Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ACTIVATION ENERGY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Microinhomogeneities in Semi-Insulating Cd(Zn)Te

Here, we investigated the temperature dependences (TDs) in the range of 290-423 K for the Hall constant R H and the Hall carrier mobility μn (σ R H ) in semi-insulating Cd 0.9 Zn 0.1 Te:In (CZT) crystals. As-grown, CZT material has nonequilibrium distributions of native and impurity-related defects. Thus, before taking any measurements, the samples were kept inside the test chamber in the dark at 423 K to reach an equilibrium state at T <; 423 K. For all the tested samples, the R H TD could be described by two activation energies. At the transitional point, the TD of the carrier mobility also changes from “normal” at high temperatures to “exponential” at low temperatures. The latter is a result of the collective effect of drift barriers due to microinhomogeneity. Therefore, only the high-temperature activation energies can be assigned to the ionization energies of the compensated deep donors (ε D ). For different samples, the values for ε D 0 (at absolute zero) were found to be in the range of 0.50-0.78 eV, and the degree of donor compensation [D + ]/[D] is between 0.3 and 0.98. The low-temperature region, where there are strong effects of crystal microinhomogeneities, cannot be used to characterize the ionization energy of donors. Therefore, we describe the activation energy as ε 1 = ε D - αε b , where ε b is the drift barrier height found from the TD of the carrier mobility and α takes a value close to unity. Values of ε b for our studied samples lie within (0.05-0.35) eV.

36 MATERIALS SCIENCE↗

Precipitation in cold-rolled Al–Sc–Zr and Al–Mn–Sc–Zr alloys prepared by powder metallurgy

The effects of cold-rolling on thermal, mechanical and electrical properties, microstructure and recrystallization behaviour of the AlScZr and AlMnScZr alloys prepared by powder metallurgy were studied. The powder was produced by atomising in argon with 1% oxygen and then consolidated by hot extrusion at 350 °C. The electrical resistometry and microhardness together with differential scanning calorimetry measurements were compared with microstructure development observed by transmission and scanning electron microscopy, X-ray diffraction and electron backscatter diffraction. Fine (sub)grain structure developed and fine coherent Al{sub 3}Sc and/or Al{sub 3}(Sc,Zr) particles precipitated during extrusion at 350 °C in the alloys studied. Additional precipitation of the Al{sub 3}Sc and/or Al{sub 3}(Sc,Zr) particles and/or their coarsening was slightly facilitated by the previous cold rolling. The presence of Sc,Zr-containing particles has a significant antirecrystallization effect that prevents recrystallization at temperatures minimally up to 420 °C. The precipitation of the Al{sub 6}Mn- and/or Al{sub 6}(Mn,Fe) particles of a size ∼ 1.0 μm at subgrain boundaries has also an essential antirecrystallization effect and totally suppresses recrystallization during 32 h long annealing at 550 °C. The texture development of the alloys seems to be affected by high solid solution strengthening by Mn. The precipitation of the Mn-containing alloy is highly enhanced by a cold rolling. The apparent activation energy of the Al{sub 3}Sc particles formation and/or coarsening and that of the Al{sub 6}Mn and/or Al{sub 6}(Mn,Fe) particle precipitation in the powder and in the compacted alloys were determined. The cold deformation has no effect on the apparent activation energy values of the Al{sub 3}Sc-phase and the Al{sub 6}Mn-phase precipitation. - Highlights: • The Mn, Sc and Zr additions to Al totally suppresses recrystallization at 550 °C. • The Sc,Zr-containing particle precipitation is slightly facilitated by cold rolling. • The Mn-containing particle precipitation is highly enhanced by cold rolling. • Cold rolling has no effect on activation energy of the Al{sub 3}Sc and Al{sub 6}Mn precipitation. • The texture development is affected by high solid solution strengthening by Mn.

