Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “spectral reflectance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
NASA NTRS2012

Comparisons of a Constrained Least Squares Model Versus Human-in-the-Loop for Spectral Unmixing to Determine Material Type of GEO Debris

Spectral reflectance data through the visible regime was collected at Las Campanas Observatory in Chile using an imaging spectrograph on one of the twin 6.5-m Magellan telescopes. The data were obtained on 1-2 May 2012 on the 'Landon Clay' telescope with the LDSS3 (Low Dispersion Survey Spectrograph 3). Five pieces of Geosynchronous Orbit (GEO) or near-GEO debris were identified and observed with an exposure time of 30 seconds on average. In addition, laboratory spectral reflectance data was collected using an Analytical Spectral Device (ASD) field spectrometer at California Polytechnic State University in San Luis Obispo on several typical common spacecraft materials including solar cells, circuit boards, various Kapton materials used for multi-layer insulation, and various paints. The remotely collected data and the laboratory-acquired data were then incorporated in a newly developed model that uses a constrained least squares method to unmix the spectrum in specific material components. The results of this model are compared to the previous method of a human-in-the-loop (considered here the traditional method) that identifies possible material components by varying the materials and percentages until a spectral match is obtained. The traditional model was found to match the remotely collected spectral data after it had been divided by the continuum to remove the space weathering effects, or a "reddening" of the materials. The constrained least-squares model also used the de-reddened spectra as inputs and the results were consistent with those obtained through the traditional method. For comparison, a first-order examination of including reddening effects into the constrained least-squares model will be explored and comparisons to the remotely collected data will be examined. The identification of each object's suspected material component will be discussed herein.

Rapp, Jason↗
NASA NTRS2013

Comparisons of a Constrained Least Squares Model versus Human-in-the-Loop for Spectral Unmixing to Determine Material Type of GEO Debris

Spectral reflectance data through the visible regime was collected at Las Campanas Observatory in Chile using an imaging spectrograph on one of the twin 6.5-m Magellan telescopes. The data were obtained on 1-2 May 2012 on the 'Landon Clay' telescope with the LDSS3 (Low Dispersion Survey Spectrograph 3). Five pieces of Geosynchronous Orbit (GEO) or near-GEO debris were identified and observed with an exposure time of 30 seconds on average. In addition, laboratory spectral reflectance data was collected using an Analytical Spectral Device (ASD) field spectrometer at California Polytechnic State University (Cal Poly) in San Luis Obispo on several typical common spacecraft materials including solar cells, circuit boards, various Kapton materials used for multi-layer insulation, and various paints. The remotely collected data and the laboratory-acquired data were then incorporated in a newly developed model that uses a constrained least squares method to unmix the spectrum in specific material components. The results of this model are compared to the previous method of a human-in-the-loop (considered here the traditional method) that identifies possible material components by varying the materials and percentages until a spectral match is obtained. The traditional model was found to match the remotely collected spectral data after it had been divided by the continuum to remove the space weathering effects, or a reddening of the materials. The constrained least-squares model also used the de-reddened spectra as inputs and the results were consistent with those obtained through the traditional method. For comparison, a first-order examination of including reddening effects into the constrained least-squares model will be explored and comparisons to the remotely collected data will be examined. The identification of each object s suspected material component will be discussed herein.

Abercromby, Kira J.↗
NASA NTRS1974

Orange glass - Evidence for regional deposits of pyroclastic origin on the moon

Crystallized spheres of orange glass from Shorty Crater at the Apollo 17 site are shown by spectral reflectance data to be the characteristic ingredient of the dark mantling deposit of the Taurus-Littrow region. This deposit, mapped on spectral vidicon images taken using earth-based telescopes, apparently is thickest 50 km northwest of the Apollo 17 landing area, and has a gradational contact with the surrounding materials. The irregular areal distribution of the dark-mantle deposit and the gradational borders support conclusions based on laboratory studies of the orange soils that these are volcanic pyroclastic materials. Similar deposits are identified by spectral reflectance properties near Rima Bode, Schroeter W, Fauth H, and Higinus W. The same material is likely to occur at Sulpucius Gallus based on visual and photographic observations of orange soil. The apparently restricted occurrence of the orange-glass deposits in a belt along the edges of major mare basins implies structural control of volcanic vents and a possible deep-seated origin.

