Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface catalysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Hidden Subsurface Reconstruction and Its Atomic Origins in Layered Oxide Cathodes

Structural transformations near surfaces of solid-state materials underpin functional mechanisms of a broad range of applications including catalysis, memory, and energy storage. It has been a long-standing notion that the outmost free surfaces, accompanied by broken translational symmetry and altered atomic configurations, are usually the birthplace for structural transformations. Here, in a layered oxide cathode for Li-ion batteries, we for the first time observe the incipient state of the well documented layered-to-spinel-like structural transformation, which is surprisingly initiated from subsurface layer, rather than the very surface. Coupling atomic level scanning transmission electron microscopy imaging with electron energy loss spectroscopy, we discover that the reconstructed subsurfaces, featuring a mix of discrete patches of layered and spinel-like structures, are associated with selective atomic species partition and consequent nanoscale non-uniform composition gradient distribution at the subsurface. In conclusion, our findings provide fundamental insights on atomic-scale mechanisms of structural transformation in layered cathodes.

25 ENERGY STORAGE↗
DOE OSTI2025

Isopotential Electron Titration of Ammonia Charge Transfer on Metal Catalysts

Electron transfer between adsorbates and surfaces determines the binding strength and reactivity of chemical moieties on materials designed for separations and catalysis. To quantify electron exchange, the extent of charge transfer resulting from ammonia adsorption on a Ru surface was measured by isopotential electron titration (IET) on a Ru catalytic condenser, where isopotential conditions were maintained between Ru and silicon separated by an insulating HfO 2 layer during gas phase ammonia adsorption. Charge transfer upon ammonia adsorption on a Ru catalytic condenser increased from 40 to 1200 nC/cm 2 at 75 and 225 °C, respectively. Charge transfer measurements provided a direct estimate of ammonia adsorption thermodynamics on Ru without knowing surface coverages a priori, revealing an adsorption enthalpy of −53 ± 10 kJ/mol and entropy of −61 ± 26 J/mol·K. Combining experimentally-measured charge transfer with kinetic Monte Carlo simulations informed adsorbate surface coverages determined that 0.058 electrons were transferred to the Ru surface for each molecular ammonia adsorption event (δ NH 3 = 0.058 ± 0.005 e – /NH 3 *), consistent with calculated Bader charges. The ability to measure the extent of charge transfer for adsorbed species provides a fundamental descriptor to understand existing and new chemically functional surfaces, providing a foundational method for the emerging field of thermochemical surface coulometry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Bulk Stoichiometry-Controlled Surface Reconstruction of Nanosized Ni−In Intermetallic Catalysts Steers Methanol Selectivity in CO2 Hydrogenation

Intermetallic compounds (IMCs) are attractive platforms for elucidating structure−catalysis relationships due to their ordered atomic structure and well-defined bulk composition. Yet, how their surfaces reconstruct under reaction conditions and how such reconstruction is governed by bulk stoichiometry remain poorly understood. Here, we show that SiO2-supported Ni−In IMCs undergo reaction-driven surface reconstruction during CO2 hydrogenation and that bulk stoichiometry can be used to steer this evolution toward methanol formation. Among the compositions examined (Ni2In1, Ni1In1, Ni2In3, and Ni1In2), Ni2In3/SiO2 exhibits the highest methanol selectivity (∼70%) and a methanol space-time yield of 652 mg·gmetal−1·h−1 at 250 °C and 30 bar. Combined structural, surface characterization, and kinetic analyses suggest that the intermetallic bulk remains largely preserved, whereas the surface departs from the stoichiometric bulk and evolves toward InOx-enriched surface domains coupled to an electron-rich Ni−In intermetallic phase. The extent of this evolution depends strongly on the bulk Ni:In stoichiometry and is most pronounced for Ni2In3/SiO2. These findings identify bulk stoichiometry as a handle for tuning the working-state surface of intermetallic catalysts and provide a basis for designing methanol synthesis catalysts through controlled surface reconstruction.

Wang, Caiqi [ORNL] (ORCID:0000000198849990)↗
NASA NTRS1986

Calculated ground state potential surface and excitation energies for the copper trimer

In the context of their relevance to catalysis and to materials science problems, transition metals and transition metal (TM) compounds are currently of considerable interest, and studies have been conducted of the copper trimer, Cu3. The present investigation is concerned with a study of the ground state surface and several groups of excited states in order to improve the understanding of the spectroscopy of Cu3. Differences of the current study from previous investigations are related to an employment of larger basis sets and a more extensive electron correlation. This was done with the objective to obtain a more accurate definition of the ground state surface. Features of the bonding in the copper dimer are considered to obtain a basis for an understanding of the copper trimer. Attention is given to calculational details, the ground state surface, and calculated vertical excitation energies. The results of SCF/SDCI calculations are reported for portions of the ground surface, for two groups of excited states, and for the ionization potential of Cu3.

