Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “wave prediction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Low-frequency electromagnetic waves driven by gyrotropic gyrating ion beams

The origin of left- and right-hand-polarized low-frequency waves in space plasmas is analyzed. It has been shown that a gyrotropic gyrating ion beam, a ring in velocity space, can excite electromagnetic modes in the plasma near the beam gyrofrequency. It excites left-hand-polarized shear Alfven waves and their harmonics via the coupling of Alfven modes with the beam modes. It can also excite right-hand-polarized fast-mode magnetosonic waves and their harmonics as well. The excitation is possible for beam ions heavier than the plasma ions. The growth rate varies as one-third power of the beam density and decreases with the angle of wave propagation with respect to the ambient magnetic field. The nonlocality has a stabilizing effect on the instability. The predicted values of the wave frequencies compare reasonably well with those observed in satellite data.

Sharma, O. P.↗

Energetic electrons and plasma waves associated with a solar type III radio burst

Detailed in situ observations from the ISEE 3 spacecraft of energetic electrons, plasma waves, and radio emission for the type II solar radio burst of February 17, 1979, are presented. The reduced, one-dimensional electron distribution function is constructed as a function of time. Since the faster electrons arrive before the slower ones, a bump on tail distribution forms which is unstable to the growth of Langmuir waves. The plasma wave growth computed from the distribution function agrees well with the observed onset of the Langmuir waves, and there is qualitative agreement between variations in the plasma wave levels and in the development of regions of positive slope in the function. The evolution of the function, however, predicts far higher plasma wave levels than those observed. The maximum levels observed are approximately equal to the threshold for nonlinear wave processes, such as oscillation two-stream instability and soliton collapse.

Lin, R. P.↗

Development and Validation of a Multidisciplinary Tool for Accurate and Efficient Rotorcraft Noise Prediction (MUTE)

A physics-based, systematically coupled, multidisciplinary prediction tool (MUTE) for rotorcraft noise was developed and validated with a wide range of flight configurations and conditions. MUTE is an aggregation of multidisciplinary computational tools that accurately and efficiently model the physics of the source of rotorcraft noise, and predict the noise at far-field observer locations. It uses systematic coupling approaches among multiple disciplines including Computational Fluid Dynamics (CFD), Computational Structural Dynamics (CSD), and high fidelity acoustics. Within MUTE, advanced high-order CFD tools are used around the rotor blade to predict the transonic flow (shock wave) effects, which generate the high-speed impulsive noise. Predictions of the blade-vortex interaction noise in low speed flight are also improved by using the Particle Vortex Transport Method (PVTM), which preserves the wake flow details required for blade/wake and fuselage/wake interactions. The accuracy of the source noise prediction is further improved by utilizing a coupling approach between CFD and CSD, so that the effects of key structural dynamics, elastic blade deformations, and trim solutions are correctly represented in the analysis. The blade loading information and/or the flow field parameters around the rotor blade predicted by the CFD/CSD coupling approach are used to predict the acoustic signatures at far-field observer locations with a high-fidelity noise propagation code (WOPWOP3). The predicted results from the MUTE tool for rotor blade aerodynamic loading and far-field acoustic signatures are compared and validated with a variation of experimental data sets, such as UH60-A data, DNW test data and HART II test data.

Liu, Yi↗

Aerodynamic Modeling of Transonic Aircraft Using Vortex Lattice Coupled with Transonic Small Disturbance for Conceptual Design

The need to rapidly scan large design spaces during conceptual design calls for computationally inexpensive tools such as the vortex lattice method (VLM). Although some VLM tools, such as Vorview have been extended to model fully-supersonic flow, VLM solutions are typically limited to inviscid, subcritical flow regimes. Many transport aircraft operate at transonic speeds, which limits the applicability of VLM for such applications. This paper presents a novel approach to correct three-dimensional VLM through coupling of two-dimensional transonic small disturbance (TSD) solutions along the span of an aircraft wing in order to accurately predict transonic aerodynamic loading and wave drag for transport aircraft. The approach is extended to predict flow separation and capture the attenuation of aerodynamic forces due to boundary layer viscosity by coupling the TSD solver with an integral boundary layer (IBL) model. The modeling framework is applied to the NASA General Transport Model (GTM) integrated with a novel control surface known as the Variable Camber Continuous Trailing Edge Flap (VCCTEF).

