Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Antennas”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Three‐Dimensional Broadband Interferometric Mapping and Polarization (BIMAP‐3D) Observations of Lightning Discharge Processes

Abstract Following on our earlier single‐station, 2‐dimensional (2D) broadband interferometric mapping and polarization (BIMAP) observations of lightning discharges, we recently deployed two BIMAP stations at Los Alamos National Laboratory to map the lightning sources and their polarization in full 3‐dimensional (3D) space (BIMAP‐3D). The two stations are separated by 11.5‐km and each station consists of four antenna sets (instead of three for the original BIMAP) that form a Y ‐shaped array for improved interferometric performance. In this paper, we report the BIMAP‐3D system design, a generalized and analytical 2D interferometry technique for noncoplanar antenna array, a two‐stage 3D mapping technique based on geometric triangulation and baseline‐based differential time of arrival, and a technique to reconstruct the polarization orientation in 3D space by combining the 2D polarization results from the two‐station observations. Along with description of the techniques, we demonstrate and discuss the initial lightning results, including 3D maps for a hybrid intracloud and cloud‐to‐ground flash and for a normal intracloud flash, development of abnormal K‐change leaders, and polarization signatures for a K‐change leader. We find that with the two‐stage 3D mapping techniques, the sources can be located to meters accuracy for a favorable event that occurs between the two stations. We also find the polarization vectors for the example K leader are mostly orthogonal to the leader channel after the full 3D polarization analysis. The main purpose of this paper is to report the BIMAP‐3D techniques and capabilities. Detailed analysis of more specific discharge processes will be reported in later studies.

54 ENVIRONMENTAL SCIENCES↗

Spectral Hardness of X- and Gamma-Ray Emissions From Lightning Stepped and Dart Leaders

During the 2022 New Mexico monsoon season, we deployed two X-ray scintillation detectors, coupled with a 180 MHz data acquisition system to detect X-rays from natural lightning at the Langmuir Lab mountain-top facility, located at 3.3 km above mean sea level. Data acquisition was triggered by an electric field antenna calibrated to pick up lightning within a few km of the X-ray detectors. We report the energies of over 240 individual photons, ranging between 13 keV and 3.8 MeV, as registered by the LaBr3(Ce) scintillation detector. These detections were associated with four lightning flashes. Particularly, four-stepped leaders and seven dart leaders produced energetic radiation. Importantly, the reported photon energies allowed us to confirm that the X-ray energy distribution of natural stepped and dart leaders follows a power-law distribution with an exponent ranging between 1.09 and 1.96, with stepped leaders having a harder spectrum. Characterization of the associated leaders and return strokes was done with four different electric field sensing antennas, which can measure a wide range of time scales, from the static storm field to the fast change associated with dart leaders.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Bioinspiration in light harvesting and catalysis

Capturing and converting solar energy into fuels and feedstocks is a global challenge that spans numerous disciplines and fields of research. Billions of years of evolution have allowed natural organisms to hone strategies for harvesting light from the sun and storing energy in the form of carbon–carbon and carbon–hydrogen bonds. Photosynthetic antenna proteins capture solar photons and funnel photoexcitations to reaction centres with high yields, and enzymes catalyze multi-electron reactions, facilitating chemical transformations not yet efficiently implemented using artificially engineered catalysts. Researchers in renewable energy often look to nature to understand the mechanisms at work and, if possible, to explore their translation into artificial systems. Here, we review advances in bioinspiration across the fields of biological light harvesting and chemical energy conversion. We examine how multi-photon and multi-electron reactions in biology can inspire new methods in photoredox chemistry to achieve novel, selective and complex organic transformations; how carbonic-dehydrogenase-inspired design principles enable catalytic reactions such as the conversion of CO 2 into useful products such as fuels; and how concepts from photosynthetic antenna complexes and reaction centres can benefit artificial light-harvesting materials. We then consider areas in which bioinspiration could enable advances in the rational design of molecules and materials, the expansion of the synthetic capabilities of catalysts and the valorization of molecular building blocks. Here, we highlight the challenges that must be overcome to realize these advances and propose new directions that may use bioinspiration to achieve them.

