SEARCH · Engineering Papers

Results for “strength”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

All sources NASA NTRS DOE OSTI

DOE OSTI2025

Shear strength of a refractory high entropy alloy MoNbTaVW under high pressure

Radial X-ray diffraction (R-XRD) was performed in situ using a Panoramic Diamond Anvil Cell on the refractory high entropy alloy MoNbTaVW. The lattice parameters were determined through a Le Bail fit using a body centered cubic (BCC) lattice of symmetry $Im$$\overline{3}$$m$ (international space group number 229). Upper and lower bounds to the shear strength were determined up to 80 GPa nonhydrostatically using copper as a pressure standard. The equation of state was derived at the magic angle ψ = 54.7° and yielded a bulk modulus of K 0 = 220.8 ± 1.65 GPa. The experimental lattice parameters and bulk modulus match closely with corresponding density functional theory (DFT) calculations. The BCC phase remains stable up to the highest pressure of 80 GPa studied and is shown to be elastically anisotropic. The shear strength was found to saturate around 70 GPa with a value of τ = 1.75 GPa, and the shear moduli are presented in different limits of iso-strain and iso-stress.

36 MATERIALS SCIENCE↗

DOE OSTI2020

CI-MBPT line strengths and atomic probabilities for some transitions of neutral iodine

Iodine is a promising alternative to expensive xenon as a propellant for electric propulsion devices. Iodine optical spectroscopy is a valuable diagnostic tool for optimization of the iodine propellant. Recently, some measurements have been conducted with cells containing iodine plasma, and iodine atomic absorption at several wavelengths (911, 906, 206 and 1315 nm) was measured with a Ti:sapphire laser. Motivated by these experiments and future applications, here we have calculated line strengths and atomic probabilities for the transitions between different types of 5s 2 5p 5 , 5s 2 5p 4 6s, 5s 2 5p 4 6p and 5s 2 5p 4 5d states of atomic iodine, using configuration-interaction many-body perturbation theory. Since experimental transition data for atomic iodine are only available for a relatively small number of transitions, we also performed calculations for the bromine atom, to further validate our approach. We found good agreement between our theory and available experimental data for both elements in most cases. Therefore, we believe that our predicted line strengths and transition probabilities are quite reliable and will be useful for iodine spectroscopy.

74 ATOMIC AND MOLECULAR PHYSICS↗

DOE OSTI2022

High pressure phase transition and strength estimate in polycrystalline alumina during laser-driven shock compression

Alumina (Al 2 O 3 ) is an important ceramic material notable for its compressive strength and hardness. It represents one of the major oxide components of the Earth's mantle. Static compression experiments have reported evidence for phase transformations from the trigonal α-corundum phase to the orthorhombic Rh 2 O 3 (II)-type structure at ~90 GPa, and then to the post-perovskite structure at ~130 GPa, but these phases have yet to be directly observed under shock compression. In this work, we describe laser-driven shock compression experiments on polycrystalline alumina conducted at the Matter in Extreme Conditions endstation of the Linac Coherent Light Source. Ultrafast x-ray pulses (50 fs, 10 12 photons/pulse) were used to probe the atomic-level response at different times during shock propagation and subsequent pressure release. At 107 ± 8 GPa on the Hugoniot, we observe diffraction peaks that match the orthorhombic Rh 2 O 3 (II) phase with a density of 5.16 ± 0.03 g cm –3 . Upon unloading, the material transforms back to the α-corundum structure. Upon release to ambient pressure, densities are lower than predicted assuming isentropic release, indicating additional lattice expansion due to plastic work heating. Furthermore, using temperature values calculated from density measurements, we provide an estimate of alumina's strength on release from shock compression.

33 ADVANCED PROPULSION SYSTEMS↗

DOE OSTI2025

Origin of the Low-Energy Enhancement of the γ-Ray Strength Function

The low-energy enhancement (LEE) in γ-ray strength functions has been experimentally identified in a large number of nuclei during the past two decades; however, the origin of the enhancement is not fully understood. Building on previous theoretical work, we investigate the LEE and its relation to the scissors mode (SM) with an independent theoretical approach. We apply a novel angular-momentum-projected shell-model method that explicitly endows degrees of freedom to describe the scissors motion. Taking the recently measured γ-ray strength functions in Neodymium isotopes as examples, we find that the LEE arises from a quasi-free scissors motion appearing only in weakly-deformed nuclei, which can be viewed as an approximate free-rotation of neutrons with respect to protons. This leads us to propose a new type of collective motion, scissors rotation, to contrast the scissors vibration widely known in well-deformed nuclei. The observed LEE is naturally interpreted as the first evidence for this collective excitation mode.

