Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ARROW”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Crystal structure and electron density in the apatite-type ionic conductor La{sub 9.71}(Si{sub 5.81}Mg{sub 0.18})O{sub 26.37}

Crystal structure and electron density in the apatite-type ionic conductor La{sub 9.71}(Si{sub 5.81}Mg{sub 0.18})O{sub 26.37} have been investigated at 302, 674 and 1010 K by Rietveld refinement and a whole-pattern fitting approach based on the maximum-entropy method (MEM) using synchrotron X-ray powder diffraction data. Second harmonic generation measurements indicated that the space group of this material is centrosymmetric. Among the possible hexagonal groups P6{sub 3}/m, P6{sub 3} and P3-bar the former is correct for La{sub 9.71}(Si{sub 5.81}Mg{sub 0.18})O{sub 26.37}. Rietveld refinements suggested an oxygen interstitial site (0.03,0.15,0.85) near the hexagonal axis. MEM analyses revealed that the Si{sub 0.97}Mg{sub 0.03} atom has covalent bonds with four adjacent oxygen atoms to form a tetrahedron. The oxygen O4 atom located at the 2a site (0.0,0.0,1/4) exhibited large atomic displacement parameters along the c axis and electron density mapping also indicated the wide distribution consistent with migration of oxygen ions in this direction. - Graphical abstract: Equielectron density surfaces at 1.0 A{sup -3} of apatite-type La{sub 9.71}(Si{sub 5.81}Mg{sub 0.18})O{sub 26.37} at 302 K. O4 atoms have large distribution along the <001> direction (white arrows).

36 MATERIALS SCIENCE↗

Crystal structure and magnetic properties of Li,Cr-containing molybdates Li{sub 3}Cr(MoO{sub 4}){sub 3}, LiCr(MoO{sub 4}){sub 2} and Li{sub 1.8}Cr{sub 1.2}(MoO{sub 4}){sub 3}

Single crystals of LiCr(MoO{sub 4}){sub 2}, Li{sub 3}Cr(MoO{sub 4}){sub 3} and Li{sub 1.8}Cr{sub 1.2}(MoO{sub 4}){sub 3} were grown by a flux method during the phase study of the Li{sub 2}MoO{sub 4}-Cr{sub 2}(MoO{sub 4}){sub 3} system at 1023 K. LiCr(MoO{sub 4}){sub 2} and Li{sub 3}Cr(MoO{sub 4}){sub 3} single phases were synthesized by solid-state reactions. Li{sub 3}Cr(MoO{sub 4}){sub 3} adopts the same structure type as Li{sub 3}In(MoO{sub 4}){sub 3} despite the difference in ionic radii of Cr{sup 3+} and In{sup 3+} for octahedral coordination. Li{sub 3}Cr(MoO{sub 4}){sub 3} is paramagnetic down to 7 K and shows a weak ferromagnetic component below this temperature. LiCr(MoO{sub 4}){sub 2} is isostructural with LiAl(MoO{sub 4}){sub 2} and orders antiferromagnetically below 20 K. The magnetic structure of LiCr(MoO{sub 4}){sub 2} was determined from low-temperature neutron diffraction and is based on the propagation vektor k{sup -}>=(1/2 ,1/2 ,0). The ordered magnetic moments were refined to 2.3(1) mu{sub B} per Cr-ion with an easy axis close to the [1 1 1-bar] direction. A magnetic moment of 4.37(3) mu{sub B} per Cr-ion was calculated from the Curie constant for the paramagnetic region. The crystal structures of the hitherto unknown Li{sub 1.8}Cr{sub 1.2}(MoO{sub 4}){sub 3} and LiCr(MoO{sub 4}){sub 2} are compared and reveal a high degree of similarity: In both structures MoO{sub 4}-tetrahedra are isolated from each other and connected with CrO{sub 6} and LiO{sub 5} via corners. In both modifications there are Cr{sub 2}O{sub 10} fragments of edge-sharing CrO{sub 6}-octahedra. - Graphical abstract: Magnetic structure of LiCr(MoO{sub 4}){sub 2}. The orientation of the magnetic moments of Cr{sup 3+} are shown by arrows.

