Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “standard”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Observations on the Reliability of Rubidium Frequency Standards on Block 2/2A GPS Satellites

Currently, the block 2/2A Global Positioning System (GPS) satellites are equipped with two rubidium frequency standards. These frequency standards were originally intended to serve as the back-ups to two cesium frequency standards. As the constellation ages, the master Control Station is forced to initialize and increasing number or rubidium frequency standards. Unfortunately the operational use of these frequency standards has not lived up to initial expectations. Although the performance of these rubidium frequency standards has met and even exceeded GPS requirements, their reliability has not. The number of unscheduled outage times and the short operational lifetimes of the rubidium frequency standards compare poorly to the track record of the cesium frequency standards. Only a small number of rubidium frequency standards have actually been made operational. Of these, a large percentage have exhibited poor reliability. If this trend continues, it is unlikely that the rubidium frequency standards will help contribute to the navigation payload meeting program specification.

Dieter, Gary L.↗

NASA Technical Standards Program

The NASA Technical Standards Program was officially established in 1997 as result of a directive issued by the Administrator. It is responsible for Agency wide technical standards development, adoption (endorsement), and conversion of Center-unique standards for Agency wide use. One major element of the Program is the review of NSA technical standards products and replacement with non-Government Voluntary Consensus Standards in accordance with directions issued by the Office of Management and Budget. As part of the Program's function, it developed a NASA Integrated Technical Standards Initiative that consists of and Agency wide full-text system, standards update notification system, and lessons learned-standards integration system. The Program maintains a 'one stop-shop' Website for technical standards ad related information on aerospace materials, etc. This paper provides information on the development, current status, and plans for the NAS Technical Standards Program along with metrics on the utility of the products provided to both users within the nasa.gov Domain and the Public Domain.

Gill, Paul S.↗

NASA Technical Standards Program

The NASA Technical Standards Program was officially established in 1997 as result of a directive issued by the Administrator. It is responsible for Agency wide technical standards development, adoption (endorsement), and conversion of Center-unique standards for Agency wide use. One major element of the Program is the review of NSA technical standards products and replacement with non-Government Voluntary Consensus Standards in accordance with directions issued by the Office of Management and Budget. As part of the Program s function, it developed a NASA Integrated Technical Standards Initiative that consists of and Agency wide full-text system, standards update notification system, and lessons learned - standards integration system. The Program maintains a "one stop-shop" Website for technical standards ad related information on aerospace materials, etc. This paper provides information on the development, current status, and plans for the NAS Technical Standards Program along with metrics on the utility of the products provided to both users within the nasa.gov Domain and the Public Domain.

Gill, Paul S.↗

Achieving Innovation and Affordability Through Standardization of Materials Development and Testing

The successful expansion of development, innovation, and production within the aeronautics industry during the 20th century was facilitated by collaboration of government agencies with the commercial aviation companies. One of the initial products conceived from the collaboration was the ANC-5 Bulletin, first published in 1937. The ANC-5 Bulletin had intended to standardize the requirements of various government agencies in the design of aircraft structure. The national space policy shift in priority for NASA with an emphasis on transferring the travel to low earth orbit to commercial space providers highlights an opportunity and a need for the national and global space industries. The same collaboration and standardization that is documented and maintained by the industry within MIL-HDBK-5 (MMPDS-01) and MIL-HBDK-17 (nonmetallic mechanical properties) can also be exploited to standardize the thermal performance properties, processing methods, test methods, and analytical methods for use in aircraft and spacecraft design and associated propulsion systems. In addition to the definition of thermal performance description and standardization, the standardization for test methods and analysis for extreme environments (high temperature, cryogenics, deep space radiation, etc) would also be highly valuable to the industry. Its subsequent revisions and conversion to MIL-HDBK-5 and then MMPDS-01 established and then expanded to contain standardized mechanical property design values and other related design information for metallic materials used in aircraft, missiles, and space vehicles. It also includes guidance on standardization of composition, processing, and analytical methods for presentation and inclusion into the handbook. This standardization enabled an expansion of the technologies to provide efficiency and reliability to the consumers. It can be established that many individual programs within the government agencies have been overcome with development costs generated from these nonstandard requirements. Without industry standardization and acceptance, the programs are driven to shoulder the costs of determining design requirements, performance criteria, and then material qualification and certification. A significant investment that the industry could make to both reduce individual program development costs and schedules while expanding commercial space flight capabilities would be to invest in standardizing material performance properties for high temperature, cryogenic, and deep space environments for both metallic and nonmetallic materials.

