Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Alpha 5”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Deliverable for FαST project: Ln Resin based PLE

This memo describes the fabrication of a polymer ligand extractant based on Eichrom's LN-1 resin. This work has been in support of the Fast Alpha Spectrometry Tool (FαST) project. The first part of LANL's role in this project is to evaluate new extractants for use in polymer ligand extractants (PLEs). The first new extractant evaluated is Di(2-ethyl hexyl) phosphoric acid (HDEHP), which is an effective metal extractant. It has very efficient chelating properties for a wide variety of metal ions. HDEHP is an amphiphillic molecule with two long hydrocarbon chains and a polar end with a phosphoryl oxygen (P=O) and an acidic -OH group as shown in Figure 1. HDEHP has shown effectiveness in extracting lanthanides, selective actinides, and other trivalent elements. Several authors have reported that lanthanides and elements with +3 oxidation state have similar extraction behavior in nitric acid. The distribution ratio for lanthanides rapidly decreases at lower nitric concentration then start to increase at higher concentration as shown in. The trivalent americium, curium, and yttrium exhibit similar trend as trivalent lanthanides. This extraction trend can be also observed from hydrogen chloride solution. This work describes the use of this ligand in a PLE to extract plutonium from solution. Polymer ligand films were prepared by dissolving HDEHP ligands and polystyrene beads in THF. The solution was directly deposited onto a 40 mm diameter stainless steel substrate using an automated pipette. HDEHP based PLEs with direct stippling method are shown in Figure 2. The solution was air dried at room temperature overnight to ensure complete evaporation of THF. The plutonium tracer solution was prepared in 0.01, 0.1, 1, and 8M nitric solutions to study the effect of nitric concentration in plutonium extraction. 0.1667 Bq 239 Pu tracer solution was directly stippled on each PLE and was allowed to equilibrate for 3 hours before removing the solution. The plutonium activity of each sample was measured by direct alpha counting to quantify the plutonium recovery by HDEHP PLE. The alpha spectra from alpha spectroscopy are shown in Figure 3. 1:5, 1:10, and 1:20 PLEs had sharp peak with low tailing. 1:2 had an extremely long tail, which is a possible indication that a large amount of ligands caused the film to not form a smooth surface. Also, it can be noted that 1:2 ratio PLE surface was not as rigid as the other ratio PLEs and it was prone to scratching during sample handing. The resolution of alpha spectra was quantified by measuring Full Width at Half of the Maximum (FWHM) using Bortels equation. The tailing component of the peak was also measured along with FWHM. The peak resolutions and tailing measurements for 0.1M nitric solution samples are given in Table 1. The best resolution was achieved with 1:5 PLE and worst was given by 1:2 PLE. The plutonium recovery by HDEHP PLE was dependent on both nitric concentration and ligand to polymer ratio. 1:2 PLE consistently had the highest recovery followed by 1:5 as shown in Figure 4. It should be noted that 1:2 ratio PLEs consistently had long tailing and the ROI of the spectrum had to be increased to encompass total counts from the tracer. 1:10 and 1:20 PLEs had close to zero percent recovery in all nitric concentration except for 0.01M. The highest plutonium recovery was observed for 0.1M nitric acid. 1:5 PLE gave the best combination of alpha spectroscopy resolution and plutonium recovery. Radiography image of samples were generated to study the plutonium distribution on the PLE surface. Samples were placed on an imaging plate (Fujifilm BAS-TR 2025) for 24 hours and the plate was scanned using GE Typhoon FLA 7000 system. The radiography image in Figure 5 shows uneven distribution with hot spots along the edge and in the center of the samples. These hot spots may be the result of highly localized concentration of ligands or surface defects that were observed in SEM. This unevenness in distribution may cause inaccurate activity measurement by alpha spectroscopy due to a bias in the energy calibration. PLEs based on HDEHP have been evaluated. The concentration of ligand in polystyrene is critical in the performance of the PLE; both for extraction efficiency as well as for alpha spectrometry results. The optimal PLE using this ligand has a concentration of 1:5 ligand to polystyrene. Under laboratory conditions, this configuration can produce similar results to those obtained for DIPEX based PLEs from previous studies. The concentration is very important to the results obtained for this ligand. This PLE is a good candidate for use in later field studies. Our next report will detail the evaluation of PLEs utilizing crown ether ligands.