36 MATERIALS SCIENCE↗

Crystal structure and physical properties of the novel ternary intermetallics URuSi{sub 3-x} and U{sub 3}Ru{sub 2}Si{sub 7}

Two novel ternary intermediate phases, namely URuSi{sub 3-x} (x=0.11) and U{sub 3}Ru{sub 2}Si{sub 7} were found in the Si-rich part of the U-Ru-Si phase diagram. Single crystal X-ray diffraction measurements, carried out at room temperature, indicated that URuSi{sub 3-x} crystallizes in its own tetragonal type structure (space group P4/nmm, no. 129; unit cell parameters: a=12.108(1) A and c=9.810(1) A), being a derivative of the BaNiSn{sub 3}-type structure. U{sub 3}Ru{sub 2}Si{sub 7} adopts in turn a disordered orthorhombic La{sub 3}Co{sub 2}Sn{sub 7}-type structure (space group Cmmm, no. 65; unit cell parameters: a=4.063(1) A, b=24.972(2) A and c=4.072(1) A). As revealed by magnetization, electrical resistivity and specific heat measurements, both compounds order magnetically at low temperatures. Namely URuSi{sub 3-x} is a ferromagnet with T{sub C}=45 K, and U{sub 3}Ru{sub 2}Si{sub 7} shows ferrimagnetic behavior below T{sub C}=29 K. - Graphical abstract: Thermal dependence of the specific heat of the novel intermetallics URuSi{sub 3} and U{sub 3}Ru{sub 2}Si{sub 7}. The arrows mark temperatures of ferro- or ferrimagnetic phase transitions.

36 MATERIALS SCIENCE↗

Low-temperature structural phase transition in synthetic libethenite Cu{sub 2}PO{sub 4}OH

Low-temperature structural properties of the synthetic mineral libethenite Cu{sub 2}PO{sub 4}OH were investigated by single-crystal X-ray diffraction, synchrotron X-ray powder diffraction, specific heat measurements, and Raman spectroscopy. A second-order structural phase transition from the Pnnm symmetry (a=8.0553(8) A, b=8.3750(9) A, c=5.8818(6) A at 180 K) to the P2{sub 1}/n symmetry (a=8.0545(8) A, b=8.3622(9) A, c=5.8755(6) A, {beta}=90.0012(15) at 120 K) was found at 160 K during cooling. At 120 K, the monoclinic angle is 90.0012(15) from single crystal X-ray data vs 90.083(1) from powder X-ray diffraction data. The P2{sub 1}/n-to-Pnnm transition may be a general feature of the adamite-type compounds, M{sub 2}XO{sub 4}OH. - Graphical Abstract: Fragments of experimental synchrotron X-ray powder diffraction patterns of Cu{sub 2}PO{sub 4}OH between 100 and 280 K. Arrows show additional reflections that appear below 160 K in the monoclinic P2{sub 1}/n phase. Highlights: > A low-temperature phase transition was found in the mineral libethenite Cu{sub 2}PO{sub 4}OH. > No magnetic anomalies and weak specific heat anomalies are detected. > Phase transition is of the second order. > Libethenite may exemplify a general feature of the adamite-type compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermally induced structural changes in incommensurate calcium barium niobate Ca{sub 0.28}Ba{sub 0.72}Nb{sub 2}O{sub 6} (CBN28)