Collective models↗

DOE OSTI2022

Rotational flexural strength of cylindrical brittle specimens

Conventional static flexural strength testing of brittle cylindrical rods only subjects a small fraction of the entire specimen's area or volume to the maximum tensile stress. Thus, a nonconservative measured strength likely results since most flaws on the surface or in the bulk are not subjected to a sufficiently high tensile stress that can cause fracture. Here, to mitigate this, a rotational flexural tester and corresponding test method were developed whereby rotation and monotonically increasing three-point flexure were superimposed to investigate fracture response of solid glass cylinders. This combination of rotation and flexure subjects more area and volume of a cylindrical test specimen to tensile stress than a standard static (nonrotating) flexural test. As anticipated, failure stresses were lower for the rotational flexural test. Expressions for effective area and volume are provided for rotating solid rods and tubes subjected to three-point, four-point, uniform, and uniformly distributed load bending configurations.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Parameter Calibration for Johnson Cook and Preston-Tonks-Wallace Material Strength Models with Uncertainty Quantification

In this study we perform a Bayesian calibration of the parameters in the Johnson Cook (JC) material strength model, with uncertainty, using experiments with for a range of low and medium strain rates. For the parameter calibration, we used a variational Bayesian approach with experimental data from Hopkinson bar and quasi-static tests done on Oxygen Free High Conductivity (OFHC) copper. The estimated parameter values matched well with experimental data for a modest range of strain rates and temperatures. Through this method, we also recovered uncertainty and correlation information for the estimated parameter values. We also compared our results to a calibration of parameters in the Preston-Tonks-Wallace (PTW) material strength model, using the same variational Bayesian method. The parameters estimated for both models provided good agreement with the experimental data.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Frequency Emitter Geolocation Using Signal Strength Fingerprinting Informed By 3D Propagation Modeling

This work focuses on the problem of RF geolocation in complex multipath environments. Using 3D electromagnetic propagation modeling to characterize environments of interest will enable more accurate RF geolocation. Specifically, a path-loss radio map can be generated in simulation for use in received signal strength indicators (RSSI) fingerprinting, or pattern matching. RSSI fingerprinting is an example of data-based method that takes site specific information into account which should allow for better performance than other model-based methods that use a generalized model of electromagnetic propagation. This modeling capability will also be used to evaluate the relative performance of RSSI fingerprinting, pathloss model based RSSI methods such as differential received signal strength circles (DRSS), RSSI joint gaussian estimation, and time-difference of arrival (TDOA). New methods using this simulation derived electromagnetic characterization could improve the efficacy of currently deployed and future RF spectral monitoring solutions. Wireless InSite developed by Remcom is used as the simulation tool of choice in this work. An indoor location is simulated with a grid of fixed receivers and a grid of transmit locations. Using the output of the Wireless InSite simulation the response from a given transmit location to a given receive location can be generated. During the first year of the project various geolocation methods evaluated on purely synthetic, but realistic, data. The second year focused on testing and validating the efficacy of simulation informed RF geolocation using two physical testbeds. This work has shown that data-based approaches are more accurate than model-based ones at the expensive of requiring measured or simulated site-specific training data.

47 OTHER INSTRUMENTATION↗

DOE OSTI2024

Small scale tensile testing technique for measuring grain boundary strength of neutron-irradiated materials in focused ion beam systems

Irradiation induced defects on grain boundaries (GBs) can lead to GB strength degradation and cause intergranular cracking in structural materials, affecting the safe operation and service life of nuclear reactors. Establishing the quantitative relationship between the strength and character/microchemistry for individual GB in an effort of integrating experimental measurements and multiscale simulations.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Microstructure–Property Correlation in a Laser Powder Bed Fusion Processed High-Strength AF-9628 Steel

