Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “unit dynamics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Improvement of Atmospheric Objective Analysis Over Sloping Terrain and Its Impact on Shallow-Cumulus Clouds in Large-Eddy Simulations

Surface topography strongly impacts the regional atmospheric circulation dynamically and thermodynamically. Over the Great Plains in the United States, the gently tilted slope is an important factor that impacts clouds, convection and regional circulations. This study enhances an atmospheric constrained variational analysis by using a terrain-following sigma vertical coordinate and applies to the data collected at the Southern Great Plain (SGP) site of the Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) program. Sensitivity studies are performed to examine the impact of the terrain effects on the derived large-scale atmospheric forcing fields and the simulated shallow-cumulus clouds in large-eddy simulation (LES) driven by the forcing. We found that the terrain impacts on the large-scale forcing fields are mainly at lower levels and are strongly controlled by up/downslope winds. The response of the derived forcing to the slope of the terrain is monotonic, but the response of the simulated shallow-cumulus clouds is more complex and depends on several factors. Overall, the terrain impact is small over SGP due to the small slope angle. However, the flat-surface assumption may cause larger biases in the large-scale forcing fields at locations with steeper terrain. The new sigma-coordinate algorithm, with its consideration of surface slope, should be more suitable to derive large-scale objective analysis over regions with steep terrain for application to force single-column models, cloud resolving models and LES models.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

The impact of policies and business models on income equity in rooftop solar adoption

Low- and moderate-income (LMI) households are less likely to adopt rooftop solar photovoltaics (PVs) than higher-income households in the United States. As the existing literature has shown, this dynamic can decelerate rooftop PV deployment and has potential energy justice implications, in light of the cost-shifting between PV and non-PV households that can occur under typical rate structures and incentive programmes. Here we show that some state policy interventions and business models have expanded PV adoption among LMI households. Additionally, we find evidence that LMI-specific financial incentives, PV leasing and property-assessed financing have increased the diffusion of PV adoption among LMI households in existing markets and have driven more installations into previously underserved low-income communities. By shifting deployment patterns, we posit that these interventions could catalyse peer effects to increase PV adoption in low-income communities even among households that do not directly benefit from the interventions.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2026

Nanoscale ultrafast lattice modulation with a free-electron laser

Ultrafast optical laser-based techniques have enabled the probing of atomistic processes at their intrinsic temporal scales with femto- and attosecond resolution. However, the long wavelengths of optical lasers have prevented their interrogation and manipulation with nanoscale spatial specificity. Advances in hard X-ray free-electron lasers have enabled progress in developing X-ray transient-grating spectroscopy, a technique that aims to coherently control elementary excitations with nanoscale X-ray standing waves. Thus far, the realization of this technique at the nanoscale has been a challenge. Here we demonstrate X-ray transient-grating spectroscopy with spatial periods of the order of 10 nm via the subfemtosecond synchronization of two hard X-ray pump pulses at a precisely controlled crossing angle. This creates a thermal grating and preferentially excites coherent longitudinal acoustic phonon modes with the transient-grating wavevector. On probing with a third, variably delayed, X-ray pulse with the same photon energy, time-and-wavevector-resolved measurements of the modulation of the induced scattering intensity provide evidence of ballistic thermal transport at nanometre scales. Finally, these results highlight the potential of X-ray transient gratings as a powerful platform for studying nanoscale transport in condensed matter and the coherent control of nanoscale dynamics.

nonlinear optics↗
DOE OSTI2026

Digital quantum magnetism on a trapped-ion quantum computer

Digital quantum matter—realized when discrete quantum gates approximate continuous time evolution—is susceptible to heating into chaotic, structureless states. If digitization errors are adequately suppressed, a long-lived transient regime of approximately energy-conserving dynamics can be observed on gate-based quantum computers. Conservation of energy, in turn, enables the exploration of a wide variety of complex behaviours observed in equilibrium systems, ranging from the non-trivial microscopic origins of thermalization itself to the stabilization of effective models hosting exotic emergent properties. Here we use Quantinuum’s H2 quantum computer to simulate digitized dynamics of the quantum Ising model, suppressing digitization errors well enough to observe thermalization on timescales that severely challenge classical simulation methods. Relaxation of an inhomogeneous state reveals an emergent hydrodynamics owing to approximate energy conservation and we compute the associated diffusion constant. By reprogramming our simulations to take place on a triangular lattice with periodic boundary conditions, we observe thermalization consistent with emergent gauge and topological constraints resulting from lattice frustration. Furthermore, our results were enabled by continued advances in two-qubit gate quality (native partial entangler fidelities of 99.94(1)%) and establish digital quantum computers as powerful tools for studying (effectively) continuous-time dynamics.

