Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “volatilization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Nitrogen Trifluoride-Based Fluoride- Volatility Separations Process: Initial Studies

This document describes the results of our investigations on the potential use of nitrogen trifluoride as the fluorinating and oxidizing agent in fluoride volatility-based used nuclear fuel reprocessing. The conceptual process uses differences in reaction temperatures between nitrogen trifluoride and fuel constituents that produce volatile fluorides to achieve separations and recover valuable constituents. We provide results from our thermodynamic evaluations, thermo-analytical experiments, kinetic models, and provide a preliminary process flowsheet. The evaluations found that nitrogen trifluoride can effectively produce volatile fluorides at different temperatures dependent on the fuel constituent.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Position Paper on Practicable Performance Criteria for the Removal Efficiency of Volatile Radionuclides

As a result of fuel reprocessing, volatile radionuclides may be released from the facility stack if no processes are put in place to remove them. The radionuclides that are of concern in this document are 3 H, 14 C, 85 Kr, and 129 I. The question we attempted to answer is how efficient must this removal process be for each of these radionuclides? To answer this question, we examined the three regulations that may impact the degree to which these radionuclides must be reduced before process gases can be released from the facility. These regulations are 40 CFR 61 (EPA 2010a), 40 CFR 190(EPA 2010b), and 10 CFR 20 (NRC 2012). These regulations apply to the total radionuclide release and to a particular organ - the thyroid. Because these doses can be divided amongst all the radionuclides in different ways and even within the four radionuclides in question, we provided several cases. We first looked at the inventories for these radionuclides for three fuel types (PWR UOX, PWR MOX, and AHTGR), several burn-up values, and time out of reactor extending to 200 y. We calculated doses to the maximum exposed individual (MEI) with the EPA code CAP-88 (Rosnick 1992). Finally, we looked at two dose cases. Allocating all of the allowable dose to be used by the volatile radionuclides is one case, but, perhaps, unrealistic. In lieu of this, we arbitrarily selected a value of 10% of the allowable dose to be assigned to the volatile radionuclides. We calculated the required decontamination factors (DFs) for both of these cases, including the case for the thyroid dose for which 14 C and 129 I were the main contributors. With respect to 129 I doses, we found that the highest dose was calculated with iodine as a fine particulate. The dose scaled as the fraction of the total 129 I that was particulate. Therefore, we assumed for all of our calculations that 100% of the 129 I was particulate and allow the user of the results given here to scale our calculated doses to their needs.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Soil Samplers: New Techniques for Subsurface Sampling for Volatile Organic Compounds

Soil sampling techniques for volatile organic analysis must be designed to minimize loss of volatile organic compounds (VOCs) from the soil that is being sampled. Preventing VOC loss from soil cores that are collected from the subsurface and brought to the surface for subsampling is often difficult. Subsurface bulk sample retrieval systems are designed to obtain intact cylindrical cores of soil ranging anywhere from one to four inches in diameter, and one to several feet in length. The current technique that is used to subsample these soil cores for VOC analysis is to expose a horizontal section of the soil core to the atmosphere; screen the exposed soil using a photoionization detector (PID) or other appropriate device to locate contamination in the soil core; and use a hand-operated coring tool to collect samples from the exposed soil for analysis. Because the soil core can be exposed to the atmosphere for a considerable length of time during screening and sample collection, the current sub-sampling technique provides opportunity for VOCs to be lost from the soil. This report describes three alternative techniques from the current technique for screening and collecting soil samples from subsurface soil cores for VOC analysis and field testing that has been done to evaluate the techniques. Based on the results of the field testing, ASTM D4547, Standard Guide for Sampling Waste and Soils for Volatile Organic Compounds, was revised to include information about the new techniques.