Bray, M. H.↗

Standardized Modular Power Interfaces for Future Space Explorations Missions

Earlier studies show that future human explorations missions are composed of multi-vehicle assemblies with interconnected electric power systems. Some vehicles are often intended to serve as flexible multi-purpose or multi-mission platforms. This drives the need for power architectures that can be reconfigured to support this level of flexibility. Power system developmental costs can be reduced, program wide, by utilizing a common set of modular building blocks. Further, there are mission operational and logistics cost benefits of using a common set of modular spares. These benefits are the goals of the Advanced Exploration Systems (AES) Modular Power System (AMPS) project. A common set of modular blocks requires a substantial level of standardization in terms of the Electrical, Data System, and Mechanical interfaces. The AMPS project is developing a set of proposed interface standards that will provide useful guidance for modular hardware developers but not needlessly constrain technology options, or limit future growth in capability. In 2015 the AMPS project focused on standardizing the interfaces between the elements of spacecraft power distribution and energy storage. The development of the modular power standard starts with establishing mission assumptions and ground rules to define design application space. The standards are defined in terms of AMPS objectives including Commonality, Reliability-Availability, Flexibility-Configurability and Supportability-Reusability. The proposed standards are aimed at assembly and sub-assembly level building blocks. AMPS plans to adopt existing standards for spacecraft command and data, software, network interfaces, and electrical power interfaces where applicable. Other standards including structural encapsulation, heat transfer, and fluid transfer, are governed by launch and spacecraft environments and bound by practical limitations of weight and volume. Developing these mechanical interface standards is more difficult but an essential part of defining physical building blocks of modular power. This presentation describes the AMPS projects progress towards standardized modular power interfaces.

Spacecraft Power↗

GAP analysis towards a design qualification standard development for grid-connected photovoltaic inverters.

A dedicated design qualification standard for PV inverters does not exist. Development of a well-accepted design qualification standard, specifically for PV inverters will significantly improve the reliability and performance of inverters. The existing standards for PV inverters such as ANSI/UL 1741 and IEC 62109-1 primarily focus on safety of PV inverters. The IEC 62093 discusses inverter qualification but it includes all the BOS components. There are other general standards for distributed generators including the IEEE 1547 series of standards which cover major concerns like utility integration but they are not dedicated to PV inverters and are not written from a design qualification point of view. In this paper some of the potential requirements for a design qualification standard for PV inverters are addressed. The missing links in existing PV inverter related standards are identified and with the IEC 62093 as a guideline, the possible inclusions in the framework for a dedicated design qualification standard of PV inverter are discussed. Some of the key missing links are related to electric stress tests. Hence, a method to adapt the existing surge withstand test standards for use in design qualification standard of PV inverter is presented.

14 SOLAR ENERGY↗

Diversification and Challenges of Software Engineering Standards

The author poses certain questions in this paper: 'In the future, should there be just one software engineering standards set? If so, how can we work towards that goal? What are the challenges of internationalizing standards?' Based on the author's personal view, the statement of his position is as follows: 'There should NOT be just one set of software engineering standards in the future. At the same time, there should NOT be the proliferation of standards, and the number of sets of standards should be kept to a minimum.It is important to understand the diversification of the areas which are spanned by the software engineering standards.' The author goes on to describe the diversification of processes, the diversification in the national and international character of standards organizations, the diversification of the professional organizations producing standards, the diversification of the types of businesses and industries, and the challenges of internationalizing standards.

software standards international standards softwar↗

Standardization of Laser Methods and Techniques for Vibration Measurements and Calibrations

