Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “textured surfaces”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

High-Temperature Air Stability of Electrodeposited Copper Cobalt Oxide and Copper Manganese Oxide Absorber Coatings for Concentrating Solar Power

The solar absorptance of a thermal receiver surface significantly affects the photothermal conversion efficiency of concentrating solar power (CSP) plants. The stability of solar receivers and coatings applied to improve solar absorptance at high temperatures is critical for efficient and long-term operation. This study analyzes the high-temperature air stability of multiscale fractal textured electrodeposited copper manganese oxide and copper cobalt oxide solar receiver coatings over a range of temperatures. The study also investigates the effect of high temperature on phase stability, chemical and morphological evolution, and the optical properties of the two solar absorber materials. A computational model is developed to determine the absorptance of the textured absorbers and is shown to match the experimental measurements closely over a range of heat treatment temperatures from 450 °C to 850 °C and durations up to 100 h. Degradation curves and coating stability maps are developed from the study. Copper manganese oxide and copper cobalt oxide coatings exhibit good thermal stability up to ~815 °C and 630 °C, respectively, with minimal changes in their optical and structural properties with thermal efficiency greater than 90%. Furthermore, the study offers valuable insights into the high-temperature annealing effects on the optical and structural properties of multiscale copper alloyed coatings fabricated by electrodeposition and presents a means of designing the optimal temperature range for maximizing absorber efficiency in practical applications.

14 SOLAR ENERGY↗
DOE OSTI2021

Identification of crystal plasticity model parameters by multi-objective optimization integrating microstructural evolution and mechanical data

Crystal plasticity models evolve a polycrystalline yield surface using meso-scale descriptions of deformation mechanisms. The activation of deformation mechanisms is governed by crystallography and a set of model parameters, which are typically calibrated through the fitting of mechanical data such as stress–strain curves and elastic lattice strains. Microstructural data such as phase fractions and texture evolution are used for verifying crystal plasticity parameters. In this study, we use a multi-objective genetic algorithm to identify hardening parameters from flow stress curves with an option to incorporate texture into the optimization approach. Robust, generalized objective functions are developed and used to identify sets of parameters pertaining to dislocation density-based hardening laws in visco-plastic and elasto-plastic self-consistent (VPSC and EPSC) homogenization models. First, the parameters are identified for pure Nb directly from texture using an objective function based on generalized spherical harmonics. Since texture evolution is driven by the relative contribution of active slip systems, the parameters governing the evolution of slip resistance ratios can be recovered from fitting discrete textures at a series of strains. Next, a comprehensive set of load reversal data for dual phase (DP) 780 steel is used to fit a hardening law and a back-stress law in EPSC. Finally, parameters pertaining to a complex hardening law for the evolution of slip and twinning in pure α-Ti are identified. Remarkably, using texture as an objective in combination with stress–strain objectives constrains the model of Ti to fully reproduce not only stress–strain and texture evolution but also hierarchical twinning measurements as a function of initial grain size and texture. Furthermore, given an appropriate model fit to representative experimental texture evolution, underlying twin volume fractions contributing to texture evolution can be predicted.

42 ENGINEERING↗
DOE OSTI2020

Analysis of Dust Samples Collected from an Inland ISFSI Site (''Site B'').

In October of 2020, dust samples were collected from the surface of spent nuclear fuel (SNF) dry storage canisters during an inspection at an inland Independent Spent Fuel Storage Installation, the second inland site at which surface deposits have been sampled. The purpose of the sampling was to assess the composition and abundance of the soluble salts present on the canister surface, information which provides a metric for potential corrosion risks. The samples were delivered to Sandia National laboratories for analysis. At Sandia, the soluble salts were leached from the dust and quantified by ion chromatography. In addition, subsamples of the dust were taken for scanning electron microscopy to determine the texture and mineralogy of the dust and salts. The results of those analyses are presented in this report.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Reconstructing porous media using generative flow networks

One area of intense scientific interest for the study of sandstones, carbonates, and shale at the pore scale is the use of limited image and petrophysical data to generate multiple realizations of a rock’s pore structure. Such images aid efforts to quantify uncertainty in petrophysical properties, including porosity–permeability transforms. We develop and evaluate a deep learning-based method to synthesize porous media volumes using a so-called generative flow model trained on x-ray microscope images of rock texture and pore structure. These models are optimized on a log-likelihood objective and they synthesize large and realistic three-dimensional images. Further, we demonstrate the rapid generation of sandstone image volumes that display realism as gauged by quantitative comparison of topological features using Minkowski functionals of porosity, specific surface area, and the Euler–Poincaré characteristic (i.e., pore connectivity). We also evaluate the single-phase permeability using Navier–Stokes and lattice Boltzmann methods and show that transport properties of the generated samples match measured trends.