Adams, J. B.↗
NASA NTRS2010

An Overview of the Landsat Data Continuity Mission

The advent of the Landsat Data Continuity Mission (LDCM), currently with a launch readiness date of December, 2012, will see evolutionary changes in the Landsat data products available from the U.S. Geological Survey (USGS) Earth Resources Observation and Science (EROS) Center. The USGS initiated a revolution in 2009 when EROS began distributing Landsat data products at no cost to requestors in contrast to the past practice of charging the cost of fulfilling a request; that is, charging $600 per Landsat scene. To implement this drastic change, EROS terminated data processing options for requestors and began to produce all data products using a consistent processing recipe. EROS plans to continue this practice for the LDCM and will required new algorithms to process data from the LDCM sensors. All previous Landsat satellites flew multispectral scanners to collect image data of the global land surface. Additionally, Landsats 4, 5, and 7 flew sensors that acquired imagery for both reflective spectral bands and a single thermal band. In contrast, the LDCM will carry two pushbroom sensors; the Operational Land Imager (OLI) for reflective spectral bands and the Thermal InfraRed Sensor (TIRS) for two thermal bands. EROS is developing the ground data processing system that will both calibrate and correct the data from the thousands of detectors employed by the pushbroom sensors and that will also combine the data from the two sensors to create a single data product with registered data for all of the OLI and TIRS bands.

Irons, James R.↗
NASA NTRS1990

Spectral bidirectional reflectance and effects on vegetation indices for a prairie grassland

Preliminary results of bidirectional reflectance data from two radiometric devices are presented and considered in the light of surface biophysical properties that affect surface radiometric parameters. The Portable Apparatus for Rapid Acquisition of Bidirectional Observations of the Land and Atmosphere and a high spectral continuous-wavelength spectroradiometer called the SE590 are employed to study hemispherical-conical reflectance factors. Examples of the resulting data sets are presented which show that the normalized-difference vegetation index and the Simple-Ratio vegetation index depend on the solar zenith and sensor-view zenith angles. Consideration is given to the importance of latitude, season, and time of day in interpreting the results of the indices since these factors can significantly affect the interpretive parameters.

Deering, D. W.↗
NASA NTRS1988

Arc-textured metal surfaces for high thermal emittance space radiators

Carbon arc electrical discharges struck across the surfaces of metals such as Nb-1 percent Zr, alter the morphology to produce a high thermal emittance surface. Metal from the surface and carbon from the arc electrode vaporize during arcing, and then condense on the metal surface to produce a microscopically rough surface having a high thermal emittance. Quantitative spectral reflectance measurements from 0.33 to 15 microns were made on metal surfaces which were carbon arc treated in an inert gas environment. The resulting spectral reflectance data were then used to calculate thermal emittance as a function of temperature for various methods of arc treatment. The results of arc treatment on various metals are presented for both ac and dc arcs. Surface characterization data, including thermal emittance as a function of temperature, scanning electron microscopy, and atomic oxygen durability, are also presented. The ac arc texturing was found to increase the thermal emittance at 800 K from 0.05 to 0.70.

Banks, Bruce A.↗
NASA NTRS1992

Identification of a far-red reflectance response to ectomycorrhizae in slash pine

Spectral reflectances were measured for the canopies of Pinus elliottii seedlings that were inoculated versus noninoculated with the ectomycorrhizal fungus Pisolithus tinctorius. Reflectances of the less vigorous, noninoculated seedlings increased substantially at visible and near-IR wavelengths compared to the more vigorous, inoculated seedlings. An algorithm was developed to indicate the spectral regions in which reflectance was most sensitive to ectomycorrhizae. The reflectance curve of the more vigorous seedlings was used as a standard of comparison. The spectral regions defined by this algorithm are denoted as regions of maximum reflectance sensitivity. Far-red and near-IR photography filtered to the region of maximum sensitivity (700 nm) were used to enable visualization of a 'blue shift' reflectance response to decreased vigor in the noninoculated seedlings in response to these differences of mycorrhizal development.