36 MATERIALS SCIENCE↗

Studies on the reduction kinetics of hematite iron ore pellets with noncoking coals for sponge iron plants

In the present investigation, fired pellets were made by mixing hematite iron ore fines of -100, -16+18, and -8+10 mesh size in different ratios and studies on their reduction kinetics in Lakhanpur, Orient OC-2 and Belpahar coals were carried out at temperatures ranging from 850{sup o}C to 1000{sup o}C with a view toward promoting the massive utilization of fines in ironmaking. The rate of reduction in all the fired iron ore pellets increased markedly with an increase in temperature up to 1000{sup o}C, and it was more intense in the first 30min. The values of activation energy, calculated from integral and differential approaches, for the reduction of fired pellets (prepared from iron ore fines of -100 mesh size) in coals were found to be in the range 131-148 and 130-181 kJ mol{sup -1} (for =0.2 to 0.8), indicating the process is controlled by a carbon gasification reaction. The addition of selected larger size particles in the matrix of -100 mesh size fines up to the extent studied decreased the activation energy and slightly increased the reduction rates of resultant fired pellets. In comparison to coal, the reduction of fired pellets in char was characterized by significantly lower reduction rates and higher activation energy.

01 COAL, LIGNITE, AND PEAT↗

Thermogravimetric analysis of biowastes during combustion

The combustion of sewage sludge (SS), animal manure (AM) and the organic fraction of municipal solid waste (OFMSW) was assessed and compared with that of a semianthracite coal (SC) and of a PET waste by thermogravimetric (TG) analysis. Differences were found in the TG curves obtained for the combustion of these materials accordingly to their respective proximate analysis. Non-isothermal thermogravimetric data were used to assess the kinetics of the combustion of these biowastes. The present paper reports on the application of the Vyazovkin model-free isoconversional method for the evaluation of the activation energy necessary for the combustion of these biowastes. The activation energy related to SS combustion (129.1 kJ/mol) was similar to that corresponding to AM (132.5 kJ/mol) while the OFMSW showed a higher value (159.3 kJ/mol). These values are quite higher than the one determined in the same way for the combustion of SC (49.2 kJ/mol) but lower than that for the combustion of a PET waste (165.6 kJ/mol).

09 BIOMASS FUELS↗

Atomic dynamics of metallic glass melts La 50 Ni 15 Al 35 and Ce 70 Cu 19 Al 11 studied by quasielastic neutron scattering

By employing quasielastic neutron scattering, we studied the atomic-scale relaxation dynamics and transport mechanism of La 50 Ni 15 Al 35 and Ce 70 Cu 19 Al 11 metallic glass melts in the temperature range of > 200K above their liquidus temperatures. The results show that both liquids exhibit stretched exponential relaxation and Arrhenius-type temperature dependence of the effective diffusion coefficient. The La 50 Ni 15 Al 35 melt exhibits an activation energy of 0.545 ± 0.008 eV and a stretching exponent ~0.77 to 0.86 in the studied temperature range; no change of activation energy, as suggested in previous reports, associated with liquid-liquid phase transition was observed. In contrast, the Ce 70 Cu 19 Al 11 melt exhibits larger diffusivity with a much smaller activation energy of 0.201±0.003eV and a smaller stretching exponent ~0.51 to 0.60, suggestive of more heterogeneous dynamics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Oxidation and alpha-case formation in Ti–6Al–2Sn–4Zr–2Mo alloy

Isothermal heat treatments in ambient air were performed on wrought Ti–6Al–2Sn–4Zr–2Mo (Ti-6242) material at 500, 593 and 700°C for times up to 500 h. In the presence of oxygen at elevated temperatures simultaneous reactions occurred in Ti-6242 alloy, which resulted in the formation of an oxide scale and a layer with higher oxygen concentration (termed as alpha-case). Total weight gain analysis showed that there was a transition in the oxidation kinetics. At 500°C, the oxidation kinetics obeyed a cubic relationship up to 200 h and thereafter changed to parabolic at prolonged exposure times. At 593°C, it followed a parabolic relationship. After heat treatment at 700°C, the oxidation obeyed a parabolic relationship up to 200 h and thereafter changed to linear at prolonged exposure times. The observed transition is believed to be due to the differences observed in the oxide scale. The activation energy for parabolic oxidation was estimated to be 157 kJ/mol. In addition, alpha-case layer was evaluated using optical microscope, electron probe micro-analyser and microhardness tester. The thickness of the alpha-case layer was found to be a function of temperature and time, increasing proportionally, and following a parabolic relationship. The activation energy for the formation of alpha-case layer was estimated to be 153 kJ/mol. - Highlights: • Transition in oxidation kinetics was observed in Ti–6Al–2Sn–4Zr–2Mo alloy in the temperature range 500–700°C. • The activation energy for parabolic oxidation and for alpha-case formation is about 157 kJ/mol and 153 kJ/mol. • Thickness of alpha-case layer estimated by optical microscopy and electron probe microanalysis is comparable.

