Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “wake modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Evaluation of the discrete vortex wake cross flow model using vector computers. Part 1: Theory and application

The current program had the objective to modify a discrete vortex wake method to efficiently compute the aerodynamic forces and moments on high fineness ratio bodies (f approximately 10.0). The approach is to increase computational efficiency by structuring the program to take advantage of new computer vector software and by developing new algorithms when vector software can not efficiently be used. An efficient program was written and substantial savings achieved. Several test cases were run for fineness ratios up to f = 16.0 and angles of attack up to 50 degrees.

Source record↗

Wake Vortex Prediction Models for Decay and Transport Within Stratified Environments

This paper proposes two simple models to predict vortex transport and decay. The models are determined empirically from results of three-dimensional large eddy simulations, and are applicable to wake vortices out of ground effect and not subjected to environmental winds. The results, from the large eddy simulations assume a range of ambient turbulence and stratification levels. The models and the results from the large eddy simulations support the hypothesis that the decay of the vortex hazard is decoupled from its change in descent rate.

Switzer, George F.↗

Medium-Fidelity CFD Modeling of Multicopter Wakes for Airborne Sensor Measurements

A steady-state multicopter simulation capability leveraging automated Cartesian grid generation and a blade element source term rotor model was used to investigate multi-rotor aerodynamics in and out of ground effect. Simulations demonstrated that this model is able to predict reasonably accurate thrust in ground effect for both single and multiple propeller cases. The method yielded accurate lift and drag predictions for a commercial quadcopter when compared to recent wind tunnel test data. This aircraft was then simulated in a variety of flight conditions, including both hover and edgewise forward flight, to determine if generalized guidelines for airborne sensor placement could be developed. Velocity perturbation magnitudes showed large regions of affected air upstream of the vehicle at low speeds, which contracted as the vehicle’s speed was increased. Placing the sensors more than one characteristic length ahead of or above the aircraft reduces errors from rotor-induced flow at higher speeds. For low-speed forward flight, the entrainment of flow into the propeller wakes introduces significant flow turning above the aircraft, suggesting that a forward location, with more moderate perturbations, could be advantageous for these conditions.

ARMD↗

A generalized framework for reduced-order modeling of a wind turbine wake

A reduced-order model for a wind turbine wake is sought from large eddy simulation data. Fluctuating velocity fields are combined in the correlation tensor to form the kernel of the proper orthogonal decomposition (POD). Proper orthogonal decomposition modes resulting from the decomposition represent the spatially coherent turbulence structures in the wind turbine wake; eigenvalues delineate the relative amount of turbulent kinetic energy associated with each mode. Back-projecting the POD modes onto the velocity snapshots produces dynamic coefficients that express the amplitude of each mode in time. A reduced-order model of the wind turbine wake (wakeROM) is defined through a series of polynomial parameters that quantify mode interaction and the evolution of each POD mode coefficients. The resulting system of ordinary differential equations models the wind turbine wake composed only of the large-scale turbulent dynamics identified by the POD. Tikhonov regularization is used to recalibrate the dynamical system by adding additional constraints to the minimization seeking polynomial parameters, reducing error in the modeled mode coefficients. The wakeROM is periodically reinitialized with new initial conditions found by relating the incoming turbulent velocity to the POD mode coefficients through a series of open-loop transfer functions. The wakeROM reproduces mode coefficients to within 25.2%, quantified through the normalized root-mean-square error. Furthermore, a high-level view of the modeling approach is provided as a platform to discuss promising research directions, alternate processes that could benefit stability and efficiency, and desired extensions of the wakeROM.

17 WIND ENERGY↗

Wake Structure Induced by Seal Whisker: Effects of Angle of Incidence

Seal whiskers have been found to produce unique wake flow structures that minimize self-induced vibration and reduce drag. The cause of these wake features are due to the peculiar three-dimensional morphology of the whisker surface. The whisker can be defined as an elliptical cross section with variation in the major and minor axis of the ellipse along the length of the whisker as well as rotation of the elliptical plane with respect to the whisker axis, angle of incidence. While the effects of several dominant parameters of the whisker morphology have been studied, the effect of the rotation of the elliptical plane has not been well understood. This paper will examine the influence of the angle of incidence on the wake flow structure through series of water channel studies. Several models of whisker-like geometries will be tested which isolate the rotation angle as the only variation between models. The wake structure behind each seal whisker model will be measured through particle image velocimetry (PIV). The different models’ wake structures will be compared identifying the effect of angle of incidence on the wake structure. Angle of incidence was found to influence the wake structure through reorganization of velocity patterns, reduction of recovery length and modification of magnitude of Tu. These results help provide a more complete understanding of the seal whisker geometry relationship to wake structure and can provide insight into design practices for application of whisker geometery to various engineering problems.