54 ENVIRONMENTAL SCIENCES↗

A New Field Instrument for Leaf Volatiles Reveals an Unexpected Vertical Profile of Isoprenoid Emission Capacities in a Tropical Forest

Both plant physiology and atmospheric chemistry are substantially altered by the emission of volatile isoprenoids (VI), such as isoprene and monoterpenes, from plant leaves. Yet, since gaining scientific attention in the 1950’s, empirical research on leaf VI has been largely confined to laboratory experiments and atmospheric observations. Here, we introduce a new field instrument designed to bridge the scales from leaf to atmosphere, by enabling precision VI detection in real time from plants in their natural ecological setting. With a field campaign in the Brazilian Amazon, we reveal an unexpected distribution of leaf emission capacities (EC) across the vertical axis of the forest canopy, with EC peaking in the mid-canopy instead of the sun-exposed canopy surface, and moderately high emissions occurring in understory specialist species. Compared to the simple interpretation that VI protect leaves from heat stress at the hot canopy surface, our results encourage a more nuanced view of the adaptive role of VI in plants. We infer that forest emissions to the atmosphere depend on the dynamic microenvironments imposed by canopy structure, and not simply on canopy surface conditions. We provide a new emissions inventory from 52 tropical tree species, revealing moderate consistency in EC within taxonomic groups. We highlight priorities in leaf volatiles research that require field-portable detection systems. Our self-contained, portable instrument provides real-time detection and live measurement feedback with precision and detection limits better than 0.5 nmol VI m -2 leaf s -1 . We call the instrument ‘PORCO’ based on the gas detection method: photoionization of organic compounds. We provide a thorough validation of PORCO and demonstrate its capacity to detect ecologically driven variation in leaf emission rates and thus accelerate a nascent field of science: the ecology and ecophysiology of plant volatiles.

54 ENVIRONMENTAL SCIENCES↗

Green Leaf Volatile Emissions during High Temperature and Drought Stress in a Central Amazon Rainforest

Prolonged drought stress combined with high leaf temperatures can induce programmed leaf senescence involving lipid peroxidation, and the loss of net carbon assimilation during early stages of tree mortality. Periodic droughts are known to induce widespread tree mortality in the Amazon rainforest, but little is known about the role of lipid peroxidation during drought-induced leaf senescence. In this study, we present observations of green leaf volatile (GLV) emissions during membrane peroxidation processes associated with the combined effects of high leaf temperatures and drought-induced leaf senescence from individual detached leaves and a rainforest ecosystem in the central Amazon. Temperature-dependent leaf emissions of volatile terpenoids were observed during the morning, and together with transpiration and net photosynthesis, showed a post-midday depression. This post-midday depression was associated with a stimulation of C 5 and C 6 GLV emissions, which continued to increase throughout the late afternoon in a temperature-independent fashion. During the 2010 drought in the Amazon Basin, which resulted in widespread tree mortality, green leaf volatile emissions (C 6 GLVs) were observed to build up within the forest canopy atmosphere, likely associated with high leaf temperatures and enhanced drought-induced leaf senescence processes. The results suggest that observations of GLVs in the tropical boundary layer could be used as a chemical sensor of reduced ecosystem productivity associated with drought stress.

54 ENVIRONMENTAL SCIENCES↗

Review: Fuel Volatility Standards and Spark-Ignition Vehicle Driveability

We've put spark-ignition engine fuel standards in place in order to ensure acceptable hot and cold weather driveability (HWD and CWD). Vehicle manufacturers and fuel suppliers have developed systems that meet our driveability requirements so effectively that drivers overwhelmingly find that their vehicles reliably start up and operate smoothly and consistently throughout the year. For HWD, fuels that are too volatile perform more poorly than those that are less volatile. Vapor lock is the apparent cause of poor HWD, but there is conflicting evidence in the literature as to where in the fuel system it occurs. Most studies have found a correlation between degraded driveability and higher dry vapor pressure equivalent or lower TV/L = 20, and less consistently with a minimum T50. For CWD, fuels with inadequate volatility can cause difficulty in starting and rough operation during engine warmup. The Driveability Index (DI)-a function of T10, T50, and T90-is well correlated with CWD in hydrocarbon fuels. For ethanol-containing fuels, a correction factor to the DI equation improves the correlation with CWD, although the best value for that factor has still not been determined. Ethanol increases the heat of vaporization. But, this is likely insignificant for E15 and lower concentration fuels. The impact of ethanol on driveability is likely due to its direct effect on vapor pressure at cold temperatures. For E51-E83 or flex-fuel blends, ASTM sets a minimum vapor pressure; however, published data suggest that a correction for the amount of ethanol in the fuel is needed to accurately predict CWD, possibly because ethanol has a higher lower-flammability limit.

