SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
A more accurate algorithm was developed to compute thermal inertia from temperature difference and albedo information. The error of this algorithm is about 1/3 of the measurement error in HCMM as opposed to the current algorithm which can have an error 5 times larger. A northeast trending lineament was discovered in southwestern Arizona on enhanced thermal inertia images.
Hardware-in-the-loop (HIL) evaluation is a method in which the test subject is split into a physical part and a simulated part, and these parts are connected with interfaces to form a combined physical-numerical system. Power-hardware-in-the-loop (PHIL) systems, where actual hardware is connected to a real-time model, can exhibit issues of instability, inaccuracy and errors when operating in a closed-loop. The challenges of generating a PHIL setup are that, first, because of the limited dynamic response of the different parts of the system, the test results might be inaccurate, and, second, because of the high frequency noise introduced by the sensors to the closed-loop system, it can be difficult to design a compensator for the real-time emulator response, while stabilizing the closed-loop system at the same time. In this paper, different parts of a PHIL system are characterized, and the feedback compensator system design is proposed for the stable operation of the closed-loop PHIL system. The issues as observed in a PHIL system without any compensator are demonstrated using experimental results, and the effectiveness of a first order phase lead compensator is validated.
This paper exploits the relationships among the time-domain and frequency-domain system norms to derive information useful for modeling and control design, given only the system step response data. A discussion of system and signal norms is included. The proposed procedures involve only simple numerical operations, such as the discrete approximation of derivatives and integrals, and the calculation of matrix singular values. The resulting frequency-domain and Hankel-operator norm approximations may be used to evaluate the accuracy of a given model, and to determine model corrections to decrease the modeling errors.
The new CubeSpark mission concept is being developed as a constellation of up to six satellites for high-resolution 3D lightning mapping. Each satellite in low-Earth orbit (LEO) will use optical and radio frequency (RF) sensors to geolocate individual sources from lightning flashes. The purpose of this study is to evaluate the potential accuracies and feasibilities of RF-based geolocation methods. This is done using a robust simulation framework to accurately depict the ionosphere’s effect on propagating RF signals, using their arrival times at each station to reconstruct source locations. We identified the primary sources of error as geometric, ionospheric, and instrumental. These are each analyzed to determine their quantitative effect on geolocation uncertainty. CubeSpark’s science objectives include mapping thundercloud charge regions and even individual flash channel structure for applications across a wide range of fields from climatology to hydrology. These applications require geolocation accuracy better than 1-2 km in each dimension, thus special care must be taken to optimize constellation design, minimize the main sources of error, and maximize CubeSpark’s potential. The algorithms developed in this study show promising results, with large regions having both horizontal and vertical uncertainties less than 1 km. After the removal of the Lightning Imaging Sensor from the International Space Station, an observational gap has been left for lightning observers from LEO. It therefore becomes increasingly vital to evaluate and improve on the current state of lightning mapping to prepare for the next generation of 3D lightning geolocation.
The new CubeSpark mission concept is being developed as a constellation of up to six satellites for high-resolution 3D lightning mapping. Each satellite in low-Earth orbit (LEO) will use optical and radio frequency (RF) sensors to geolocate individual sources from lightning flashes. The purpose of this study is to evaluate the potential accuracies and feasibilities of RF-based geolocation methods. This is done using a robust simulation framework to accurately depict the ionosphere’s effect on propagating RF signals, using their arrival times at each station to reconstruct source locations. We identified the primary sources of error as geometric, ionospheric, and instrumental. These are each analyzed to determine their quantitative effect on geolocation uncertainty. CubeSpark’s science objectives include mapping thundercloud charge regions and even individual flash channel structure for applications across a wide range of fields from climatology to hydrology. These applications require geolocation accuracy better than 1-2 km in each dimension, thus special care must be taken to optimize constellation design, minimize the main sources of error, and maximize CubeSpark’s potential. The algorithms developed in this study show promising results, with large regions having both horizontal and vertical uncertainties less than 1 km. After the removal of the Lightning Imaging Sensor from the International Space Station, an observational gap has been left for lightning observers from LEO. It therefore becomes increasingly vital to evaluate and improve on the current state of lightning mapping to prepare for the next generation of 3D lightning geolocation.