The realization and dissemination of the SI units of motion quantities (vibration and shock) have been based on laser interferometer methods specified in international documentary standards. New and refined laser methods and techniques developed by national metrology institutes and by leading manufacturers in the past two decades have been swiftly specified as standard methods for inclusion into in the series ISO 16063 of international documentary standards. A survey of ISO Standards for the calibration of vibration and shock transducers demonstrates the extended ranges and improved accuracy (measurement uncertainty) of laser methods and techniques for vibration and shock measurements and calibrations. The first standard for the calibration of laser vibrometers by laser interferometry or by a reference accelerometer calibrated by laser interferometry (ISO 16063-41) is on the stage of a Draft International Standard (DIS) and may be issued by the end of 2010. The standard methods with refined techniques proved to achieve wider measurement ranges and smaller measurement uncertainties than that specified in the ISO Standards. The applicability of different standardized interferometer methods to vibrations at high frequencies was recently demonstrated up to 347 kHz (acceleration amplitudes up to 350 km/s{sup 2}). The relative deviations between the amplitude measurement results of the different interferometer methods that were applied simultaneously, differed by less than 1% in all cases.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

ANSI/ASHRAE/IESNA Standard 90.1-2007 Preliminary Qualitative Determination

A preliminary qualitative analysis of all addenda to American National Standards Institute (ANSI)/American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)/Illuminating Engineering Society of North America (IESNA) Standard 90.1-2004 that were included in ANSI/ASHRAE/IESNA Standard 90.1-2007 was conducted. All 44 addenda processed by ASHRAE in the creation of Standard 90.1-2007 from Standard 90.1-2004 were evaluated by the U.S. Department of Energy (DOE) for their impact on energy efficiency. DOE preliminarily determined whether that addenda would have a positive, neutral, or negative impact on overall building efficiency. Table S.1 shows the number of positive and negative changes for each section of Standard 90.1. The results of the textual analysis indicate that the majority of changes (30 of the total of 44 listed) were neutral. These include editorial changes, changes to reference standards, changes to alternative compliance paths, and other changes to the text of the standard that may improve the usability of the standard, but do not generally improve or degrade the energy efficiency of building. There were 11 changes that were evaluated as having a positive impact on energy efficiency and 2 changes that were evaluated as having a negative impact on energy efficiency.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Overview of North American Hydrogen Sensor Standards

An overview of the main North American codes and standards associated with hydrogen safety sensors is provided. The distinction between a code and a standard is defined, and the relationship between standards and codes is clarified, especially for those circumstances where a standard or a certification requirement is explicitly referenced within a code. The report identifies three main types of standards commonly applied to hydrogen sensors (interface and controls standards, shock and hazard standards, and performance-based standards). The certification process and a list and description of the main standards and model codes associated with the use of hydrogen safety sensors in hydrogen infrastructure are presented.

30 DIRECT ENERGY CONVERSION↗

Automation & Autonomy Standards and Guidelines for Space Vehicles

The NASA Office of the Chief Health and Medical Officer (OCHMO) requested HRP conduct a survey of industry and government standards and guidelines for the interaction of automation/autonomy with humans. Guidance for verification testing of human-automation designs was also requested. A rapid response was requested so that the deliverables could be provided as part of a future NASA solicitation for automated systems for HLS. The project began with a broad review and analysis of prior NASA work in this area, as well as external standards related to human interaction with automation/autonomy. The team reviewed approximately 200 documents, and interviewed multiple industry and government subject matter experts (SMEs). “Gold standard” documents were selected for focus and key categories were identified. A cross-walk of standards was created, and common standards and guidelines were selected and rephrased (where necessary) to be information-rich, concise, and usable. Verification guidelines and examples were also developed. The final report includes an introduction to automation and autonomy, selected standards and guidelines, verification method guidance, and research gaps. In addition to the report, the team delivered a list of candidate standards for autonomous vehicles, as well as a list of candidate standards for a future NASA-STD-3001 update on automation/autonomy. The presentation will describe the rapid response project approach and methods, examples of standards and guidelines identified and delivered to OCHMO, and research needed to develop additional automation/autonomy design guidance where gaps currently exist.

