Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “waveforms”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Integration of paper spray ionization high‐field asymmetric waveform ion mobility spectrometry for forensic applications

Rationale Paper spray ionization (PSI) is an attractive ambient ionization source for mass spectrometry (MS) since it allows the combination of surface sampling and ionization. The minimal sample preparation inherent in this approach greatly reduces the time needed for analysis. However, the ions generated from interfering compounds in the sample and the paper substrate may interfere with the analyte ions. Therefore, the integration of PSI with high‐field asymmetric ion mobility spectrometry (FAIMS) is of significant interest since it should reduce the background ions entering the mass analyzer without complicating the analysis or increasing analysis time. Here we demonstrate the integration of PSI with FAIMS/MS and its potential for analysis of samples of forensic interest. Methods In this work, the parameters that can influence the integration, including sampling and ionization by paper spray, the FAIMS separation of analytes from each other and background interferences, and the length of time that a usable signal can be observed for explosives on paper, were evaluated with the integrated system. Results In the negative ion analysis of 2,4,6‐trinitrotoluene (TNT), pentaerythritol tetranitrate (PETN), octahydro‐1,3,5,7‐tetranitro‐1,3,5,7‐tetrazocine (HMX), and 1,3,5‐trinitroperhydro‐1,3,5‐triazine (RDX), amounts as low as 1 ng on paper were readily observed. The successful positive ion separation of a set of illicit drugs including heroin, methamphetamine, and cocaine was also achieved. In addition, the positive ion analysis of the chemical warfare agent simulants dimethyl methylphosphonate (DMMP) and diisopropyl methylphosphonate (DIMP) was evaluated. Conclusions The integration of PSI‐FAIMS/MS was demonstrated for the analyses of explosives in negative ion mode and for illicit drugs and CW simulants in positive mode. Paper background ions that could interfere with these analyses were separated by FAIMS. The compensation voltage of an ion obtained by FAIMS provided an additional identification parameter to be combined with the mass spectrum for each analyte.

Tsai, Chia‐Wei↗
DOE OSTI2016

Data-Driven, In Situ, Relative Sensor Calibration Based on Waveform Fitting Moment Tensor Inversion

This article presents a deconvolution-based methodology for the relative calibration of acoustic emission sensors. The method uses the observations from multiple acoustic emission arrivals to estimate correction functions that account for instrument response and site effects. The corrections act on the measurements reshaping the wave arrivals, in many cases allowing visible discrimination between compressional and shear phases. The methodology is illustrated with the application on a dataset obtained during the hydraulic fracturing at triaxial stress conditions of a Colton sandstone block. A workflow for the estimation of full moment tensor solutions, including the generation of quality control attributes complements the presentation. The moment tensor solutions display fracture geometries mostly aligned with the main hydraulic fracture’s plane. The style of activation can be associated with an extensive stress regime before breakdown and to a compressional stress regime after breakdown, when the pumps were reversed to withdraw fluid from the block. In conclusion, the source types commonly deviate from the pure double-couple type; however, the deviations are under 30° in the case of opening fractures, and under 20° in the case of closing fractures. Therefore, the acoustic emissions in this experiment are the result of predominantly shearing dislocations.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

Daily and Seasonal Variations of Shallow Seismic Velocities in Southern California From Joint Analysis of H/V Ratios and Autocorrelations of Seismic Waveforms

Establishing a baseline of ongoing secular velocity variations at the subsurface can improve the accuracy of detecting and interpreting short-term velocity changes, and advance the understanding of observed seismic motions and the behavior of subsurface materials. Toward these goals, we develop and apply a deconvolved autocorrelation (DA) method to estimate regional daily and seasonal changes of seismic velocities in southern California. The DA method combines advantages of traditional autocorrelation and Horizontal-to-Vertical Spectral Ratio, and is used to analyze over 10 years of data recorded by 50 stations. The results indicate widespread daily and seasonal changes of up to 10% and 4%, respectively, in the top tens of meters of the crust. The thickness of the surface layer, distance from the coast, and topographic variations are important factors controlling the amplitudes of the resolved velocity variations. The results suggest that changes of soil moisture and thermoelastic strain are likely dominant factors affecting the daily and seasonal variations, respectively. The developed DA method can improve the accuracy and robustness of estimated changes of subsurface materials at other locations.