36 MATERIALS SCIENCE↗

Structures of a phycobilisome in light-harvesting and photoprotected states

Phycobilisome (PBS) structures are elaborate antennae in cyanobacteria and red algae 1,2 . These large protein complexes capture incident sunlight and transfer the energy through a network of embedded pigment molecules called bilins to the photosynthetic reaction centres. However, light harvesting must also be balanced against the risks of photodamage. A known mode of photoprotection is mediated by orange carotenoid protein (OCP), which binds to PBS when light intensities are high to mediate photoprotective, non-photochemical quenching 3-6 . Here we use cryogenic electron microscopy to solve four structures of the 6.2 MDa PBS, with and without OCP bound, from the model cyanobacterium Synechocystis sp. PCC 6803. The structures contain a previously undescribed linker protein that binds to the membrane-facing side of PBS. For the unquenched PBS, the structures also reveal three different conformational states of the antenna, two previously unknown. The conformational states result from positional switching of two of the rods and may constitute a new mode of regulation of light harvesting. Further, only one of the three PBS conformations can bind to OCP, which suggests that not every PBS is equally susceptible to non-photochemical quenching. In the OCP-PBS complex, quenching is achieved through the binding of four 34kDa OCPs organized as two dimers. The complex reveals the structure of the active form of OCP, in which an approximately 60Å displacement of its regulatory carboxy terminal domain occurs. Finally, by combining our structure with spectroscopic properties 7 , we elucidate energy transfer pathways within PBS in both the quenched and light-harvesting states. Collectively, our results provide detailed insights into the biophysical underpinnings of the control of cyanobacterial light harvesting. The data also have implications for bioengineering PBS regulation in natural and artificial light-harvesting systems.

59 BASIC BIOLOGICAL SCIENCES↗

Finite-difference time-domain methods

The finite-difference time-domain (FDTD) method is a widespread numerical tool for full-wave analysis of electromagnetic fields in complex media and for detailed geometries. Applications of the FDTD method cover a range of time and spatial scales, extending from subatomic to galactic lengths and from classical to quantum physics. Technology areas that benefit from the FDTD method include biomedicine — bioimaging, biophotonics, bioelectronics and biosensors; geophysics — remote sensing, communications, space weather hazards and geolocation; metamaterials — sub-wavelength focusing lenses, electromagnetic cloaks and continuously scanning leaky-wave antennas; optics — diffractive optical elements, photonic bandgap structures, photonic crystal waveguides and ring-resonator devices; plasmonics — plasmonic waveguides and antennas; and quantum applications — quantum devices and quantum radar. This Primer summarizes the main features of the FDTD method, along with key extensions that enable accurate solutions to be obtained for different research questions. Additionally, hardware considerations are discussed, plus examples of how to extract magnitude and phase data, Brillouin diagrams and scattering parameters from the output of an FDTD model. Furthermore, the Primer ends with a discussion of ongoing challenges and opportunities to further enhance the FDTD method for current and future applications.

42 ENGINEERING↗

Effects of density turbulence on helicon wave propagation in the core plasmas

Radio frequency wave propagation can be significantly affected by density irregularities, such as filaments in the scrape-off layer or instabilities in the core plasma. In this study, we examine the impact of edge turbulence on helicon wave propagation using the Petra-M simulation tool. To analyze the effect of edge turbulence, we utilize a realistic background plasma derived from XGC simulations, which includes spatial density fluctuations at the edge. This focus is particularly relevant for the DIII-D configuration, characterized by edge density turbulence of the core plasmas in a wide pedestal QH-mode. We focus on helicon wave propagation in the core plasma since the slow mode cannot propagate into the core plasma when the density is higher than the lower hybrid resonance, where a wide pedestal QH-mode occurs. The simulation results indicate that edge density fluctuations have a substantial impact on helicon wave coupling due to scattering in the core. We specifically demonstrate that the toroidal mode number and the level of density fluctuations are significant factors influencing scattering. While we have minimized the excitation of slow modes from the antenna, we still observe mode-converted slow modes resulting from the incoming helicon waves. The insights derived from these simulations will inform upcoming tokamak experiments regarding helicon antenna coupling in long pulse scenarios.