Walch, S. P.↗
DOE OSTI2020

Pd3Ag(111) as a Model System for Hydrogen Separation Membranes: Combined Effects of CO Adsorption and Surface Termination on the Activation of Molecular Hydrogen

Abstract The co-adsorption of hydrogen and carbon monoxide on Pd 3 Ag(111) alloy surfaces has been studied as a model system for Pd-Ag alloys in membrane and catalysis applications using periodic density functional theory calculations (PW91-GGA). We explored the effects of Pd–Ag surface composition, since segregation of silver towards and away from the surface has been suggested to explain the experimentally observed changes in H 2 activation, CO inhibition and reactivity. We found that CO pre-adsorbed on the surface weakens the adsorption of H on Pd 3 Ag(111) alloy surfaces irrespective of whether the surface termination corresponds to the bulk Pd 3 Ag composition, or is purely Pd-terminated. A higher coverage of H with CO present is obtained for the Pd-terminated surface; this surface also exhibits a larger range of chemical potentials for co-adsorbed hydrogen and CO. The barrier for H 2 activation increases with increasing CO coverage, but the surface composition has the largest impact on H 2 activation at intermediate CO coverage. The results imply that Pd-based membranes with typically ~ 23 wt% Ag are less prone to CO poisoning if the surface becomes Pd-terminated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Functional CeO x nanoglues for robust atomically dispersed catalysts

Single-atom catalysts make exceptionally efficient use of expensive noble metals and can bring out unique properties. However, applications are usually compromised by limited catalyst stability, which is due to sintering. Although sintering can be suppressed by anchoring the metal atoms to oxide supports, strong metal–oxygen interactions often leave too few metal sites available for reactant binding and catalysis, and when exposed to reducing conditions at sufficiently high temperatures, even oxide-anchored single-atom catalysts eventually sinter. Here we show that the beneficial effects of anchoring can be enhanced by confining the atomically dispersed metal atoms on oxide nanoclusters or ‘nanoglues’, which themselves are dispersed and immobilized on a robust, high-surface-area support. We demonstrate the strategy by grafting isolated and defective CeO x nanoglue islands onto high-surface-area SiO 2 ; the nanoglue islands then each host on average one Pt atom. Further, we find that the Pt atoms remain dispersed under both oxidizing and reducing environments at high temperatures, and that the activated catalyst exhibits markedly increased activity for CO oxidation. We attribute the improved stability under reducing conditions to the support structure and the much stronger affinity of Pt atoms for CeO x than for SiO 2 , which ensures the Pt atoms can move but remain confined to their respective nanoglue islands. The strategy of using functional nanoglues to confine atomically dispersed metals and simultaneously enhance their reactivity is general, and we anticipate that it will take single-atom catalysts a step closer to practical applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Macroscale Control of Reactivity using 3D Printed Materials with Intrinsic Catalytic Properties

The morphology of heterogeneous catalysts can impact their performance. However, standard manufacturing methods like extrusion or pelleting offer little options for tailoring catalyst shape. Herein, stereolithographic 3D printing is used to produce catalysts with controlled topologies to enhance their performance. A series of magnetic stir-bar compartments (SBC) were 3D printed and tested as catalysts for sucrose hydrolysis. The SBC were printed using acrylic acid (AA) and 1,6-hexanediol diacrylate (HDDA) as acid sites and hydrophobic crosslinking domains, respectively. Variations in the number and tilt direction of the SBC blades produced significant changes in their apparent catalytic activities. These changes resulted from differences in the fraction of active surface effectively interacting with the reactants in solution, as revealed by computational fluid dynamics simulations. Moreover, varying HDDA:AA ratios in SBC regulated reactant-surface interactions to control catalytic activity. Overall, 3D printing catalysts enables quick performance optimization by simultaneously controlling macroscopic structure and molecular composition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Recommendations for improving rigor and reproducibility in site specific characterization