We consider the problem of continuous quantum error correction from a Bayesian perspective, proposing a pair of digital filters using logarithmic probabilities that are able to achieve near-optimal performance on a three-qubit bit-flip code, while still being reasonable to implement on low-latency hardware. These practical filters are approximations of an optimal filter that we derive explicitly for finite time steps, in contrast with previous work that has relied on stochastic differential equations such as the Wonham filter. By utilizing logarithmic probabilities, we are able to eliminate the need for explicit normalization and can reduce the Gaussian noise distribution to a simple quadratic expression. The state transitions induced by the bit-flip errors are modeled using a Markov chain, which for log-probabilities must be evaluated using a LogSumExp function. We develop the two versions of our filter by constraining this LogSumExp to have either one or two inputs, which favors either simplicity or accuracy, respectively. Using simulated data, we demonstrate that the single-term and two-term filters are able to significantly outperform both a double threshold scheme and a linearized version of the Wonham filter in tests of error detection under a wide variety of error rates and time steps.
The loss of the Mars Climate Orbiter due to a software error reveals what insiders know: software development is difficult and risky because, in part, current practices do not readily handle the complex details of software. Yet, for scientific software development the MCO mishap represents the tip of the iceberg; few errors are so public, and many errors are avoided with a combination of expertise, care, and testing during development and modification. Further, this effort consumes valuable time and resources even when hardware costs and execution time continually decrease. Software development could use better tools! This lack of tools has motivated the semantic analysis work explained in this report. However, this work has a distinguishing emphasis; the tool focuses on automated recognition of the fundamental mathematical and physical meaning of scientific code. Further, its comprehension is measured by quantitatively evaluating overall recognition with practical codes. This emphasis is necessary if software errors-like the MCO error-are to be quickly and inexpensively avoided in the future. This report evaluates the progress made with this problem. It presents recommendations, describes the approach, the tool's status, the challenges, related research, and a development strategy.
his work presents a fully-digital high-accuracy real-time calibration procedure for frequency and time alignment of open-loop wirelessly coordinated coherent distributed antenna array (CDA) modems, enabling radio frequency (RF) phase coherence of spatially separated commercial off-the-shelf (COTS) software-defined radios (SDRs) without cables or external references such as the global navigation satellite system (GNSS). Building on previous work using high-accuracy spectrally-sparse time of arrival (ToA) waveforms and a multistep ToA refinement process, a high-accuracy two-way time transfer (TWTT)-based time–frequency coordination approach is demonstrated. Due to the two-way nature of the high-accuracy TWTT approach, the time and frequency estimates are Doppler and multipath tolerant, so long as the channel is reciprocal over the synchronization epoch. This technique is experimentally verified using COTS SDRs in a lab environment in static and dynamic scenarios and with significant multipath scatterers. Time, frequency, and phase stability were evaluated by beamforming over coaxial cables to an oscilloscope which achieved time and phase precisions of ~60– 70 ps , with median coherent gains above 99% using optimized coordination parameters, and a beamforming frequency root-mean-square error (RMSE) of 3.73 ppb in a dynamic scenario. Finally, experiments were conducted to compare the performance of this technique with previous works using an analog continuous-wave two-tone (CWTT) frequency reference technique in both static and dynamic settings.
The continuously Traversing Microphone System consists of a data acquisition and processing method for obtaining the modal coefficients of the discrete, coherent acoustic field in a fan inlet duct. The system would be used in fan rigs or full scale engine installations where present measurement methods, because of the excessive number of microphones and long test times required, are not feasible. The purpose of the investigation reported here was to develop a method for defining modal structure by means of a continuously traversing microphone system and to perform an evaluation of the method, based upon analytical studies and computer simulated tests. A variety of system parameters were examined, and the effects of deviations from ideal were explored. Effects of traverse speed, digitizing rate, run time, roundoff error, calibration errors, and random noise background level were determined. For constant fan operating speed, the sensitivity of the method to normal errors and deviations was determined to be acceptable. Good recovery of mode coefficients was attainable. Fluctuating fan speed conditions received special attention, and it was concluded that by employing suitable time delay procedures, satisfactory information on mode coefficients can be obtained under realistic conditions. A plan for further development involving fan rig tests was prepared.