30 DIRECT ENERGY CONVERSION↗

Energy, volatile production, and climatic effects of the Chicxulub Cretaceous/Tertiary impact

A comprehensive analysis of volatiles in the Chicxulub impact strongly supports the hypothesis that impact-generated sulfate aerosols caused over a decade of global cooling, acid rain, and disruption of ocean circulation, which contributed to the mass extinction at the Cretaceous/Tertiary (K/T) boundary. The crater size, meteoritic content of the K/T boundary clay, and impact models indicate that the Chicxulub crater was formed by a short period comet or an asteroid impact that released 0.7-3.4 x 10(31) ergs of energy. Impact models and experiments combined with estimates of volatiles in the projectile and target rocks predict that over 200 gigatons (Gt) each of SO2 and water vapor, and over 500 Gt of CO2, were globally distributed in the stratosphere by the impact. Additional volatiles may have been produced on a global or regional scale that formed sulfate aerosols rapidly in cooler parts of the vapor plume, causing an early, intense pulse of sulfuric acid rain. Estimates of the conversion rate of stratospheric SO2 and water vapor to sulfate aerosol, based on volcanic production of sulfate aerosols, coupled with calculations of diffusion, coagulation, and sedimentation, demonstrate that the 200 Gt stratospheric SO2 and water vapor reservoir would produce sulfate aerosols for 12 years. These sulfate aerosols caused a second pulse of acid rain that was global. Radiative transfer modeling of the aerosol clouds demonstrates (1) that if the initial rapid pulse of sulfate aerosols was global, photosynthesis may have been shut down for 6 months and (2) that for the second prolonged aerosol cloud, solar transmission dropped 80% by the end of first year and remained 50% below normal for 9 years. As a result, global average surface temperatures probably dropped between 5 degrees and 31 degrees K, suggesting that global near-freezing conditions may have been reached. Impact-generated CO2 caused less than 1 degree K greenhouse warming and therefore was insignificant compare to the sulfate cooling. The magnitude of sulfate cooling depends largely upon the rate of ocean mixing as surface waters cool, sink, and are replaced by upwelling of deep ocean water. This upwelling apparently drastically altered ocean stratification and circulation, which may explain the global collapse of the delta 13C gradient between surface and deep ocean waters at the K/T boundary.

NASA Center JPL↗

Organic Aerosol Volatility Parameterizations and Their Impact on Atmospheric Composition and Climate

Despite their importance and ubiquity in the atmosphere, organic aerosols are still very poorly parameterized in global models. This can be explained by two reasons: first, a very large number of unconstrained parameters are involved in accurate parameterizations, and second, a detailed description of semi-volatile organics is computationally very expensive. Even organic aerosol properties that are known to play a major role in the atmosphere, namely volatility and aging, are poorly resolved in global models, if at all. Studies with different models and different parameterizations have not been conclusive on whether the additional complexity improves model simulations, but the added diversity of the different host models used adds an unnecessary degree of variability in the evaluation of results that obscures solid conclusions. Aerosol microphysics do not significantly alter the mean OA vertical profile or comparison with surface measurements. This might not be the case for semi-volatile OA with microphysics.

Aerosols↗

Volatile Analysis by Pyrolysis of Regolith (Vapor) for Planetary Resource Prospecting

Measuring the chemical composition of planetary bodies and their atmospheres is key to understanding the formation of the Solar System and the evolution of the planets and their moons. In situ volatile measurements enable a ground-truth assessment of the distribution and abundance of resources such as water-ice and oxygen, important for a sustained human presence on the Moon and beyond. The Volatile Analysis by Pyrolysis of Regolith (VAPoR) instrument is a compact pyrolysis mass spectrometer designed to detect volatiles released from solid samples that are heated to elevated temperatures and is one technique that should be considered for resource prospecting on the Moon, Mars, and asteroids.

regolith↗

VESIcal: A Critical Approach to Volatile Solubility Modelling Using the Open-Source Engine Vesical