Cibula, W. G.↗
NASA NTRS1976

Detection and mapping of mineralized areas in the Cortez-Uinta Belt, Utah-Nevada, using computer-enhanced ERTS imagery

The author has identified the following significant results. Preliminary analysis indicates that mineralogical differences between altered rocks and most unaltered rocks in south-central Nevada cause visible and near infrared spectral reflectance differences, which can be used to discriminate these broad categories of rocks in multispectral images. The most important mineralogical differences are the increased abundance of goethite, hematite, and jarosite, and the presence of alunite, montmorillonite, and kaolinite in the altered rock. The technique to enhance subtle spectral differences combines ratioing of the MSS bands and contrast stretching. The stretched ratio values are used to produce black and white images that depict materials according to spectral reflectance; rationing minimizes the influence of topography and overall albedo on the grouping of spectrally similar materials. Field evaluation of color-ratio composite shows that, excluding alluvial areas, approximately 80 percent of the green and brown color patterns are related to hydrothermal alternation. The remaining 20 percent consists mainly of pink hematitic crystallized tuff, a result of vapor phase crystallization, and of tan and red ferruginous shale and siltstone.

Rowan, L. C.↗
NASA NTRS1981

Determination of growth stage from reflectance spectra of crops

The spectral reflectance characteristics of vegetation have been studied with the objective to learn how to extract useful information about the state of surface vegetation from space-borne observing systems, with emphasis on agricultural applications. Results of simulation studies based on high-resolution airborne spectrometer data indicate that changes in biomass, plant pigment, and leaf water content can be independently tracked by monitoring the reflective properties of vegetation with an appropriate selection of bands.

Ungar, S. G.↗
NASA NTRS1984

Collection of in situ forest canopy spectra using a helicopter - A discussion of methodology and preliminary results

An important part of fundamental remote sensing research is based on the measurement and analysis of spectral reflectance from earth surface materials in situ. It has been found that for an effective analysis of the target of interest, different applications of remotely sensed data require spectral measurements from different portions of the electromagnetic spectrum. It is pointed out that the detailed spectral reflectance characteristics of forest vegetation are currently not well understood, particularly in the middle infrared wavelength region. Details regarding the need for in situ forest canopy measurements are examined, taking into account certain difficulties arising in the case of satellite observations. Because of these difficulties, the present paper provides a discussion of methodology and preliminary spectra based on an experiment to use a helicopter as an observing platform for in situ forest canopy spectra measurement.

Williams, D. L.↗
NASA NTRS1992

Temperature-dependent reflectivity of silicon carbide

The spectral reflectivity of a commercial silicon carbide (SiC) ceramic surface was measured at wavelengths from 2.5 to 14.5 microns and at temperatures ranging from 358 to 520 K using a NASA-developed multiwavelength pyrometer. The SiC surface reflectivity was low at the short wavelengths, decreasing to almost zero at 10 microns, then increasing rapidly to a maximum at approximately 12.5 microns, and decreasing gradually thereafter. The reflectivity maximum increased in magnitude with increasing surface temperature. The wavelength and temperature dependence can be explained in terms of the classical dispersion theory of crystals and the Lorentz electron theory. Electronic transitions between the donor state and the conduction band states were responsible for the dispersion. The concentration of the donor state in SiC was determined to be approximately 4 x 10 exp 18 and its ionization energy was determined to be approximately 71 meV.