New good (K, 1/N) convolutional codes for 8 or = to K or = to 13 and 2 or = to N or = to 8 were found and tabulated which require minimum signal-to-noise ratio (SNR) for given desired bit error rates (BER) with Viterbi decoding. The transfer function bound was used for the BER evaluations. These low-rate codes are expected to have a number of applications, especially for systems having large bandwidth-bit time products such as deep space and spread spectrum communication systems.
An on-orbit frequency stability performance analysis of the GPS NAVSTAR-1 quartz clock and the NAVSTARs-6 and -8 rubidium clocks is presented. The clock offsets were obtained from measurements taken at the GPS monitor stations which use high performance cesium standards as a reference. Clock performance is characterized through the use of the Allan variance, which is evaluated for sample times of 15 minutes to two hours, and from one day to 10 days. The quartz and rubidium clocks' offsets were corrected for aging rate before computing the frequency stability. The effect of small errors in aging rate is presented for the NAVSTAR-8 rubidium clock's stability analysis. The analysis includes presentation of time and frequency residuals with respect to linear and quadratic models, which aid in obtaining aging rate values and identifying systematic and random effects. The frequency stability values were further processed with a time domain noise process analysis, which is used to classify random noise process and modulation type.
New good (K, 1/N) convolutional codes for 8 or = to K or = to 13 and 2 or = to N or = to 8 were found and tabulated which require minimum signal-to-noise ratio (SNR) for given desired bit error rates (BER) with Viterbi decoding. The transfer function bound was used for the BER evaluations. These low-rate codes are expected to have a number of applications, especially for systems having large bandwidth-bit time products such as deep space and spread spectrum communication systems.
The reduced dynamic Global Positioning System (GPS) tracking technique has been applied for the first time as part of the GPS experiment on TOPEX/Poseidon. This technique employs local geometric position corrections to reduce orbit errors caused by the mismodeling of satellite forces. Results for a 29-day interval in early 1993 are evaluated through postfit residuals and formal errors, comparison with GPS and laser/DORIS dynamic solutions, comparisons on 6-hr overlaps of adjacent 30-hr data arcs, altimetry closure and crossover analysis. Reduced dynamic orbits yield slightly better crossover agreement than other techniques and appear to be accurate in altitude to about 3 cm RMS.
The NASA Lewis Research Center's Advanced Communication Technology Satellite (ACTS) was launched in September 1993. ACTS introduced several new technologies, including a multibeam antenna (MBA) operating at extremely short wavelengths never before used in communications. This antenna, which has both fixed and rapidly reconfigurable high-energy spot beams (150 miles in diameter), serves users equipped with small antenna terminals. Extensive structural and thermal analyses have been performed for simulating the ACTS MBA on-orbit performance. The results show that the reflector surfaces (mainly the front subreflector), antenna support assembly, and metallic surfaces on the spacecraft body will be distorted because of the thermal effects of varying solar heating, which degrade the ACTS MBA performance. Since ACTS was launched, a number of evaluations have been performed to assess MBA performance in the space environment. For example, the on-orbit performance measurements found systematic environmental disturbances to the MBA beam pointing. These disturbances were found to be imposed by the attitude control system, antenna and spacecraft mechanical alignments, and on-orbit thermal effects. As a result, the MBA may not always exactly cover the intended service area. In addition, the on-orbit measurements showed that antenna pointing accuracy is the performance parameter most sensitive to thermal distortions on the front subreflector surface and antenna support assemblies. Several compensation approaches were tested and evaluated to restore on-orbit pointing stability. A combination of autotrack (75 percent of the time) and Earth sensor control (25 percent of the time) was found to be the best way to compensate for antenna pointing error during orbit. This approach greatly minimizes the effects of thermal distortions on antenna beam pointing.