36 MATERIALS SCIENCE↗

Temperature dependence of the electrical properties of hydrogen titanate nanotubes

The temperature dependence of the electrical properties of hydrogen-rich titanate nanotubes (H-TNTs) in the 90–270 °C range was investigated by impedance spectroscopy. Three types of dominant conduction were found which depend on the previous thermal treatment of the samples. For untreated samples, at low temperatures (T < 100 °C), electrical conductivity is relatively high (>10{sup −4} S/cm at T ≈ 90 °C) and is dominated by protonic transport within structural water molecules. For thermal annealing in inert atmosphere up to 150 °C, water molecules are released from the nanotube structure resulting in a dehydrated H{sub 2}Ti{sub 3}O{sub 7} phase. Such phase has a low, thermally-dependent, electrical conductivity (10{sup −8} S/cm at T ≈ 90 °C) with activation energy of 0.68 eV. For samples annealed up to 260 °C, loss of OH groups, and consequent generation of oxygen vacancies, occurs that result in the non-stoichiometric H{sub 2(1−z)}Ti{sub 3}O{sub 7−z} phase. This phase has much higher conductivity (10{sup −5} S/cm at T ≈ 90 °C) and lower associated activation energy (0.40 eV). The generation of oxygen vacancies is confirmed by electron paramagnetic resonance measurements at room temperature, which revealed the presence of single-electron-trapped oxygen vacancies. The activation energy value found is consistent with the thermal ionization energy of the oxygen vacancies. Such defect formation represents the initial stage of the phase transformation from titanate to TiO{sub 2} (B). X-ray diffraction and Raman spectroscopy measurements also support such interpretation.

36 MATERIALS SCIENCE↗

Quantification of Kinetic Rate Law Parameters of Uranium Release from Sodium Autunite as a Function of Aqueous Bicarbonate Concentrations

ABSTRACT: Hydrogen carbonate is one of the most significant components within the uranium geochemical cycle. In aqueous solutions, hydrogen carbonate forms strong complexes with uranium. As such, aqueous bicarbonate may significantly increase the rate of uranium release from uranium minerals. Quantifying the relationship of aqueous hydrogen carbonate solutions to the rate of uranium release during dissolution is critical to understanding the long-term fate of uranium within the environment. Single-pass flow-through (SPTF) experiments were conducted to estimate the rate of uranium release from Na meta-autunite as a function of bicarbonate solutions (0.0005-0.003 M) under the pH range of 6-11 and temperatures of 5-60oC. Consistent with the results of previous investigation, the rate of uranium release from sodium autunite exhibited minimal dependency on temperature; but were strongly dependent on pH and increasing concentrations of bicarbonate solutions. Most notably at pH 7, the rate of uranium release exhibited 370 fold increases relative to the rate of uranium release in the absence of bicarbonate. However, the effect of increasing concentrations of bicarbonate solutions on the release of uranium was significantly less under higher pH conditions. It is postulated that at high pH values, surface sites are saturated with carbonate, thus the addition of more bicarbonate would have less effect on uranium release. Results indicate the activation energies were unaffected by temperature and bicarbonate concentration variations, but were strongly dependent on pH conditions. As pH increased from 6 to 11, activation energy values were observed to decrease from 29.94 kJ mol-1 to 13.07 kJ mol-1. The calculated activation energies suggest a surface controlled dissolution mechanism.

