Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Aromatics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Aromatic biosynthesis in pine tissues

Pinus elliotti is a woody plant species responsive to gravity and capable of synthesizing large quantities of lignin. Lignification begins very quickly after germination; lignin is detected in the vascular region within 4 days after germination and rapidly progresses up the hypocotyl. Young pine seedlings bend in response to geostimulation for about 10 days after germination, with the most rapid response time occurring in 4- to 5-day-old seedlings. Various chemicals were used to establish their effects on the geotropic response in this gymnosperm species. IAA completely arrests the geotropic response for 18 to 24 hr. Afterward the seedlings respond geostimulation as if they were not treated. The same pattern of response will occur with a second IAA treatment. If the synthetic auxin, 2-4,D, is used, the georesponse is permanently blocked. The method of application does not appear to be critical; addition of auxin to only one side of the seedling gave results similar to those obtained by treating the entire seedling.

Cowles, J. R.↗
NASA NTRS1984

Aliphatic-Aromatic Heterocyclics as Potential Thermoplastics for Composite Matrices

The successful development of impact- and solvent-resistant thermoplastic systems for glass graphite composites is particularly attractive because of the demonstrated streamlined manufacturability of such composites. Hypothetically, thermoplastics only require simple heating and cooling cycles for component manufacture, whereas thermosets require precise, and possibly extended heating schedules which must be consistent with the cure chemistry. The sensitivity of the majority of existing thermoplastics to aircraft fluids and other solvents preempts their serious consideration in aircraft components. This is the basic reason that Acurex proposed insolubility in common solvents as the starting point. The target properties are summarized as follows: (1) prepreg properties (use of conventional prepregging equipment, 6+ months shelf stability, processability, and thermoformability); and (2) composite properties (-54 C to 93 C capability, good mechanical properties, good environmental properties, and impact resistance).

Delano, C. B.↗
NASA NTRS1985

Processable aromatic polyimides

Two similar polyimide systems were synthesized and characterized. The only structural difference was a sulfide linkage in the anhydride-derived portion of the first system vs. a sulfone linkage in the second. Their physical, mechanical, melt-flow and thermal properties, and their resistance to some of the more common solvents were determined. The flow properties of these polyimides indicate a potential for melt processability.

Burks, H. D.↗
NASA NTRS1985

All-aromatic biphenylene end-capped polyquinoline and polyimide matrix resins

Biphenylene end-capped polyquinoline and polyimide resins afford low void content graphite-reinforced composites with good initial properties. However, with both resins, rapid degradation occurs during oxidative isothermal aging at elevated temperatures. The degradation is not observed during isothermal aging under a nitrogen atmosphere which suggests that the biphenylene end-cap (or the resulting crosslink/chain extension structures) is not particularly thermooxidatively stable. The nature of the thermooxidative instability is currently under investigation.

Droske, J. P.↗
NASA NTRS1985

Maleimido substituted aromatic cyclotriphosphazenes

4-Aminophenoxy cyclotriphosphazenes are reacted with maleic anhydride to produce maleamic acids which are converted to the maleimides. The maleimides are polymerized. By selection of starting materials (e.g., hexakis amino or trisaminophenoxy-trisphenoxy-cyclo-triphosphazenes), selection of molar proportions of reactants, use of mixtures of anhydrides and use of dianhydrides as bridging groups a variety of maleimides and polymers are produced. The polymers have high limiting oxygen indices, high char yields and other useful heat and fire resistant properties making them useful as, for example, impregnants of fabrics.

Kumar, D.↗
NASA NTRS1986

Ionized polycyclic aromatic hydrocarbons in space

The mid-infrared spectrum of a continuously increasing number of stellar objects, planetary and reflection nebulae, H-II regions and extragalactic sources show a distinctive set of broad emission features at 3.3, 3.4, 6.2, 7.7, 8.6, and 11.3 micron known collectively as the unidentified infrared emission bands. A model is summarized in which the bands arise from positively charged polycyclic hydrocarbons (PAH's) on the basis of their low ionization potential and the excellent agreement between the emission bands and laboratory spectra of auto exhaust which contains these types of molecules. The proposed presence of PAHs in such a variety of objects points to their presence in the interstellar medium. Out of a previously published collection of solid state PAH radical cation spectra five were selected on the basis of the unique thermodynamic stability of their carrier and compared directly to the wavelengths of the DIB's. Although the match seems quite favorable, strongly suggesting that PAH radicals are the long sought after carrier of the diffuse interstellar absorption bands, much laboratory work must be done to test this hypothesis.

