Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “A. Dislocations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Helium co-implantation effects on dislocation loop evolution during in situ ion irradiations of a novel additive-manufactured Fe-9Cr steel alloy

This study examines the impact of helium injection rate on dislocation loop evolution during ion irradiation of a novel, additively manufactured (AM) 9Cr reduced-activation ferritic/martensitic (RAFM) steel. Through in situ transmission electron microscopy ion irradiations and post-irradiation characterization, the effects of simultaneous 1 MeV Kr²⁺ and 12 keV He⁺ ion irradiation at 400°C to 5 dpa with varying helium levels were examined. The findings reveal that helium co-injection significantly increases dislocation loop density, primarily through the formation of small defect features exhibiting contrast and projected morphologies consistent with a⟨100⟩ loops (∼1 nm), while suppressing larger a/2⟨111⟩ loops. The findings underscore the complex interplay among continuously increasing helium content, temperature, and alloy composition in the evolution of dislocation loops under irradiation in RAFM steels. The study highlights the need for further investigation into helium-mediated mechanisms, such as proposed interactions between self-interstitial atoms and helium atoms, to enhance the performance of RAFM steels in advanced nuclear reactors.

ANA2↗
DOE OSTI2020

Dislocation density in fine grain-size spark-plasma sintered aluminum measured using high brightness synchrotron radiation

In this study, three-dimensional orientation mapping of samples of aluminum prepared by spark plasma sintering (SPS) with average grain sizes of 5 μm and 1 μm has been carried out using high-brightness synchrotron radiation, from which the geometrically necessary dislocation (GND) density has been determined. The low average measured GND density values confirm that the SPS process can be used to produce samples containing grains with dislocation density similar to that of fully recrystallized coarse-grained samples. Values of GND density are also compared to those obtained from electron back-scatter diffraction studies on the same material, highlighting the significantly higher angular resolution of the synchrotron data. For the 5 μm grain-size sample the measured GND density can account for a large fraction of the previously observed positive Hall-Petch deviation of this material. For the 1 μm grain-size sample, however, the GND-based strengthening contribution is much smaller than the reported positive Hall-Petch deviation, such that the additional strength may be reliably associated with dislocation source-limited strengthening.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Exceptional thermal stability of additively manufactured CoCrFeMnNi high-entropy alloy with cellular dislocation structures

CoCrFeMnNi high-entropy alloy (HEA) was additively manufactured (AM) by laser powder-bed fusion (L-PBF). The AM CoCrFeMnNi has prominent cellular dislocation structures with a small number of Mn-rich oxides. The thermal stability of the AM CoCrFeMnNi was investigated by isochronal annealing treatment at various temperatures from 400 to 1300°C for 1h. Microstructural analysis shows slow dislocation recovery, retarded recrystallization process, and precipitation of additional Cr-Mn based oxides during thermal annealing, resulting in exceptional thermal stability and retained high hardness at elevated temperatures. Further, by thermodynamic calculations, a low stored energy of 1.31 MJ/m 3 and a high activation energy of 353 kJ/mol for recrystallization were estimated for the AM CoCrFeMnNi. The exceptional thermal stability of the AM CoCrFeMnNi HEA is mechanistically attributed to the low crystallographic misorientations across the dislocation cell walls, sluggish atomic diffusion, and the pinning effects of the oxide nanoprecipitates.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Inversion of dislocation-impurity interactions in α -Fe under magnetic state changes

Here, in this work, we investigate the dislocation-impurity interaction energies and their profiles for various 3d elements —V, Cr, Mn, Cu, Ni, and Co —in and around 1/2 $\langle111\rangle$ screw dislocations in α -Fe using ab initio methods. We consider the ferromagnetic and paramagnetic states, with the latter being modeled through both the disordered local moment model and a spin-wave approach. Our findings reveal that (1) magnetic effects are large compared to size misfit effects of substitutional impurities, and (2) dislocation-impurity interactions are dependent on the magnetic state of the matrix and thermal lattice expansion. In particular, Cu changes from core-attractive in the ferromagnetic state to repulsive in the paramagnetic state.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Dislocation-Activated Low Platinum-Loaded PtCu Nanoparticles Welded onto the Substrate for Practical Acidic Hydrogen Generation