Aqueous Bicarbonate↗

Secondary creep behavior of Zr-4 claddings under LOCA conditions

The thermo-mechanical behavior of Zircaloy-4 fuel rods under Loss-Of-Coolant Accident (LOCA) conditions in water cooled reactors is investigated. A custom experimental setup is dedicated to the high-temperature creep ballooning study of 90 mm long cladding samples. Creep tests were performed under an inert environment (argon), for temperatures from 750 to 850 C. degrees and internal pressures ranging from 1 to 5 MPa. During its operating life, Zr-4 cladding is submitted to oxidation and hydriding. These parameters strongly influence the creep behavior of Zirconium alloys at high temperatures. A first campaign on as-received Zr-4 was performed. Creep-rates are computed using 2-Dimensional Digital Image Correlation (2D-DIC) and are correlated to local temperatures measured using Near Infra-Red thermography. As-received Zr-4 behavior laws are determined using Finite Element Model Updating (FEMU). Norton exponents and activation energies are determined for thermal-mechanical conditions of the performed tests. The results show that the effect of applied stress on the Norton exponent is evidenced in the study for both α-phase and (α + β)-phase domains. The determined stress exponent magnitudes are very consistent with literature data depending on the thermomechanical test conditions. The activation energy parameter is very sensitive to the thermo-mechanical conditions and remains valid within a limited temperature and stress ranges to the authors' knowledge. The beginning of the (α + β)-phase domain is clearly identified with the activation energy increase. Finally, steady-state creep is accurately modeled depending on ballooning thermo-mechanical conditions.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Nuclear magnetic resonance study of hydrogen mobility in LaY{sub 2}Ni{sub 9}H{sub x} and CeY{sub 2}Ni{sub 9}H{sub x}

In order to investigate the mobility of hydrogen in the ternary compounds LaY{sub 2}Ni{sub 9} and CeY{sub 2}Ni{sub 9}, we have measured the proton nuclear magnetic resonance (NMR) spectra and the proton spin-lattice relaxation rates R{sub 1} for LaY{sub 2}Ni{sub 9}H{sub x} (x=0.78 and 10.3) and CeY{sub 2}Ni{sub 9}H{sub x} (x=0.79 and 7.2). The measurements have been performed at the resonance frequencies of 14, 23.8 and 90 MHz over the temperature range of 11-404 K. For LaY{sub 2}Ni{sub 9}H{sub x}, the behavior of R{sub 1} is consistent with the presence of a considerable contribution due to motionally modulated dipole-dipole interaction between nuclear spins. This contribution can be satisfactorily described in terms of the Bloembergen-Purcell-Pound model with a Gaussian distribution of activation energies for hydrogen diffusion; the value of the average activation energy resulting from such a description for LaY{sub 2}Ni{sub 9}H{sub 10.3} is approximately 0.36 eV. For CeY{sub 2}Ni{sub 9}H{sub x} compounds, the measured proton spin-lattice relaxation rates are dominated by the contribution due to the interaction between proton spins and paramagnetic centers over the entire temperature range studied. Only qualitative information on H mobility in these compounds has been obtained from the narrowing of NMR spectra. Possible paths of H diffusion in LaY{sub 2}Ni{sub 9}H{sub x} and CeY{sub 2}Ni{sub 9}H{sub x} are discussed in terms of the distances between the interstitial sites occupied by hydrogen. - Graphical abstract: The temperature dependences of the proton spin-lattice relaxation rates R{sub 1} measured at 14, 23.8 and 90 MHz for LaY{sub 2}Ni{sub 9}H{sub 10.3}. The frequency-dependent increase in R{sub 1} at T>250 K indicates the onset of the motional contribution to the relaxation rates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The kinetics of Al-Si spinel phase crystallization from calcined kaolin

The crystallization of Al-Si spinel from medium ordered kaolin with high content of kaolinite was investigated using the differential thermal analysis (DTA). The apparent activation energy of the process was evaluated from the dependence of exothermic peak of crystallization on heating rate. Within the applied interval of heating rate (1-40 K min{sup -1}) the temperature of peak maximum increases from initial value of 1220.5 K in about 54.2 K. The apparent activation energy of the process 856{+-}2 kJ mol{sup -1}was calculated using the Kissinger equation. The growth morphology of Al-Si spinel crystal was evaluated from the Avrami parameter. The average value of morphology parameter determined within the observed interval of heating rate is 3.08{+-}0.03. This value indicates that crystallization mechanism of Al-Si spinel phase proceeds by bulk nucleation of the new phase with constant number of nuclei and that the three-dimensional growth of crystals is controlled by the reaction rate on the phases interface. - Graphical abstract: Kinetics of crystallization of Al-Si spinel from calcined kaolin was investigated by the DTA using the Kissinger kinetic approach. The apparent activation energy and morphology parameter of the process is 856{+-}2 kJ mol{sup -1} and 3.08{+-}0.03, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Diffusion and mobility of atomic particles in a liquid