vortex induced vibration↗

Numerical Modeling Studies of Wake Vortex Transport and Evolution Within the Planetary Boundary Layer

In support of the wake vortex effect of the Terminal Area Productivity program, we have put forward four tasks to be accomplished in our proposal. The first task is validation of two-dimensional wake vortex-turbulence interaction. The second task is investigation of three-dimensional interaction between wake vortices and atmospheric boundary layer (ABL) turbulence. The third task is ABL studies. The, fourth task is addition of a Klemp-Durran condition at the top boundary for TASS model. The accomplishment of these tasks will increase our understanding of the dynamics of wake vortex and improve forecasting systems responsible for air safety and efficiency. The first two tasks include following three parts: (a) Determine significant length scale for vortex decay and transport, especially the length scales associated with the onset of Crow instability (Crow, 1970); (b) Study the effects of atmospheric turbulence on the decay of the wake vortices; and (c) Determine the relationships between decay rate, transport properties and atmospheric parameters based on large eddy simulation (LES) results and the observational data. These parameters may include turbulence kinetic energy, dissipation rate, wind shear and atmospheric stratification. The ABL studies cover LES modeling of turbulence structure within planetary boundary layer under transition and stable stratification conditions. Evidences have shown that the turbulence in the stable boundary layer can be highly intermittent and the length scales of eddies are very small compared to those in convective case. We proposed to develop a nesting grid mesh scheme and a modified Klemp-Durran conditions (Klemp and Wilhelmson, 1978) at the top boundary for TASS model to simulate planetary boundary layer under stable stratification conditions. During the past year, our group has made great efforts to carry out the above mentioned four tasks simultaneously. The work accomplished in the last year will be described in the next section.

Lin, Yuh-Lang↗

Does a 'two-stream' flow model apply to wakes of large bodies in space

Structural patterns of ion and electron currents observed on the wake axes of the Ariel I and the Gemini 10 space vehicles are reexamined, together with relevant theoretical and laboratory 'simulation' studies. Some insight into existing in situ data is provided. The possibility that 'converging-stream' models describe structural features of current enhancements in the wake region of large spacecraft is discussed.

Samir, U.↗

Analysis of experimental observations of electron temperatures in the near wake of a model in a laboratory-simulated solar wind plasma

In the present paper, the results are presented of the first laboratory experiments in a high-energy plasma which investigate the electron temperature Te in the body wake. A large number of Te samples in the very near- and near-wake regions downstream from a conducting body are employed. The obtained results are compared with the experimental findings of Oran et al. (1975), Stone (1981), and others. The findings are discussed in the more general context of theoretical studies and of other relevant considerations. Attention is also given to the possible relevance of the results to the maintenance of the nightside ionosphere of Venus, and suggestions are made regarding some specific spacecraft observations which should be carried out using the Pioneer Venus orbiter.

Intriligator, D. S.↗

Comparison of calculated and measured model rotor loading and wake geometry

The calculated blade bound circulation and wake geometry are compared with measured results for a model helicopter rotor in hover and forward flight. Hover results are presented for rectangular tip and ogee tip planform blades. The correlation is quite good when the measured wake geometry characteristics are used in the analysis. Available prescribed wake geometry models are found to give fair predictions of the loading, but they do not produce a reasonable prediction of the induced power. Forward flight results are presented for twisted and untwisted blades. Fair correlation between measurements and calculations is found for the bound circulation distribution on the advancing side. The tip vortex geometry in the vicinity of the advancing blade in forward flight was predicted well by the free wake calculation used, although the wake geometry did not have a significant influence on the calculated loading and performance for the cases considered.

Johnson, W.↗

Development and application of a method for predicting rotor free wake positions and resulting rotor blade air loads. Volume 1: Model and results

Rotor wake geometries are predicted by a process similar to the startup of a rotor in a free stream. An array of discrete trailing and shed vortices is generated with vortex strengths corresponding to stepwise radial and azimuthal blade circulations. The array of shed and trailing vortices is limited to an arbitrary number of azimuthal steps behind each blade. The remainder of the wake model of each blade is an arbitrary number of trailing vortices. Vortex element end points were allowed to be transported by the resultant velocity of the free stream and vortex-induced velocities. Wake geometry, wake flow, and wake-induced velocity influence coefficients are generated by this program for use in the blade loads portion of the calculations. Blade loads computations include the effects of nonuniform inflow due to a free wake, nonlinear airfoil characteristics, and response of flexible blades to the applied loads. Computed wake flows and blade loads are compared with experimentally measured data. Predicted blade loads, response and shears and moments are obtained for a model rotor system having two independent rotors. The effects of advance ratio, vertical separation of rotors, different blade radius ratios, and different azimuthal spacing of the blades of one rotor with respect to the other are investigated.