Transonic Small Disturbance↗

The NANOGrav 11 yr data set: Evolution of Gravitational-wave Background Statistics

An ensemble of inspiraling supermassive black hole binaries should produce a stochastic background of very low frequency gravitational waves. This stochastic background is predicted to be a power law, with a gravitational-wave strain spectral index of −2/3, and it should be detectable by a network of precisely timed millisecond pulsars, widely distributed on the sky. This paper reports a new “time slicing” analysis of the 11 yr data release from the North American Nanohertz Observatory for Gravitational Waves (NANOGrav) using 34 millisecond pulsars. Methods to flag potential “false-positive” signatures are developed, including techniques to identify responsible pulsars. Mitigation strategies are then presented. We demonstrate how an incorrect noise model can lead to spurious signals, and we show how independently modeling noise across 30 Fourier components, spanning NANOGrav’s frequency range, effectively diagnoses and absorbs the excess power in gravitational-wave searches. This results in a nominal, and expected, progression of our gravitational-wave statistics. Additionally, we show that the first interstellar medium event in PSR J1713+0747 pollutes the common red-noise process with low spectral index noise, and we use a tailored noise model to remove these effects.

J S Hazboun↗

Empirical Model Development for Predicting Shock Response on Composite Materials Subjected to Pyroshock Loading: Appendices - Volume 2, Part 1

The NASA Engineering and Safety Center (NESC) received a request to develop an analysis model based on both frequency response and wave propagation analyses for predicting shock response spectrum (SRS) on composite materials subjected to pyroshock loading. The model would account for near-field environment (approximately 9 inches from the source) dominated by direct wave propagation, mid-field environment (approximately 2 feet from the source) characterized by wave propagation and structural resonances, and far-field environment dominated by lower frequency bending waves in the structure. This document contains appendices to the Volume I report.

Gentz, Steven J.↗

Sea level and tsunamis

Spacecraft and satellite observations by high resolution optical photography or radar imagery to obtain information about wave coupling mechanism for predicting height of tsunamis

SATELLITE-BORNE RADAR↗

Sensitivity of LFC techniques in the non-linear regime

For all the Laminar Flow Control (LFC) techniques examined, finite-amplitude effects are destabilizing, i.e., finite-amplitude 2-D Tollmien-Schlichting (TS) waves grow faster than predicted by linear theory. It was also found, in direct contrast to the results from linear theory for low-amplitude waves, that temperature fluctuations exert a further destabilizing influence on finite amplitude 2-D TS waves. The controlled boundary layers are, of course, subject to intense 3-D secondary instabilities. The instantaneous growth rates of both the fundamental and subharmonic instabilities are strongly tied to the amplitude of the primary 2-D wave. The principal finite-amplitude effects upon the 3-D secondary instabilities occur through the faster growth of the 2-D waves.

Bushnell, Dennis M.↗

An improved numerical model for wave rotor design and analysis

A numerical model has been developed which can predict both the unsteady flows within a wave rotor and the steady averaged flows in the ports. The model is based on the assumptions of one-dimensional, unsteady, and perfect gas flow. Besides the dominant wave behavior, it is also capable of predicting the effects of finite tube opening time, leakage from the tube ends, and viscosity. The relative simplicity of the model makes it useful for design, optimization, and analysis of wave rotor cycles for any application. This paper discusses some details of the model and presents comparisons between the model and two laboratory wave rotor experiments.

Paxson, Daniel E.↗

An improved numerical model for wave rotor design and analysis

A numerical model has been developed which can predict both the unsteady flows within a wave rotor and the steady averaged flows in the ports. The model is based on the assumptions of one-dimensional, unsteady, and perfect gas flow. Besides the dominant wave behavior, it is also capable of predicting the effects of finite tube opening time, leakage from the tube ends, and viscosity. The relative simplicity of the model makes it useful for design, optimization, and analysis of wave rotor cycles for any application. This paper discusses some details of the model and presents comparisons between the model and two laboratory wave rotor experiments.