The diffusion coefficient of a test atom or molecule in a liquid is determined for the mechanism where the displacement of the test molecule results from the vibrations and motion of liquid molecules surrounding the test molecule and of the test particle itself. This leads to a random change in the coordinate of the test molecule, which eventually results in the diffusion motion of the test particle in space. Two models parameters of interaction of a particle and a liquid are used to find the activation energy of the diffusion process under consideration: the gas-kinetic cross section for scattering of test molecules in the parent gas and the Wigner–Seitz radius for test molecules. In the context of this approach, we have calculated the diffusion coefficient of atoms and molecules in water, where based on experimental data, we have constructed the dependence of the activation energy for the diffusion of test molecules in water on the interaction parameter and the temperature dependence for diffusion coefficient of atoms or molecules in water within the models considered. The statistically averaged difference of the activation energies for the diffusion coefficients of different test molecules in water that we have calculated based on each of the presented models does not exceed 10% of the diffusion coefficient itself. We have considered the diffusion of clusters in water and present the dependence of the diffusion coefficient on the cluster size. The accuracy of the presented formulas for the diffusion coefficient of atomic particles in water is estimated to be 50%.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Dynamics of Hydrophobic Core Phenylalanine Residues Probed by Solid-State Deuteron NMR

We conducted a detailed investigation of the dynamics of two phenylalanine side chains in the hydrophobic core of the villin headpiece subdomain protein (HP36) in the hydrated powder state over the 298–80 K temperature range. We utilized static deuteron NMR measurements of longitudinal relaxation and line shapes supplemented with computational modeling. The temperature dependence of the relaxation times reveals the presence of two main mechanisms that can be attributed to the ring-flips, dominating at high temperatures, and small-angle fluctuations, dominating at low temperatures. The relaxation is non- exponential at all temperatures with the extent of non-exponentiality increasing from higher to lower temperatures. This behavior suggests a distribution of conformers with unique values of activation energies. The central values of the activation energies for the ring-flipping motions are among the smallest reported for aromatic residues in peptides and proteins and point to a very mobile hydrophobic core. The analysis of the widths of the distributions, in combination with the earlier results on the dynamics of flanking methyl groups (Vugmeyster et al., J. Phys. Chem. 2013, 117, 6129–6137), suggests that the hydrophobic core undergoes concerted fluctuations. There is a pronounced effect of dehydration on the ring-flipping motions, which shifts the distribution toward more rigid conformers. The cross-over temperature between the regions of dominance of the small-angle fluctuations and ring-flips shifts from 195 K in the hydrated protein to 278 K in the dry one. This result points to the role of solvent in the onset of the concerted fluctuations of the core and highlights aromatic residues as markers of the protein dynamical transitions.

Environmental Molecular Sciences Laboratory↗

Insights from experiment and ab initio calculations into the glasslike transition in the molecular conductor κ - ( BEDT - TTF ) 2 Hg ( SCN ) 2 Cl

We present high-resolution measurements of the relative length change as a function of temperature of the organic charge-transfer salt kappa-(BEDT-TTF) 2 Hg(SCN) 2 Cl. We identify anomalous features at T g ≈ 63 K which can be assigned to a kinetic glasslike ordering transition. By determining the activation energy E-A, this glasslike transition can be related to conformational degrees of freedom of the ethylene endgroups of the organic building block BEDT-TTF. As opposed to other $\kappa$-(BEDT-TTF) 2 X salts, we identify a peculiar ethylene endgroup ordering in the present material in which only one of the two crystallographically inequivalent ethylene endgroups is subject to glasslike ordering. This experimental finding is fully consistent with our predictions from ab initio calculations from which we estimate the energy differences Delta E and the activation energies E-A between different conformations. The present results indicate that the specific interaction between the ethylene endgroups and the nearby anion layers leads to different energetics of the inequivalent ethylene endgroups, as evidenced by different ratios E A /Δ E. We infer that the ratio E A /Δ E is a suitable parameter to identify the tendency of ethylene endgroups toward glasslike freezing.