Although transition metal (M) alloying with platinum (Pt) is a promising approach to reduce the Pt dosage required in the hydrogen evolution reaction (HER), the catalytic activity and durability of PtM alloy are often unsatisfactory for acidic HER, especially at high currents, due to a reduced number of highly active sites (Pt) at the atomic level and challenges in stabilizing them to prevent detachment and aggregation. Herein, we report a robust functional structure integrated electrode (D-PtCu/CF) with abundant edge dislocations and very low platinum content (0.1 mg cm -2 ) to achieve high activity and stability in acidic HER within a proton exchange membrane water electrolysis cell (PEMWE). D-PtCu/CF exhibits high Pt mass activity (10.28 A mg Pt -1 ) and excellent operational stability (negligible decay after 200 h). X-ray absorption spectroscopy and in situ electrochemical experiments reveal that the lattice distortion caused by edge dislocations in PtCu mainly affects Pt atoms by compressing strain, reducing their ability to adsorb H. At the same time, Cu atoms are subjected to tensile strain, enhancing the bonding between Cu and H. Therefore, edge dislocations not only improve the intrinsic catalytic activity of Pt atoms but also increase the number of active sites (Cu) available for hydrogen adsorption, which synergistically accelerates the kinetics of the HER reaction. Finally, the PEMWE employing the D-PtCu/CF catalytic electrode can operate stably for 100 h at an industrial-level current density of 500 mA cm -2 with 1.63 V.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2024

Effect of helium bubbles on the mobility of edge dislocations in copper

Abstract Helium bubbles can form in materials upon exposure to irradiation. It is well known that the presence of helium bubbles can cause changes in the mechanical behavior of materials. To improve the lifetime of nuclear components, it is important to understand deformation mechanisms in helium-containing materials. In this work, we investigate the interactions between edge dislocations and helium bubbles in copper using molecular dynamics (MD) simulations. We focus on the effect of helium bubble pressure (equivalently, the helium-to-vacancy ratio) on the obstacle strength of helium bubbles and their interaction with dislocations. Our simulations predict significant differences in the interaction mechanisms as a function of helium bubble pressure. Specifically, bubbles with high internal pressure are found to exhibit weaker obstacle strength as compared to low-pressure bubbles of the same size due to the formation of super-jogs in the dislocation. Activation energies and rate constants extracted from the MD data confirm this transition in mechanism and enable upscaling of these phenomena to higher length-scale models.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Dislocation loop evolution in Kr-irradiated ThO 2

Here, the early stage of microstructural evolution of ThO 2 , under krypton irradiation at 600, 800, and 1000°C, was investigated using in situ transmission electron microscopy (TEM). Dislocation loops grew faster, whereas their number density decreased with increasing irradiation temperature. Loop density was found to decrease with ion dose. Interstitial dislocation loops, including Frank loops with Burgers vector of $\textit{a}/3\langle111\rangle$ and perfect loops with Burgers vector of $\textit{a}/2\langle110\rangle$, were determined by traditional TEM and atomic resolution–scanning TEM techniques. Atomistic and mesoscale level modeling are performed to interpret experimental observations. The migration energy barriers of defects in ThO 2 were calculated using density-functional theory. The energetics of different dislocation loop types were studied using molecular dynamics simulations. Loop density and diameter were analyzed using a kinetic rate theory model that considers stoichiometric loop evolution. This analysis reveals that loop growth is governed by the mobility of cation interstitials, whereas loop nucleation is determined by the mobility of anion defects. Lastly, a rate theory model was used to extract the diffusion coefficients of thorium interstitials, oxygen interstitials, and vacancies.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2019

Superconductivity Localized at an Edge Dislocation

A spatially inhomogeneous superconductor is considered in the Ginzburg—Landau approximation. A spatial inhomogeneity (edge dislocation) is described in terms of the local shift of the superconducting transition temperature in its neighborhood. It is assumed that shift δT{sub c}(R) is proportional to the elastic stress produced by the dislocation. It is shown that in this case, localized superconducting states exist at temperatures exceeding T{sub c} of a homogeneous superconductor. The main characteristics of such states are obtained. The same approach is used for describing pinning of Abrikosov vortices at an edge dislocation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Imaging Light‐Induced Migration of Dislocations in Halide Perovskites with 3D Nanoscale Strain Mapping

Abstract In recent years, halide perovskite materials have been used to make high‐performance solar cells and light‐emitting devices. However, material defects still limit device performance and stability. Here, synchrotron‐based Bragg coherent diffraction imaging is used to visualize nanoscale strain fields, such as those local to defects, in halide perovskite microcrystals. Significant strain heterogeneity within MAPbBr 3 (MA = CH 3 NH 3 + ) crystals is found in spite of their high optoelectronic quality, and both 〈100〉 and 〈110〉 edge dislocations are identified through analysis of their local strain fields. By imaging these defects and strain fields in situ under continuous illumination, dramatic light‐induced dislocation migration across hundreds of nanometers is uncovered. Further, by selectively studying crystals that are damaged by the X‐ray beam, large dislocation densities and increased nanoscale strains are correlated with material degradation and substantially altered optoelectronic properties assessed using photoluminescence microscopy measurements. These results demonstrate the dynamic nature of extended defects and strain in halide perovskites, which will have important consequences for device performance and operational stability.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Enhanced numerical design of two-barrier infrared detectors with III–V compounds heterostructures considering the influence of lattice strain and misfit dislocations on the band gap