Kim, Eun-Hwa [Princeton Plasma Physics Laboratory ↗

Measurement and modeling of the radio frequency sheath impedance in a large magnetized plasma

The DC and RF properties of radio frequency (RF) driven sheaths were studied in the Large Plasma Device (LAPD) at the University of California, Los Angeles. The experiments diagnosed RF sheaths on field lines connected to a grounded plate at one end and an ion cyclotron range of frequencies (ICRF) antenna at the other end. The experimental setup permitted measurement of the RF sheath impedance at the plate as a function of DC sheath voltage, with the latter controlled by varying the RF current applied to the antenna. Here, the DC current-voltage characteristics of these sheaths and the RF sheath impedance measurements were compared with modeling. Hot electrons, present in the LAPD plasma, were inferred to contribute significantly to both the DC and RF currents and hence the RF impedance. It was postulated that at very low power hot electrons could not access the region of the plasma subject to RF waves, resulting in an increased RF impedance. Within some experimental limitations and significant assumptions, an RF sheath impedance model was verified by the experimental data.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A 1D coupled transport/cold plasma wave model for parallel ponderomotive density modification near RF actuators

The plasma density profile close to RF actuators plays a vital role in the efficiency of power coupling from the antenna to the core plasma of fusion devices. Nonlinear interactions can be significant when considering the interaction of applied RF power and the tenuous SOL plasma, and the inclusion of this region in computational analysis is essential to providing robust predictive simulations of plasma response to RF application. Of particular interest is the observed density modification during RF operation. Here we present a self consistent description of the nonlinear ponderomotive force in the antenna near field region, via coupling a 1D field aligned transport model with a 1D cold plasma wave model. Results are presented, which show a parallel electric field of 300 Vm -1 drove a density reduction of ~ 20% over 25 RF periods.

Barnett, Rhea↗

Scoping study of detecting high harmonic fast waves in NSTX-U hot core plasma directly using beam emission spectroscopy

In this paper, we used radio frequency (RF) full wave simulation to explore the feasibility of generating a density beat oscillation formed by high harmonic fast waves (HHFWs) in the National Spherical Tokamak Experiment-Upgrade (NSTX-U) and of measuring it numerically with 2D beam emission spectroscopy (BES). This oscillation is of interest as it can be used to determine the injected RF fields. We began by computing HHFW fields in NSTX-U under a variety of experimental conditions and antenna configurations with Petra-M, a 3D RF wavefield solver. These fields were then used to evaluate the amplitude of δne,beat/ne0 in the volume of measurement, which we predict to be between 5 × 10−10 and 10−9, although it is highly dependent on plasma parameters. Trends in magnetic field, core temperature, core density, and antenna phasing are presented, and the parameters most suitable to this measurement are identified. Finally, we developed a synthetic BES diagnostic to compare the experimental BES signal against.

Rutherford, Grant (ORCID:0000000163620037)↗

Optimizing the differential connection schemes for detecting 3D magnetic perturbations in DIII-D

Optimizing the differential pair connection scheme (i.e. the set of pairs) of a toroidal array of magnetic sensors dedicated to measuring slowly rotating asymmetric fields can enhance the mode number detection capability and failure-resilience. In this work the condition number obtained from singular value decomposition (SVD) of the design matrix is used as a metric to evaluate the quality of a connection scheme. A large number of possible pair connections are usually available, so evaluating all of them may require extensive use of computational resources and can be very time consuming. Alternative methods to reduce the number of pairs evaluated without losing the capabilities of toroidal mode detection are presented in this paper. Here, three examples of the applications of such analysis for the 3D magnetic diagnostic system of DIII-D are also presented: the addition of two new toroidal arrays with n > 3 detection capabilities, the modification of an existing toroidal array in the low field side of the machine to accommodate the addition of a helicon antenna, and the design of changes in several toroidal arrays in the high field side to accommodate the addition of a lower hybrid current drive antenna on the center post.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

RF sheath induced sputtering on Proto-MPEX part 2: Impurity transport modeling and experimental comparison

The Prototype Material Plasma Exposure eXperiment (Proto-MPEX) is a pulsed linear plasma device that uses a radio frequency (RF) helicon antenna and a helicon ceramic window as the plasma ionization source. Modeling performed within this work on the helicon operations predicts hot spots on the helicon ceramic window due to an RF-induced sheath. The RF sheath potential leads to physical sputtering of the ceramic window predominantly where the helicon antenna sits around the helicon window. The role of oxygen in sputtering within Proto-MPEX is also investigated and is needed to match the experimental data. Experiments on Proto-MPEX show reasonable agreement with the modeled erosion/redeposition pattern on the helicon window, and the modeled impurity flux to the target shows radial transport within the device as expected from classical collisional impurity transport. Temperature screening of impurities is shown to be needed for Proto-MPEX to reduce impurity flux to the target. The modeling approach used in this work can be applied to other plasma RF applications for the determination of impurity production and transport.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Ion cyclotron heating at high plasma density in Proto-MPEX