58 GEOSCIENCES↗
DOE OSTI2020

Analysis of Dust Samples Collected from an Inland ISFSI Site (Site A)

In September of 2020, dust samples were collected from the surface of spent nuclear fuel (SNF) dry storage canisters during an inspection at an inland Independent Spent Fuel Storage Installation. The purpose of the sampling was to assess the composition and abundance of the soluble salts present on the canister surface, information which provides a metric for potential corrosion risks. The samples were delivered to Sandia National laboratories for analysis. At Sandia, the soluble salts were leached from the dust and quantified by ion chromatography. In addition, subsamples of the dust were taken for scanning electron microscope analysis to determine the texture and mineralogy of the dust and salts. The results of those analyses are presented in this report.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2025

Ubiquity and Causes of Soil Water Preferential Flow Across 17 Ecoregions

Abstract Preferential flow (PF) in soil causes the rapid transport of water, nutrients, and contaminants into the subsurface, influencing groundwater recharge and streamflow. Data scarcity has hindered the quantification of PF occurrence and the identification of its drivers across diverse ecoregions. We address this gap by analyzing high‐frequency, multi‐depth soil moisture data across 17 ecoregions in the USA, using ∼1,500 sensors at 40 sites. We discovered that PF is widespread, with sites experiencing PF in up to 60% of rainfall events ≥2 mm. Multiple approaches consistently show that PF is more likely to occur with increased peak rainfall intensity, finer textured material, low soil moisture variability, humid climate, and higher net primary productivity. This suggests that PF patterns could shift with projected climate changes, increasing uncertainty in predictions of groundwater recharge, water quality, and streamflow generation. Plain Language Summary Water can bypass part of the soil's matrix through a process called preferential flow (PF). This quick transport of water through the soil brings with it nutrients and contaminants and eventually makes it to groundwater and streams. To ensure ample amounts of good quality groundwater and surface water we need to understand when and where PF occurs. We inferred when PF occurred at 40 different sites across 17 ecoregions in the USA using soil moisture and rainfall data. We found that PF happened at all sites and in up to 60% of rainfall events ≥2 mm. Preferential flow was most likely at sites with high rainfall intensities, high clay content in soils, low variability in soil moisture, and high vegetation productivity. As rainfall intensities are predicted to increase due to climate change and vegetation becomes more productive, PF occurrence becomes more important for predicting groundwater recharge, water quality, and streamflow generation. Key Points Preferential flow (PF) is ubiquitous across the USA and occurs in up to 60% of all rainfall events ≥2 mm Rainfall intensity, soil texture, and antecedent soil moisture emerge as critical in generating PF across diverse ecoregions Two different PF detection approaches show similar relationships between key drivers and occurrence of PF

Li, Bonan↗
DOE OSTI2022

The Impact of Freeze‐Thaw History on Soil Carbon Response to Experimental Freeze‐Thaw Cycles

Abstract Freeze‐thaw is a disturbance process in cold regions where permafrost soils are becoming vulnerable to temperature fluctuations above 0°C. Freeze‐thaw alters soil physical and biogeochemical properties with implications for carbon persistence and emissions in Arctic landscapes. We examined whether different freeze‐thaw histories in two soil systems led to contrasting biogeochemical responses under a laboratory‐controlled freeze‐thaw incubation. We investigated controls on carbon composition through Fourier‐transform ion cyclotron resonance mass spectrometry (FT‐ICR‐MS) to identify nominal carbon oxidation states and relative abundances of aliphatic‐type carbon molecules in both surface and subsurface soils. Soil cores (∼60 cm‐depth) were sampled from two sites in Alaskan permafrost landscapes with different in situ freeze‐thaw characteristics: Healy (>40 freeze‐thaw cycles annually) and Toolik (<15 freeze‐thaw cycles annually). FT‐ICR‐MS was coupled with in situ temperature data and soil properties (i.e., soil texture, mineralogy) to assess (a) differences in soil organic matter composition associated with previous freeze‐thaw history and (b) sensitivity to experimental freeze‐thaw in the extracted cores. Control (freeze‐only) samples showed greater carbon oxidation in Healy soils compared with Toolik, even in lower mineral horizons where freeze‐thaw history was comparable across both sites. Healy showed the most loss of carbon compounds following experimental freeze‐thaw in the lower mineral depths, including a decrease in aliphatics. Toolik soils responded more slowly to freeze‐thaw as shown by intermediary carbon oxidation distributed across multiple carbon compound classes. Variations in the response of permafrost carbon chemistry to freeze‐thaw is an important factor for predicting changes in soil function as permafrost thaws in high northern latitudes.

