SEARCH · Engineering Papers

Results for “weight coefficient”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

All sources NASA NTRS DOE OSTI

NASA NTRS1984

Benefits of high aerodynamic efficiency to orbital transfer vehicles

The benefits and costs of high aerodynamic efficiency on aeroassisted orbital transfer vehicles (AOTV) are analyzed. Results show that a high lift to drag (L/D) AOTV can achieve significant velocity savings relative to low L/D aerobraked OTV's when traveling round trip between low Earth orbits (LEO) and alternate orbits as high as geosynchronous Earth orbit (GEO). Trajectory analysis is used to show the impact of thermal protection system technology and the importance of lift loading coefficient on vehicle performance. The possible improvements in AOTV subsystem technologies are assessed and their impact on vehicle inert weight and performance noted. Finally, the performance of high L/D AOTV concepts is compared with the performances of low L/D aeroassisted and all propulsive OTV concepts to assess the benefits of aerodynamic efficiency on this class of vehicle.

Andrews, D. G.↗

NASA NTRS1985

Composite materials for space structures

Composite materials have been extensively used for spacecraft structures because of their unique combination of high specific strength and stiffness, low weight, good dimensional stability, and high specific damping capacity. High-modulus graphite reinforced epoxies have been the principal composite material system used. For early applications composites were selected primarily to reduce weight. However, the development of high precision structures such as The Space Telescope required high modulus composites with a coefficient of thermal expansion close to zero to meet design requirements. The use of advanced composites for space structures is reviewed in this paper. Barriers likely to limit further applications of composites are discussed and highlights of current research to improve composites are presented. New developments Jn composites technology which could impact future spacecraft systems are also reviewed.

Composites↗

NASA NTRS1986

Supersonic airfoil optimization

A procedure for the optimization of supersonic airfoils is presented. A nonlinear, full-potential solver (NCOREL) is coupled with a numerical optimizer (CONMIN). The NCOREL code is a three-dimensional supersonic marching method, however, only two-dimensional (conical) results are used for the airfoil problem. Each airfoil evaluated in the NCOREL aerodynamic code is composed of a linear combination of user-specified basis airfoils. The weighting factors of the basis airfoils plus the angle of attack form the design variable vector. The inviscid drag coefficient is minimized subject to lift and crossflow Mach number gradient constraints. The optimization strategy is found to be extremely important for the efficient determination of an optimum airfoil.

Pittman, J. L.↗

NASA NTRS2018

Evaluation of SMAP Downscaled Brightness Temperature Using SMAPEx-4/5 Airborne Observations

The Soil Moisture Active and Passive (SMAP) mission, launched by the National Aeronautics and Space Administration (NASA) on 31st January 2015, was designed to provide global soil moisture every 2 to 3 days at 9 km resolution by downscaling SMAP passive microwave observations obtained at 36 km resolution using active microwave observations at 3 km resolution, and then retrieving soil moisture from the resulting 9 km brightness temperature product. This study evaluated the SMAP Active/Passive (AP) downscaling algorithm together with other resolution enhancement techniques. Airborne passive microwave observations acquired at 1 km resolution over the Murrumbidgee River catchment in south-eastern Australia during the fourth and fifth Soil Moisture Active Passive Experiments (SMAPEx-4/5) were used as reference data. The SMAPEx-4/5 data were collected in May and September 2015, respectively, and aggregated to 9 km for direct comparison with a number of available resolution-enhanced brightness temperature estimates. The results show that the SMAP AP downscaled brightness temperature had a correlation coefficient (R) of 0.84 and Root-Mean-Squared Error (RMSE) of ~10 K, while SMAP Enhanced, Nearest Neighbour, Weighted Average, and the Smoothing Filter-based Modulation (SFIM) brightness temperature estimates had somewhat better performance (RMSEs of ~7 K and an R exceeding 0.9). Although the SFIM had the lowest unbiased RMSE of ~6 K, the effect of cloud cover on Ka-band observations limits data availability.

downscaled brightness temperature↗

NASA NTRS2020

Implementation Concept of Operation for a Multi-Purpose Cassegrain Solar Concentrator, Micro-Spectrometers, and Electrostatic Neutralizers to Enable In Situ Construction Activities plus Lunar, Planetary, and Deep Space Science Exploration on the Moon