The physics of ion cyclotron heating (ICH) relevant to the steady-state linear machine MPEX (Material Plasma Exposure eXperiment) has been explored in its predecessor, short-pulse device: Proto-MPEX. MPEX will utilize fundamental ICH to increase heat flux at the target and produce ion temperatures and velocity distributions with improved fidelity to those found in a tokamak divertor region, in comparison to those produced by substrate biasing. In the experiments on Proto-MPEX described here, bulk ion temperatures up to ~15 eV have been achieved with 20 kW net ICH power at 6.5 MHz, using ICH heating of a deuterium plasma produced by a helicon plasma source. The heat flux at the target has been observed to increase throughout the plasma cross section, including in the core region. Core $T_i$ and target heat flux are observed to scale linearly with injected ICH power. Further, measurements of plasma loading and target heat flux as a function of the magnetic field strength at the antenna, together with modeling of the wave propagation from the antenna to the ion cyclotron resonance using the ANTENA and COMSOL codes with a warm plasma dielectric tensor, indicate that power is coupled to the core plasma via fast wave excitation of a kinetic Alfvén wave.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

An efficient protocol for excited states of large biochromophores

Efficient energy transport in photosynthetic antenna is a long-standing source of inspiration for artificial light harvesting materials. However, characterizing the excited states of the constituent chromophores poses a considerable challenge to mainstream quantum chemical and semiempirical excited state methods due to their size and complexity and the accuracy required to describe small but functionally important changes in their properties. In this paper, we explore an alternative approach to calculating the excited states of large biochromophores, exemplified by a specific method for calculating the Q y transition of bacteriochlorophyll a, which we name Chl-xTB. Using a diagonally dominant approximation to the Casida equation and a bespoke parameterization scheme, Chl-xTB can match time-dependent density functional theory’s accuracy and semiempirical speed for calculating the potential energy surfaces and absorption spectra of chlorophylls. We demonstrate that Chl-xTB (and other prospective realizations of our protocol) can be integrated into multiscale models, including concurrent excitonic and point-charge embedding frameworks, enabling the analysis of biochromophore networks in a native environment. We exploit this capability to probe the low-frequency spectral densities of excitonic energies and interchromophore interactions in the light harvesting antenna protein LH2 (light harvesting complex 2). The impact of low-frequency protein motion on interchromophore coupling and exciton transport has routinely been ignored due to the prohibitive costs of including it in simulations. Our results provide a more rigorous basis for continued use of this approximation by demonstrating that exciton transition energies are unaffected by low-frequency vibrational coupling to exciton interaction energies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Unidirectional microwave transduction with chirality selected short-wavelength magnon excitations

Nonreciprocal magnon propagation has recently become a highly potential approach of developing chip-embedded microwave isolators for advanced information processing. However, it is challenging to achieve large nonreciprocity in miniaturized magnetic thin-film devices because of the difficulty of distinguishing propagating surface spin waves along the opposite directions when the film thickness is small. In this work, we experimentally realize unidirectional microwave transduction with sub-micrometer-wavelength propagating magnons in a yttrium iron garnet (YIG) thin-film delay line. We achieve a non-decaying isolation of 30 dB with a broad field-tunable bandpass frequency range up to 14 GHz. The large isolation is due to the selection of chiral magnetostatic surface spin waves with the Oersted field generated from the coplanar waveguide antenna. Increasing the geometry ratio between the antenna width and YIG thickness drastically reduces the nonreciprocity and introduces additional magnon transmission bands. Furthermore, our results pave the way for on-chip microwave isolation and tunable delay line with short-wavelength magnonic excitations.