Information theory and computation↗
DOE OSTI2026

Onset of Rayleigh-Bénard convection at fuel-ablator interfaces in inertial confinement fusion simulations

Here, we demonstrate the onset of Rayleigh-Bénard convection (RBC) near the fuel-ablator interface of inertial confinement fusion (ICF) implosion simulations for the scenario in which Rayleigh-Taylor or Richtmyer-Meshkov instabilities are suppressed. This convective heating within the cold fuel can degrade the adiabat and therefore performance of ICF implosions even without mixing of fuel and ablator. Our work suggests additional considerations to realize design adiabats in otherwise ideal ICF implosions: first, via control of the temperature differences between ablator and fuel and, second, control of the fuel acceleration which we show has a complex interplay with the RBC dynamics.

Physics - Plasma physics↗
DOE OSTI2025

A Novel Machine Learning Workflow to Classify Mobile Home Parks at Scale

Understanding the built environment is essential to the overall study of population dynamics, grid infrastructure, emergency response, among others. In the United States there are multiple classifications for buildings within the built environment such as residential, signifying family homes while commercial buildings consist of apartments or larger structures which are multi-purpose. While there is a high level of understanding of where these aforementioned structures are located, there is a third class of structures, mobile home parks (MHP) which have been under-represented in the literature despite there being an estimated 2.7 million of them within the United States. Research has shown that individuals who reside in MHP are at higher risk to extreme events due to their location and structural integrity of residence. Attention must now turn to identifying MHP at scale to help first responders and policy makers understand where these at risk populations reside. To address for this gap, we develop a novel methodology to infer MHP at scale based off morphologies derived at a building level. Here, we show that across 3 million buildings in 6 states within the United States it is possible to identify MHP with 83% accuracy. This novel approach to identify MHP from other structures within the built environment using a machine learning approach provides a new tool to leverage in relation to helping at-risk populations.

Stipek, Clinton [Oak Ridge National Laboratory (OR↗
DOE OSTI2024

Bipolar Membrane Capacitive Deionization for the Selective Capture of Lithium Ions from Brines and Conversion to Lithium Hydroxide

Meeting the increasing demand for lithium in vehicle electrification and renewable energy storage requires innovations in lithium-ion (Li + ) separations. Traditional solar evaporation methods for lithium recovery are slow and consume tremendous volumes of water and secondary chemicals (acids and bases). This study introduces a bipolar membrane capacitive deionization (BPM-CDI) unit for direct lithium extraction and LiOH production without the external addition of acids and bases. Utilizing de-lithiated lithium-iron-phosphate (LFP) coated carbon cloth electrodes, the BPM-CDI unit demonstrates selective Li + capture over competing ions. Molecular dynamics simulations and H-cell experiments elucidate pH inversion mechanisms during Li + release, yielding LiOH. The BPM-CDI platform efficiently removes Li + from synthetic brines featuring 8x higher Mg 2+ concentrations (200 ppm Mg 2+ ) and 26x higher Na + concentrations (682 ppm Na + ), achieving a LiOH concentration of 124 ppm (36 ppm Li + ) after 8 cycles of recirculation. Post-mortem analysis confirms electrode integrity and stability. BPM-CDI integrated with selective electrodes is a promising electrochemical separation-reactor platform for lithium recovery while producing LiOH.

Kulkarni, Tanmay↗
DOE OSTI2020

Analysis of spent nuclear fuel multipurpose canister dynamics during rail transportation

The primary mode of spent nuclear fuel transportation within the United States will be by railcar. One such system is the Atlas railcar, which is designed to transport 17 different spent nuclear fuel cask systems, including bare fuel systems and canister fuel systems. In the latter configuration, multipurpose canisters containing spent nuclear fuel may be placed within an overpack for storage, or within a cask for transportation. Compared to bare fuel systems, canister fuel systems have additional degrees of freedom for motion during transportation, because clearance between the cask and canister allows for some motion of the canister to occur relative to the cask. This work investigates the effect of canister motion on the shock and vibration imparted to the spent nuclear fuel within. Structural dynamic analyses have been conducted to identify the effects of canister to cask clearance, presence and type of dunnage, and loading direction and frequency. This modeling study calculates anticipated cask motion, canister motion, and spent nuclear fuel structural dynamic response to normal conditions of transportation railcar motion using finite element analysis methods that were developed to model the rail segment of the ENSA/DOE (Equipos Nucleares S.A., U.S. Department of Energy) multimodal transportation test of 2017.