Laser powder bed fusion additive manufacturing (LPBF-AM) of a low-alloy, high-performance AF-9628 steel results in exceptionally high strength and good ductility. The reasons for such mechanical properties are investigated through detailed microscopy performed at several length scales. Thus, the characterization of melt pool, porosity, grain morphology, phases, and dislocations is performed in the as-printed material. The as-printed material consists of only 0.004 vol% of uniformly distributed porosity, single-phase martensitic laths with an average lath size of ≈2.5 μm, the absence of carbides indicating interstitial trapping of C atom, and high dislocation density in the martensitic laths. Experimental data through microscopy are then fed in analytical models for calculating strengthening contributions from various strengthening mechanisms. Calculated yield strength agrees well with experimentally determined value, and therefore, activation of various strengthening mechanisms is established in as-printed AF-9628.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Interfacial Strength in Hierarchical Carbon Fiber Composites: Interplay of Interphase Modulus and Roughness

A facile, direct deposition approach that exploits van der Waals interactions between carbonaceous materials is utilized to create unidirectional hybrid carbon fiber composites. Two small molecule crosslinkers, a trifunctional aromatic (TL) and a difunctional aliphatic (DL) acyl chloride, are first utilized to create a crosslinked interphase with a softer and stiffer modulus respectively. TL crosslinked interphase with a higher modulus improved the tensile strength by 50%, despite non-covalent linking between fiber and matrix, elucidating the critical role of the interphase in alleviating modulus mismatch between the high modulus carbon fiber and the rubbery matrix. Fractional quantities of carbon nanotubes are additionally dispersed in the small molecule crosslinkers which behaved as a dispersant, helping introduce nanoasperities on the carbon fiber surface. Strong “pi-pi” interactions between CNTs and CF contributed to tensile properties, which are increased by 66% compared to the control. A cohesive zone model suggests that a stiffer interphase is better able to exploit surface heterogeneities and roughness on the fiber, synergistically enhancing interfacial strength.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Influence of Intracrystalline Ionic Strength in MFI Zeolites on Aqueous Phase Dehydration of Methylcyclohexanols

Abstract The impact of the concentration of hydrated hydronium ions and in turn of the local ionic strength in MFI zeolites has been investigated for the aqueous phase dehydration of 4‐methylcyclohexanol (E1 mechanism) and cis ‐2‐methylcyclohexanol (E2 mechanism). The E2 pathway with the latter alcohol led to a 2.5‐fold higher activity. The catalytic activity normalized to the hydronium ions (turnover frequency, TOF) passed through a pronounced maximum, which is attributed to the increasing excess chemical potential of the alcohols in the pores, increasing in parallel with the ionic strength and the additional work caused by repulsive interactions and charge separation induced by the bulky alcohols. While the maximum in rate observed is invariant with the mechanism or substitution, the reaction pathway is influencing the activation parameters differently.

Milaković, Lara↗

DOE OSTI2022

Maximum Impact of Ionic Strength on Acid‐Catalyzed Reaction Rates Induced by a Zeolite Microporous Environment

Abstract The intracrystalline ionic environment in microporous zeolite can remarkably modify the excess chemical potential of adsorbed reactants and transition states, thereby influencing the catalytic turnover rates. However, a limit of the rate enhancement for aqueous‐phase dehydration of alcohols appears to exist for zeolites with high ionic strength. The origin of such limitation has been hypothesized to be caused by the spatial constraints in the pores via, e.g., size exclusion effects. It is demonstrated here that the increase in turnover rate as well as the formation of a maximum and the rate drop are intrinsic consequences of the increasingly dense ionic environment in zeolite. The molecularly sized confines of zeolite create a unique ionic environment that monotonically favors the formation of alcohol‐hydronium ion complexes in the micropores. The zeolite microporous environment determines the kinetics of catalytic steps and tailors the impact of ionic strength on catalytic rates.

Liu, Qiang↗

DOE OSTI2022

Maximum Impact of Ionic Strength on Acid‐Catalyzed Reaction Rates Induced by a Zeolite Microporous Environment

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Probing Noncovalent Interaction Strengths of Host-Guest Complexes Using Negative Ion Photoelectron Spectroscopy

Noncovalent interactions (NCIs) are crucial for the formation and stability of host-guest complexes, which have wide-ranging implications across various fields, including biology, chemistry, materials science, pharmaceuticals, and environmental science. However, since NCIs are relatively weak and sensitive to bulk perturbation, direct and accurate measurement of their absolute strength has always been a significant challenge. This concept article aims to demonstrate the gas-phase electrospray ionization (ESI)-negative ion photoelectron spectroscopy (NIPES) as a direct and precise technique to measure the absolute interaction strength, probe nature of NCIs, and reveal the electronic structural information for host-guest complexes. Here, our recent studies in investigating various host-guest complexes that involve various types of NCIs such as anion–π, (di)hydrogen bonding, charge-separated ionic interactions, are overviewed. Finally, a summary and outlook are provided for this field.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