Ng, Daniel↗
NASA NTRS1973

Vitrification darkening of rock powders - Implications for optical properties of the lunar surface

Laboratory experiments show that albedoes as low as those on the moon can be produced by vacuum vitrification and associated chemical fractionation of ordinary terrestrial basaltic material. Vitrification is established as an unequivocal process that can account for the low albedo and apparent local darkening with age of the lunar surface. The spectral reflectance curves of glass powders are significantly different than those of the parent rock mineralogy; thus, the presence of ubiquitous glass in lunar surface material complicates compositional determinations by interpretation of spectral reflectance curves. Vitrification of rocks on the moon may highly modify the chemical composition of the resulting glass; thus, glass fragments found in lunar fines cannot be assumed to represent bulk parent rock material. Progressive impact vitrification of lunar surface material throughout the moon's history may have led to a fine-grain, opaque, refractory-rich material we call 'ultimate glass.' This unidentified and, at this point, hypothetical component may exist in dark regolith material; if found, it may be a useful indicator of regolith maturity.

Nash, D. B.↗
NASA NTRS1973

Photometric properties of Saturn's rings.

The spectral reflectivity of Saturn's rings between 0.36 and 1.06 microns is derived from observations of the combined light of the Saturn system and the previously determined spectrum of the disk of Saturn. The rings are red relative to the Sun for wavelengths below 0.7 micron; at longer wavelengths, the spectral reflectivity declines. The amplitude of the opposition effect (anomalous brightening at very small phase angles) shows a maximum at both ends of our spectral range.

Irvine, W. M.↗
NASA NTRS1973

In situ spectroradiometric quantification of ERTS data

The task of correlating in situ spectral reflectance measurements with ERTS imagery has commenced. A method of additive color analysis of a single multispectral band taken on different dates indicates that ERTS-1 bulk images have sufficient spatial and spectral fidelity to show indications of the presence of soil moisture in desert playas and changes in soil moisture with time. The chain of causality between soil moisture, in situ spectral reflectance, and ERTS multispectral scanner image density remains to be established during the subsequent phases of this study.

Yost, E.↗
NASA NTRS1992

Estimating net solar radiation using Landsat Thematic Mapper and digital elevation data

A radiative transfer algorithm is combined with digital elevation and satellite reflectance data to model spatial variability in net solar radiation at fine spatial resolution. The method is applied to the tall-grass prairie of the 16 x 16 sq km FIFE site (First ISLSCP Field Experiment) of the International Satellite Land Surface Climatology Project. Spectral reflectances as measured by the Landsat Thematic Mapper (TM) are corrected for atmospheric and topographic effects using field measurements and accurate 30-m digital elevation data in a detailed model of atmosphere-surface interaction. The spectral reflectances are then integrated to produce estimates of surface albedo in the range 0.3-3.0 microns. This map of albedo is used in an atmospheric and topographic radiative transfer model to produce a map of net solar radiation. A map of apparent net solar radiation is also derived using only the TM reflectance data, uncorrected for topography, and the average field-measured downwelling solar irradiance. Comparison with field measurements at 10 sites on the prairie shows that the topographically derived radiation map accurately captures the spatial variability in net solar radiation, but the apparent map does not.

Dubayah, R.↗
NASA NTRS2001

Treatment and Analysis of a Paint Chip from "Water Lilies": A Fire Damaged Monet

A museum fire in 1958 severely damaged a Monet 'Water Lilies' (1916-1926) painting that was on display. The surface of the painting is very dark with areas of blistering and charring. Over the years, traditional techniques have been found to be ineffective at removal of the soot and char from the surface. The painting, which is now in the care of the New York University (NYU) Conservation Center of the Institute of Fine Arts, was the subject of a study to determine if atomic oxygen treatment could remove the soot and char without damaging the fragile painting underneath. For test purposes, a small chip of paint was removed from the edge of the painting by a conservator at NYU and supplied to NASA Glenn Research Center for atomic oxygen treatment and analysis. The diffuse spectral reflectance, at three locations on the paint chip, was monitored at intervals during the atomic oxygen treatment process. Photo documentation of the chip during treatment was also performed. The color contrast was calculated from the spectral reflectance data as a function of treatment duration. Results of the testing indicated that the contrast improved as a result of the treatment, and the differentiation of colors on the surface was significantly improved. Soot and char could be removed without visibly affecting the gross surface features such as impasto areas. These results indicate the feasibility for the treatment of the 'Water Lilies' painting.

Miller, Sharon K. R.↗