SNF, UNF, LS-DYNA, dynamics, kinematics, shock, vi↗
DOE OSTI2025

AI-Assisted Conceptual Development of a Pre-Geometric Cosmological Model - An Exercise in AI-Assisted Conceptual Framework Generation, Paper I: Foundations and Replication Dynamics

We develop a pre-geometric cosmological framework in which existence is identified with a finite amount of unstructured energy possessing vibration as its only intrinsic property. This vibrational substrate occupies an open, bounded spectral interval $(\omega_{\min},\omega_{\max})$, ensuring finiteness of total energy and excluding infinitely stable configurations. The substrate evolves under two fundamental and competing tendencies---excitation, which amplifies coherence, and randomization, which scrambles it. Their balance produces a metastable unstructured regime in which rare fluctuations may form long-lived self-consistent spectral configurations. Because the substrate is finite and subject to competing order--disorder dynamics, no coherent configuration can be perpetually stable. We show that the only mechanism capable of sustaining long-lived organization is a replication instability: a coherent unit may reproduce into multiple offspring according to a general $1\!\to n$ rule. Replication consumes energy from the finite substrate, breaks the metastable symmetry, and induces a discrete notion of event time through the replication tick $\Delta\tau$. Temporal succession is defined through correlation ordering of spectral microstates, producing an intrinsic pre-causal structure. The compactness of the spectral domain imposes minimal and maximal timescales, bounds the internal coherence of emergent units, and limits their proliferation. These spectral constraints serve as precursors for the emergence of geometry, adjacency, and a limiting propagation speed, developed in subsequent papers of this series. Paper I provides the foundational axioms (PG1--PG9) governing the spectral substrate, its metastable dynamics, the formation of coherent units, and the necessity of replication, establishing a fully pre-geometric stage from which causal and geometric structure naturally emerge.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

STEPs-SOL, a Peptoid Force Field Parameterization to Include Solvent Effects

As peptoids (N-substituted glycines) continue to gain popularity as a class of biomimetic polymers, the importance and demand for accurate force fields in molecular simulations also grow. Building on the vacuum-optimized Systematic and Extensible Force Field for Peptoids (STEPs) force field, here we present STEPs-SOL, a novel peptoid force field parametrization that effectively incorporates solvent effects to enhance the accuracy of peptoid simulations. The development of STEPs-SOL is based on the need for precise electrostatic modeling achieved through solvent-specific partial charge optimization. Here, our systematic approach significantly improves agreement with experimental measurements, reducing the mean absolute error in cis/trans ratio predictions (ΔG c/t ) by an average of 38% across multiple peptoid residues and solvent environments. This improved parametrization addresses computational challenges associated with nonbonded energies while maintaining a workflow that relies on high-level quantum mechanical data rather than depending solely on limited experimental equilibrium properties. By evaluating the effects of conformational bias in restrained electrostatic potential (RESP) charge generation and examining their impact on peptoid conformations in various solvents, we enhance our understanding of peptoid structural dynamics while providing a more accurate modeling framework.

force field↗
DOE OSTI2023

Numerical Analysis of Novel Plate Type Heat Exchanger with Oval-Twisted Channels

The novel heat exchanger (HX) designs implementing geometrical and surface modification combinations are expected to perform better than traditional HX technologies. Applied enhancement techniques seek to achieve (1) higher overall heat transfer performance, (2) increased compactness, and (3) simplified or comparable manufacturability. One innovative enhancement technique is to generate swirling flow vortices induced by channel or tube twisting. The turbulence generated by the twisted cross-section greatly enhances the heat transfer rate with minimal increases in pressure drop. Plate-type HXs and Printed Circuit Heat Exchangers (PCHXs) are compact designs that achieve high heat transfer rates per unit volume by utilizing several small channels, which maximizes the heat transfer surface area between the hot and cold fluids. Currently, advanced manufacturing technologies enable the design and fabrication of compact-type units with complicated channel geometries to achieve the highest performance and meet the compactness criteria of innovative HX technology. The proposed HX design concept combines the compactness of plate-type HXs and twisted channels, which provide additional turbulence and flow swirl enhancement. The plate-type oval-twisted HX (PTOTHX) is a crossflow configuration, with 16 short channels on one side (for hot fluid) and 8 long channels on the perpendicular side (for cold fluid). The inlet plenums have flow guide vanes to redirect flow and produce uniformity across the various flow paths. The compact size and purportedly improved heat transfer performance of the PTOTHX investigated herein prove its viability in various applications. Some notable potential nuclear applications of the PTOTHX include reactor core, spent fuel cooling, and residual heat dissipation. To establish a reference case, circular channels (PTCHX) are also considered in the present study for comparison with (PTOTHX). This paper aims to outline the numerical analysis procedures for determining the viability of the PTOTHX by comparing its heat transfer performance with the PTCHX units. The computational study used STAR-CCM+, a commercial computational fluid dynamics (CFD) code. Sensitivity analysis and model selection studies are conducted to determine the appropriate mesh density and turbulence model to provide the reported results. Numerical analyses comparing the Nusselt number (Nu) of the PTOTHX design with a comparable HX unit, including a circular cross-section and no twisting (PTCHX), show an overall heat transfer performance increase of 29-55% for balanced flow and 29-59% for imbalanced flow. Oval-cross-sectional twisted channels induce swirling flow vortices, enhancing the working fluid's convective heat transfer capabilities.