The ability to utilize regolith would support human missions to the Moon and Mars by both stabilizing the surface as well as the use of indigenous resources. Precision landing requirements include surface stabilization to prevent damage or contamination due to regolith projectiles as a result of plume interaction with regolith. The use of indigenous resources rather than hauling materials from Earth appears to be economically a palatable option by converting indigenous resources to usable products. However, such activities have new technical challenges to overcome the issues related to lunar environmental conditions, a wide range of temperature fluctuation, extremely high vacuum, and electrostatically charged fine regolith dusts. For both the regolith sintering and extraction of resources onsite, a Cassegrain solar concentrator was studied for not only sintering lunar regolith into a hardened stabilized surface, but also other multiple applications. This report illustrates a Cassegrain solar concentrator that has multi-functional capabilities for space missions. Proper design and implementation of high-performance lightweight composite materials for the primary mirror of the Cassegrain concentrator can offer multiple capabilities to be performed on the Moon. The multiple applications studied with Cassegrain concentrators are (1) Solar sintering for landing pad and habitats, (2) Harvest of volatiles: H2O, O2, H2, and He-3, (3) Space antenna for telemetry and telecommunication, and (4) Space telescope with 20-meter aperture that exceeds the space telescopes to date in terms of the State-of-Art (SOA) in resolution and aperture diameter. In this study, a key emphasis was placed on the NASA Langley-developed boron nitride nanotube (BNNT) nanocomposite technology which is ideal for the segmented primary mirror structure of the Cassegrain system because it promises a very low coefficient of thermal expansion (CTE) and negligible Poisson ratio. Also, BNNT nanocomposites offer several noticeable benefits, such as light weight, radiation shielding capability, and mechanical strength for structural applications. Additionally, the NASA Langley-developed bullet-like micro-spectrometer and electrostatic power generator were reviewed for mineral mapping applications and electrostatic power generation and dust mitigation from electrostatically charged regolith.

landing pad↗

NASA NTRS1999

Global Mapping of Underwater UV Irradiances and DNA-Weighted Exposures using TOMS and SeaWiFS Data Products

The global stratospheric ozone-layer depletion results In an increase in biologically harmful ultraviolet (UV) radiation reaching the surface and penetrating to ecologically significant depths in natural waters. Such an increase can be estimated on a global scale by combining satellite estimates of UV irradiance at the ocean surface from the Total Ozone Mapping Spectrometer (TOMS) satellite instrument with the SeaWIFS satellite ocean-color measurements in the visible spectral region. In this paper we propose a model of seawater optical properties in the UV spectral region based on the Case I water model in the visible range. The inputs to the model are standard monthly SeaWiFS products: chlorophyll concentration and the diffuse attenuation coefficient at 490nm. Penetration of solar UV radiation to different depths in open ocean waters is calculated using the RT (radiative transfer) quasi-single scattering approximation (QSSA). The accuracy of the QSSA approximation in the water is tested using more accurate codes. The sensitivity study of the underwater UV irradiance to atmospheric and oceanic optical properties have shown that the main environmental parameters controlling the absolute levels of the UVB (280-320nm) and DNA-weighted irradiance underwater are: solar-zenith angle, cloud transmittance, water optical properties, and total ozone. Weekly maps of underwater UV irradiance and DNA-weighted exposure are calculated using monthly-mean SeaWiFS chlorophyll and diffuse attenuation coefficient products, daily SeaWiFS cloud fraction data, and the TOMS-derived surface UV irradiance daily maps. The final products include global maps of weekly-average UVB irradiance and DNA-weighted daily exposures at 3m and 10m, and depths where the UVB irradiance and DNA-weighted dose rate at local noon are equal to 10% of their surface values.

Vasilkov, Alexander↗

NASA NTRS1971

An Empirical Method for Determining the Lunar Gravity Field

A method has been devised to determine the spherical harmonic coefficients of the lunar gravity field. This method consists of a two-step data reduction and estimation process. In the first step, a weighted least-squares empirical orbit determination scheme is applied to Doppler tracking data from lunar orbits to estimate long-period Kepler elements and rates. Each of the Kepler elements is represented by an independent function of time. The long-period perturbing effects of the earth, sun, and solar radiation are explicitly modeled in this scheme. Kepler element variations estimated by this empirical processor are ascribed to the non-central lunar gravitation features. Doppler data are reduced in this manner for as many orbits as are available. In the second step, the Kepler element rates are used as input to a second least-squares processor that estimates lunar gravity coefficients using the long-period Lagrange perturbation equations.

Ferrari, A. J.↗

NASA NTRS1973

Lunar gravity derived from long-period satellite motion - A proposed method.

A new method has been devised to determine the spherical harmonic coefficients of the lunar gravity field. This method consists of a two-step data reduction and estimation process. In the first step, a weighted least-squares empirical orbit determination scheme is applied to Doppler tracking data from lunar orbits to estimate long-period Kepler elements and rates. Each of the Kepler elements is represented by an independent function of time. The long-period perturbing effects of the earth, sun, and solar radiation are explicitly modeled in this scheme. Kepler element variations estimated by this empirical processor are then ascribed to the non-central lunar gravitation features. Doppler data are reduced in this manner for as many orbits as are available. In the second step, the Kepler element rates are used as input to a second least-squares processor that estimates lunar gravity coefficients using the long-period Lagrange perturbation equations.