The incommensurately modulated crystal structure of relaxor ferroelectric CBN28 was refined at elevated temperatures up to 330 Degree-Sign C in the 3+2 dimensional superspace group P4bm({alpha}{alpha}1/2,-{alpha}{alpha}1/2). The structural modulations mainly consisting of cooperative tilting of NbO{sub 6} octahedra and an occupational modulation of the large cation site Me2 persist beyond the diffuse ferroelectric transition with slightly reduced amplitudes. A change of symmetry was not observed. Both symmetrically non-equivalent NbO{sub 6} octahedra are distorted by off center shifts of the Nb atoms in the same direction along the tetragonal c-axis. The displacements of the Nb atoms are gradually reduced with increasing temperatures until one of the Nb atoms crosses the center of its coordination polyhedron near the transition temperature T{sub M} adopting an uncompensated anti-ferroelectric configuration. This change is accompanied by enhanced thermal motions of the Nb atoms along the c-axis. Structural distortions and electric polarization do not completely vanish at T{sub M} but may persist in fluctuating polar nanodomains. - Graphical abstract: Cross-over of the off-center shifts of both symmetrically non-equivalent niobium atoms from parallel to anti-parallel configuration in the incommensurately modulated crystal structure of relaxor ferroelectric Ca{sub 0.28}Ba{sub 0.72}Nb{sub 2}O{sub 6} (CBN28) at elevated temperatures (left side). The arrows point to columns of octahedra containing Nb1. The remaining octahedra are occupied by Nb2 atoms. Highlights: Black-Right-Pointing-Pointer The incommensurate structure of relaxor ferroelectric CBN28 was refined at high temperatures. Black-Right-Pointing-Pointer The modulations consist of a wave-like occupation of cation sites and displacements of the O atoms. Black-Right-Pointing-Pointer The modulations survive the ferroelectric phase transition and no change of symmetry was found. Black-Right-Pointing-Pointer Atomic shifts of the ions and the corresponding electric polarization do not completely vanish. Black-Right-Pointing-Pointer Thermal motions lead to a cross-over from parallel to anti-parallel configuration of Nb atoms.

36 MATERIALS SCIENCE↗

Crystal and magnetic structure of (1−x)BiFeO{sub 3}–xSrTiO{sub 3} (x=0.2, 0.3, 0.4 and 0.8)

The effect of doping SrTiO{sub 3} into BiFeO{sub 3} on the magnetic and crystal structure has been explored using powder neutron diffraction for (1−x)BiFeO{sub 3}–xSrTiO{sub 3} where x=0.2, 0.3, 0.4, 0.6 and 0.8. While the data are not sensitive to the cycloidal component of the magnetic ordering, the evolution of the collinear antiferromagnetic moment of the G-type antiferromagnetic component with T and x has been explored, as have structural parameters. It is found that for x≤0.4 pure phase samples form in the R3c cell, and for x=0.8 a non-magnetic Pm3{sup ¯}m phase is obtained. The x=0.6 sample gives a mixed phase. Through the R3c phase the magnetic structure does not change appreciably apart from the reduction of magnetic moment magnitude with the increasing T and/or x. - Graphical abstract: A simple phase diagram for (1−x)BiFeO{sub 3}–xSrTiO{sub 3} , where hexagons indicate the rhombohedral R3c phase and boxes the cubic phase. Filled symbols indicate magnetic ordering. The black arrow indicates T{sub N} for BiFeO{sub 3}. Display Omitted - Highlights: • We have established part of the phase diagram for doping SrTiO{sub 3} into BiFeO{sub 3}. • (1−x)BiFeO{sub 3}–xSrTiO{sub 3} is isostructural with BiFeO{sub 3} up to x<0.4, and cubic for x>0.85. • We have examined the evolution of ordered magnetic moment with T and x.

36 MATERIALS SCIENCE↗

Structure and physical properties of RT{sub 2}Cd{sub 20} (R=rare earth, T=Ni, Pd) compounds with the CeCr{sub 2}Al{sub 20}-type structure