25 ENERGY STORAGE↗
DOE OSTI2026

Object-Based Evaluation of Dynamical and Statistical Downscaled Precipitation Products over CONUS

High-resolution precipitation data, generated through dynamical downscaling (DD) or statistical downscaling (SD) of global climate model output, provide critical information for regional climate assessment and adaptation planning. Most downscaling development and validation have focused on accurate gridscale precipitation construction and ignored the spatial structure of precipitation across model grids and at the event scale. However, many applications, e.g., hydrologic modeling and the analysis using the downscaled precipitation, require a reasonable representation of the spatial structure of precipitation within watersheds. Therefore, a set of standard metrics to evaluate the representation of the spatial structure of individual storms across diverse downscaled precipitation products is desired. To address this need, we conducted an object-based evaluation of precipitation in decades-long DD and SD products over the contiguous United States (CONUS). Specifically, we evaluate their ability to reproduce various features of precipitation objects in the observations: total volume, precipitation area, peak intensity, and spatial structure. Multiple metrics (bias, Perkins score, and nonparametric statistical tests) are used to quantify model performance. Our evaluation reveals notable variations in performance among individual products across different climate zones and seasons, as well as between extreme and nonextreme events. In general, most DD products exhibit balanced performance across the four precipitation object features, while SD products vary more significantly in their performance across products. Based on this comprehensive evaluation, we provide guidance on choosing downscaled products for specific regions, seasons, and precipitation object features. These findings and recommendations can inform precipitation-relevant modeling and analysis over CONUS, guide future downscaling technique developments, and provide actionable information for climate impact assessment and adaptation.

Downscaling↗
DOE OSTI2025

Quantum Algorithm for Linear Non-unitary Dynamics with Near-Optimal Dependence on All Parameters

We introduce a family of identities that express general linear non-unitary evolution operators as a linear combination of unitary evolution operators, each solving a Hamiltonian simulation problem. This formulation can exponentially enhance the accuracy of the recently introduced linear combination of Hamiltonian simulation (LCHS) method [An, Liu, and Lin, Physical Review Letters, 2023]. For the first time, this approach enables quantum algorithms to solve linear differential equations with both optimal state preparation cost and near-optimal scaling in matrix queries on all parameters.

Applied Dynamical Systems↗
DOE OSTI2020

Spatiotemporal Characteristics and Propagation of Summer Extreme Precipitation Events over United States: A Complex Network Analysis

Complex Network (CN) is a graph-theory based depiction of relation shared by various elements of a complex-dynamical system such as the atmosphere. Here we applied the concept of CN to understand the directionality and topological structure of summer extreme precipitation events (SEPEs) over the conterminous United States (CONUS). The SEPEs are calculated based on the 95th percentile daily rainfall at 0.5ox0.5o spatial resolution for CONUS to investigate the multi-dimensional characteristics of precipitation extremes. The derived CN coefficients (e.g., betweenness centrality, clustering coefficient, orientation, and network divergence) reveal important structural and dynamical information about the topology of the SEPEs and improve understanding of the dominant meteorological patterns. The initiation and propagation of SEPEs from the source-zones to the sink-zones are identified. The SEPEs are influenced by topography, dominant wind patterns, and moisture sources in terms of their topological structure and spatial dynamics.