Ferrari, A. J.↗

NASA NTRS1975

Transonic off-design drag and performance of three mixed-compression axisymmetric inlets

An experimental investigation was conducted to determine the off-design drag and pressure performance of three axisymmetric supersonic inlets in the transonic speed range. For typical engine airflows at Mach 0.8 the drag coefficient varied from 0.045 to 0.09; at Mach 1.2 the largest drag coefficient measured was 0.25. Below Mach 0.9 a lower drag resulted when all or at least part of the excess weight flow was spilled over the cowl rather than through the bypass doors; above Mach 1.1 the lowest drag was obtained by bypassing excess flow.

Woollett, R. R.↗

NASA NTRS1980

Determination of the total grain size distribution in a vulcanian eruption column, and its implications to stratospheric aerosol perturbation

The total grain distribution of tephra from the eruption by the Fuego volcano in Guatemala on Oct. 14, 1974 was determined by grain size analysis. The region within each isopach has a grain distribution which was weighted proportionally to its percentage volume; the total distribution had a median grain size of 0.6 mm and a sorting coefficient of 2.3. The ash composed of fine particles did not fall in the volcano area as part of the recognizable tephra blanket; the eruption column reached well into the stratosphere to the height of 10-12 km above sea level, with mass flux rate estimated altitudes of 18-23 km

Murrow, P. J.↗

NASA NTRS1982

The inverse problem of constructing a gravimetric geoid

Computation of a single geoidal height from gravity acceleration data formally requires that the latter be known everywhere on the earth. A computational procedure based on linear inverse theory for estimating geoidal heights from incomplete sets of data is presented. The same scheme can be used to estimate gravity accelerations from altimetry-derived geoids. The systematic error owing to lack of data and the choice of a particular inverse operator is described by using resolution functions and their spherical harmonic expansions. An rms value of this error is also estimated by assuming a spectrum for the unknown geoid. The influence of the size of the data region, the spacing between data, the filtering applied to the data, and the model weighting function chosen are all quantified in a spherical geometry. The examples presented show that when low degree spherical harmonic coefficients are available - from satellite orbit analysis - a band-passed version of the geoid can be constructed from local gravity data, even with a relatively restricted data set.

Zlotnicki, V.↗

NASA NTRS1960

An Approximate Analytical Method for Studying Atmosphere Entry of Vehicles with Modulated Aerodynamic Forces

The dimensionless, transformed, nonlinear differential equation developed in NASA TR R-11 for describing the approximate motion and heating during entry into planetary atmospheres for constant aerodynamic coefficients and vehicle shape has been modified to include entries during which the aerodynamic coefficients and the vehicle shape are varied. The generality of the application of the original equation to vehicles of arbitrary weight, size, and shape and to arbitrary atmospheres is retained. A closed-form solution for the motion, heating, and the variation of drag loading parameter m/C(D)A has been obtained for the case of constant maximum resultant deceleration during nonlifting entries. This solution requires certain simplifying assumptions which do not compromise the accuracy of the results. The closed-form solution has been used to determine the variation of m/C(D)A required to reduce peak decelerations and to broaden the corridor for nonlifting entry into the earth's atmosphere at escape velocity. The attendant heating penalty is also studied.

Levy, Lionel L., Jr.↗

NASA NTRS1972

Systems identification using a modified Newton-Raphson method: A FORTRAN program

A FORTRAN program is offered which computes a maximum likelihood estimate of the parameters of any linear, constant coefficient, state space model. For the case considered, the maximum likelihood estimate can be identical to that which minimizes simultaneously the weighted mean square difference between the computed and measured response of a system and the weighted square of the difference between the estimated and a priori parameter values. A modified Newton-Raphson or quasilinearization method is used to perform the minimization which typically requires several iterations. A starting technique is used which insures convergence for any initial values of the unknown parameters. The program and its operation are described in sufficient detail to enable the user to apply the program to his particular problem with a minimum of difficulty.

Taylor, L. W., Jr.↗

NASA NTRS1974

Optimum three-dimensional atmospheric entry from the analytical solution of Chapman's exact equations

The general solution for the optimum three-dimensional aerodynamic control of a lifting vehicle entering a planetary atmosphere is developed. A set of dimensionless variables, modified Chapman variables, is introduced. The resulting exact equations of motion, referred to as Chapman's exact equations, have the advantage that they are completely free of the physical characteristics of the vehicle. Furthermore, a completely general lift-drag relationship is used in the derivation. The results obtained apply to any type of vehicle of arbitrary weight, dimensions and shape, having an arbitrary drag polar, and entering any planetary atmosphere. The aerodynamic controls chosen are the lift coefficient and the bank angle. General optimum control laws for these controls are developed. Several earlier particular solutions are shown to be special cases of this general result. Results are valid for both free and constrained terminal position.