36 MATERIALS SCIENCE↗

Space Telescope Design to Directly Image the Habitable Zone of Alpha Centauri

The scientific interest in directly imaging and identifying Earth-like planets within the Habitable Zone (HZ) around nearby stars is driving the design of specialized direct imaging missions such as ACESAT, EXO-C, EXO-S and AFTA-C. The inner edge of Alpha Cen A&B Habitable Zone is found at exceptionally large angular separations of 0.7" and 0.4" respectively. This enables direct imaging of the system with a 0.3m class telescope. Contrast ratios on the order of 10(exp 10) are needed to image Earth-brightness planets. Low-resolution (5-band) spectra of all planets may allow establishing the presence and amount of an atmosphere. This star system configuration is optimal for a specialized small, and stable space telescope that can achieve high-contrast but has limited resolution. This paper describes an innovative instrument design and a mission concept based on a full Silicon Carbide off-axis telescope, which has a Phase Induced Amplitude Apodization coronagraph embedded in the telescope. This architecture maximizes stability and throughput. A Multi-Star Wave Front algorithm is implemented to drive a deformable mirror controlling simultaneously diffracted light from the on-axis and binary companion star. The instrument has a Focal Plane Occulter to reject starlight into a high precision pointing control camera. Finally we utilize a Orbital Differential Imaging (ODI) post-processing method that takes advantage of a highly stable environment (Earth-trailing orbit) and a continuous sequence of images spanning 2 years, to reduce the final noise floor in post processing to approximately 2e-11 levels, enabling high confidence and at least 90% completeness detections of Earth-like planets.

Low-resolution (5-band) spectra↗

Bi[NC{sub 5}H{sub 3}(CO{sub 2}){sub 2}](OH{sub 2}){sub x}F (x=1 and 2): New one-dimensional Bi-coordination materials-Reversible hydration and topotactic decomposition to {alpha}-Bi{sub 2}O{sub 3}

Two one-dimensional bismuth-coordination materials, Bi[NC{sub 5}H{sub 3}(CO{sub 2}){sub 2}](OH{sub 2}){sub x}F (x=1 and 2), have been synthesized by hydrothermal reactions using Bi{sub 2}O{sub 3}, 2,6-NC{sub 5}H{sub 3}(CO{sub 2}H){sub 2}, HF, and water at 180 Degree-Sign C. Structures of the two materials were determined by single-crystal X-ray diffraction. Although they have different crystal structures, both Bi-organic materials shared a common structural motif, a one-dimensional chain structure consisting of Bi{sup 3+} cations and pyridine dicarboxylate linkers. Detailed structural analyses include infrared spectroscopy, thermogravimetric analysis, and reversible hydration reactions for the coordinated water molecules were reported. Also, thermal decomposition of the rod-shaped Bi[NC{sub 5}H{sub 3}(CO{sub 2}){sub 2}](OH{sub 2})F single crystals at 800 Degree-Sign C led to {alpha}-Bi{sub 2}O{sub 3} that maintained the same morphology of the original crystals. - Graphical abstract: Calcination of the Bi[NC{sub 5}H{sub 3}(CO{sub 2}){sub 2}](OH{sub 2})F single crystals at 800 Degree-Sign C results in the {alpha}-Bi{sub 2}O{sub 3} rods that maintain the original morphology of the crystals. Highlights: Black-Right-Pointing-Pointer Synthesis of one-dimensional chain Bi-organic frameworks. Black-Right-Pointing-Pointer Reversible hydration reactions of Bi[NC{sub 5}H{sub 3}(CO{sub 2}){sub 2}](OH{sub 2})F. Black-Right-Pointing-Pointer Topotactic decomposition maintaining the same morphology of the original crystals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Later Outcomes and Alpha/Beta Estimate From Hypofractionated Conformal Three-Dimensional Radiotherapy Versus Standard Fractionation for Localized Prostate Cancer