Accurate models of H(2)O and CO(2) solubility in silicate melts are vital for understanding volcanic plumbing systems. These models are used to estimate the depths of magma storage regions from melt inclusion volatile contents, investigate the role of volatile exsolution as a driver of volcanic eruptions, and track the degassing path followed by a magma ascending to the surface. However, despite the large increase in the number of experimental constraints over the last two decades, many recent studies still utilize an earlier generation of models which were calibrated on experimental datasets with restricted compositional ranges. This may be because many of the available tools for more recent models require large numbers of input parameters to be hand-typed (e.g., temperature, concentrations of H(2)O, CO(2), and 8–14 oxides), making them difficult to implement on large datasets. Here, we use a new open-source Python3 tool, VESIcal, to critically evaluate the behaviors and sensitivities of different solubility models for a range of melt compositions. Using literature datasets of andesitic-dacitic experimental products and melt inclusions as case studies, we illustrate the importance of evaluating the calibration dataset of each model. Finally, we highlight the limitations of particular data presentation methods, such as isobar diagrams, and provide suggestions for alternatives, and best practices regarding the presentation and archiving of data. This review will aid the selection of the most applicable solubility model for different melt compositions, and identifies areas where additional experimental constraints on volatile solubility are required.

magma↗

Bessel Tube to Capture Lunar Volatiles

Current arts to create linear motion or acceleration of fine particles and molecules into devices such as mass spectrometers and vacuum pumps rely on the pressure difference created by a pinhole or mechanical processes. However, in an environment of vacuum, these approaches do not create such a pressure differential to drive and move fine particles and molecules. In some cases, electrostatic or magnetic processes may work to create the desired motion. A cylindrical harmonic of electric field, which is widely used in electron accelerators, offers a unique capability to capture and induce a linear motion of molecules and particles when electrically charged. Generally, lunar volatiles are electrostatically charged. The idea to capture and collect the lunar volatiles by creating a drift axis of motion using a cylindrical harmonic field has led to the development of a device concept, called a Bessel Tube. The Bessel Tube concept ingests fine particles, gaseous atoms, and gaseous molecules and guides them along an extraction tube for collection, separation, and analysis. The Bessel Tube concept for lunar volatile collection is discussed.

Bessel Tube↗

Volatiles and Refractories in Surface-Bounded Exospheres in the Inner Solar System

Volatiles and refractories represent the two end-members in the volatility range of species in any surface-bounded exosphere. Volatiles include elements that do not interact strongly with the surface, such as neon (detected on the Moon) and helium (detected both on the Moon and at Mercury), but also argon, a noble gas (detected on the Moon) that surprisingly adsorbs at the cold lunar nighttime surface. Refractories include species such as calcium, magnesium, iron, and aluminum, all of which have very strong bonds with the lunar surface and thus need energetic processes to be ejected into the exosphere. Here we focus on the properties of species that have been detected in the exospheres of inner Solar System bodies, specifically the Moon and Mercury, and how they provide important information to understand source and loss processes of these exospheres, as well as their dependence on variations in external drivers.

Moon↗

Polar Resources Ice Mining Experiment-1 (PRIME-1) NASA’s First Polar Drilling and Volatiles Detection Mission

The US Administration announced in 2019 that NASA would return to the Moon where it would seek to establish a sustainable lunar presence. In Situ Resource Utilization (ISRU) is needed to sustain and grow hu-man surface exploration and it is therefore a vital part of ensuring this bold endeavor. ISRU requires ground-truth on physical, mineral, and volatile characteristics of the resources. Water, a key and game-changing resource, exists in the polar regions of the Moon. Learning to harvest and use this resource first requires understanding where the resource is abundantly located and on what scales. Harvested water, which is usable for life support and fuel, must be identified, quantified, and assessed for its mining feasibility. The project goal for PRIME-1 is to develop a flight-ready instrumentation package that can assess the volatiles at a polar lunar landing location. PRIME-1 is the combination of two instruments; Mass Spectrometer observing lunar operations (MSolo) and The Regolith and Ice Drill for Exploring New Terrain (TRIDENT). TRIDENT is an 1-meter augering drill capable of bringing incremental lunar regolith samples to the surface for volatile analysis. MSolo is a modified, commercial-off-the-shelf (COTS) mass spectrometer capable of qualifying and quantifying atomic species in the 1-100 amu range, including isotopic differentiation. These two lunar flight instruments operating together make up the PRIME-1 instrument suite. PRIME-1 intends to fly on and operate from a static lunar lander acquired by the NASA Commercial Lunar Payload Services (CLPS) acquisition process. The PRIME-1 payload suite was selected to fly on Intuitive Machines Nova-C lander, and is currently targeting a late Fall 2023 landing attempt.