Barker, J.↗
NASA NTRS1987

Fire and heat resistant laminating resins based on maleimido substituted aromatic cyclotriphosphazene polymer

4-Aminophenoxy cyclotriphosphazenes are reacted with maleic anhydride to produce maleamic acids which are converted to the maleimides. The maleimides are polymerized. By selection of starting materials (e.g., hexakis amino or trisaminophenoxy trisphenoxy cyclotriphosphazenes), selection of molar proportions of reactants, use of mixtures of anhydrides and use of dianhydrides as bridging groups a variety of maleimides and polymers are produced. The polymers have high limiting oxygen indices, high char yields and other useful heat and fire resistant properties making them useful as, for example, impregnants of fabrics.

Kumar, Devendra↗
NASA NTRS1986

Kinetic study of polymerization/curing of filament-wound composite epoxy resin systems with aromatic diamines

The kinetics of polymerization/curing of a filament-wound composite epoxy resin consisting of an 80/20 DGEBA/DGEBD blend and an MDA/m-PDA blend (Tonox 60/40) was studied at various temperatures and at amine epoxy ratios between 1.1 and 4.4 by means of Fourier-transform (FT) IR and bulk viscosity measurements. The activation energy for the polymerization/curing reaction using an amine/epoxy ratio of 1.1 was 11.9 kcal/mole, in agreement with a previous value. The FT-IR conversion-time plots were fitted to a kinetic expression containing two rate constants with activation energies of 13.7 and 10.0 kcal/mole. The bulk viscosity followed the Williams et al. (1955) equation, with a Di Benedetto (1965) expression for the glass transition temperature.

Golub, M. A.↗
NASA NTRS1987

Ethynylated aromatics as high temperature matrix resins

Difunctional and trifunctional arylacetylenes were used as monomers to form thermoset matrix resin composites. Composites can be hot-pressed at 180 C to react 80 percent of the acetylene groups. Crosslinking is completed by postcuring at 350 C. The postcured resins are thermally stable to nominally 460 C in air. As a result of their high crosslink density, the matrix exhibits brittle failure when uniaxial composites are tested in tension. Failure of both uniaixial tensile and flexural specimens occurs in shear at the fiber-matrix interface. Tensile fracture stresses for 0-deg composites fabricated with 60 v/o Celion 6K graphite fiber were 827 MPa. The strain to failure was 0.5 percent. Composites fabricated with 8 harness satin Celion cloth (Fiberite 1133) and tested in tension also failed in shear at tensile stresses of 413 MPa.

Hurwitz, F. I.↗
NASA NTRS1988

Developing Crystallinity In Linear Aromatic Polyimides

New technique improves melt flow of polyimide. Uses chemical imidization or cyclodehydration techniques that do not cause significant decrease in molecular weight. Process involves dissolution of polyamide acid in amide solvent or mixture of ether and amide solvent at low percentage of solids followed by treatment of this solution with aprotic organic base, such as triethylamine or pyridine, for period of time prior to treatment with organic dehydrating agent. Latter treatments facilitates formation of polyimide. Useful for production of polyimide molding materials. Expected to have widespread application in preparation of easily processed adhesives, molding powders, and matrix resins.

St. Clair, Terry L.↗
NASA NTRS1988

Processable Aromatic Polyimide Thermoplastic Blends

Method developed for preparing readily-processable thermoplastic polyimides by blending linear, high-molecular-weight, polyimic acid solutions in ether solvents with ultrafine, semicrystalline, thermoplastic polyimide powders. Slurries formed used to make prepregs. Consolidation of prepregs into finsihed composites characterized by excellent melt flow during processing. Applied to film, fiber, fabric, metal, polymer, or composite surfaces. Used to make various stable slurries from which prepregs prepared.