Purpose: Now that the follow-up time has exceeded 5 years, an estimate of the {alpha}/{beta} ratio can be presented. The additional late outcomes in patients treated with three-dimensional conformal external beam radiotherapy for localized prostate cancer using a hypofractionated vs. a standard fractionation regimen are reported from this prospective nonrandomized contemporary comparison. Methods and Materials: A total of 114 nonrandomized patients chose hypofractionation delivered in 20 fractions of 3 Gy or 3.15 Gy (mean 3.06 Gy) for localized prostate cancer within a median overall time of 32 days (range, 29-49) using four fractions weekly. A total of 160 comparable patients were contemporarily treated within a median of 55 days (range 49-66). The median follow-up was 66 months (range, 24-95) for the hypofractionated arm and 63 months (range, 36-92) for the standard arm. The percentage of patients in the low-, medium-, and high-risk groups was 36%, 46%, and 18% in the hypofractionated arm and 44%, 50%, and 6% in standard arm (2 Gy), respectively. Results: The 5-year actuarial biochemical absence of disease (prostate-specific antigen nadir + 2 ng/mL) and disease-free survival rate was the same at 89% in both arms, making the {alpha}/{beta} calculation unambiguous. The point ratio of {alpha}/{beta} was 1.86 (95% confidence interval, 0.7-5.1 Gy). The 95% confidence interval was determined entirely by the binomial confidence limits in the numbers of patients. Rectal reactions of grade 3 and 4 occurred in 1 of 114 (hypofractionated) and 2 of 160 (standard) patients. Conclusions: The presented three-dimensional conformal regimen was acceptable, and the {alpha}/{beta} value was 1.8, in agreement with other very recent low meta-analyses (reviewed in the '' section).

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Effects of partial anion substitution on the thermoelectric properties of silver(I) chalcogenide halides in the system Ag{sub 5}Q{sub 2}X with Q=Te, Se and S and X=Br and Cl

A selection of mixed conducting silver chalcogenide halides of the general formula Ag{sub 5}Q{sub 2}X with Q=sulfur, selenium and tellurium and X=chlorine and bromine has been investigated due to their thermoelectric properties. Recently, the ternary counterpart Ag{sub 5}Te{sub 2}Cl showed a defined d{sup 10}-d{sup 10} interaction in the disordered cation substructure at elevated temperatures where Ag{sub 5}Te{sub 2}Cl is present in its high temperature {alpha}-phase. A significant drop of the thermal diffusivity has been observed during the {beta}-{alpha} phase transition reducing the values from 0.12 close to 0.08 mm{sup 2} s{sup -1}. At the same transition the thermopower reacts on the increasing silver mobility and jumps towards less negative values. Thermal conductivities, thermopower and thermal diffusivity of selected compounds with various grades of anion substitution in Ag{sub 5}Q{sub 2}X were determined around the silver-order/disorder {beta}-{alpha} phase transition. A formation of attractive interactions could be observed for selenium substituted phases while no effect was detected for bromide and sulfide samples. Depending on the grade and type of substitution the thermopower changes significantly at and after the {beta}-{alpha} phase transition. Thermal conductivities are low reaching values around 0.2-0.3 W m{sup -1} K{sup -1} at 299 K. Partial anion exchange can substantially tune the thermoelectric properties in Ag{sub 5}Q{sub 2}X phases. -- Graphical abstract: A structure section of the {alpha}-Ag{sub 5}Te{sub 2}Cl structure type and the thermopower evolution of Ag{sub 5}Te{sub 2}Cl{sub 0.4}Br{sub 0.6} undergoing a silver ion order/disorder phase transition. Display Omitted Research highlights: > We report on thermoelectric properties of silver(I) chalcogenide halides. > We examine thermopower, thermal diffusivity and thermal behavior. > Silver mobility, phase transitions and order/disorder phenomena are discussed. > Partial anion exchange can tune thermoelectric properties significantly.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High pressure study of low compressibility tetracalcium aluminum carbonate hydrates 3CaO{center_dot}Al{sub 2}O{sub 3}{center_dot}CaCO{sub 3}{center_dot}11H{sub 2}O

Synchrotron X-ray diffraction data was collected from a sample of monocarboaluminate 3CaO{center_dot}Al{sub 2}O{sub 3}{center_dot}CaCO{sub 3}{center_dot}11H{sub 2}O from ambient pressure to 4.3 GPa. The refined crystal structure at ambient pressure is triclinic with parameters a = 5.77(2) A, b = 8.47(5) A, c = 9.93(4) A, {alpha} = 64.6(2) Degree-Sign , {beta} = 82.8(3) Degree-Sign , {gamma} = 81.4(4) Degree-Sign , and space group of P1 or P1{sup Macron }. It showed some degree of perfectly reversible pressure-induced dehydration with a non-hygroscopic pressure-transmitting medium. However the dehydration effect does not critically affect a bulk modulus due to its strong framework. The isothermal bulk modulus of monocarboaluminate was found to be 53(5) GPa and 54(4) GPa with 3rd order and 2nd order Birch-Murnaghan Equation of state, respectively. That value is higher than for any other reported AFm or AFt phase. The pressure-volume behavior of the monocarboaluminate was compared with that of previous studied hemicarboaluminate.