Rooney, Erin C.↗
DOE OSTI2022

Investigation of deformation mechanisms in an advanced FeCrAl alloy using in-situ SEM-EBSD testing

The deformation mechanisms associated with uniaxial tensile testing are observed by conducting tensile experiments of an FeCrAl alloy using scanning electron microscopy (SEM) coupled with electron backscattered diffraction (EBSD). Prior to the deformation, investigated alloy was consisting grain and precipitate size of ~63.0 μm and ~6.7 μm, respectively. The recorded SEM micrographs and EBSD data at increasing levels of strains revealed the complex phenomena of slip bands’ formation in the presence of surface grain morphology evolution and their (001), (110) and (111) crystallographic planes distortions. The grains with orientation (110)||tensile direction (TD) shows higher shape change; however, (001)||TD and (111)||TD oriented grains show higher lattice gradient formation. Extracted information from the EBSD indicates that the crystallographic rotations drive towards specific, fiber-like texture in relation to the loading direction. Postmortem analysis of the recorded microstructure during the tensile deformation explains the phenomena of crack formation in the hard-intermetallic particles before the ultimate tensile strength (UTS). However, after the UTS, pores were identified in the neck that resulted from extensive plastic deformation. In-depth analysis was carried out to identify the cause of cracks and pores formation phenomena during the tensile test.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Enhanced Transport of TiO 2 in Unsaturated Sand and Soil after Release from Biodegradable Plastic during Composting

Biodegradable plastics can reach full degradation when disposed of appropriately and thus alleviate plastic pollution caused by conventional plastics. But additives can be released into the environment during degradation, and the fate of these additives can be affected by the degradation process. In this study, we characterized TiO 2 particles released from a biodegradable plastic mulch during composting and studied the transport of the released TiO 2 particles in inert sand and agricultural soil columns under unsaturated flow conditions. TiO 2 microparticles were released from the biodegradable plastic mulch in both single particle and cluster forms. The released TiO 2 microparticles were fully retained in unsaturated soil columns due to its ne texture, slow flow rate, and favorable attachment conditions. But in unsaturated sand columns, the released TiO 2 microparticles were highly mobile. Additionally, comparison with the pristine TiO 2 microparticles revealed that the enhanced mobility of the released TiO 2 microparticles was caused by the presence of compost residues which blocked attachment sites on the sand surface. This study demonstrates that TiO 2 microparticles can be released during composting of biodegradable plastics, and the transport potential of the released TiO 2 microparticles in the terrestrial environment can be enhanced by the presence of compost material.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Discovery of Gold Nanoparticles in Marcellus Shale

A high density of gold (Au) nanoparticles has been observed on the surfaces of the coexisting opal nanospheres in kerogen-bearing shales from the Marcellus Formation. Our analyses of the Au nanoparticles and associated minerals indicate that this represents a new formation type of colloidal gold nanoparticles. Additionally, the opal nanospheres are a new kind of natural opal-A that is characteristic of the mesoporous texture formed through oil-in-water emulsion processes. High-resolution transmission electron microscopy (TEM) combined with energy-dispersive X-ray spectroscopy analysis directly reveals spherical gold nanoparticles and gold nanorods associated with mesoporous opal nanospheres. Our newly found textures indicate that opal nanospheres may have facilitated the co-precipitation of pure gold nanoparticles in organic-bearing, reduced environments. Furthermore, our TEM observations provide distinct images of the initial phase of colloidal gold and silica, which may contribute to the formation of Au deposits involving "invisible" gold, secondary supergene enrichments, or high-grade gold accumulations. Finally, the discovery of Au nanoparticles in hydrocarbon-rich shale formations such as Marcellus (which contains 0.6-4.1 wt % gold/opal) suggests a potential for co-production of both gas/oil and gold-two valuable commodities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Grain size estimation in fluvial gravel bars using uncrewed aerial vehicles: A comparison between methods based on imagery and topography