Eleven new compounds, R Ni{sub 2}Cd{sub 20} (R=Y, La–Nd, Sm, Gd, Tb) and R Pd{sub 2}Cd{sub 20} (R=Ce, Pr, Sm), were grown as single crystals in high temperature cadmium-rich solutions. They crystallize in the cubic CeCr{sub 2}Al{sub 20}-type structure (Fd3{sup ¯}m, Z=8) as characterized by measurements of powder X-ray diffraction. Electrical resistivity, magnetization, and specific heat measurements were performed on R Ni{sub 2}Cd{sub 20} (R=Y, La–Nd, Sm, Gd, Tb) single crystals. Whereas YNi{sub 2}Cd{sub 20} and LaNi{sub 2}Cd{sub 20} exhibit unremarkable metallic behavior, when magnetic moments from localized 4f electron states (Gd{sup 3+}–Tb{sup 3+}) are embedded into this host, they exhibit ferromagnetic order with values of the Curie temperature T{sub C} for R Ni{sub 2}Cd{sub 20} (R=Gd, and Tb) which scale with the de Gennes factor. - Graphical abstract: Specific heat divided by temperature C/T vs. T for single crystals of R Ni{sub 2}Cd{sub 20} (R=Y, La–Nd, Gd, and Tb). Left inset: Low temperature C/T vs. T{sup 2} for LaNi{sub 2}Cd{sub 20}. The solid line represents a linear fit of the data. Right inset: Low-temperature C/T data vs. T for R=Ce–Nd, Gd, and Tb; magnetic ordering temperatures are indicated by arrows. - Highlights: • R Ni{sub 2}Cd{sub 20} (R=Y, La–Nd, Sm, Gd, Tb) single crystals synthesized for the first time. • R Pd{sub 2}Cd{sub 20} (R=Ce, Pr, Sm) single crystals synthesized for the first time. • Single crystals are of good metallurgical quality (large RRR values). • NdNi{sub 2}Cd{sub 20} orders antiferromagnetically at T{sub N}=1.5 K. • R Ni{sub 2}Cd{sub 20} (R=Sm, Gd, Tb) order ferromagnetically.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Magnetic and structural investigations on La{sub 0.6}Sr{sub 0.4}MnO{sub 3} nanostructured manganite: Evidence of a ferrimagnetic shell

This paper presents the structural and magnetic properties of La{sub 0.6}Sr{sub 0.4}MnO{sub 3} nanoparticles with sizes from 21 to 106 nm, which have been prepared using the sol–gel method. The reduction of the nanoparticles' size tends to broaden the paramagnetic to ferromagnetic transition, as well as to promote magnetic hysteresis and a remarkable change on the magnetic saturation. In order to better understand the magnetic behavior of those nanoparticles, a simple model based on a ferromagnetic core and a ferrimagnetic shell was considered, where the magnetization was described in terms of the standard mean-field Brillouin function. This model matches the experimental data, leading to conclusion the nanoparticles with size <40nm are single magnetic domain. In addition, the output fitting parameters give information on the Landé factor of the core and shell. - Graphical abstract: Core–shell model: The core has a ferromagnetic character, while the shell is ferrimagnetic. Each one has two sub-lattices (Mn{sup 3+} and Mn{sup 4+}) that interact through a mean-field (see Eq. (6)). Interactions strength and signals are also represented in this figure. In this figure the arrows (or vectors) represent the magnetic moment of ions Mn{sup 3+} (s=2) and Mn{sup 4+} (s=3/2). βλ's describe the ferromagnetic interaction between Mn{sup 4+} ions into the core (βλ{sub co}) and into the shell (βλ{sub sh}), while αλ's represent ferromagnetic interaction between Mn{sup 3+} ions into the core (αλ{sub co}) and into the shell (αλ{sub sh}). The −λ{sub sh} and +λ{sub co}co are associated to the mean field parameter of interaction between Mn{sup 3+} and Mn{sup 4+} sub-lattices in the shell (ferrimagnetic, negative sign) and core (ferromagnetic, positive sign), respectively. - Highlights: • Evidences of ferromagnetic shell in La{sub 0.6}Sr{sub 0.4}MnO{sub 3} ferromagnetic nanoparticles. • Core(ferromagnetic)–shell(ferromagnetic) model for nanostructured manganite. • Sol–gel method was successfully used to obtain nanostructured manganite.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Transmission electron microscopy study of the MgS–Tm{sub 2}S{sub 3} system