Baucom, Robert M↗
NASA NTRS1986

Ethynylated aromatics as high temperature matrix resins

Difunctional and trifunctional arylacetylenes were used as monomers to form thermoset matrix resin composites. Composites can be hot pressed at 180 C to react 80 percent of the acetylene groups. Crosslinking is completed by postcuring at 350 C. The postcured resins are thermally stable to nominally 460 C in air. As a result of their high crosslink density, the matrix exhibits brittle failure when unaxial composites are tested in tension. Failure of both uniaxial tensile and flexural specimens occurs in shear at the fiber matrix interface. Tensile fracture stresses for 0 deg composites fabricated with 60 v/o Celion 6K graphite fiber were 827 MPa. The strain to failure was 0.5 percent. Composites fabricated with 8 harness satin Celion cloth (Fiberite 1133) and tested in tension also failed in shear at tensile stresses of 413 MPa.

Hurwitz, Frances I.↗
NASA NTRS1988

Aromatic cyclotriphosphazenes

Four-Aminophenoxy cyclotriphosphazenes are reacted with maleic anhydride to produce maleamic acids which are converted to the maleimides. The maleimides are polymerized. By selection of starting materials (e.g., hexakis amino or trisaminophenoxy trisphenoxy cyclotrisphosphazenes), selection of molar porportions of reactants, use of mixtures of anhydrides and use of dianhydrides as bridging groups a variety of maleimides and polymers are produced. The polymers have high limiting oxygen indices, high char yields and other useful heat and fire resistant properties making them useful as, for example, impregnants of fabrics.

Kamar, Devendra↗
NASA NTRS1988

Non-isothermal crystallization of poly(etheretherketone) aromatic polymer composite

The nonisothermal crystallization kinetics of PEEK APC-2 and of 450G neat resin PEEK material were compared using a differential scanning calorimeter to monitor heat flow during crystallization; the effects of cooling rate on the crystallization temperature, the degree of crystallinity, and the conversion rate were investigated. A modified Avrami (1940) analysis was used to describe nonisothermal crystallization kinetics. It was found that, compared with the 450G neat resin PEEK, the nonisothermal crystallization of the PEEK APC-2 composite is characterized by higher initiation temperature, higher heat flow maximum temperature, and greater relative conversion by primary processes.

Cebe, Peggy↗
NASA NTRS1989

New emission features in the 11-13 micron region and their relationship to polycyclic aromatic hydrocarbons

Moderate-resolution spectra of NGC 7027, HD 44179, IRAS 2182+5050, and BD +30 deg 3639 are presented, showing that the 11.3-micron feature actually peaks at 11.22 microns. Evidence is found for new emission features near 11.9 and 12.7 microns, supporting an origin from PAHs. Also, the observed asymmetry of the 11.3-micron band is consistent with the anharmonicity expected in the C-H out-of-plane bending mode in PAHs. The analysis of the 11-13-micron emission suggests that the molecular structures of the most intensely emitting free PAHs vary between the high-excitation environment in NGC 7027 and the low-excitation but high-flux environment close to HD 44179. In addition, a series of regularly spaced features between 10 and 11 microns is detected in the spectrum of HD 44179, suggesting that a simple polyatomic hydride is present in the object's gas phase.

Witteborn, F. C.↗
NASA NTRS1989

Spatial variations of the 3 micron emission features within UV-excited nebulae - Photochemical evolution of interstellar polycyclic aromatic hydrocarbons

Spectra at 3 microns have been obtained at several positions in the Orion Bar region and in the nebula surrounding HD 44179. Weak emission features at 3.40, 3.46, 3.51, and 3.57 microns are prominent in the Orion Bar region. The 3.40- and 3.51-micron features increase in intensity relative to the dominant 3.29-micron feature. The spectrum obtained in the Red Rectangle region 5 arcsecs north of HD 44179 are similar to those in the Orion Bar, with a weak, broad 3.40-micron feature at the position of HD 44179. The spatial behavior of the weak emission features is explained in terms of hot bands of the CH stretch and overtones, and combination bands of other fundamental vibrations in simple PAHs. Based on the susceptibility of PAHs to destruction by the far UV fields in both regions, PAH sizes are estimated at 20-50 carbon atoms.

Geballe, T. R.↗