Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Anisotropic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Renormalization group analysis of anisotropic diffusion in turbulent shear flows

The renormalization group is applied to compute anisotropic corrections to the scalar eddy diffusivity representation of turbulent diffusion of a passive scalar. The corrections are linear in the mean velocity gradients. All model constants are computed theoretically. A form of the theory valid at arbitrary Reynolds number is derived. The theory applies only when convection of the velocity-scalar correlation can be neglected. A ratio of diffusivity components, found experimentally to have a nearly constant value in a variety of shear flows, is computed theoretically for flows in a certain state of equilibrium. The theoretical value is well within the fairly narrow range of experimentally observed values. Theoretical predictions of this diffusivity ratio are also compared with data from experiments and direct numerical simulations of homogeneous shear flows with constant velocity and scalar gradients.

Rubinstein, Robert↗
NASA NTRS1991

Anisotropic inverse Compton emission

The angular distribution of the power and spectrum of Compton-scattered radiation in the case of an anisotropic distribution of soft photons is considered. Results obtained show that both the intensity and spectrum of the scattered radiation are a function of the Lorentz factor of the electrons, the geometry of the soft X-ray source and the viewing angle. The intensity of the hard X-rays scattered back into the bowl can be significantly greater (by a factor of up to 5.5) than that scattered toward the observer for an isotropic distribution of relativistic electrons at the center of a hemispherical bowl of soft X-ray emission. This factor is increased as the solid angle of the soft X-ray source subtended at the location of the electrons is reduced. The results obtained here have inmplications for models invoking a further 'reflection' of the resultant hard X-rays from the surface of a disk.

Ghisellini, G.↗
NASA NTRS1991

The effects of rotation on initially anisotropic homogeneous flows

Rotation of initially anisotropic homogeneous flows is studied using a model spectral tensor. It is shown that the anisotropy changes because of the influence of rotation through phase scrambling. Phase scrambling causes the Reynolds stresses to develop with damped oscillations. The final Reynolds stress anisotropy is found to be proportional to the initial structural tensor anisotropy. Closure models for the rapid pressure strain terms should reflect this change in anisotropy, and should drive the anisotropy to reach its final predicted state. Finally, it is shown that long-time integration using direct numerical simulations should be treated with care because phase scrambling effects on a discrete wave space can cause loss of resolution when time becomes large.

Mansour, Nagi N.↗
NASA NTRS1991

Effects of anisotropic conduction and heat pipe interaction on minimum mass space radiators

Equations are formulated for the two dimensional, anisotropic conduction of heat in space radiator fins. The transverse temperature field was obtained by the integral method, and the axial field by numerical integration. A shape factor, defined for the axial boundary condition, simplifies the analysis and renders the results applicable to general heat pipe/conduction fin interface designs. The thermal results are summarized in terms of the fin efficiency, a radiation/axial conductance number, and a transverse conductance surface Biot number. These relations, together with those for mass distribution between fins and heat pipes, were used in predicting the minimum radiator mass for fixed thermal properties and fin efficiency. This mass is found to decrease monotonically with increasing fin conductivity. Sensitivities of the minimum mass designs to the problem parameters are determined.

Baker, Karl W.↗
NASA NTRS1992

A viscoplastic theory for anisotropic materials

The purpose of this work is the development of a unified, cyclic, viscoplastic model for anisotropic materials. The first part of the paper presents the foundations of the model in the framework of thermodynamics with internal variables. The second part considers the particular case of cubic symmetry, and addresses the cyclic behavior of a nickel-base single-crystal superalloy, CMSX-2, at high temperature (950 C).

Nouailhas, D.↗
NASA NTRS1992

Radiative transfer solutions for cylindrical coordinates with emitting, absorbing, and anisotropic scattering medium

The radiative transfer equation is solved by the S-N discrete ordinates method in one-dimensional radial and two-dimensional r-z coordinates systems. The walls of the enclosures are diffuse, and the participating medium absorbs, emits and anisotropically scatters the radiative energy. Diffuse wall incidence, isothermal medium emission and collimated incidence problems are considered. Effects of the scattering phase functions on average incident radiation and net radiative heat fluxes are studied. In addition, the effects of scattering albedo, optical thickness and the wall emissivity are briefly discussed.