This work presents the structural–microstructural characterization of the NaCl-derivative MgS–Tm{sub 2}S{sub 3} system, which can be formulated by the expression Mg{sub (1−x)}Tm{sub (2/3)x}□{sub (1/3)x}S (□→cation vacancy). Transmission electron microscopy observations show the transition between NaCl-type and spinel-type structures when 0 ≤x≤ 0.75. The increase of Tm content in the solid solution provokes the increase of the spinel-type phase proportion, which intergrows with the NaCl-type crystals. When x≥0.75, some phases derived from NaCl-type structure through the chemical twinning at the unit cell level crystallographic operation are observed, such as CT-MgTm{sub 2}S{sub 4} and CT-MgTm{sub 4}S{sub 7}. The existence and nature of the extended defects observed along the c direction of these structures are characterized by means of Scanning-Transmission electron microscopy high-angle dark field imaging, which allows observing the presence of quasi ordered crystals with new possible complex stoichiometries at atomic resolution. - Graphical abstract: HAADF-STEM image of a disordered CT-MgYb{sub 2}S{sub 4} crystal. The disordered twin-slab sequences are marked by arrows. - Highlights: • Structural evolution of the Mg{sub (1−x)}Tm{sub (2/3)x}□{sub (1/3)x}S system was characterized by means of TEM. • The increase in Tm content provokes the transition from NaCl to spinel-type structure up to x=0.75. • Chemical twinned phases CT-MgTm{sub 2}S{sub 4} and CT-MgTm{sub 4}S{sub 7} are observed at high Tm contents. • Extended defects in CT-crystals are characterized with atomic resolution STEM-HAADF images.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Stabilization of scandium rich spinel ferrite CoFe{sub 2−x}Sc{sub x}O{sub 4} (x≤1) in thin films

Scandium rich cobalt ferrites Co{sub y}Fe{sub 3−x−y}Sc{sub x}O{sub 4} with y~1 never obtained in bulk could be stabilized in pulsed laser deposited thin films. Scandium contents of up to x=1 are reached. The cell parameter increases versus x as awaited when considering the size of scandium. It is equal to 0.8620 nm for x=1, significantly higher than that of CoFe{sub 2}O{sub 4} (0.8396 nm). The lattice mismatch between the MgO (100) substrate and the scandium-containing spinel leads to an increased roughness. Cobalt is displaced from the octahedral site by Sc and mainly occupies the tetrahedral sites for high x values. - Graphical abstract: Magnification of the XRD patterns recorded on thin films of CoFe{sub 2-x}Sc{sub x}O{sub 4} for x=0, 0.45, 1 and 1.2, the arrows denote the (004) and (008) diffraction lines of the spinel phase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

HT-solution growth and characterisation of In{sub x}Na{sub x}Mn{sub 1-2x}WO{sub 4} (0<x≤0.26)

A new solid solution system, In{sub x}Na{sub x}Mn{sub 1–2x}WO{sub 4} (0<x=≤0.26) belonging to the MnWO{sub 4}-type multiferroics was investigated. Large single crystals were grown up to several mm in length from high-temperature oxide solutions using a solvent mixture of Na{sub 2}WO{sub 4} and Na{sub 2}W{sub 2}O{sub 7}. Quantitative doping degrees were analyzed by means of electron microprobe. Single crystal X-ray diffraction studies agreed with the polar space group P2 for In{sub x}Na{sub x}Mn{sub 1–2x}WO{sub 4}. The complexity of partial (Na{sup +}/Mn{sup 2+})- and (In{sup 3+}/Mn{sup 2+})-ordering makes their atomic sites unique, explaining the dissymmetrization from P2/c down to P2. This is also valid for the InNaW{sub 2}O{sub 8}-type Mn{sub 2y}In{sub 1-y}Na{sub 1-y}W{sub 2}O{sub 8} solid solution found as co-product in this study. Specific heat and magnetisation measurements showed a paramagnetic dilution effect from (In{sup 3+}/Na{sup +})-doping while lowering the transition temperature for the multiferroic phase AF2 of In{sub x}Na{sub x}Mn{sub 1–2x}WO{sub 4} with respect to the prototype MnWO{sub 4}. - Graphical abstract: A volume expansion around Mn2 site by (In, Na)-doping is drawn by the atomic shifts in a Mn2O{sub 6} octahedron in the atomistic structure of In{sub 0.20(2)}Na{sub 0.17(2)}Mn{sub 0.63(4)}WO{sub 4} from the respective atomic positions of In-free MnWO{sub 4}. The size and direction of arrows are scaled up for indicating the consequent local distortion. - Highlights: • HT solution crystal growth of (In, Na):MnWO{sub 4}-solid-solution compounds. • Polar space group symmetry P2 for their atomistic structures. • Magnetic properties of the multiferroic phase AF2 by (In{sup 3+}, Na{sup +})-doping. • Magnetic phase transitions.