There is high uncertainty in the direct radiative forcing of black carbon (BC), an aerosol that strongly absorbs solar radiation. The observation-constrained estimate, which is several times larger than the bottom-up estimate, is influenced by the spatial representativeness error due to the mesoscale inhomogeneity of the aerosol fields and the relatively low resolution of global chemistry-transport models. Here we evaluated the spatial representativeness error for two widely used observational networks (AErosol RObotic NETwork and Global Atmosphere Watch) by downscaling the geospatial grid in a global model of BC aerosol absorption optical depth to 0.1° × 0.1°. Comparing the models at a spatial resolution of 2° × 2° with BC aerosol absorption at AErosol RObotic NETwork sites (which are commonly located near emission hot spots) tends to cause a global spatial representativeness error of 30%, as a positive bias for the current top-down estimate of global BC direct radiative forcing. By contrast, the global spatial representativeness error will be 7% for the Global Atmosphere Watch network, because the sites are located in such a way that there are almost an equal number of sites with positive or negative representativeness error.
No-vent fill / no-vent top-off (NVF/NVTO) is a method to enable the trans-fer of cryogenic propellants without the need to vent. Transferring propellants inmicrogravity environments is necessary to support the long-duration space missionsplanned for the coming decades. A key developmental milestone to developing thiscapability fully is the simulation and experimentation of NVF/NVTO in 1-g settings.This work seeks to advance the former by assessing the effectiveness of different heattransfer correlations used in a 1-g non-equilibrium model. Heat transfer correlationsfor natural convection and two-phase boiling heat transfer are compared against ex-perimental results for 34 different tests. Two distinct experiments, comprised of 21tests, are presented in detail here. These tests cover a variety of different injectionmethods, receiver tank geometries, receiver tank materials, cryogenic propellants, andinitial tank states. Overall for the cases tested in this work, the model was able topredict the pressure response within the receiver tank to a mean absolute percentageerror of 25.9%. The temperature response error rate was 29.5% and 24.9% for wall-gasand two-phase nodes, respectively. Compared to the worst case correlation set tested,the pressure prediction error rate represents a 31% improvement. For the cases pre-sented in this work, the mean pressure prediction error rate was 15.5%. Future workcould evaluate the effectiveness of this model against experiments conducted withdifferent propellants or different initial conditions. In its current form, however, themodel can still be used to help reduce design and testing time for 1-g experiments,enabling the quicker iteration that is necessary to meet the technological demands offuture space missions.
NASA’s Advanced Composites Project has established the goal of achieving a 30 percent reduction in the timeline for certification of primary composite structures for application on commercial aircraft. Prepreg tack is one of several critical parameters affecting composite manufacturing by automated fiber placement (AFP). Tack plays a central role in the prevention of wrinkles and puckers that can occur during AFP, thus knowledge of tack variation arising from a myriad of manufacturing and environmental conditions is imperative for the prediction of defects during AFP. A full design of experiments was performed to experimentally characterize tack on 0.25-inch slit-tape tow IM7/8552-1 prepreg using probe tack testing. Several process parameters (contact force, contact time, retraction speed, and probe diameter) as well as environmental parameters (temperature and humidity) were varied such that the entire parameter space could be efficiently evaluated. Mid-point experimental conditions (i.e., parameters not at either extrema) were included to enable prediction of curvature in relationships and repeat measurements were performed to characterize experimental error. Collectively, these experiments enable determination of primary dependencies as well as multi-parameter relationships. Slit-tape tow samples were mounted to the bottom plate of a rheometer parallel plate fixture using a jig to prevent modification of the active area to be interrogated with the top plate, a polished stainless steel probe, during tack testing. The probe surface was slowly brought into contact with the pre-preg surface until a pre-determined normal force was achieved (2-30 newtons). After a specified dwell time (0.02-10 seconds), during which the probe substrate interaction was maintained under displacement control, the probe was retracted from the surface (0.1-50 millimeters per second). Initial results indicated a clear dependence of tack strength on several parameters, with a particularly strong dependence on temperature and humidity. Although an increase in either of these parameters reduces tack strength, a maximum in tack was predicted to occur under conditions of low temperature and moderate humidity.