36 MATERIALS SCIENCE↗

A high temperature superionic phase of CsSn{sub 2}F{sub 5}

The compound CsSn{sub 2}F{sub 5} has been investigated over the temperature range from ambient to 545 K using differential scanning calorimetry, impedance spectroscopy and neutron powder diffraction methods. A first-order phase transition is observed from DSC measurements at 510(2) K, to a phase possessing a high ionic conductivity ({sigma}{approx}2.5x10{sup -2} {Omega}{sup -1} cm{sup -1} at 520 K). The crystal structure of the high temperature superionic phase (labelled {alpha}) has been determined to be tetragonal (space group I4/mmm, a=4.2606(10) A, c=19.739(5) A and Z=2) in which the cations form layers perpendicular to the [001] direction, with a stacking sequence CsSnSnCsSnSn... All the anions are located in two partially occupied sites in the gap between the Cs and Sn layers, whilst the space between the Sn cations is empty, due to the orientation of the lone-pair electrons associated with the Sn{sup 2+}. The structure of {alpha}-CsSn{sub 2}F{sub 5} is discussed in relation to two other layered F{sup -} conducting superionic phases containing Sn{sup 2+} cations, {alpha}-RbSn{sub 2}F{sub 5} and {alpha}-PbSnF{sub 4} and, to facilitate this comparison, an improved structural characterisation of the former is also presented. The wider issue of the role of lone-pair cations such as Sn{sup 2+} in promoting dynamic disorder within an anion substructure is also briefly addressed. - Graphical abstract: CsSn{sub 2}F{sub 5} is shown to undergo a first order phase transition at 510(2) K to a superionic phase in which the specific electronic configuration of the Sn{sup 2+} plays a key role in promoting extensive disorder of the anions.

36 MATERIALS SCIENCE↗

Raised cerebrovascular resistance in idiopathic orthostatic intolerance: evidence for sympathetic vasoconstriction

Patients with idiopathic orthostatic intolerance (IOI) exhibit symptoms suggestive of cerebral hypoperfusion and an excessive decrease in cerebral blood flow associated with standing despite sustained systemic blood pressure. In 9 patients (8 women and 1 man aged 22 to 48 years) with IOI, we tested the hypothesis that volume loading (2000 cc normal saline) and alpha-adrenoreceptor agonism improve systemic hemodynamics and cerebral perfusion and that the decrease in cerebral blood flow with head-up tilt (HUT) could be attenuated by alpha-adrenoreceptor blockade with phentolamine. At 5 minutes of HUT, volume loading (-20+/-3.2 bpm) and phenylephrine (-18+/-3.4 bpm) significantly reduced upright heart rate compared with placebo; the effect was diminished at the end of HUT. Phentolamine substantially increased upright heart rate at 5 minutes (20+/-3.7 bpm) and at the end of HUT (14+/-5 bpm). With placebo, mean cerebral blood flow velocity decreased by 33+/-6% at the end of HUT. This decrease in cerebral blood flow with HUT was attenuated by all 3 interventions. We conclude that in patients with IOI, HUT causes a substantial decrease in cerebrovascular blood flow velocity. The decrease in blood flow velocity with HUT can be attenuated with interventions that improve systemic hemodynamics and therefore decrease reflex sympathetic activation. Moreover, alpha-adrenoreceptor blockade also blunts the decrease in cerebral blood flow with HUT but at the price of deteriorated systemic hemodynamics. These observations may suggest that in patients with IOI, excessive sympathetic activity contributes to the paradoxical decrease in cerebral blood flow with upright posture.

Non-NASA Center↗

Rocket observations of solar UV radiation during the eclipse of 7 March 1970.