36 MATERIALS SCIENCE↗

Charge ordering and multiferroicity in Fe{sub 3}BO{sub 5} and Fe{sub 2}MnBO{sub 5} oxyborates

The comparison of Fe{sub 3}BO{sub 5} and Fe{sub 2}MnBO{sub 5} reveals that the 2Fe{sup 2+}: Fe{sup 3+} charge ordering of the former is suppressed in the latter. Spin dynamics probed by ac susceptibility are strongly affected by the substitution, inducing superparamagnetism at low temperature in Fe{sub 2}MnBO{sub 5}. Interestingly, for both oxyborates, glassiness is observed in the dielectric properties at low temperature, but only Fe{sub 3}BO{sub 5} shows a magnetodielectric effect close to its lower magnetic transition. A change in the electrical polarization, measured by pyroelectric current integration, is observed in Fe{sub 3}BO{sub 5} and is even more pronounced in Fe{sub 2}MnBO{sub 5}. Such results suggest that these oxyborates behave like antiferromagnetic relaxor ferroelectrics. These features are proposed to be related to the distribution of the species (Fe{sup 3+}, Fe{sup 2+} and Mn{sup 2+}) over the four transition metal sites forming the ludwigite structure. - Graphical abstract: 90 K [010] electron diffraction patterns of Fe{sub 3}BO{sub 5}. The yellow arrows in the pattern indicate the extra-spots corresponding to the superstructure induced by the charge ordering. - Highlights: • The TEM (ED) study of the Fe{sub 3}BO{sub 5} oxyborate at 90 K reveals a superstructure related to a Fe{sup 2+}/Fe{sup 3+} ordering. • The Fe{sub 2}MnBO{sub 5}, Mn-substituted counterpart, does not show such ordering. • Our magnetic and electric measurements demonstrate that these magnetic ferrites exhibit glassiness in their charges (relaxor-type) with additional superparamagnetism at low T for Fe{sub 2}MnBO{sub 5} and magnetodielectric coupling near T{sub N2}=72 K in Fe{sub 3}BO{sub 5}. • The pyroelectric measurements confirm the existence of a ferroelectric behavior in these antiferromagnets. Accordingly, our results open the route to the study of other large class of the M{sub 2}{sup 2+}M’{sup 3+}BO{sub 5} ludwigites and to their complex magnetism and its relationship to relaxor ferroelectricity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microstructure and nanohardness distribution in a polycrystalline Zn deformed by high strain rate impact