Jendoubi, Slah↗
NASA NTRS1991

Transient motion of thick anisotropic plates

Analyses are developed for the response of anisotropic plate strips to a transient load. The load is taken in the form of a line load of normal stress on the surface or within the body of the strip. The characteristic free vibrational modes of the strip are derived and used to derive the secular equation for this case in closed form and to isolate the mathematical conditions for symmetric and antisymmetric wave mode propagation in completely separate terms. The applied loads are expanded in terms of these normal modes and the response of the plate is obtained by superposition of the appropriate components. Material systems of higher symmetry are contained implicitly in the analysis.

Nayfeh, Adnan H.↗
NASA NTRS1992

Birkeland currents in an anisotropic, magnetostatic plasma

The paper derives an expression for the parallel current density for a plasma characterized by negligible bulk flow (magnetostatic velocity and a two-component (anisotropic) pressure tensor by expanding the equilibrium Vlasov equation for each species in the adiabatic parameter until such point as a nonvanishing moment j-parallel = integral d-cubed vv-parallel f is identified. The result is a nonlocal one: it relates j-parallel at one point s along a field line to j-parallel at another (reference) point s0 plus an integral function of the pressure and magnetic field between them. The equation derived by Vasyliunas (1970) is generalized and extended to a plasma in which the pressure tensor is comprised of two separate elements, P-perpendicular and P-parallel. This equation follows when P-perpendicular is set equal to P-parallel and s and s0 are taken to be at the ionosphere and the equator. These results are compared to others in the literature.

Birmingham, Thomas J.↗
NASA NTRS1992

Buckling of imperfect, anisotropic, ring-stiffened cylinders under combined loads

The objectives of this study is to develop an analysis to predict loads of ring-stiffened anisotropic cylinders subject to axial compression, torsion and internal pressure. This structure is modeled as a branched shell. A nonlinear axisymmetric prebuckling equilibrium state is assumed which is amenable to exact solution within each branch. Axisymmetric geometric imperfections are included. Buckling displacements are represented by a Fourier series in the circumferential coordinate and the finite element method in the axial coordinate. Application of Trefftz criterion to the second variation of the total potential energy leads to a nonlinear eigenvalue problem for the buckling load and mode. Results are presented for both unstiffened and ring-stiffened cylinders in the form of buckling interaction diagrams. Imperfections can cause an unexpected buckling mode in the ring web which would not occur for the perfect structure, and pressurization diminishes the benefit of adding rings to the unstiffened shell to increase the buckling load. The implementation of the analysis methodology into a structural sizing algorithm is discussed.

Ley, Robert P.↗
NASA NTRS1992

Initial postbuckling response of anisotropic laminated rectangular plates

It has been shown that anisotropic plates can have unstable postbuckling behavior resulting in potential imperfection sensitivity. The present paper quantifies the degree of instability for rectangular, simply supported asymmetrically laminated plates. The analysis is based on asymptotic Koiter-type expansion of postbuckling response. The degree of postbuckling instability is quantified in terms of the reduction in load carrying capacity in the immediate postbuckling range. For graphite-epoxy plates it is found that this measure of instability is very small unless the lamination asymmetry is very pronounced.

Johnson, Eric R.↗
NASA NTRS1992

Theory of anisotropic thin-walled closed-section beams with hygrothermal effects

A variationally consistent theory is developed in order to derive the governing equations of anisotropic thin-walled beams with closed sections subjected to axial load, torsion, bending and hygrothermal loads. The theory is based on an asymptotical analysis of two-dimensional shell theory. Closed-form expressions for the beam stiffness coefficients, equivalent hygrothermal loads, stress and displacement fields are provided. The influence of material anisotropy and hygrothermal coefficients on the displacement field is identified. The analysis is applied to predict the response of composite beams under thermomechanical loading.