Results of observations of the solar eclipse of Mar. 7, 1970, with photometers sensitive to narrow bands of radiation at Lyman-alpha (1216 A) and at 2600 A included in the payloads of four Nike Apache rockets flown before and during the eclipse. At the center of totality, the flux of Lyman-alpha from the solar corona is 0.15% of the flux from the unobscured sun. The flux at second contact is 0.64%; at third contact, two observations give 0.52 and 0.59%. The brightness of the chromosphere in Lyman-alpha decreases exponentially over the range from 5 to 30 arc-sec from the limb with a scale height of 3835 plus or minus 70 km. In addition to the coronal and chromospheric Lyman-alpha a diffuse source is found. This is restricted to within 20 deg of the earth's horizon and is nearly uniform in azimuth at 170 km, the flux is about 3% of that from the unobscured sun. The flux of Lyman-alpha during the eclipse is considered in relation to the observed variation in electron density. It is concluded that, in totality, the ionosphere near 80 km is not in equilibrium with the ionizing radiation and that the production rate for electrons is not negligible if the loss process is recombination; it is negligible if the loss process is attachment-like.

Smith, L. G.↗

A STARBURSTING PROTO-CLUSTER IN MAKING ASSOCIATED WITH A RADIO GALAXY AT z = 2.53 DISCOVERED BY H{alpha} IMAGING

We report a discovery of a proto-cluster in vigorous assembly and hosting strong star-forming activities, associated with a radio galaxy USS 1558-003 at z = 2.53, as traced by wide-field narrow-band H{alpha} imaging with MOIRCS on the Subaru Telescope. We find 68 H{alpha} emitters with dust-uncorrected star formation rates (SFRs) down to 8.6 M{sub Sun} yr{sup -1}. Their spatial distribution indicates that there are three prominent clumps of H{alpha} emitters: one surrounding the radio galaxy, the second located at {approx}1.5 Mpc away to the southwest, and the third located between the two. These contiguous three systems are very likely to merge together in the near future and may grow to a single more massive cluster at a later time. While most H{alpha} emitters reside in the 'blue cloud' on the color-magnitude diagram, some emitters have very red colors with J - K{sub s} > 1.38(AB). Interestingly, such red H{alpha} emitters are located toward the faint end of the red sequence, and they tend to be located in high density clumps. We do not see any statistically significant difference in the distributions of individual SFRs or stellar masses of the H{alpha} emitters between the dense clumps and the other regions, suggesting that this is one of the notable sites where the progenitors of massive galaxies in the present-day clusters were in their vigorous formation phase. Finally, we find that H{alpha} emission of the radio galaxy is fairly extended spatially over {approx}4.''5. However, it is not as widespread as its Ly{alpha} halo, meaning that the Ly{alpha} emission is indeed severely extended by resonant scattering.

79 ASTRONOMY AND ASTROPHYSICS↗

Explorations of new selenites of the group IIIA and IVA metals

Systematic explorations of new phases in the Ga{sup III}/In{sup III}/Ge{sup IV}-Se{sup IV}-O systems by hydrothermal syntheses or solid-state reactions at high-temperature led to six new ternary compounds, namely, M{sub 2}Se{sub 2}O{sub 7} (M=Ga 1, In 2), M(OH)(SeO{sub 3}) (M=Ga 3, In 4), {alpha}-Ge(SeO{sub 3}){sub 2}5 and {beta}-Ge(SeO{sub 3}){sub 2}6. Ga{sub 2}Se{sub 2}O{sub 7}1 displays a 3D open framework composed of 2D gallium oxide layers being further bridged and capped by SeO{sub 3} groups. In{sub 2}Se{sub 2}O{sub 7}2 features a 3D indium oxide framework formed by corner- and edge- sharing InO{sub 6} octahedra with SeO{sub 3} groups attached on the cavities and the 8-member ring tunnels of the structure. The isostructural of M(OH)(SeO{sub 3}) (M=Ga 3, In 4) exhibit a 2D metal selenite layer composed of 1D edge-sharing MO{sub 6} octahedral chains that are interconnected by SeO{sub 3} groups. {alpha}-Ge(SeO{sub 3}){sub 2} (P2{sub 1}/n) 5 displays a 3D open framework with 1D 8-member ring tunnels along the a-axis while {beta}-Ge(SeO{sub 3}){sub 2} (Pa-3) 6 exhibits a condensed 3D network. - Graphical abstract: Highlights: Black-Right-Pointing-Pointer Up to now, selenites of the group IIIA and IVA metals are still rare. Black-Right-Pointing-Pointer Hydrothermal or solid state reactions yielded six new compounds in this system. Black-Right-Pointing-Pointer They are M{sub 2}Se{sub 2}O{sub 7} (M=Ga, In), M(OH)(SeO{sub 3}) (M=Ga, In), {alpha}-Ge(SeO{sub 3}){sub 2} and {beta}-Ge(SeO{sub 3}){sub 2}. Black-Right-Pointing-Pointer They exhibit four different 3D and one 2D structural types. Black-Right-Pointing-Pointer {alpha}-Ge(SeO{sub 3}){sub 2} and {beta}-Ge(SeO{sub 3}){sub 2} represent the first examples of germanium selenites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Results of transonic wind tunnel tests on an 0.015-scale space shuttle mated vehicle model (67-ots) in the LaRC 8 foot TPT (IA41)