The goal of this work is the design of efficient infrared radiation detectors based on InAsSb compounds with two energy barriers around the absorber region. Two types of two-barrier detectors that work in the 3–5.5 μm wavelength range at 230 K is designed. Using our computer program to iteratively solve the Poisson equation, the spatial distribution of energy band edges in III–V heterostructures was calculated The influence of lattice stress, bending of the structure and doping on the energy shift of the edge of the bands is considered. Lattice strain is the cause of the formation of the misfit dislocations at the boundaries of the individual layers of the heterostructure. These dislocations partially relax the resulting stress and affect the lattice deformation in individual layers. From the minimum elastic energy condition, the density of these dislocations is determined. It has been shown that the band offset can be eliminated in the areas of both barriers in the designed two-barrier detectors.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2026

Temperature and dose rate effects on dislocation loop formation and decoration in self-ion irradiated high-purity Fe-Cr model alloys

Body-centered cubic (BCC) Fe-based alloys are promising candidate materials for advanced nuclear reactors. A widespread perception is that the addition of Cr favors the formation of ½ <111> dislocation loops. However, the Cr effects on dislocation loop formation/evolution remain unclear due to the limited experimental studies. In this study, we irradiate ultra-high purity bulk BCC Fe-xCr (x = 3, 5, and 8 wt%) with 6.7-8 MeV Fe ions over a wide range of temperatures (Tirr = 250-500 °C) and dose rates (10⁻⁵ to 10⁻³ dpa/s) to two midrange doses (0.35 and 3.5 dpa). The major irradiation-induced microstructures are loop decoration along non-screw dislocation lines at low temperatures and high dose rates as well as self-assembled loops at elevated temperatures. Post-irradiation Burgers vector analysis via g•b method on loops and electron tomography reveals that <001> preponderance is observable in all irradiated Fe-Cr samples at elevated temperature, resulting from stronger elastic energy originating from <001> edge.

Li, Yao [University of Tennessee (UT)]↗
DOE OSTI2021

Activation of dislocations in Mg with solute Y

Mg-Y cast alloy shows excellent ductility (elongation to failure > 15%) compared with pure Mg and commercial Mg cast alloys. By monitoring the microstructure evolution during an in situ tensile test of a Mg-2.5 wt%Y alloy, we identify the activation of prismatic slip, which is rare in Mg. Synchrotron X-ray micro-beam Laue diffraction (μ-Laue) and transmission electron microscopy revealed the morphology of prismatic slip bands and individual dislocations. Density functional theory and molecular dynamics calculations indicate that solute Y can significantly reduce the stacking fault energy (SFE) along direction on prismatic plane in Mg lattice and thus facilitate the nucleation of dislocations during deformation. The presence of free dislocations in the Mg lattice can also lead to nucleation of {10–12} twins even under unfavorable geometric conditions.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Dislocation loop evolution and radiation hardening in nickel-based concentrated solid solution alloys

Effects of chemical composition, ion irradiation dose and temperature on unfaulting of irradiation induced Frank dislocation loops to perfect loops in two nickel based single-phase solid solution alloys, Ni–20Fe and NiFe–20Cr, have been studied. The fraction of Frank loops decreases with irradiation dose from 7.2 to 38.4 dpa at 500°C, but with more Frank loops remaining in the ternary alloy. However, perfect loops and dislocation networks become the dominant features of defects at 580°C in both alloys. The results indicate a thermally assisted loop unfaulting process that may be hindered by more sluggish defect motion in the alloy with more chemical components. Nano-indentation with both continuous stiffness method and single indentation method are used to measure radiation hardening. Loop unfaulting in both alloys irradiated at 580°C reduced radiation hardening while significant hardening is observed after irradiation at 500°C. The quasi-static single indentation method exhibits lower hardness results compared to continuous stiffness method, because dislocations induced from the cyclic loading in the latter method get relaxed and stabilized, resulting in higher resistance to the indenter.

36 MATERIALS SCIENCE↗
DOE OSTI2023

The effects of radiation-induced grain subdivision and dislocations on the fracture properties of uranium dioxide

Microcantilever bending tests were applied on uranium dioxide samples irradiated by 84 MeV Xe ions. Depending on the initial grain sizes, different levels of grain subdivision and dislocation development were observed near the irradiated surface. These radiation damage features were shown to degrade the fracture properties of both samples. The fundamental aspects of the radiation-microstructure-property relationships were discussed in this paper, taking a holistic consideration of the microcantilever bending data, fractography and microstructures. The separate effects of the irradiation-induced grain subdivision and dislocations on the fracture initiation and propagation of uranium dioxide were discussed. In conclusion, it was observed that radiation-induced dislocations and grain subdivision, without the presence of Xe bubbles co-located with the defects, cause reductions in the Young's modulus, fracture strain, and fracture stress, and a transition to intergranular fracture.