automation↗

Standard measures in Analogs of Spaceflight

Standard measures are defined as research measures (physiological, performance, or otherwise) that quantify the subject’s health and performance before, during, and after a spaceflight or a spaceflight analog mission. The Standard Measures Cross-Cutting Project (SMCCP) collects and analyzes standard measures that support assessment and quantification of health risks and efficacy of countermeasures and technologies required to prevent or mitigate adverse outcomes from exposure to the spaceflight environment. SMCCP uses the following spaceflight analogs: - Human Exploration Research Analog (HERA) in Houston, TX: 4-person isolation/confinement; nominal mission duration of 45 days; run by the Human Research Program (HRP). SMCCP uses weekly questionnaires to gather data on the crewmembers’ emotional and mental state and collects blood samples biweekly to measure crewmembers’ serum cortisol levels at the start, middle, and end of the mission. - Institute for Biomedical Problems (IBMP) Ground-Based Experimental Complex, called NEK, in Moscow, Russia: 6-person isolation/confinement; duration of 8 months; run by IBMP. Standard measures data collected during NEK are the same as for HERA above. - :envihab in Cologne, Germany: 12-person bed rest facility; closed environment; 30 to 60-day campaigns; run by the German Aerospace Center (DLR). For bedrest studies, SMCCP uses the international standard measures as documented in the International Academy of Astronautics publication titled Guidelines for Standardization of Bed Rest Studies in the Spaceflight Context (June 2014). These international standard measures evaluate potential changes in bone, muscle, cardiovascular, and visual systems, as well as changes in psychology and nutrition. The international standard measures complement those collected during studies by individual investigators and allow comparison of responses across different bed rest and countermeasures durations. In this presentation, we will review available SMCCP data collected during the recent isolation studies in HERA (C6) and NEK (SIRIUS-21), and during the SANS (SM1, SM2) bed rest studies in :envihab. These standard measures datasets are made available to concurrent investigators in the given mission or campaign via data sharing agreements and/or data sharing plans and to other investigators that have been granted retrospective access to the data (researchers with IRB approved protocols, risk custodians) to advance understanding of physiological and behavioral risks associated with these spaceflight analogs.

Standard Measures↗

History and Status of DOE’s Standardized Canister

[Poster] The U.S. Department of Energy (DOE) is responsible for managing spent nuclear fuel (SNF) currently in its possession, as well as SNF that will come into its possession in the future. DOE will rely upon the standardized canister to confine radionuclides and precluding the moderator in order to ensure safe, long-term management and disposition of SNF in its possession. This strategy helps minimize characterization costs (i.e., funds and exposure) and other technical challenges associated with the traditional approach of relying on fuel-specific properties to demonstrate compliance with the regulator. The use of the standardized canister offers the following benefits: • The standardized canister design is complete. It has been tested under a variety of drop and accident scenarios and was subsequently licensed under 10 CFR 72 as a storage system as part of the Foster Wheeler Environmental Corporation (FWENC) Facility. It is also part of the license submittal for Yucca Mountain. • There is high confidence that the standardized canister design can be stored within commercially-available storage casks and licensed as part of a transportation-system package. • A robust standardized canister simplifies accident analyses and does not rely on characterization of the contained waste. This simplifies safety analysis, provides a greater level of confidence with stakeholders and reduces cost and risk. • A common design for the associated packaging, closure, and loadout facilities results in significant savings. • The DOE standardized canister would simplify design efforts, procurement, and fabrication. • Standardizing handling activities and associated training, procedures, equipment, and tooling leads to enhanced safety and surety of operations. The standardized canister is the preferred package for these materials. It withstood scrutiny by the Yucca Mountain Repository License Application, the Nuclear Regulatory Commission’s (NRC) Advisory Committee on Nuclear Waste, the Nuclear Waste Technical Review Board, an American Society of Mechanical Engineers peer review, and the FWENC storage license application. This evaluation summarizes and documents the status of the design and rationale for the DOE standardized canister, and outlines remaining needs before deployment. In addition, it discusses the factors that have the potential to influence storage, transportation, and disposal of DOE SNF.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

