VOC compared to the combustion from more traditional fuels. Lastly however, this work has shown that in any practical application in which glycerol is being burned, it will be necessary to explore ash mitigation techniques due to the very high particulate matter concentrations produced during glycerol combustion. These emissions are comparable to unfiltered coal combustion and are directly tied to the biodiesel production method. The second focus of this work was directed to developing a commercialization strategy for the use of glycerol as a fuel replacement. This strategy has identified a 30 month plan for the scaling up of the laboratory scale burner into a pre-pilot scale system. Additionally, financing options were explored and an assessment was made of the economics of replacing a traditional fuel (namely natural gas) with crude glycerol from biodiesel production. This analysis showed that the cost of replacing natural gas with crude glycerol requires a strong function of the market price per unit of energy for the traditional fuel. However, the economics can be improved through the inclusion of a federal tax credit for the use of a renewable fuel. The conclusion of this analysis also shows that the ideal customer for energy replacement via crude glycerol is biodiesel producers who are located in remote regions, where the cost of energy is higher and the cost of crude glycerol is lowest. Lastly, the commercialization strategy analyzed competing technologies, namely traditional natural gas and electric heaters, as well as competing glycerol burners, and concludes with a discussion of the requirements for a pilot demonstration.

09 BIOMASS FUELS↗

Assessing the efficiency implications of renewable fuel policy design in the United States

Abstract Obligated parties have chosen to comply with the Renewable Fuel Standard (RFS) by increasing the blending of biomass‐based biodiesel beyond originally targeted levels rather than increasing blending/consumption of ethanol to targeted levels that would have required pricing higher blends of ethanol (E85) at or below an energy‐equivalent level to E10. This paper develops a welfare‐economic framework to analyze the extent to which the nested design and the accompanying cellulosic waiver credit and biodiesel tax credit contributed to a compliance strategy by blenders that favored blending of biodiesel instead of inducing consumption of E85, and its implications for social welfare.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

ZnO/La 2 O 2 CO 3 layered composite: A new heterogeneous catalyst for the efficient ultra-fast microwave biofuel production

The search for solid state materials with high catalytic activities and with no leaching into the reaction medium is one of the key steps toward reducing the cost of producing biodiesel. We report a high biodiesel yield (>95%) in less than 5 min under mild reaction conditions (<100°C) on a ZnO/La₂O₂CO₃ heterogeneous catalyst, showing no catalyst leaching into the reaction medium. The ZnO/La₂O₂CO₃ catalyst is prepared by a co-precipitation method and characterized by X-ray diffraction (XRD), thermogravimetric analyses (TGA), transmission electron microscopy (SEM), and transmission electron microscopy (TEM). The fatty acid methyl ester (FAME) yields as function of different amounts of catalyst was also investigated. Less than 1.0 wt.% catalyst can be used in the reaction to get higher than a 95% FAME yield under mild reaction conditions. The catalytic performance is maintained after storing the catalyst in Ar for a month and no catalyst leaching into the products was found based on XRF analysis. The catalyst has a higher reaction rate than the homogeneous KOH catalyst with the assistance of microwave irradiation. All of these results promote the industrial application of the synthesized ZnO/La₂O₂CO₃ as an ideal catalyst for fast biodiesel production, avoiding many of the issues found in both commercial and independently published catalysts.

09 BIOMASS FUELS↗

Ethanolysis of camelina oil under supercritical condition with hexane as a co-solvent

Non-catalytic transesterification of camelina sativa oil under supercritical ethanol (SCE) conditions with hexane as a co-solvent was investigated to study the fatty acid ethyl ester (FAEE) yields. This process enables simultaneous transesterification of triglycerides and ethyl esterification of fatty acids in a shorter reaction of time and may reduce the energy consumption due to simplified separation and purification steps. It was found that the co-solvent plays a vital role in reducing the severity of critical operational parameters and maximizes the biodiesel yield. The important variables affecting the ethyl ester yield during the transesterification reaction are the molar ratio of alcohol/oil, reaction time, reaction temperature and co-solvent to oil ratio. Camelina biodiesel samples were analyzed using FT-IR, GC-MS and hermogravimetric analysis (TGA) methods. The fuel properties of camelina biodiesel produced were compared with those of the regular diesel and found to be conforming to the American Society for Testing and Materials (ASTMs) standards.

09 BIOMASS FUELS↗

Variability in structural carbohydrates, lipid composition, and cellulosic sugar production from industrial hemp varieties

The aim of this study was to determine carbohydrate recovery from hemp for ethanol production and quantify biodiesel from TAG (Triacylglycerol) present in hemp. The structural composition of five different hemp varieties (Seward County-SC, York County-YC, Loup County-LC, 19 m96136-19 m, and CBD Hemp-CBD) were analyzed. Concentration of glucan and xylan ranged between 32.63 to 44.52% and 10.62 to 15.48% respectively. The biomass was then pretreated with Liquid hot water followed by disk milling and then hydrolyzed enzymatically to yield monomeric sugars. High glucose (63-85%) and xylose (73-88%) recovery was achieved. Lipids were extracted from hemp using hexane and isopropanol and then transesterified to produce biodiesel. Approximately, 50% of total fatty acids in SC, LC, and CBD hemp were linoleic acid. Palmitic acid was present between 32 to 50% in varieties YC and 19 m. Highest TAG concentration at 25% of total lipids was observed in CBD hemp. In conclusion, the analysis on lipid composition and high sugar recovery demonstrates hemp as a potential bioenergy crop for ethanol and biodiesel coproduction.