Paxson, Daniel E.↗

Scattering of sound waves by a compressible vortex

Scattering of plane sound waves by a compressible vortex is investigated by direct computation of the two-dimensional Navier-Stokes equations. Nonreflecting boundary conditions are utilized, and their accuracy is established by comparing results on different sized domains. Scattered waves are directly measured from the computations. The resulting amplitude and directivity pattern of the scattered waves is discussed, and compared to various theoretical predictions. For compact vortices (zero circulation), the scattered waves directly computed are in good agreement with predictions based on an acoustic analogy. Strong scattering at about + or - 30 degrees from the direction of incident wave propagation is observed. Back scattering is an order of magnitude smaller than forward scattering. For vortices with finite circulation refraction of the sound by the mean flow field outside the vortex core is found to be important in determining the amplitude and directivity of the scattered wave field.

Colonius, Tim↗

The Impact of SN1987A with its Circumstellar Ring

Following is final report on the study "The Impact of SN1987A with its Circumstellar Ring", which is now complete. In 1994, it was predicted that the blast wave from SN1987A would strike the circumstellar ring in AD1999+/-3, and that the ring would brighten by several hundreds optically as the shock entered the ring. It was also predicted that the emission lines from the shocked ring would have linewidths of a few hundred km/s. Today, we see a "hot spot" on the ring that first appeared in Hubble Space Telescope (HST) images in 1995 and has doubled in brightness between August 1997 and February 1998. Moreover, spectra from STIS show that the emission lines from the hot spot have widths and blue shifts of order 200 km/s, just as we predicted in 1994. Our guess of 1999+/-3 for the impact time was lucky, because we assumed that the hot gas in the bubble between the supernova and the ring had a low density (approximately 10 cm(exp -3)). But it was pointed out that the ROSAT observations of soft X-rays from SN 1987A implied that the intervening gas had a higher density, (approximately 100 cm(exp -3)), which would delay the impact until ca. 2007. Others developed hydrodynamic models to fit the ROSAT X-ray emission spectrum and came to the same conclusion. But these models were oversimplified in that they assumed that the ring was perfectly round. Now we see clearly that the hot spot is a peninsula that protrudes inward from the ring -- the first spot on the ring to be struck by the blast wave. No doubt there are other protrusions on the ring, which we may expect to light up in the next few years until they finally merge to set the entire ring ablaze, probably within 5 - 10 years. It was also predicted that the X-ray emission must be accompanied by optical and ultraviolet emission from atoms in the supernova debris and in the circumstellar gas that cross the reverse shock and the blast wave, respectively, and that the Lyman-alpha and NV emission lines should be bright enough to see with the STIS.

McCray, Richard↗

Unsteady aerodynamics of conventional and supercritical airfoils

The unsteady aerodynamics of a conventional and a supercritical airfoil are compared by examining measured chordwise unsteady pressure time-histories from four selected flow conditions. Although an oscillating supercritical airfoil excites more harmonics, the strength of the airfoil's shock wave is the more important parameter governing the complexity of the unsteady flow. Whether they are conventional or supercritical, airfoils that support weak shock waves induce unsteady loads that are qualitatively predictable with classical theories; flows with strong shock waves are sensitive to details of the shock-wave and boundary-layer interaction and cannot be adequately predicted.

Davis, S. S.↗

Satellite formation in capillary jet breakup

Computations of finite-amplitude, spatially periodic wave growth on a cylindrical jet have been carried out using a boundary integral method. The initial wave growth is in agreement with Rayleigh's linear theory. When followed to completion these waves pinch off large drops separated by smaller satellite drops (spherules) that decrease in size with decreasing wavelength. The computed sizes of both drops and satellites agree with experiment. It is found that satellites will form for all unstable wave numbers. The small satellites that are computed at wave numbers near the critical wave number were not predicted by near-linear analysis but are observed in experimental photographs of jet breakup. Computation of the collapse of elongated satellites shows short waves propagating on their surfaces.