New work on updating and extending the nuclear data standards

An International Atomic Energy Agency (IAEA) Data Development Project was initiated to provide a mechanism for allowing new experimental data and improvements in evaluation procedures to be incorporated into new evaluations of the standards. The work on this project is ongoing. In the past very long periods sometimes occurred between evaluations of the standards. Through the use of this Project, such long periods should not occur. Work on the cross section standards through this Project has included an update of the experimental data to be used in the cross section standards evaluations, a study of the uncertainties obtained in the international standards evaluation, and improvements in the smoothing procedure for capture cross sections. It was decided that this Project should have a broader range of activities than just the cross section standards and thus encompass standards related activities. The following are being investigated: improvements in the gold cross section at energies below where it is considered a standard and work on certain cross sections that are not as well known as the cross section standards but could be very useful as reference cross sections relative to which certain types of cross section measurements can be made. This work includes prompt gamma-ray production in fast neutron-induced reactions, and work on the {sup 252}Cf spontaneous fission neutron spectrum and the {sup 235}U thermal neutron fission spectrum. Most of the data investigated through this Project are used in dosimetry applications. (authors)

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Leakage Rate Testing Considerations and Implementation of ANSI N 14.5-2014 Standard within EnergySolutions Type (B) cask fleet - 18629

In March 2016, Nuclear Regulatory Commission (NRC) staff issued Information Notice 2016-04: 'ANSI N14.5-2014 Revision and leakage rate testing considerations'. American National Standards Institute (ANSI) N14.5, 'American National Standard for Radioactive Materials-Leakage Tests on Packages for Shipment', applies to leakage rate testing of Low Level Radioactive Waste (LLRW) Type B packages operated under 10CFR71. In their information notice NRC is encouraging Type B cask license holders and licensees (cask users) to adapt a new version of ANSI N 14.5 standard. Typically, leakage rate testing for Type B packages (or casks) is performed at different stages of cask development (design and fabrication leak tests) and operations (periodic/maintenance and pre-shipment leak tests) with the purpose to reasonably assure that the packaging will contain radioactive material under both normal and hypothetical accident conditions of transport described in 10CFR71. The standard was updated to provide a modern, robust and standardized approach for performance of leak rate testing on Type B casks by the industry stakeholders. Although implementation of new version of the leak testing standard may not be problematic for a modern Type B package designs, it may be extremely challenging to apply its principles to the existing legacy Type B casks which were designed/fabricated more then 20-30 years ago based on older requirements. Majority of such casks are not 'leak test' friendly. Some of legacy Type B packages may not readily available to meet newer ANSI N 14.5 standard requirements and will require implementation of alternative compensatory measures in lieu of the standard's requirements. In addition, the new standard mandates implementation of additional requirements for leak rate testing performance and personnel qualifications during routine maintenance of Type B casks by owner and during operations of casks by users. The focus of the paper will be to discuss ANSI N 14.5-2014 requirements and provide specific examples on how these requirements will impact the current leak rate test practices. This will be illustrated based on several Type B cask models operated within EnergySolutions fleet (both newer and legacy cask designs). Finally, the paper will cover considerations of the cask closure design features that have to be considered by Type B cask designers in order to ensure robustness of leak testing during design, fabrication and, most importantly, operation of a package. This information shall benefit both owners and users of Type B casks with respect to improvement of the cask designs and Type B cask operational experience. (author)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Development of a new IEC standard for HDL-programmed devices performing category B or C functions - 147

This paper presents an ongoing project within IEC (International Electrotechnical Commission) SC45A regarding the development of a new standard addressing the development of HDL (Hardware Description Language) -Programmable Devices (HPDs) carrying out category B or C functions. This paper initially presents the context and the approach that was adopted for the development of the initial proposal, presented at the IEC SC45A meeting in the Republic of South Korea in March 2016. The objective of this paper is to present the current state of progress of the new standard, which has now been allocated the project number IEC 62566-2. A number of key points and topics for discussion in the coming months are presented. It is hoped that the standard will be published in 2019, completing the body of normative requirements for all function categories and for all technological families currently addressed by the IEC SC45A set of standards. The final content of the standard will be based on a necessary compromise between the need to maintain coherence with the SC45A set of standards, in particular with requirements imported from IEC 62566 and IEC 62138, and the need to perfect requirements specific to class 2 and 3 HPD developments. A number of conclusions and recommendations are made, especially the need to encourage the use of HPDs when they are well suited to the target application, even if no standards currently exist. It is only through such experiences that relevant, industrially-applicable standards can be developed. In order to harmonize requirements between countries and increase the competitively of nuclear power, stakeholders should be encouraged to contribute to, and endorse standards where they are available. (authors)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Fostering Geothermal Machine Learning Success: Elevating Big Data Accessibility and Automated Data Standardization in the Geothermal Data Repository