36 MATERIALS SCIENCE↗

Photosynthesis tunes quantum-mechanical mixing of electronic and vibrational states to steer exciton energy transfer

Significance Photosynthetic light-harvesting antennae transfer energy toward reaction centers with high efficiency, but in high light or oxidative environments, the antennae divert energy to protect the photosynthetic apparatus. For a decade, quantum effects driven by vibronic coupling, where electronic and vibrational states couple, have been suggested to explain the energy transfer efficiency, but questions remain whether quantum effects are merely consequences of molecular systems. Here, we show evidence that biology tunes interpigment vibronic coupling, indicating that the quantum mechanism is operative in the efficient transfer regime and exploited by evolution for photoprotection. Specifically, the Fenna–Matthews–Olson complex uses redox-active cysteine residues to tune the resonance between its excitons and a pigment vibration to steer excess excitation toward a quenching site.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Charge transfer as a mechanism for chlorophyll fluorescence concentration quenching

Highly concentrated solutions of chlorophyll display rapid fluorescence quenching. The same devastating energy loss is not seen in photosynthetic light-harvesting antenna complexes, despite the need for chromophores to be in close proximity to facilitate energy transfer. A promising, though unconfirmed mechanism for the observed quenching is energy transfer from an excited chlorophyll monomer to a closely associated chlorophyll pair that subsequently undergoes rapid nonradiative decay to the ground state via a short-lived intermediate charge-transfer state. In this work, we make use of newly emerging fast methods in quantum chemistry to assess the feasibility of this proposed mechanism. We calculate rate constants for the initial charge separation, based on Marcus free-energy surfaces extracted from molecular dynamics simulations of solvated chlorophyll pairs, demonstrating that this pathway will compete with fluorescence (i.e., drive quenching) at experimentally measured quenching concentrations. We show that the rate of charge separation is highly sensitive to interchlorophyll distance and the relative orientations of chromophores within a quenching pair. We discuss possible solvent effects on the rate of charge separation (and consequently the degree of quenching), using the light-harvesting complex II (LH2) protein from rps. acidophila as a specific example of how this process might be controlled in a protein environment. Crucially, we reveal that the LH2 antenna protein prevents quenching, even at the high chlorophyll concentrations required for efficient energy transfer, by restricting the range of orientations that neighboring chlorophyll pairs can adopt.

59 BASIC BIOLOGICAL SCIENCES↗

Pumping Iron: A Multi-omics Analysis of Two Extremophilic Algae Reveals Iron Economy Management

Marine algae are responsible for half of the world's primary productivity, but this critical carbonsink is often constrained by insufficient iron. One species of marine algae, Dunaliella tertiolecta, isremarkable for its ability to maintain photosynthesis and thrive in low-iron environments. A relatedspecies, Dunaliella salina Bardawil, shares this attribute but is an extremophile found in hypersaline environments. To elucidate how algae manage their iron requirements, we produced highquality genome assemblies and transcriptomes for both species to serve as a foundation for acomparative multi-omics analysis. We identified a host of iron-uptake proteins in both species,including a massive expansion of transferrins and a novel family of siderophore-iron uptakeproteins. Complementing these multiple iron-uptake routes, ferredoxin functions as a large ironreservoir that can be released by induction of flavodoxin. Proteomic analysis revealed reducedinvestment in the photosynthetic apparatus coupled with remodeling of antenna proteins bydramatic iron-deficiency induction of TIDI1, a light harvesting complex protein found also in otherchlorophytes. These combinatorial iron scavenging and sparing strategies make Dunaliellaunique among photosynthetic organisms

iron homeostasis, phytoplankton, Iron starvation i↗

A distinct LHCI arrangement is recruited to photosystem I in Fe-starved green algae

Iron (Fe) availability limits photosynthesis at a global scale where Fe-rich photosystem (PS) I abundance is drastically reduced in Fe-poor environments. We used single-particle cryoelectron microscopy to reveal a unique Fe starvation-dependent arrangement of light-harvesting chlorophyll (LHC) proteins where Fe starvation–induced TIDI1 is found in an additional tetramer of LHC proteins associated with PSI in Dunaliella tertiolecta and Dunaliella salina . These cosmopolitan green algae are resilient to poor Fe nutrition. TIDI1 is a distinct LHC protein that co-occurs in diverse algae with flavodoxin (an Fe-independent replacement for the Fe-containing ferredoxin). The antenna expansion in eukaryotic algae we describe here is reminiscent of the iron-starvation induced (isiA-encoding) antenna ring in cyanobacteria, which typically co-occurs with isiB , encoding flavodoxin. Our work showcases the convergent strategies that evolved after the Great Oxidation Event to maintain PSI capacity.

59 BASIC BIOLOGICAL SCIENCES↗