Heterogeneous catalysis is driven by the interaction of reactant molecules and the catalyst surface. The locus of this interaction as well as the surrounding ensemble of atoms is referred to as the catalyst active site. Active site characterization attempts to distinguish active catalytic sites from inactive surface sites, to elucidate the structural and chemical nature of active sites, and to quantify active site concentration. Numerous techniques have been demonstrated to provide compositional and structural information about the active sites within a catalyst. However, each technique has its own limitations and experimental pitfalls that can lead to data misinterpretation or irreproducible results. Further, this work aims to provide an overview of the types of data that can be collected, to outline common experimental challenges and how to avoid them, and to assemble relevant references for the most used active site characterization techniques. More broadly, we aim to outline best practices for researchers to collect, interpret, and report active site characterization data in a way that provides the most benefit to the broader catalysis community. Increasing the rigor and reproducibility of active site characterization offers a strategy to better link properties with catalytic performance and to enable the community to develop consensus concerning these relationships.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Surface facet dependence of competing alloying mechanisms

Metal alloys are ubiquitous in many branches of heterogeneous catalysis, and it is now fairly well established that the local atomic structure of an alloy can have a profound influence on its chemical reactivity. While these effects can be difficult to probe in nanoparticle catalysts, model studies using well defined single crystal surfaces alloyed with dopants enable these structure–function correlations to be drawn. The first step in this approach involves understanding the alloying mechanism and the type of ensembles formed. In this study, we examined the atomic structure of RhCu single-atom alloys formed on Cu(111), Cu(100), and Cu(110) surfaces. Our results show a striking difference between Rh atoms alloying in Cu(111) vs the more open Cu(100) and Cu(110) surface facets. Unlike Cu(111) on which Rh atoms preferentially place-exchange with Cu atoms in the local regions above step edges leaving the majority of the Cu surface free of Rh, highly dispersed, homogeneous alloys are formed on the Cu(100) and (110) surfaces. These dramatically different alloying mechanisms are understood by quantifying the energetic barriers for atomic hopping, exchange, swapping, and vacancy filling events for Rh atoms on different Cu surfaces through theoretical calculations. Density functional theory results indicate that the observed differences in the alloying mechanism can be attributed to a faster hopping rate, relatively high atomic exchange barriers, and stronger binding of Rh atoms in the vicinity of step edges on Cu(111) compared to Cu(110) and Cu(100). Furthermore, these model systems will serve as useful platforms for examining structure sensitive chemistry on single-atom alloys.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Cryogenic Reduction of Surface-Bound HKUST-1Crystallites

HKUST-1 is a canonical Cu-based metal-organic framework (MOF) with potential roles in catalysis. A convenient hydroxy double salt templating synthesis was used to produce a thin layer of HKUST-1 crystallites amenable to surface science spec-troscopies under controlled conditions. To study the nature of the Cu sites, N2 and CO2 were adsorbed at cryogenic tempera-tures as passive probe molecules for Cu2+ sites. CO, which is commonly used as a probe molecule of both Cu2+ and Cu1+ sites in porous materials, was found to be a non-innocent probe molecule that reduces the Cu2+ and forms CO2. Isotopically labeled 13CO confirmed the Cu2+ reduction and CO oxidation. The results offer a way to tune Cu oxidation states in HKUST-1, even in the cryogenic temperature regime.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Availability and reactivity of N 2 ( v ) for NH 3 synthesis by plasma catalysis

Production of vibrationally excited N 2 (N 2 (v)) in atmospheric pressure nonthermal plasma and loss of N 2 (v) by gas-phase reactions and reactions on catalytic surfaces are analyzed to examine the role of N 2 (v) in NH 3 formation by plasma catalysis. Vibrational state-to-state kinetic models complemented with molecular beam mass spectrometry (MBMS) measurements demonstrate that N 2 (v> 0) is produced with densities 100× greater than the density of N radicals by a radiofrequency atmospheric pressure plasma jet. The experimentally measured loss of N 2 (v) corresponds with a state-to-state kinetic model that describes loss of N 2 (v) by surface-mediated vibrational relaxation without consideration of reactions that convert N 2 (v) to NH 3 over the catalyst surface. Rate constants for vibrational relaxation of N 2 (v) on catalyst surfaces exceed upper bounds on proposed rate constants for NH 3 formation reactions from N 2 (v) over Fe when v < 9, Ni when v < 18, and Ag when v < 39, which indicates that only higher vibrational levels can possibly contribute to catalytic NH 3 formation faster than they undergo vibrational relaxation on the surface. Densities of N 2 (v> 8), vibrational levels that can possibly react over Fe to form NH 3 faster than they undergo vibrational relaxation, are less than or similar to N densities at the inlet of the catalyst bed and measured NH 3 formation for the investigated conditions in this work, while densities of N 2 (v> 17) and N 2 (v> 38) are orders of magnitude below the N density at the inlet of the catalyst bed and the measured NH 3 formation. The loss of N 2 (v) by vibrational relaxation on the surface limits the ability of N 2 (v) to contribute to catalytic NH 3 formation and explains why N 2 (v) does not produce NH 3 in quantities that are comparable to NH 3 formation from N even though N 2 (v > 0) is more abundantly produced by the plasma.