The Department of Energy's (DOE's) Geothermal Data Repository (GDR) has implemented improvements to both its data lakes and its data standards and automated data pipelines. The GDR data lakes have reduced storage and compute-related barriers to using large geothermal datasets, enabling these large datasets to be accessed by anyone with a modern computer and internet access. More recently, the GDR has been working to further reduce barriers through streamlining the data intake process, educating users on the process and requirements, and helping users access data from the data lakes. These improvements have augmented the quantity of datasets the GDR is able to accept into its data lakes and have enabled users who are new to cloud tools to access these datasets more easily, overall increasing the accessibility of big geothermal data for use in machine learning and other projects. In addition, the GDR now has built-in data standards and pipelines for drilling data, geospatial data, and distributed acoustic sensing (DAS) data. These standardization efforts aim to enhance the real-world applicability of geothermal machine learning outcomes by improving the quality of training data. Specifically, through standardizing high-value datasets, the GDR is reducing project-specific data curation requirements, thus allowing more time for actual research. By automating this process, the burden of standardization is lifted from the user, ultimately increasing the availability of standardized data. This paper provides an update on recent improvements made to the GDR's data lakes and automated data pipelines, including: (1) streamlining the data lake intake process, (2) better educating users on the process and requirements through a new data lakes page, (3) adding data lake direct access links to GDR data lake submission pages, (4) implementing a DAS data pipeline to convert DAS data uploaded in SEG-Y format to a standardized hierarchical data format v5 (HDF5), (5) extending this pipeline to encompass data in the GDR data lake, (6) adding metadata requirements for geospatial data, (7) making user interface/user experience (UX) enhancements to the data pipelines' documentation pages, and (8) improving the GDR's data standards and pipelines pages to better guide users in ensuring that their data is standardized by the GDR's automated data pipelines. 2024 Geothermal Resources Council. All rights reserved.

accessibility↗

Progress and Goals for INMM ASC N15 Consensus Standard "Administrative Practices for the Determination and Reporting of Results of Non-Destructive Assay Measurements of Nuclear Material in Situ for Safeguards Nuclear Criticality Safety and Other Purposes"

This paper will discuss the goals and progress to date on the development of INMM Accredited Standard Committee (ASC) N15 consensus standard Administrative Practices for the Determination and Reporting of Results of Non-Destructive Assay Measurements of Nuclear Material in situ for Safeguards, Nuclear Criticality Safety, and Other Purposes. This standard will define administrative practices in the areas of data generation and reporting of NDA assay of holdup deposits with consideration of the stakeholders of the reported results. These stakeholders may include nuclear material accounting and safeguards, nuclear criticality safety, waste management, health physics, facility characterization, authorization basis, radiation safety, and site licensing authorities. Stakeholder input will be solicited from interested parties and incorporated during the development of the document. Currently only one consensus standard exists that explicitly deals with NDA holdup measurements: ASTM C1455 Standard Test Method for Nondestructive Assay of Special Nuclear Material Holdup Using Gamma-Ray Spectroscopic Methods. The ASTM International standard emphasizes the activities involved in actually making measurements and was developed by safeguards and NDA experts. This new INMM ASC N15 standard will complement the existing ASTM international standard. One of the largest driving factors for writing this new standard was the recent emphasis on in situ NDA measurements by the safeguards community due to the Defense Nuclear Facility Safety Board (DNFSB) recommendation 2007-1 on in situ NDA measurements. Specifically, DNFSB recommendation 2007-1 referenced the lack of programmatic requirements for accurate in situ measurements and the use of measurement results for compliance with safety-based requirements. That being the case, this paper will also discuss the progress made on the Implementation Plan for Defense Nuclear Facilities Safety Board Recommendation 2007-1 Safety-Related In Situ Nondestructive Assay of Radioactive Materials. Some of the information that will be presented includes observations made during site visits, how information useful to all facilities using nondestructive assay to determine holdup material quantities will be disseminated, and preliminary results of a gap analysis performed on current in situ nondestructive assay holdup measurements.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