Sadler, S. G.↗

Control-Oriented Model for Secondary Effects of Wake Steering

This paper presents a model to incorporate the secondary effects of wake steering in large arrays of turbines. Previous models have focused on the aerodynamic interaction of wake steering between two turbines. The model proposed in this paper builds on these models to include yaw-induced wake recovery and secondary steering seen in large arrays of turbines when wake steering is performed. Turbines operating in yaw-misaligned conditions generate counter-rotating vortices that entrain momentum and contribute to the deformation and deflection of the wake at downstream turbines. Rows of turbines can compound the effects of wake steering that benefit turbines far downstream. This model quantifies these effects and demonstrates that wake steering has greater potential to increase the performance of a wind farm due to these counter-rotating vortices especially for large rows of turbines. This is validated using numerous large-eddy simulations for three-turbine, five-turbine, and wind farm scenarios.

17 WIND ENERGY↗

Numerical Modeling Studies of Wake Vortex Transport and Evolution Within the Planetary Boundary Layer

The fundamental objective of this research is study behavior of aircraft wake vortices within atmospheric boundary layer (ABL) in support of developing the system, Aircraft VOrtex Spacing System (AVOSS), under NASA's Terminal Area Productivity (TAR) program that will control aircraft spacing within the narrow approach corridors of airports. The purpose of the AVOSS system is to increase airport capacity by providing a safe reduction in separation of aircraft compared to the now-existing flight rules. In our first funding period (7 January 19994 - 6 April 1997), we have accomplished extensive model development and validation of ABL simulations. Using the validated model, in our second funding period (7 April 1997 - 6 April 2000) we have investigated the effects of ambient atmospheric turbulence on vortex decay and descent, Crow instability, and wake vortex interaction with the ground. Recognizing the crucial influence of ABL turbulence on wake vortex behavior, we have also developed a software generating vertical profiles of turbulent kinetic energy (TKE) or energy dissipation rate (EDR), which are, in turn, used as input data in the AVOSS prediction algorithms.

Lin, Yuh-Lang↗

Vortex Wake Geometry of a Model Tilt Rotor in Forward Flight

The vortex wake trajectory from one rotor of a 0.25-scale V-22 tiltrotor model was measured for four test conditions in the NASA Ames 40- by 80-Foot Wind Tunnel. Vortex wake images were acquired using a laser light sheet and video camera. Wake trajectories were constructed by extracting vortex positions from the video images. Wake trajectories were also calculated using the comprehensive analysis CAMRAD II. Measured and calculated wake geometries exhibit similar trends when advance ratio is varied at fixed thrust or when thrust is varied at fixed advance ratio.

Yamauchi, G. K.↗

FAST.Farm [SWR-17-56]

FAST.Farm is a multi-physics engineering tool for predicting the performance and loads of wind turbines within a wind farm. FAST.Farm uses FAST to solve the aero-hydro-servo-elastic dynamics of an individual turbine, but adds additional physics for wind farm-wide ambient wind in the atmospheric boundary layer; a wind-farm super controller; and wake deficits, advection, deflection, meandering, and merging. FAST.Farm is based on the principles of the Dynamic Wake Meandering (DWM) model—including passive tracer modeling of wake meandering—but addresses many of the limitations of previous DWM limitations. FAST.Farm maintains a low computational cost to the often highly iterative and probabilistic design process. Applications of FAST.Farm include reducing wind farm underperformance and loads uncertainty, developing wind farm controls to enhance operation, optimizing wind farm siting and topology, and innovating the design of wind turbines for the wind-farm environment.

Jonkman, Jason↗

A computationally fast one-dimensional diffusion-photochemistry model of SST wakes

A computational technique applicable to analysis of supersonic transport (SST) wake photochemistry and diffusion is presented. Sensitivity studies of SST effluent effects upon ozone depletion are facilitated by the computational rapidity of the method. The article compares results from other studies and predictions of some variables related to global NOx input. Results indicate that the NO/NO2 ratio in an SST wake at photochemical equilibrium is a sensitive function of photolysis rates.

Matloff, G. L.↗

Experimental modelling of satellite wakes in auroral arcs

Preliminary measurements have been made in a large laboratory discharge device configured to simulate plasma wake phenomena. A large relative electron drift impinging on a nonconducting disc gives rise to a perturbed density struture downstream, as well as a reflected beam of electrons upstream. Velocity distribution measurements were made using a novel energy analyzer with angular resolution.

Wild, N.↗