state-to-state kinetic modeling↗
DOE OSTI2023

Solution Structure and Hydration Forces between Mica and Hydrophilic Versus Hydrophobic Surfaces

Solid-liquid interfaces are central to a range of interesting phenomena including catalysis, heterogeneous nucleation, water desalination, and biomolecular assembly. While three-dimensional Fast Force Mapping (3D FFM) has emerged as a technique for resolving interfacial solution structure at the molecular scale, key challenges for data interpretation persist, most notably regarding the influence of the probe on the measured structure. Using the mica-water system as a case study, we investigate the effect of hydrophilic and hydrophobic probes on interfacial solution structure measured by 3D FFM. Data from hydrophilic silicon-based probes are in good agreement with molecular dynamics simulations, wherein the innermost water molecules adsorb preferentially at the surface ditrigonal cavity sites followed by two subsequent hydration layers. In contrast, the hydrophobic carbon-based probes detect vertical oscillatory features, but do not show lateral patterning that matches the underlying mica lattice. At high ionic strength, up to six of these oscillatory features are observed extending 2 nm into the solution phase with an average spacing of 0.29 ± (0.04) nm. Further, we also determine that the repulsive hydration force between mica and the hydrophilic probe depends on the nature and concentration of ions in solution. Specifically, solutions with stronger ion-water and ion-ion interactions increase the interfacial viscosity, which results in a stronger repulsive hydration force as the probe approaches the surface. Based on these observations, we present a scheme for controlling the outcomes of particle attachment and aggregation by varying the solution conditions to tune the hydration force.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Surface Terminations of LaAlO 3 Perovskite Nanoparticles as Viewed by Solid-State Nuclear Magnetic Resonance

Nanocrystal surfaces generally undergo reconstructions that differentiate them from the bulk structures, often in nontrivial ways. Understanding these terminations is critical across diverse fields, from heterogeneous catalysis to the formation of topological states and the synthesis of semiconductor nanomaterials. Determining surface structures is currently an interdisciplinary task, most often involving high-resolution electron microscopy and surface electron diffraction. These methods, however, do not provide a global view of the ensemble of structures present in a sample. Here, we show how surface-sensitive solid-state nuclear magnetic resonance (SSNMR) spectroscopy methods can bridge this gap. In this context, we investigated the surface structure of lanthanum aluminate (LaAlO 3 ) perovskite nanoparticles. Four distinct surface terminations have previously been observed for this material, but their relative abundances were unknown. Using an array of double- and triple-resonance SSNMR methods probing the relative proximities of surface 1 H, 27 Al, 17 O, and 139 La nuclei, we conclude the surface to be majority terminated (80%) by AlO x with substantial (20%) LaO x terminated regions.

Materials↗
DOE OSTI2021

Determination of rutile transition metal oxide (110) surface terminations by scanning tunneling microscopy contrast reversal

The surfaces of rutile transition-metal oxides (TMO 2 ) are widely investigated for catalysis, photoelectrochemical solar cells, memristors, and supercapacitors, but their structures have remained controversial. Here we employ density functional theory to predict that a universal behavior of metallic TMO 2 surfaces, i.e., the stoichiometric TMO 2 surfaces, exhibit a contrast reversal in simulated scanning tunneling microscopy (STM) images at different scanning biases. The predictions are verified by experimental STM imaging of RuO 2 (110) surfaces and this feature is shown to enable accurate determinations of the TMO 2 (110) surface structures under various conditions. This research provides different insights into the electronic properties of TMO 2 (110) surfaces and offers an effective method to directly map the surface structure and point defects using bias-dependent STM.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1983

Test program to demonstrate the stability of hydrazine in propellant tanks

The suitability of stainless steels and Inconel for long-term hydrazine propellant-storage tanks is investigated. Rectangular coupon samples cut from propellent tanks were sealed with a measured amount of hydrazine in glass capsules, stored at 43 or 60 C, and removed after 6 to 24 months, when corrosion of the coupon and decomposition of the hydrazine was determined, and SEM and electron spectroscopy were performed on some coupons. Corrosion was found to be unmeasurably low for all the coupons, and hydrazine decomposition produced less than 1.0 cu cm of gas per sq cm of wetted surface per year, except in those few cases when catalysis or contamination were detected. Especially good stability was observed for type 304L stainless steel. The decomposition rates determined in the coupon tests are confirmed by preliminary results of actual tank storage trials.