An integrated EOS, pore‐crush, strength and damage model framework for near‐field ground‐shock

Abstract An integrated Equation of State (EOS) and strength/pore‐crush/damage model framework is provided for modeling near to source (near‐field) ground‐shock response, where large deformations and pressures necessitate coupling EOS with pressure‐dependent plastic yield and damage. Nonlinear pressure‐dependence of strength up to high‐pressures is combined with a Modified Cam‐Clay‐like cap‐plasticity model in a way to allow degradation of strength from pore‐crush damage, what we call the “Yp‐Cap” model. Nonlinear hardening under compaction allows modeling the crush‐out of pores in combination with a fully saturated EOS, that is, for modeling partially saturated ground‐shock response, where air‐filled voids crush. Attention is given to algorithmic clarity and efficiency of the provided model, and the model is employed in example numerical simulations, including finite element simulations of underground explosions to exemplify its robustness and utility.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2025

Development of a Printable Prill Formulation Technique and Demonstration of Monomodal Prill Size on Compaction Density and Compressive Strength

Polymer-bonded explosive molding powder, or “prills,” are relied on for the fabrication of pressed high explosives since the 1950's. The wet granulation technique, also known as “slurry coating,” that is used to formulate prills, is a complex process that results in polydisperse and variable yields. This makes it difficult to study the mesoscale effect that prills have on the microstructure of a pressed article. The following study introduces a novel approach to energetic granulation that leverages techniques used in the additive manufacturing of paste-like energetic materials. This extrusion granulation, or prill printing technique, makes it possible to tailor the sizes and shapes of prills, allowing for their morphological influences to be studied in a controlled manner. The following work details the fabrication and characterization of four monomodal size lots of prills using an inert formulation (95 wt.% melamine, 5 wt.% polymer binder). Prills from each size lot were die-pressed using a fixed recipe to investigate how prill size impacts compaction density and therefore compressive strength. It was found that larger prills influence the pressing density by creating larger defects within the microstructure of a pressed article, resulting in a decrease in compressive strength.

direct ink write↗

DOE OSTI2023

Solid Phase Processing of Mg-Al-Mn-Ca for High Strength and Ductility

While rare-earth Mg alloys have remarkable properties for high strength applications, lower cost alternatives are necessary for the widespread industry use of Mg. Ca added Mg alloys have shown promise as an alternative to rare-earth alloys. Ca-based precipitates can reduce basal texture, reduce casting porosity, and increase mechanical strength. However, the accumulation of Ca-based precipitates along inter-dendritic regions can severely limit ductility. Here, we apply two solid phase processing techniques, friction stir processing and shear assisted processing and extrusion, to produce wrought microstructure sheet and extruded tubes from a cast Mg-Al-Mn-Ca alloy. Ductility of the alloy is enhanced by densification under applied force and elevated temperature, grain refinement, and refinement of (Al,Mg)-Ca based precipitate.

Garcia, David↗

DOE OSTI2020

Surface engineering to enhance heat generation and joint strength in dissimilar materials AZ31 and DP590 ultrasonic welding

A multiscale simulation approach was developed and employed to optimize the sheet surface conditions for higher interfacial temperature and joint strength in ultrasonic welding of magnesium alloy AZ31 and dual-phase steel DP590. First, a mesoscale model was used to study the relationship between friction coefficient and surface roughness, which can be modified by various engineering methods. Then a macroscopic process model was employed to study the effects of surface roughness on heat generation, indicating that a temperature increase can be achieved with rougher surfaces on two sides of both DP590 and AZ31 sheets. Samples prepared by sanding and filing, as well as grinding, were first characterized for surface roughness and then welded under ultrasonic vibration. An infrared camera was used to measure temperatures in situ for model validation. Overall, lap shear test results for the welded joint showed that the joint strength can be improved by 10~25% using filing and round grinding methods as a result of the enhanced heat generation and mechanical interlocking on the interface.

42 ENGINEERING↗