Polycrystalline Zn with an average grain size of about 300 {mu}m was deformed by direct impact Hopkinson pressure bar at a velocity of 29 m/s. An inhomogeneous grain structure was found consisting of a center region having large average grain size of 20 {mu}m surrounded by a fine-grained rim with an average grain size of 6 {mu}m. Transmission electron microscopy investigations showed a significant dislocation density in the large-grained area while in the fine-grained rim the dislocation density was negligible. Most probably, the higher strain yielded recrystallization in the outer ring while in the center only recovery occurred. The hardening effect of dislocations overwhelms the smaller grain size strengthening in the center part resulting in higher nanohardness in this region than in the outer ring. - Graphical Abstract: (a): EBSD micrograph showing the initial microstructure of polycrystalline Zn that was subsequently submitted to high strain rate impact. (b): an inhomogeneous grain size refinement was obtained which consists of a central coarse-grained area, surrounded by a fine-grained recrystallized rim. The black arrow points to the disc center. Research Highlights: {yields} A polycrystalline Zn specimen was submitted to high strain rate impact loading. {yields} Inhomogeneous grain refinement occurred due to strain gradient in impacted sample. {yields} A fine-grained recrystallized rim surrounded the coarse-grained center of specimen. {yields} The coarse-grained center exhibited higher hardness than the fine-grained rim. {yields} The higher hardness of the center was caused by the higher dislocation density.

36 MATERIALS SCIENCE↗

Template synthesis and characterization of molybdenum disulfide nanotubules

Graphical abstract: The image is a SEM image of branched MoS{sub 2} nanotubes, which are prepared in AAO templates. It is obvious to observe the branch of MoS{sub 2} nanotubes (labeled by arrows), and it reflects the microcosmic morphologies of pores in templates. Highlights: {yields} Large quantities of hollow MoS2 tubules. {yields} Explanation for the formation of branched shape. {yields} Explanation for the morphology of bamboo-like structure. -- Abstract: Molybdenum disulfide nanotubules were prepared by thermal decomposition of ammonium thiomolybdate ((NH{sub 4}){sub 2}MoS{sub 4}) precursors on anodized aluminum oxide template. Large quantities of hollow MoS{sub 2} nanotubules with the bamboo-like structure were obtained. The morphology and structures of MoS{sub 2} tubules were characterized by scanning electron microscopy, high-resolution transmission electron microscopy, energy dispersive spectroscopy, electron diffraction and optical absorption spectroscopy. MoS{sub 2} nanotubules completely reflected the three-dimensional structure of nanopores in template. The properties of Mo-S chemical bonds in lattice structure and the wetting state between porous surface and precursor have a great effect on the formation of sections in nanotubules, the ridges in the nanopores also play a very special role of this formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nuclear Data Sheets for A = 187

Evaluated spectroscopic data and level schemes from radioactive decay and nuclear reaction studies are presented for {sup 187}Hf, {sup 187}Ta, {sup 187}W, {sup 187}Re, {sup 187}Os, {sup 187}Ir, {sup 187}Pt, {sup 187}Au, {sup 187}Hg, {sup 187}Tl, {sup 187}Pb, {sup 187}Bi, and {sup 187}Po. This evaluation for A = 187 supersedes the earlier one by R.B. Firestone (1991Fi02) published in Nuclear Data Sheets 62, 159 (1991) and the {sup 187}Tl evaluation by C.M. Baglin (1999Ba24) published in Nuclear Data Sheets 86, 487 (1999). Highlights of this publication are the following: This evaluation includes first identifications of {sup 187}Hf, {sup 187}Ta (1999Be63, 2000PoZY) and {sup 187}Po (2006An11) nuclides. A B(E2){up_arrow} = 0.080 12 was determined by 1967Bi10 for the 9/2+ state at 845 keV in {sup 187}Re Coulomb Excitation. Using this B(E2) value and the adopted 845{gamma} ray properties, a T{sub 1/2}=54 fs 34 can be deduced for the 845 keV level of {sup 187}Re. This T{sub 1/2} yields a large B(E2)(W.u.){approx}1.3x105 for the 263{gamma} (depopulating the same level) indicating either substantial unobserved feeding or incorrect g-ray branching intensities of this level. The decay of g.s. and isomer of {sup 187}Tl are poorly known (please see {sup 187}Tl {epsilon} decay (51 s+15.60 s)). Based on {sup 191}Po {alpha} decay studies, 2002An19 establishes a {sup 187}Pb isomeric level energy at 2(15) keV and assigns J{pi}=13/2+ for the {sup 187}Pb g.s. and J{pi}=3/2- for the isomeric state (inverse of the systematics of odd-mass Pb nuclei in this region). From {sup 187}Pb and {sup 187}Pb{sup m} mass measurements, 2005We11 determined the isomeric level energy at 33(13) keV.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Single Spin Asymmetry in Inclusive Hadron Production in pp Scattering from Collins Mechanism