Moran, C. M.↗
DOE OSTI2023

Impact of Electrolyte Composition on Bulk Electrolysis of Furfural over Platinum Electrodes

Partial oxidation of furanic biomass derivatives such as furfural is of interest for the sustainable production of chemicals including furoic acid, maleic acid, and 2,5-furandicarboxylic acid (FDCA). The oxidative bulk electrolysis of furfural is here investigated on platinum electrodes in acidic media. The effects of potential, concentration, pH, and supporting anion are studied, and selectivity trends are coupled with attenuated total reflectance surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS) to illuminate adsorbate structures that influence the catalysis. Increasing potential is found to shift selectivity from primarily C 5 products to C 4 products, coincident with oxidation of the Pt surface. Selectivity changes are also observed moving from pH 1 to pH 4, with an increase in C 5 products at higher pH. Furthermore, changing from the weakly adsorbing perchlorate anion to the specifically-adsorbing phosphate anion results in a number of changes that manifest differently depending on potential and pH. Selectivity to furoic acid is found to be highest above the pKa of phosphoric acid due to the strongly adsorbed phosphate ions suppressing flat-lying configurations of furfural that lead to C−C cleavage. These results point toward opportunities to use electrolyte engineering to tune selectivity and optimize surface conditions to disfavor binding of inhibitory products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

The physical chemistry of solar fuels catalysis

The demonstration of effective light-driven electrochemical water splitting at the surface of a TiO 2 electrode in the seminal 1972 Honda–Fujishima publication spurred global research efforts to understand this effect and design advanced systems for solar H 2 generation from water as a carbon-free and sustainable fuel. In the 50+ years since that discovery, research investigating approaches toward the catalytic generation of the so-called “solar fuels,” i.e., not only H 2 from water but also CO 2 reduction products and NH 3 from N 2 , has expanded dramatically in scope and scale. The development of new experimental and computational methods and construction and commissioning of large-scale facilities have paved the way for important insights into the machinery of natural photosynthesis, leading to a greater understanding of the complexity of light-to-chemical energy conversion with an exquisite temporal and spatial resolution. Finally, these studies have provided the foundation for biologically inspired molecular and hybrid designs with the goal to promote the photochemical steps critical to solar fuels generation while avoiding unproductive or unnecessary pathways.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Tomographic optical emission spectroscopy of atmospheric pressure plasma interacting with complex surfaces

Plasma distribution in 3D space is heavily influenced by complex surfaces and the coupling interactions between plasma properties and interfacing material properties. For example, guided streamers that transition to surface ionization waves (SIWs) and propagate over structured dielectrics experience field enhancements that can lead to localized increases in ionization rates and complex 3D configurations that are difficult to analyze. Investigating these configurations requires techniques than can provide a more complete 3D picture. To help address this capability gap, a tomographic optical emission spectroscopy (tomo-OES) diagnostic system has been developed at Sandia National Laboratories that can resolve SIWs. The system includes four intensified cameras that measure the angular projections of the plasma light emission through bandpass filters. A dot calibration target co-registers each angular projection to the same voxel grid and an algebraic reconstruction technique (ART) recovers the light intensity at each voxel. An atmospheric pressure plasma jet (APPJ), provided by Peter Bruggeman, has been investigated and representative results are shown in Figure 1. Here, a bandpass filter was used to isolate emission from the N 2 second positive system (SPS) at 337.1 nm to capture the transition of the streamer to SIW on a planar dielectric surface (relative permittivity 3.3) located 3 mm below the APPJ [3]. The surface wave velocity was 3.5x10 4 (m/s), consistent with measurements made by Steven Shannon. Characterization of this APPJ will support the group effort of standing up a reproducible APPJ across institutions for applications such as liquid treatment, catalysis, and plasma aided combustion. Future work will investigate non-planar surfaces and eventually develop tomographic laser-induced fluorescence (tomo-LIF) approaches.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