Wind tunnel tests were conducted to obtain aerodynamic force data for Mach numbers from 0.60 to 1.20. Data were obtained for an alpha range of -10 deg to +10 deg (beta = 0 deg beta = 5 deg) and beta range of -10 deg to +10 deg (alpha = 0 deg). Longitudinal and lateral-directional stability and control data were obtained for tank alone, tank plus SRB's, tank plus Orbiter, and mated configuration of tank + Orbiter + SRB's. Also, single-component rudder hinge moment data were obtained at rudder deflections of 0 and -20 deg for each Mach number tested. Plots of aerodynamic coefficients vs. Mach number are presented, using data from both test IA41 and tests LRC-UPWT-1056, 1073 (IA42A/B) for Mach numbers of 1.60 to 4.63. The model tested in IA42A/B was the same model as tested in IA41.

Hardin, R.↗

Fe(II) adsorption on hematite (0 0 0 1)

The surface structure of {alpha}-Fe{sub 2}O{sub 3}(0 0 0 1) was studied using crystal truncation rod (CTR) X-ray diffraction before and after reaction with aqueous Fe(II) at pH 5. The CTR results show the unreacted {alpha}-Fe{sub 2}O{sub 3}(0 0 0 1) surface consists of two chemically distinct structural domains: an O-layer terminated domain and a hydroxylated Fe-layer terminated domain. After exposing the {alpha}-Fe{sub 2}O{sub 3}(0 0 0 1) surface to aqueous Fe(II), the surface structure of both co-existing structural domains was modified due to adsorption of Fe at crystallographic lattice sites of the substrate, resulting in six-coordinated adsorbed Fe at the surface. The average Fe-O bond lengths of the adsorbed Fe are consistent with typical Fe(III)-O bond lengths (in octahedral coordination), providing evidence for the oxidation of Fe(II) to Fe(III) upon adsorption. These results highlight the important role of substrate surface structure in controlling Fe(II) adsorption. Furthermore, the molecular scale structural characterization of adsorbed Fe provides insight into the process of Fe(II) induced structural modification of hematite surfaces, which in turn aids in assessing the effective reactivity of hematite surfaces in Fe(II) rich environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Properties of the local Interstellar Medium and the Interaction of the Stellar Winds of epsilon Indi and lambda Andromedae with the Interstellar Environment

We present new observations of the Ly alpha lines of Epsilon Indi (K5 5) and A Andromedae (G8 4-3 + ?) These data were obtained by the Goddard High Resolution Spectrograph (GHRS) on the Hubble Space Telescope. Analysis of the interstellar H 1 and D 1 absorption lines reveals that the velocities and temperatures inferred from the H 1 lines are inconsistent with the parameters inferred from the D 1 lines, unless the H 1 absorption is assumed to be produced by two absorption components. One absorption component is produced by interstellar material. For both lines of sight observed, the velocity of this component is consistent with the velocity predicted by the local flow vector. For the Epsilon Indi data, the large velocity separation between the stellar emission and the interstellar absorption allows us to measure the H 1 column density independent of the shape of the intrinsic stellar Ly alpha profile. This approach permits us to quote an accurate column density and to assess its uncertainty with far more confidence than in previous analyses, for which the errors were dominated by uncertainties in the assumed stellar profiles.