MSolo↗

Polar Resources Ice Mining Experiment-1 (PRIME-1) NASA’s First Polar Drilling and Volatiles Detection Mission

The US Administration announced in 2019 that NASA would return to the Moon where it would seek to establish a sustainable lunar presence. In Situ Resource Utilization (ISRU) is needed to sustain and grow hu-man surface exploration and it is therefore a vital part of ensuring this bold endeavor. ISRU requires ground-truth on physical, mineral, and volatile characteristics of the resources. Water, a key and game-changing resource, exists in the polar regions of the Moon. Learning to harvest and use this resource first requires understanding where the resource is abundantly located and on what scales. Harvested water, which is usable for life support and fuel, must be identified, quantified, and assessed for its mining feasibility. The project goal for PRIME-1 is to develop a flight-ready instrumentation package that can assess the volatiles at a polar lunar landing location. PRIME-1 is the combination of two instruments; Mass Spectrometer observing lunar operations (MSolo) and The Regolith and Ice Drill for Exploring New Terrain (TRIDENT). TRIDENT is an 1-meter augering drill capable of bringing incremental lunar regolith samples to the surface for volatile analysis. MSolo is a modified, commercial-off-the-shelf (COTS) mass spectrometer capable of qualifying and quantifying atomic species in the 1-100 amu range, including isotopic differentiation. These two lunar flight instruments operating together make up the PRIME-1 instrument suite. PRIME-1 intends to fly on and operate from a static lunar lander acquired by the NASA Commercial Lunar Payload Services (CLPS) acquisition process. The PRIME-1 payload suite was selected to fly on Intuitive Machines Nova-C lander, and is currently targeting a late Fall 2023 landing attempt.

MSolo↗

The Effect of Glass Chemistry on Caesium Volatility

The UK currently has 99,000 m3 of intermediate level waste (ILW). The current preferred treatment route is cementation. However, thermal treatment could offer a better long term option due to higher waste loading and lower storage costs. This project will focus on volatile retention in the vitrification process to make thermal treatment a more viable option. A series of iron phosphate base glasses were prepared with the nominal molar composition xM{sub y}O{sub z}(40 - x)Fe{sub 2}O{sub 3}-P{sub 2}O{sub 5} (M{sub y}O{sub z} = B{sub 2}O{sub 3}, MnO, ZnO with x = 5%). Samples are given names of the form IPG-1-X5 where X = B, Mn or Zn. For all batches, reagents were weighed and mechanically mixed to produce 150 g of glass. melted at 1150 deg. C for 3 h, Samples were immediately transferred to an annealing furnace and annealed at 450 deg. C for 1 h before being cooled to room temperature at 1 deg. C min{sup -1}. 75 g batches was produced with a target of 2 wt.% caesium oxide. Each batch was placed into a mullite crucible and placed in the sealed system seen below. Each canister was placed into a top-loading resistance furnace and ramped to 950 deg. C at a rate of 3 deg. C min{sup -1} under a nitrogen atmosphere with a flowrate of ∼0.9 L min{sup -1}. The samples were held at this temperature for 3 h before power to the furnace was removed and the system allowed to cool naturally. Once cool, the steel canister was opened and the entire apparatus (steel canister, mullite crucible and tubing) was washed through with ∼50 ml of 0.5 M HNO{sub 3} to allow for a complete mass balance of the caesium species. A series of Iron Phosphate glasses have been produced and characterised to investigate the influence of glass chemistry on the volatility of caesium. All glasses were doped with ∼2 wt.% Cs{sub 2}O and re-melted at 950 deg. C for 3 hours in a specially designed furnace set-up. Results of these experiments showed that the addition of 5 mol. % ZnO greatly increased the retention of Cs{sub 2}O whilst B{sub 2}O{sub 3} was detrimental to the Cs{sub 2}O retention. A series of iron phosphate based glasses have been produced with 5 mol.% additions of B{sub 2}O{sub 3}, MnO and ZnO, substituted in place of Fe{sub 2}O{sub 3}. All samples were analysed before and after being doped and re-melted with a 2 wt.% addition of Cs{sub 2}O. The effect of each additive on the base glass has been reported showing that both B{sub 2}O{sub 3} and ZnO increase the glass transition temperature, whilst MnO additions decrease the thermal stability of the glass. The Q-speciation of the glasses was investigated, and the results showed that the additives did not significantly influence the Q-speciation in comparison to the base glass. It has been shown that the addition of ZnO dramatically increases the retention of Cs during re-melting by almost a factor of 10 in comparison to the base glass, whilst the addition of MnO addition increased the caesium retention but only by a factor of ∼3. The addition of B{sub 2}O{sub 3} had a detrimental effect on the volatility in comparison to the 40Fe{sub 2}O{sub 3}-60P{sub 2}O{sub 5} base glass.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Cobalt Recovery by the Chlorination-Volatilization Method