58 GEOSCIENCES↗
DOE OSTI2014

Current waveform reconstruction from an explosively emissive cathode at a subnanosecond voltage front

We describe the methods of registration and reconstruction of an envelope of explosive electron emission current from the edge of a cylindrical cathode, which provides a picosecond time reference of the emitted electron beam with a subnanosecond voltage front applied to the accelerating gap. Variation of the front steepness allows one to determine the beam onset time in the experiments, where a collector-type current probe can be used. The advanced method of dynamic time domain reflectometry provides exact data on electron beam current rise and track changes in the cathode emission from pulse to pulse with a precision of less than 10 ps.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2016

Optimization of current waveform tailoring for magnetically driven isentropic compression experiments

The Thor pulsed power generator is being developed at Sandia National Laboratories. The design consists of up to 288 decoupled and transit time isolated capacitor-switch units, called “bricks,” that can be individually triggered to achieve a high degree of pulse tailoring for magnetically driven isentropic compression experiments (ICE) [D. B. Reisman et al., Phys. Rev. Spec. Top.–Accel. Beams 18, 090401 (2015)]. The connecting transmission lines are impedance matched to the bricks, allowing the capacitor energy to be efficiently delivered to an ICE strip-line load with peak pressures of over 100 GPa. Thor will drive experiments to explore equation of state, material strength, and phase transition properties of a wide variety of materials. We present an optimization process for producing tailored current pulses, a requirement for many material studies, on the Thor generator. This technique, which is unique to the novel “current-adder” architecture used by Thor, entirely avoids the iterative use of complex circuit models to converge to the desired electrical pulse. We begin with magnetohydrodynamic simulations for a given material to determine its time dependent pressure and thus the desired strip-line load current and voltage. Because the bricks are connected to a central power flow section through transit-time isolated coaxial cables of constant impedance, the brick forward-going pulses are independent of each other. We observe that the desired equivalent forward-going current driving the pulse must be equal to the sum of the individual brick forward-going currents. We find a set of optimal brick delay times by requiring that the L{sub 2} norm of the difference between the brick-sum current and the desired forward-going current be a minimum. We describe the optimization procedure for the Thor design and show results for various materials of interest.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2019

Moving photoacoustic sources: Acoustic waveforms in one, two, and three dimensions and application to trace gas detection

The photoacoustic effect is governed by a wave equation with a source term proportional to the time derivative of the optical heat deposition per unit volume and time. Although the typical configuration for generation of the photoacoustic effect makes use of pulsed or amplitude modulated optical beams, the form of the source term in the wave equation indicates that a continuous optical source moving in an absorbing medium is capable of sound generation as well. Here, the properties of simple sources moving in one, two, and three space dimensions are reviewed. The salient feature of sources moving in one-dimension at sound speed is that the amplitude of the acoustic wave increases with time without bound according to linear acoustics. Finally, two schemes, one in the time-domain and the other in the frequency-domain, that take advantage of this principle for increasing the sensitivity of trace gas detection are reviewed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2014

Full waveform inversion for time-distance helioseismology

Inferring interior properties of the Sun from photospheric measurements of the seismic wavefield constitutes the helioseismic inverse problem. Deviations in seismic measurements (such as wave travel times) from their fiducial values estimated for a given model of the solar interior imply that the model is inaccurate. Contemporary inversions in local helioseismology assume that properties of the solar interior are linearly related to measured travel-time deviations. It is widely known, however, that this assumption is invalid for sunspots and active regions and is likely for supergranular flows. Here, we introduce nonlinear optimization, executed iteratively, as a means of inverting for the subsurface structure of large-amplitude perturbations. Defining the penalty functional as the L {sub 2} norm of wave travel-time deviations, we compute the total misfit gradient of this functional with respect to the relevant model parameters at each iteration around the corresponding model. The model is successively improved using either steepest descent, conjugate gradient, or the quasi-Newton limited-memory Broyden-Fletcher-Goldfarb-Shanno algorithm. Performing nonlinear iterations requires privileging pixels (such as those in the near field of the scatterer), a practice that is not compliant with the standard assumption of translational invariance. Measurements for these inversions, although similar in principle to those used in time-distance helioseismology, require some retooling. For the sake of simplicity in illustrating the method, we consider a two-dimensional inverse problem with only a sound-speed perturbation.

79 ASTRONOMY AND ASTROPHYSICS↗