Wood, Brian E.↗

Stereoselective Synthesis of [alpha, alpha][superscript ']-Biprolines

A means to induce dehydrodimerization of Seebach's oxazolidinone (5), the stereochemical outcome of which is entirely temperature dependent, is described. The resultant dimers 3 and 4 are precursors to (R,R)-alpha,alpha'-biproline (1) and meso-alpha,alpha'-biproline (2), respectively. An organohypobromite and an iminium halide are proposed to serve as electrophiles in the reaction with the enolate of 5 to give 3 and 4, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of milling time on magnetic properties and structures of bulk Sm-Co/{alpha}-(Fe, Co) nanocomposite magnets

Bulk Sm-Co/{alpha}-(Fe,Co) nanocomposite magnets were fabricated by hot pressing composite powders prepared by high-energy ball milling of magnetically hard SmCo{sub 5} powder and magnetically soft Fe powder. The bulk magnets had a nanocomposite structure consisting of Sm-Co matrix (1:5 H and 1:7 H phases) and {alpha}-(Fe,Co) phases. The Fe-Co particles were distributed uniformly in the Sm-Co matrix. The milling time strongly affects the structures and the magnetic properties of the bulk magnets. Increasing milling time led to a decrease of the amount of 1:5 H phase, an increase in the phase fraction of the 1:7 H phase, and a decrease in the amount of soft phase, which resulted in an increase in magnetization and a decrease in coercivity. Scanning electron microscopy (SEM)/energy dispersive spectroscopy (EDS) analyses revealed that inter-diffusion took place between the Sm-Co matrix and Fe particles during the processing.

36 MATERIALS SCIENCE↗

High power heating of magnetic reconnection in merging tokamak experiments

Significant ion/electron heating of magnetic reconnection up to 1.2 keV was documented in two spherical tokamak plasma merging experiment on MAST with the significantly large Reynolds number R∼10{sup 5}. Measured 1D/2D contours of ion and electron temperatures reveal clearly energy-conversion mechanisms of magnetic reconnection: huge outflow heating of ions in the downstream and localized heating of electrons at the X-point. Ions are accelerated up to the order of poloidal Alfven speed in the reconnection outflow region and are thermalized by fast shock-like density pileups formed in the downstreams, in agreement with recent solar satellite observations and PIC simulation results. The magnetic reconnection efficiently converts the reconnecting (poloidal) magnetic energy mostly into ion thermal energy through the outflow, causing the reconnection heating energy proportional to square of the reconnecting (poloidal) magnetic field B{sub rec}{sup 2} ∼ B{sub p}{sup 2}. The guide toroidal field B{sub t} does not affect the bulk heating of ions and electrons, probably because the reconnection/outflow speeds are determined mostly by the external driven inflow by the help of another fast reconnection mechanism: intermittent sheet ejection. The localized electron heating at the X-point increases sharply with the guide toroidal field B{sub t}, probably because the toroidal field increases electron confinement and acceleration length along the X-line. 2D measurements of magnetic field and temperatures in the TS-3 tokamak merging experiment also reveal the detailed reconnection heating mechanisms mentioned above. The high-power heating of tokamak merging is useful not only for laboratory study of reconnection but also for economical startup and heating of tokamak plasmas. The MAST/TS-3 tokamak merging with B{sub p} > 0.4 T will enables us to heat the plasma to the alpha heating regime: T{sub i} > 5 keV without using any additional heating facility.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Large time scale variation in hydrogen emission from Jupiter and Saturn

The IUE and Voyager spacecraft observations of Jupiter and Saturn were combined to obtain a consistent measurement of temporal variation of the equatorial subsolar hydrogen emission. The outer planets appear to have rather independent behavior over time scales of the order of 10 yr, particularly in emission from the H Ly alpha line. The time interval from 1978 to the present shows variation of mean equatorial H Ly alpha brightness of 2 at Jupiter and 5 at Saturn. The relative magnitudes of the variations is sufficiently different to suggest that response to input from the Sun is at least nonlinear. The brightness of H2 band emission appears to be relatively more stable than H Ly alpha. There is evidence in IUE observations of a moderate increase in H2 band brightness with increasing time at Jupiter, in opposition to the variation in H Ly alpha.

Shemansky, D. E.↗