36 MATERIALS SCIENCE↗
DOE OSTI2019

An investigation of geometrically necessary dislocations and back stress in large grained tantalum via EBSD and CPFEM

This study explores the evolution of GNDs and their effects on back stress through experimental and computational methods. Four large-grained tantalum tensile specimens were strained in uniaxial tension, electron backscatter diffraction (EBSD) data were collected, and geometrically necessary dislocation (GND) maps of the four specimens in the unloaded state were produced. EBSD-based GND maps revealed several types of features with high GND content which caused back stress in the specimens. Correlations between five geometrically-based grain boundary (GB) transmission factors and the GB GND content were evaluated, and statistically significant correlations were found for transmission factors based on Livingston and Chalmer’s N factor, Werner and Prantl’s slip transfer number, and GB misorientation. The sign of individual components of the Nye tensor were used to visually and quantitatively identify clustering of GNDs of the same sign, thus giving additional evidence of increasing back stress due to deformation. Deformation of one of the specimens was simulated using multiple CPFEM based modeling approaches and predicted stress-strain responses are compared. The super dislocation model (SD model) — a crystal plasticity finite element method (CPFEM) which incorporates elastic dislocation interactions — was able to isolate impact of back stress on the overall flow stress. The SD model predicted correct stresses when compared with experimental data; however, when the elastic interactions in the SD model were turned off, stress predictions were 25% too low. Thus, demonstrating the importance of incorporating back stress into the model.

42 ENGINEERING↗
DOE OSTI2023

Prediction of dislocation - grain boundary interactions in FCC aluminum bicrystals using a modified continuum criterion and machine learning methods

Mechanical properties of metals such as strength and toughness are strongly correlated to complex interactions between various defects in the crystalline structure. While elementary interactions between these defects have been investigated using recent micro- and nano-characterization techniques, understanding of the detailed interaction mechanisms has hardly been obtained. To understand defect-driven plasticity at various time and length scales, it is necessary to formulate a general guideline to predict both the interaction type (transmission or reflection) and the dislocation's subsequent slip system after the interaction. Many criteria based on the geometric alignment of the defects have been developed to predict this phenomenon, but these have yet to be found to be accurate when applied to general data sets of grain boundaries (GBs). With this motivation, we conduct a systematic study using molecular dynamics (MD) models of bicrystals to analyze defect interaction process between a prismatic dislocation loop and eleven different grain boundaries of the following character: three tilt, three twist, and five mixed. Based on the MD observations, two new prediction methods are developed: the first is a new data-driven parametric score function based on the classical geometric criteria, and the second is by applying Gaussian process machine learning methods to find the probability distribution of a hidden function. In conclusion, the proposed data-driven prediction methods could pave a new way to predict the unit interaction of dislocations with various GBs, which could show much higher accuracy compared to pre-existing geometric criteria.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Rationalization of the tensile creep behavior of the Nb45Ta25Ti15Hf15 bcc refractory complex concentrated alloy using Rao-Suzuki screw dislocation glide model

Published experimental tensile creep data for refractory body-centered cubic alloy Nb45Ta25Ti15Hf15 (NTTH) at temperatures ranging from 850–950 °C and applied tensile stresses 50–300 MPa are analyzed using the Rao-Suzuki screw dislocation glide model of solid solution strengthening. It is shown that the experimental creep data as well as transmission electron microscopy observations of post- creep deformation dislocation microstructure are in agreement with the model results. This suggests that the creep deformation of NTTH at 850–950 °C is controlled by screw dislocation glide.

Rao, Satish I↗
DOE OSTI2022

Extraordinary Strain Hardening from Dislocation Loops in Defect-Free Al Nanocubes

The complex interaction of crystalline defects leads to strain hardening in bulk metals. Metals with high stacking fault energy (SFE), such as aluminum, tend to have low strain hardening rates due to an inability to form stacking faults and deformation twins. Here, we use in situ SEM mechanical compressions to find that colloidally synthesized defect-free 114 nm Al nanocubes combine a high linear strain hardening rate of 4.1 GPa with a high strength of 1.1 GPa. These nanocubes have a 3 nm self-passivating oxide layer that has a large influence on mechanical behavior and the accumulation of dislocation structures. Post-compression TEM imaging reveals stable prismatic dislocation loops and the absence of stacking faults. MD simulations relate the formation of dislocation loops and strain hardening to the surface oxide. These results indicate that slight modifications to surface and interfacial properties can induce enormous changes to mechanical properties in high SFE metals.

36 MATERIALS SCIENCE↗