Mondal, Somnath↗
DOE OSTI2025

The Dynamic Networks Experiments: Virtual Experiments to Quantify Gains in Nuclear Explosion Monitoring

We describe an ongoing series of virtual experiments conducted collaboratively by four United States National Laboratories: Sandia National Laboratories, Los Alamos National Laboratory, Lawrence Livermore National Laboratory, and Pacific Northwest National Laboratory. These Dynamic Network Experiments (DNEs) provide an experimental framework to evaluate the potential impact of new research tools on nuclear explosion monitoring. The second DNE (DNE2), completed in 2024, exploited waveform data (seismic, infrasound, and electromagnetic) that was recorded by multi-modal sensors within and near the Nevada National Security Site and synthetic radionuclide signatures over multiple time periods. During the execution of DNE2, we processed and analyzed data through a multi-stage event processing pipeline that ingested raw data, performed quality control, detected signals, built events from these signals, located these events, and characterized the events’ source types and sizes. For each stage and over the entire event processing pipeline, we evaluated performance changes by comparing the performance of new data processing methods, models, and algorithms against a baseline. We also performed an additional execution phase to assess event processing pipeline function, speed, and efficiency against that of an expert analyst, including computational and manual efforts. Finally, we assessed the impact and effort of modern computing infrastructure on the monitoring pipeline. This paper describes key elements of the DNEs, from formulation through execution, as demonstrated in DNE2. The DNEs introduce several novel concepts to quantitatively measure the potential impact of new methods on explosion monitoring, including the collaborative design of multi-modal datasets, performance and logistical metrics, and integrated analyses.

42 ENGINEERING↗
DOE OSTI2025

Monolithic optoelectronic circuit design for on-chip terahertz applications

We demonstrate a monolithic coplanar stripline platform for on-chip terahertz (THz) generation, transmission, and detection, addressing key challenges of mode purity, bandwidth, and referencing. Capacitive coupling of the photoconductive generator switch enforces pure odd-mode propagation, increases THz field strength, and extends the operational frequency range, achieving 0.05–1.4 THz. Our architecture enables fully monolithic fabrication with amorphous silicon switches, in situ field referencing, and galvanic isolation between generation and detection. Finite-element simulations and experiments confirm that suppressing parasitic modes improves signal integrity, providing a robust platform for high-fidelity THz spectroscopy, ultrafast electronics, and nanoscale quantum materials research.

Capacitive coupling↗
DOE OSTI2025

Active-noise-induced dynamic clustering of passive colloidal particles

Active fluids generate spontaneous, often chaotic mesoscale flows. Harnessing these flows to drive soft materials embedded within an active fluid into structures with controlled length scales and lifetimes is a key challenge at the interface between the fields of active matter and nonequilibrium self-assembly. Here, we present a simple and efficient computational approach to model soft materials advected by active fluids, by simulating particles moving in a spatiotemporally correlated noise field. To illustrate our approach, we simulate the dynamical self-organization of repulsive colloids within such an active noise field. The colloids form structures whose sizes and dynamics can be tuned by the correlation time and length of the active fluid, and range from small rotating droplets to clusters with internal flows and system-spanning sizes that vastly exceed the active correlation length. Our results explain how the interplay between active fluid time and length scales and emergent driven assembly can be used to rationally design functional assemblies. More broadly, our approach can be used to efficiently simulate diverse active fluids and other systems with spatiotemporally correlated noise.

Brownian dynamics↗
DOE OSTI2026

Molecular Dynamics Investigation of Oil Wetting on Synthetic Polymer Substrates

Understanding the interaction of polymer surfaces with nonpolar, low surface tension liquids, or whether a substrate is oleophobic versus oleophilic, is critical for applications ranging from antifingerprint coatings to oil–water separation membranes and oil spill remediation. Despite its technological importance, the molecular mechanisms underpinning polymer–oil wetting are not well characterized. Here, we employ molecular dynamics simulations to investigate the behavior of n-hexadecane in contact with chemically distinct polymer surfaces, spanning eight constitutional unit chemistries as well as amorphous and crystalline morphologies. This permits a critical examination of both thermodynamic and dynamic descriptors of oleophobicity, including oil contact angle, dewetting free energy, interfacial diffusivity, and a proposed “ghost probe energy,” which does not require explicit simulation of oil–polymer interactions. We find that the oil contact angle does not reliably distinguish oleophobic behavior across polymer chemistries, whereas other metrics provide clearer and more consistent differentiation. Analysis of the results reveals that polymer–oil wetting behavior is primarily governed by interfacial van der Waals interactions and modulated by surface flexibility and morphology. Collectively, this work establishes a computational framework for characterizing oil wetting and provides additional insight into what molecular-level factors dictate trends in oleophobicity.

lipids↗