Busemann, A.↗

NASA NTRS1975

Flight investigation of installation effects on a wedge nozzle installed on an underwing nacelle

A flight research program was conducted using a modified F-106B aircraft with an underwing-nacelle - engine installation to investigate installation effects on a wedge nozzle with retracted shrouds from Mach 0.70 to 1.10. These configurations simulated the subsonic flight geometries of a variable-geometry wedge nozzle design for Mach 2.70 operation. The nozzle was tested with a J85-GE-13 turbojet engine, and data were compared with that of 0.34-scale isolated wind tunnel model. Data are also compared with the flight results of a boattail plug nozzle and a cylindrical nacelle plug nozzle. A favorable installation effect occurred from Mach 0.82 to 0.96 with a nominal 4-percent corrected secondary weight-flow ratio. This favorable effect resulted from changes in pressure forces on the nozzle surfaces. The wedge nozzle gross thrust coefficient was about the same as the boattail nacelle plug nozzle and 2.50 to 1.30 percent higher than the cylindrical nacelle plug nozzle over the subsonic Mach number range.

Johns, A. L.↗

NASA NTRS1988

Analysis and Optimization of Truncated Scarf Nozzles Subject to External Flow Conditions

Results of a calculation of an optimized truncated scarfed nozzle were compared. The truncated scarfed nozzle was designed for an exit Mach number of 6.0, i.e., the Mach number at the last nozzle characteristic is 6.0, with an external flow Mach number of 5.0. The nozzle was designed by the Rao method for optimum thrust nozzles modified for 2-D flow and truncated scarfed nozzle applications. This design was analyzed using a shock-fitting method for 2-D supersonic flows. Excellent agreement was achieved between the design and analysis. Truncation of the lower nozzle wall (cowl) revealed that there is an optimum length for truncating the cowl without degrading the nozzle performance. Truncation of the nozzle cowl past this optimal length should be analyzed in trade-off studies for thrust loss versus gross vehicle weight. Plots of the oblique shock wave equations were also identified which will allow computation of slip line angle, dynamic pressure coefficient, or ambient Mach number for various specific heat ratios.

Shyne, Rickey J.↗

NASA NTRS2011

A Maximum Likelihood Approach to Determine Sensor Radiometric Response Coefficients for NPP VIIRS Reflective Solar Bands

Optical sensors aboard Earth orbiting satellites such as the next generation Visible/Infrared Imager/Radiometer Suite (VIIRS) assume that the sensors radiometric response in the Reflective Solar Bands (RSB) is described by a quadratic polynomial, in relating the aperture spectral radiance to the sensor Digital Number (DN) readout. For VIIRS Flight Unit 1, the coefficients are to be determined before launch by an attenuation method, although the linear coefficient will be further determined on-orbit through observing the Solar Diffuser. In determining the quadratic polynomial coefficients by the attenuation method, a Maximum Likelihood approach is applied in carrying out the least-squares procedure. Crucial to the Maximum Likelihood least-squares procedure is the computation of the weight. The weight not only has a contribution from the noise of the sensor s digital count, with an important contribution from digitization error, but also is affected heavily by the mathematical expression used to predict the value of the dependent variable, because both the independent and the dependent variables contain random noise. In addition, model errors have a major impact on the uncertainties of the coefficients. The Maximum Likelihood approach demonstrates the inadequacy of the attenuation method model with a quadratic polynomial for the retrieved spectral radiance. We show that using the inadequate model dramatically increases the uncertainties of the coefficients. We compute the coefficient values and their uncertainties, considering both measurement and model errors.

Lei, Ning↗

NASA NTRS1976

Toward more environmentally resistant gas turbines - Progress in NASA-Lewis programs

The paper surveys programs for improving the environmental resistance of gas turbine and power system materials to oxidation and hot corrosion. A computer program Corest has been produced which provides an initial method for predicting long-time metal loss using short-time oxidation data. The role of the coefficient of thermal expansion mismatch on oxide spallation is being studied. A paralinear oxidation attack model in conjunction with regression analysis of weight change data has been applied to the study of oxidation and hot corrosion attack of some Ni-Cr-Al system alloys. Oxide-dispersion strengthened alloys based on the Ni-Cr-Al system are being developed. Sodium sulfate formation during turbine combustion is being investigated from a thermodynamic viewpoint.

Lowell, C. E.↗