Mansour, Nagi N.↗

The Stability of Radiatively Cooling Jets I. Linear Analysis

The results of a spatial stability analysis of a two-dimensional slab jet, in which optically thin radiative cooling is dynamically important, are presented. We study both magnetized and unmagnetized jets at external Mach numbers of 5 and 20. We model the cooling rate by using two different cooling curves: one appropriate to interstellar gas, and the other to photoionized gas of reduced metallicity. Thus, our results will be applicable to both protostellar (Herbig-Haro) jets and optical jets from active galactic nuclei. We present analytical solutions to the dispersion relations in useful limits and solve the dispersion relations numerically over a broad range of perturbation frequencies. We find that the growth rates and wavelengths of the unstable Kelvin-Helmholtz (K-H) modes are significantly different from the adiabatic limit, and that the form of the cooling function strongly affects the results. In particular, if the cooling curve is a steep function of temperature in the neighborhood of the equilibrium state, then the growth of K-H modes is reduced relative to the adiabatic jet. On the other hand, if the cooling curve is a shallow function of temperature, then the growth of K-H modes can be enhanced relative to the adiabatic jet by the increase in cooling relative to heating in overdense regions. Inclusion of a dynamically important magnetic field does not strongly modify the important differences between an adiabatic jet and a cooling jet, provided the jet is highly supermagnetosonic and not magnetic pressure-dominated. In the latter case, the unstable modes behave more like the transmagnetosonic magnetic pressure-dominated adiabatic limit. We also plot fluid displacement surfaces associated with the various waves in a cooling jet in order to predict the structures that might arise in the nonlinear regime. This analysis predicts that low-frequency surface waves and the lowest order body modes will be the most effective at producing observable features in the jet.

Hardee, Philip E.↗

Wave Rotor Research and Technology Development

Wave rotor technology offers the potential to increase the performance of gas turbine engines significantly, within the constraints imposed by current material temperature limits. The wave rotor research at the NASA Lewis Research Center is a three-element effort: 1) Development of design and analysis tools to accurately predict the performance of wave rotor components; 2) Experiments to characterize component performance; 3) System integration studies to evaluate the effect of wave rotor topping on the gas turbine engine system.

Welch, Gerard E.↗

Steepened magnetosonic waves in the high beta plasma surrounding Comet Giacobini-Zinner

Studies of intense hydromagnetic waves at Giacobini-Zinner are extended to investigate the mode and direction of wave propagation. Simultaneous high-resolution measurements of electron density fluctuations demonstrate that long period waves propagate in the magnetosonic mode. Principal axis analyses of the long period waves and accompanying partial rotations show that the sum of the wave phase rotations is 360 deg, indicating that both are parts of the same wave oscillation. The time sequence of the steepened waveforms observed by ICE shows that the waves must propagate towards the Sun with Cph less than Vsw. Observations are consistent with wave generation by resonant ion ring or ion beam instability which predicts right-hand polarized waves propagating in the ion beam (solar) direction. The large amplitudes and small scale sizes of the cometary waves suggest that rapid pitch-angle scattering and energy transfer with energetic ions should occur. Since the waves are highly compressive, first-order Fermi acceleration is forecast.

Tsurutani, B. T.↗

Alfvenic heating of the chromosphere and corona

The behavior in the chromosphere of Alfven waves propagating on closed magnetic field lines (e.g. coronal loops) is considered. It is found that the observed chromospheric nonthermal velocities are consistent with the predicted behavior of Alfven waves. If they are indeed Alfven waves, then the observed motions imply energy fluxes which are sufficient to heat the corona and chromosphere. It is further shown that the observed motions can reproduce the observed chromospheric heating, if the heating occurs via a Kolmogoroff cascade. But a definitive analysis will require a self-consistent treatment of nonlinear effects.

Hollweg, J. V.↗