This communication presented the chlorination-volatilization of cobalt using calcium chloride. Effects of variables on the cobalt volatilization rate were investigated, including the flow rate, oxygen partial pressure, and water vapor content of the carrier gas, the roasting time, and the temperature. It was found that the chlorination of cobalt oxide was mainly in the form of indirect chlorination and cobalt volatilized in the form of gaseous CoCl{sub 2}.

36 MATERIALS SCIENCE↗

Shock wave formation in the thermosphere by an earthgrazing fireball: Empirical evidence for volatile-enhanced hydrodynamic shielding

Hydrodynamic shielding is a theoretically well-established but observationally elusive and experimentally difficult-to-replicate phenomenon with implications that extend far beyond meteor physics. Rare earthgrazing meteoroids with infrasound signatures that penetrate to the ground can be used to probe hydrodynamic shielding that leads to strong shock formation at high altitude. Here, we report the first coordinated optical and multi-station infrasound observations of a centimeter-scale earthgrazing fireball that generated sustained cylindrical line shock at thermospheric altitudes near 92 km. The event was recorded by numerous optical stations and three infrasound arrays, allowing trajectory reconstruction, ablation behavior, acoustic source localization, and shock characteristics. Optical observations indicate early mechanical erosion and ablation/evaporation at exceptionally low dynamic pressure, consistent with a cometary or a porous, volatile-bearing CM chondritic object. Independent infrasound detections localize shock generation to multiple points along a 164 km trajectory segment near perigee. Weak-shock modeling yields a consistent blast radius of ∼30 m, implying an acoustic-equivalent source size far exceeding the physical dimensions of the ∼45 g nucleus. We demonstrate that classical gas dynamics and ablation-driven hydrodynamic shielding alone cannot account for these observations under ambient thermospheric conditions. We show that volatile release provides the additional flow-field density enhancement required to amplify hydrodynamic shielding, reduce the effective local Knudsen number, and sustain a shock envelope capable of radiating detectable infrasound. Furthermore, these results demonstrate that small, volatile-rich meteoroids can transiently establish continuum-like flow in rarefied environments.

Astrometry↗

Volatile Species Retention During Metallic Fuel Casting

Metallic nuclear fuels are candidate transmutation fuel forms for advanced fuel cycles. Through the operation of the Experimental Breeder Reactor II metallic nuclear fuels have been shown to be robust and easily manufactured. However, concerns have been raised concerning loss of americium during the casting process because of its high vapor pressure. In order to address these concerns a gaseous diffusion model was developed and a series of experiments using both manganese and samarium as surrogates for americium were conducted. The modeling results showed that volatility losses can be controlled to essentially no losses with a modest overpressure. Experimental results also showed volatile species retention down to no detectable losses through overpressure, although the loss values varied from the model results the same trend was seen. Bases on these results it is very probably that americium losses through volatility can be controlled to no detectable losses through application of a modest overpressure during casting.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