We study the Collins mechanism contribution to the single transverse spin asymmetry in inclusive hadron production in pp scattering p{up_arrow}p {yields} {pi}X from the leading jet fragmentation. The azimuthal asymmetric distribution of hadron in the jet leads to a single spin asymmetry for the produced hadron in the Lab frame. The effect is evaluated in a transverse momentum dependent model that takes into account the transverse momentum dependence in the fragmentation process. We find the asymmetry is comparable in size to the experimental observation at RHIC at {radical}s = 200GeV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Sketching the pion's valence-quark generalised parton distribution

In order to learn effectively from measurements of generalised parton distributions (GPDs), it is desirable to compute them using a framework that can potentially connect empirical information with basic features of the Standard Model. We sketch an approach to such computations, based upon a rainbow-ladder (RL) truncation of QCD's Dyson-Schwinger equations and exemplified via the pion's valence dressed-quark GPD, H-pi(V)(chi, xi, t). Our analysis focuses primarily on xi = 0, although we also capitalise on the symmetry-preserving nature of the RL truncation by connecting H-pi(V)(chi, xi = +/- 1, t) with the pion's valence-quark parton distribution amplitude. We explain that the impulse-approximation used hitherto to define the pion's valence dressed-quark GPD is generally invalid owing to omission of contributions from the gluons which bind dressed-quarks into the pion. A simple correction enables us to identify a practicable improvement to the approximation for H(pi)(V)p(chi, 0, t), expressed as the Radon transform of a single amplitude. Therewith we obtain results for H pi V(chi, 0, t) and the associated impact-parameter dependent distribution, q(pi)(V)(chi, vertical bar(b) over right arrow (perpendicular to)vertical bar), which provide a qualitatively sound picture of the pion's dressed-quark structure at a hadronic scale. We evolve the distributions to a scale zeta = 2 GeV, so as to facilitate comparisons in future with results from experiment or other nonperturbative methods. (C) 2014 Published by Elsevier B. V. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/3.0/).

Mezrag, C.↗

Gas-phase ion-molecule interactions in a collision reaction cell with triple quadrupole-inductively coupled plasma mass spectrometry: Investigations with N 2 O as the reaction gas

Nitrous oxide (N 2 O) was used as a reaction gas to investigate the gas phase ion-molecule interactions using the Agilent 8900 QQQ-ICP-MS. A multi-element standard containing 45 elements with masses ranging from 9 to 208 u was measured in the presence and absence of N 2 O. The main product ion species observed were oxides and nitrides. Comparison of the N 2 O reaction results with similar measurements conducted with O 2 revealed that N 2 O was more effective at forming oxides in general: the elements Cd and Pb were shown to produce oxides with N 2 O where the reaction did not occur with O 2 . Nitrous oxide was also shown to produce a significant amount of nitride species in a few cases. The general reactivity was shown to be consistent with density functional theory (DFT)-predicted reaction enthalpies, such that all predicted exothermic reactions produced product ions at levels at least 1% of the unreacted ion. Our results show that reaction enthalpy is a reasonable predictor of reactivity with N2O on the timescales of the interactions in non-thermal ICP-MS/MS systems. Our work demonstrates the utility of two relatively new platforms (commercial elemental ICP-MS/MS and EMSL Arrows interface to the NWChem program suite), which allows for the study of a large number of elements within a short period. While DFT with the basis sets utilized here is not the most accurate computational method, it is also not computationally expensive and is shown to be suitable for predicting gas phase reactivity in the QQQ-ICP-MS for the majority of ions studied. Here, the ease and rapidity of data collection and DFT calculations has the potential to be very impactful for the identification of targeted reaction chemistries to be leveraged for analytical method development, such as for the inline separation of isobaric interferences from analytes of interest.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