Badir, Ashraf M.↗
NASA NTRS1992

Current collection in an anisotropic collisionless plasma

A general method is given to derive the current-potential relations in anisotropic plasmas. Orbit limit current is assumed. The collector is a conductive sphere or an infinite cylinder. Any distribution which is an arbitrary function of the velocity vector can be considered as a superposition of many mono-energetic beams whose current-potential relations are known. The results for two typical pitch angle distributions are derived and discussed in detail. The general properties of the current potential relations are very similar to that of a Maxwellian plasma except for an effective temperature which varies with the angle between the magnetic field and the charging surface. The conclusions are meaningful to generalized geometries.

Li, Wei-Wei↗
NASA NTRS1992

Rotational discontinuities in anisotropic plasmas

The kinetic structure of rotational discontinuities (RDs) in anisotropic plasmas with T-perpendicular/T-parallel is greater than 1 is investigated by using a 1D electromagnetic hybrid code. To form the RD, a new approach is used where the plasma is injected from one boundary and reflected from the other, resulting in the generation of a traveling fast shock and an RD. The results show that across the RD both the magnetic field strength and direction, as well as the plasma density change. Given that such a change can also be associated with an intermediate shock, the Rankine-Hugoniot relations are used to confirm that the observed structures are indeed RDs. It is found that the thickness of RDs is a few ion inertial lengths and is independent of the rotation angle. Also, the preferred sense of rotation is in the electron sense; however, RDs with a rotation angle larger than 180 deg are found to be unstable, changing their rotation to a stable ion sense.

Omidi, N.↗
NASA NTRS1992

MHD modeling of magnetotail instability for anisotropic pressure

Results of three-dimensional MHD simulations of magnetotail dynamics with anisotropic pressure are presented. The pressure tensor is assumed to be gyrotropic, satisfying a modified double adiabatic approximation including Ohmic heating. It is found that these constraints tend to stabilize the tail with respect to the resistive tearing instability. Including an increasing level of additional isotropization results in a gradual transition to the fast instability found in an isotropic model, which is discussed for comparison. Possible isotropization mechanisms yielding magnetotail instability are discussed also. The stabilizing anisotropies are found primarily in the plasma sheet boundary region. This fact indicates a possibly important role of isotropization mechanisms operating in this region in destabilizing the magnetotail and initiating a tearing instability without the necessity of changes in fluctuation levels in the neutral sheet.

Hesse, Michael↗
NASA NTRS1993

Energetic Atoms Would Etch Photoresists Anisotropically

Directed beams of single oxygen atoms having kinetic energies between 1 and 5 eV used in anisotropic etching of oxygen-labile photoresist patterns on silicon wafers. Key step in manufacturing integrated circuits on semiconductor wafers. Damage to semiconductor material under photoresist layer reduced or eliminated. Method incorporated into lithographic processes for fabrication of integrated circuits.

Koontz, Steven↗
NASA NTRS1993

Upper-Bound SEU Rates In Anisotropic Fluxes

Upper bounds on rates of single-event upsets (SEU's) in digital integrated circuits and other electronic devices exposed to anisotropic fluxes of energetic ionizing particles computed by use of improved method. Derived from simplified, worst-case mathematical models of charge-collecting volumes and physical phenomena in electronic devices.

Edmonds, Larry D.↗
NASA NTRS1993

Symmetry algebra of a generalized anisotropic harmonic oscillator

It is shown that the symmetry Lie algebra of a quantum system with accidental degeneracy can be obtained by means of the Noether's theorem. The procedure is illustrated by considering a generalized anisotropic two dimensional harmonic oscillator, which can have an infinite set of states with the same energy characterized by an u(1,1) Lie algebra.

Castanos, O.↗
NASA NTRS1992

Theory of anisotropic thin-walled closed-cross-section beams

A variationally and asymptotically consistent theory is developed in order to derive the governing equations of anisotropic thin-walled beams with closed sections. The theory is based on an asymptotic analysis of two-dimensional shell theory. Closed-form expressions for the beam-stiffness coefficients, stress and displacement fields are provided. The influence of material anisotropy on the displacement field is identified. A comparison with the displacement fields obtained by other analytical developments is performed. The stiffness coefficients and static response are also compared with finite element predictions, closed-form solutions and test data.

Berdichevsky, Victor↗