09 BIOMASS FUELS↗

Effects of system design and Co-product treatment strategies on the life cycle performance of biofuels from microalgae

This study presents a life cycle greenhouse gas and energy assessment for two algal biofuel production pathways: biodiesel produced through lipid extraction (LE) and renewable diesel produced through hydrothermal liquefaction (HTL). The two production pathways generate different co-products, which are handled through allocation in life cycle assessment-based analyses. The method and assumptions used for co-product allocation affect the performance of the analyzed fuels, and are thus examined through scenario analysis; five co-product allocation strategies are tested for the LE pathway and six are tested for the HTL pathway. After allocation, the carbon intensity of renewable diesel varies from 36 to 54 gCO 2 e/MJ, and the primary energy consumption of renewable diesel varies from 0.7 to 1.2 MJ/MJ; while the carbon intensity of biodiesel ranges, remarkably, from -59 to 125 gCO 2 e/MJ, and the primary energy consumption of biodiesel ranges from 0.1 to 1.7 MJ/MJ. The optimal algal oil production pathway is determined by comparing open-loop and closed-loop systems, considering not only the estimated net environmental impacts, but also the confidence or uncertainty of those outcomes.

09 BIOMASS FUELS↗

Evaluating the sustainability of the 2017 US biofuel industry with an integrated techno-economic analysis and life cycle assessment

The United States produced more than 66.2 billion Liters of biofuel, primarily in the form of corn ethanol (61 billion Liters) and soybean biodiesel (6 billion Liters), for the transportation industry in 2017. No work currently exists that evaluates both the economic and environmental outcomes of this industry with adequate geospatial resolution and national scope. In this study, a model framework is constructed to perform Techno-Economic Analysis and Life Cycle Assessment using high-resolution input datasets to provide a granular estimation of corn ethanol and soybean biodiesel sustainability performance in most counties in the United States in 2017 (the most recent year for which data is available). Results show a total life cycle, greenhouse gas emission volume of 99.5 million Mg CO 2-eq produced in 2017 by these two biofuels (94.8 million Mg from corn ethanol, and 4.7 million Mg from soybean biodiesel), excluding indirect land use change emissions. Further, this volume corresponds to a combined carbon intensity of 65.3 gCO 2-eq /MJ, which is a greenhouse gas improvement compared to petroleum-based gasoline (the carbon intensity of conventional gasoline is 93.0 gCO 2-eq /MJ). However, these biofuels are produced at an additional economic cost ($1.8 billion over the displaced gas/diesel). Additionally, these biofuels generate unfavorable impacts in other environmental categories when compared to petroleum-based fuels, particularly in areas of water, land, and nitrogen intensity. This work enables stakeholders to assess the specific value of biofuels as a means of emission reduction and determine if the attained improvements are worth the associated opportunity costs.

09 BIOMASS FUELS↗

Data for Variability in Structural Carbohydrates, Lipid Composition, and Cellulosic Sugar Production from Industrial Hemp Varieties

The aim of this study was to determine carbohydrate recovery from hemp for ethanol production and quantify biodiesel from TAG (triacylglycerol) present in hemp. The structural composition of five different hemp varieties (Seward County-SC, York County-YC, Loup County-LC, 19 m96136-19 m, and CBD Hemp-CBD) were analyzed. Concentration of glucan and xylan ranged between 32.63 to 44.52% and 10.62 to 15.48% respectively. The biomass was then pretreated with Liquid hot water followed by disk milling and then hydrolyzed enzymatically to yield monomeric sugars. High glucose (63-85%) and xylose (73-88%) recovery was achieved. Lipids were extracted from hemp using hexane and isopropanol and then transesterified to produce biodiesel. Approximately, 50% of total fatty acids in SC, LC, and CBD hemp were linoleic acid. Palmitic acid was present between 32 to 50% in varieties YC and 19 m. Highest TAG concentration at 25% of total lipids was observed in CBD hemp. The analysis on lipid composition and high sugar recovery demonstrates hemp as a potential bioenergy crop for ethanol and biodiesel coproduction.

Biomass Analytics↗

Investigation of Bio-Diesel Fueled Engines under Low-Temperature Combustion Strategies

In accordance with meeting DOE technical targets this research was aimed at developing and optimizing new fuel injection technologies and strategies for the combustion of clean burning renewable fuels in diesel engines. In addition a simultaneous minimum 20% improvement in fuel economy was targeted with the aid of this novel advanced combustion system. Biodiesel and other renewable fuels have unique properties that can be leveraged to reduce emissions and increase engine efficiency. This research is an investigation into the combustion characteristics of biodiesel and its impacts on the performance of a Low Temperature Combustion (LTC) engine, which is a novel engine configuration that incorporates technologies and strategies for simultaneously reducing NOx and particulate emissions while increasing engine efficiency. Generating fundamental knowledge about the properties of biodiesel and blends with petroleum-derived diesel and their impact on in-cylinder fuel atomization and combustion processes was an important initial step to being able to optimize fuel injection strategies as well as introduce new technologies. With the benefit of this knowledge experiments were performed on both optical and metal LTC engines in which combustion and emissions could be observed and measured under realistic conditions. With the aid these experiments and detailed combustion models strategies were identified and applied in order to improve fuel economy and simultaneously reduce emissions.

33 ADVANCED PROPULSION SYSTEMS↗