Gati, Elena↗

Understanding the Correlation between Ga Speciation and Propane Dehydrogenation Activity on Ga/H-ZSM-5 Catalysts

H-ZSM-5 zeolite-supported Ga (Ga/H-ZSM-5) has been considered as a selective catalyst for nonoxidative propane dehydrogenation (PDH) for decades; however, the reaction mechanism remains a topic of considerable discussion. In particular, the correlation between various Ga species present on the catalyst at the reaction conditions and the PDH activity has yet to be established. In this work, intrinsic PDH rates and activation energies were determined on Ga + –H + pair sites and isolated Ga + sites on Ga/H-ZSM-5 samples with a wide range of Si/Al and Ga/Al ratios. Here, the turnover frequency on Ga + –H + pair sites in the PDH is higher than that of isolated Ga + sites by a factor of ~15. Experimental measurements combined with a dual-site model show the activation energy in the PDH on the Ga + –H + pair sites and isolated Ga + sites to be 90.8 ± 1.5 and 117 ± 4.7 kJ·mol –1 , respectively. These results demonstrate that Ga+–H+ pair sites are much more active in the PDH than isolated Ga + sites. The activation energy of GaH x decomposition to form H 2 was determined to be 40–60 kJ·mol –1 higher than that of the PDH on Ga species, suggesting that the GaH x decomposition is unlikely to be part of the PDH mechanism. Although both Brønsted acid and Ga sites interact with propane, Fourier transform infrared spectroscopy results provide strong evidence suggesting that the alkyl mechanism is more likely in the PDH on Ga/H-ZSM-5 catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Magnetic Free Energy in Active Regions

The magnetic field permeating the solar atmosphere governs much of the structure, morphology, brightness, and dynamics observed on the Sun. The magnetic field, especially in active regions, is thought to provide the power for energetic events in the solar corona, such as solar flares and Coronal Mass Ejections (CME) and is believed to energize the hot coronal plasma seen in extreme ultraviolet or X-rays. The question remains what specific aspect of the magnetic flux governs the observed variability. To directly understand the role of the magnetic field in energizing the solar corona, it is necessary to measure the free magnetic energy available in active regions. The grant now expiring has demonstrated a new and valuable technique for observing the magnetic free energy in active regions as a function of time.

Metcalf, Thomas R.↗

Admittance spectroscopy of solar cells based on GaPNAs layers

Admittance spectroscopy is used to study defect levels in the layers of a GaPNAs quaternary solid solution. Centers with an activation energy of 0.22 eV and a capture cross section of ∼2.4 × 10{sup −15} cm{sup 2} are found in doped n-GaPNAs layers grown on GaP substrates. These centers correspond to already known Si{sub Ga} + V{sub P} defects in n-GaP; annealing decreases their concentration by several times. A level with an activation energy of 0.23–0.24 eV and capture cross section of ∼9.0 × 10{sup −20} cm{sup 2} is found in undoped GaPNAs layers grown on Si and GaP substrates. The concentration of these centers substantially decreases upon annealing, and, at annealing temperatures exceeding 600°C, there is absolutely no response from these defects. For undoped GaPNAs layers grown on GaP substrates, a level with an activation energy of 0.18 eV and capture cross section of ∼1.1 × 10{sup −16} cm{sup 2} is also found. The concentration of these centers remains unchanged upon annealing.

36 MATERIALS SCIENCE↗

Uniaxial creep response of Alloy 800H in impure helium and in low oxygen potential environments for nuclear reactor applications.

Studies were conducted on the creep behavior of Alloy 800H in impure helium and in a 1%CO-CO{sub 2} environment. At relatively low applied stresses and at low temperatures, the presence of methane in helium reduced the rupture strain significantly while increasing the rupture life relative to the behavior in pure helium. The degradation in rupture strain is due to the occurrence of cleavage fracture in the He + CH{sub 4} environment; this explanation is also supported by high activation energy (Q = 723 kJ/mol) for creep in He + CH{sub 4}. At higher applied stresses and also at higher temperatures, creep-rupture behavior in He and He + CH{sub 4} was similar. Creep response in pure He and in CO-CO{sub 2} follows a dislocation climb-controlled power-law behavior whereas that in He + CH{sub 4} has a different behavior as indicated by the high stress exponent (n = 9.8). The activation energy for creep in pure He was 391 kJ/mol and in CO-CO{sub 2} was 398 kJ/mol, and appeared to be independent of stress in both environments. On the other hand, in He + CH{sub 4}, the activation energy (Q = 723 kJ/mol) seems to be dependent on stress.

03 NATURAL GAS↗