Abstract Grain size assessments are necessary for understanding the various geomorphological, hydrological and ecological processes that occur within rivers. Recent research has shown that the application of Structure‐from‐Motion (SfM) photogrammetry to imagery from uncrewed aerial vehicles (UAVs) shows promise for rapidly characterising grain sizes along rivers in comparison to traditional field‐based methods. Here, we evaluated the applicability of different methods for estimating grain sizes in gravel bars along a study reach in the Olentangy River in Columbus, Ohio. We collected imagery of these gravel bars with a UAV and processed those images with SfM photogrammetry software to produce three‐dimensional point clouds and orthomosaics. Our evaluation compared statistical models calibrated on topographic roughness, which was computed from the point clouds, and to those based on image texture, which was computed from the orthomosaics. Our results showed that statistical models calibrated on image texture were more accurate than those based on topographic roughness. This might be because of site‐specific patterns of grain size, shape and imbrication. Such patterns would have complicated the detection of topographic signatures associated with individual grains. Our work illustrates that UAV‐SfM approaches show potential to be used as an accessible method for characterising surface grain sizes along rivers at higher spatial and temporal resolutions than those provided by traditional methods.

Wong, Tyler↗
DOE OSTI2021

Structure–Property Correlation of Hierarchically Porous Carbons for Fluorocarbon Adsorption

Although traditional commercially available porous carbon-fluorocarbon working pairs have shown promising applicability for adsorption cooling, advancements in synthetic carbons may further improve performance. Moreover, insights into structure-property relationships that target higher sorption capacities within these synthesized carbons may guide such materials' future design. We utilized hierarchically porous synthetic carbons (HPCs) with colossal microporous and mesoporous characterized by high surface areas (up to 2689 m 2 /g) and pore volumes (up to 10.31 cm 3 /g) towards fluorocarbon R134a adsorption. This unique pore topology leads to exceptional R134a uptake, ~250 wt.%, outperforming the highest uptake carbon material to date, Maxsorb III (~220 wt.%). Additionally, material characterizations reveal that the outstanding R134a capacity may be attributed to textural properties and oxygen-terminated functional groups more than graphitization of the material. Most importantly, HPCs are efficiently utilized in a two-bed model chiller device, where the performance shows excellent working capacity (105 wt%, ~1.5 times the value of reported carbon materials/R134a). Fluorocarbons adsorption on HPCs also displays fast kinetics (equilibrium time: ~2 min) mainly driven by physical adsorption (Qst: ~27 kJ/mol), characteristic of swiftly reversible behavior adsorption-desorption behaviors. This work provides a fundamental understanding of the applicability of HPCs/R134a working pair for adsorption cooling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Reversible writing/deleting of magnetic skyrmions through hydrogen adsorption/desorption

Abstract Magnetic skyrmions are topologically nontrivial spin textures with envisioned applications in energy-efficient magnetic information storage. Toggling the presence of magnetic skyrmions via writing/deleting processes is essential for spintronics applications, which usually require the application of a magnetic field, a gate voltage or an electric current. Here we demonstrate the reversible field-free writing/deleting of skyrmions at room temperature, via hydrogen chemisorption/desorption on the surface of Ni and Co films. Supported by Monte-Carlo simulations, the skyrmion creation/annihilation is attributed to the hydrogen-induced magnetic anisotropy change on ferromagnetic surfaces. We also demonstrate the role of hydrogen and oxygen on magnetic anisotropy and skyrmion deletion on other magnetic surfaces. Our results open up new possibilities for designing skyrmionic and magneto-ionic devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

The importance of accounting for landscape position when investigating grasslands: A multidisciplinary characterisation of a Californian coastal grassland

Data from the characterisation of the Point Reyes Field Site, published in AGU Earth's Future under the title: The importance of accounting for landscape position when investigating grasslands: A multidisciplinary characterisation of a Californian coastal grassland. This paper explored the effect of landscape position on the response of a Californian grassland to seasonal changes. All files are csv files. The EMI data contains 8 csv files with a metadata csv explaining the columns. The dataset also includes soil variables including total concentrations calculated from fused samples, then dissolved and measured on ICP-AES for whole-rock elements and ICP-MS for trace elements. Mineral composition was attained using X-ray diffraction at BL 11-3 at SSRL . Data was then run through the High Score database to characterise different mineral phases. total It also includes a table with bulk soil characteristics such as soil pH, cation exchange capacity, and soil textural data. Data from Teros 12 Meter soil moisture, electrical conductivity and temperature sensors are presented in SMS Csv file. While the WL bottom and top files contain data from Piezometers measuring the ground water table. We have included a csv file that contains soil CO2 efflux data from Feb 2021-Oct 2021 in the Point Reyes Grassland Experiment We have included the spatially orientated (easting northing) remotely sensed datasets that were used in the K-means clustering analysis conducted on our site with electrical conductivity, normalised difference vegetation index, elevation, slope, solar radiation, topographic position and wetness index, and a clustering score. Finally there is a list of all the identified grassland species at the site.For more information on flux data, please contact the corresponding author.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Mesoporous Textured Fe-N-C Electrocatalysts as Highly Efficient Cathodes for Proton Exchange Membrane Fuel Cells

A new platinum group metal (PGM)-free proton exchange membrane fuel cell (PEMFC) cathode catalyst materials, synthesized using the VariPore™ method by Pajarito Powder, LLC, are characterized for their structure and activity. The physico-chemical analysis of the iron-nitrogen-carbon (Fe-N-C) electrocatalysts show mesoporous carbon material effectively doped with iron and nitrogen. The materials have an average pore size of 7-8 nm and high specific surface area. The Fe-N-C catalysts exhibit good oxygen reduction reaction (ORR) activity in 0.5 M H2SO4 electrolyte with high half-wave potential and sustainable electrochemical stability over 10,000 repeated potential cycles with insignificant losses in their activities. As cathode catalysts in a PEMFC, the Fe-N-C materials deliver remarkably good fuel cell performance at low overpotential approaching that of the commercial Pt catalyst. The high ORR electrocatalytic activity of these Fe-N-C catalysts is credited to the synergy between nitrogen-moieties, specifically pyrrolic-N, pyridinic-N, and graphitic-N, and iron in addition to the high mesoporosity that facilitate an effective reaction path in boosting the electrocatalytic activity and stability.

DIRECT ENERGY CONVERSION↗
DOE OSTI2024

Exploring limitations in the induced polarization versus surface conductivity relationship in the case of wetland soils

Recent induced polarization studies suggest that the real part of surface conductivity (σ' surf ) scales linearly with the imaginary conductivity (σ'' = σ'' surf ) or normalized chargeability (Mn) for a range of soil types. The coefficients of this relationship l and l_Mn ( l = σ''/σ' surf or l_Mn = Mn/σ' surf ) allow the separation of the surface and electrolytic conductivities from the bulk conductivity. However, the dependence of these constants on varying soil physicochemical properties, including under unsaturated conditions, is yet to be assessed. Using estimates of σ' surf from 18 undisturbed soil samples from a restored wetland and σ'' measured over a frequency range of 0.01 Hz to 10 kHz, the σ' surf and σ'' were compared with the laboratory measurements of soil properties. Also, l and l_Mn were calculated for each soil sample and regressed them against the soil properties. We find an apparent dependence of l on soil texture, bulk density, organic matter, and moisture contents, with coefficients of determination (R 2 ) ranging from 0.5 to 0.65 at low frequencies (e.g., 1 Hz) but not at high frequencies (e.g., 936 Hz). This dependence of l on soil texture results from the insensitivity of σ'' at low frequency to σ' surf and, by implication, to the soil properties controlling σ' surf . In contrast, l_Mn indicates no correlation with the soil properties because Mn is linearly correlated with σ' surf and correlated with the soil properties controlling σ' surf . Finally, our results call for caution on the application of σ'' at a single frequency as a proxy of σ' surf because σ'' is not necessarily correlated with σ' surf across all soil types. Although using l_Mn derived from multifrequency measurements overcomes this limitation, field acquisition of spectral information (e.g., up to 1000 Hz) remains a challenge.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Conducting coatings for anodes, methods of making and using same, and uses thereof

Conducting coatings disposed on a metal member. The conducting coatings may have a desired texture and provide homoepitaxial or heteroepitaxial coating of an electrodeposited layer. A conducting coating may be formed by applying a shear force during deposition of the conducting coating. The conducting coatings may be used in anodes of various electrochemical devices. A conducting coating, which may be part of an electrochemical device, may have an electrochemically deposited layer disposed on at least a portion of a surface of the conducting coating. The electrochemically deposited layer may be reversibly electrochemically deposited.

Archer, Lynden A.↗