Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solid solution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Discovery of the (In{sub 2}S{sub 3}){sub x}(MnIn{sub 2}S{sub 4}){sub 1-x} solid solutions and fabrication of photosensitive structures based on them

A technology of growing single crystals of (In{sub 2}S{sub 3}){sub x}(MnIn{sub 2}S{sub 4}){sub 1-x} solid solutions that provides control over their atomic composition in the entire concentration range 0 {<=} x {<=} 1 is developed. It is shown that, in the range x = 0-1, the single crystals have the cubic spinel structure and the unit cell parameter a follows the linear dependence on x. The exponential character of the temperature dependence of resistivity of solid solutions, on which the first photosensitive Cu/(In{sub 2}S{sub 3})x(MnIn{sub 2}S{sub 4}){sub 1-x} structures are obtained, is revealed. The first photosensitivity spectra of these structures are obtained, and, based on these spectra, dependences of energy of the direct and indirect band-to-band transitions on the composition x are determined. The possibility of applying these structures in broad-band photoconverters of optical radiation is concluded.

36 MATERIALS SCIENCE↗

Investigation into the growth and structure of thin-film solid solutions of iron-based superconductors in the FeSe{sub 0.92}-FeSe{sub 0.5}Te{sub 0.5} system

Thin films of FeSe{sub 0.92} and FeSe{sub 0.5}Te{sub 0.5} iron chalcogenide superconductors and solid solutions containing these components in different ratios have been grown on the surface of LaAlO{sub 3} (10<##> } } 1 }&#x00AF;<!-- ?? --> $ /bar 1 $ 1-bar </##>2) crystals by pulsed laser deposition. Films of solid solutions have been deposited by simultaneous laser ablation from two targets of the FeSe{sub 0.92} and FeSe{sub 0.5}Te{sub 0.5} stoichiometric compositions onto one substrate. An X-ray diffraction study of the film structure shows that the films grown are epitaxial and their lattice parameters regularly vary with the ratio of the deposited components, which was controllably varied by changing the ablation intensities from the targets.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Nanostructured rocksalt-type solid solution series (Ge{sub 1−x}Sn{sub x}Te){sub n}Sb{sub 2}Te{sub 3} (n=4, 7, 12; 0≤x≤1): Thermal behavior and thermoelectric properties

Solid solutions (Ge{sub 1−x}Sn{sub x}Te){sub n}Sb{sub 2}Te{sub 3} (n=4, 7, 12; 0≤x≤1) represent stable high-temperature phases and can be obtained as metastable compounds by quenching. High-resolution transmission electron microscopy reveals that the quenched (pseudo-)cubic materials exhibit parquet-like nanostructures comparable to, but especially for n=4 more pronounced than in (GeTe){sub n}Sb{sub 2}Te{sub 3} (GST materials). The temperature-dependent phase transitions are comparable; however, substitution with Sn significantly lowers the transition temperatures between cubic high-temperature phase and the long range ordered layered phases that are stable at ambient conditions. In addition, the metrics of the quenched Sn-containing materials remains closer to cubic, especially for samples with n=7 or 12. For samples with high defect concentrations (n=4, 7), Sn-substituted samples exhibit electrical conductivities up to 3 times higher than those of corresponding GST materials. Since the difference in thermal conductivity is much less pronounced, this results in a doubling of the thermoelectric figure of merit (ZT) at high temperatures for (Ge{sub 0.5}Sn{sub 0.5}Te){sub 4}Sb{sub 2}Te{sub 3} as compared to (GeTe){sub 4}Sb{sub 2}Te{sub 3}. Sn doping in (GeTe){sub 7}Sb{sub 2}Te{sub 3} increases the ZT value by a factor of up to 4 which is also due to an increased Seebeck coefficient. - Graphical abstract: High-resolution transmission electron micrographs of (GeTe){sub 4}Sb{sub 2}Te{sub 3} (top) and (Ge{sub 0.5}Sn{sub 0.5}Te){sub 4}Sb{sub 2}Te{sub 3} (bottom) with different nanostructures and thermoelectric figures of merit (ZT) of these samples. - Highlights: • Representative samples of solid solutions of (Ge{sub 1−x}Sn{sub x}Te){sub n}Sb{sub 2}Te{sub 3} were synthesized. • Sn substitution leads to more pronounced nanostructures in defect-rich compounds. • Phase transitions are comparable to (GeTe){sub n}Sb{sub 2}Te{sub 3} but occur at lower temperatures. • Sn substitution tends to increase electrical conductivity and Seebeck coefficient. • ZT of (GeTe){sub 7}Sb{sub 2}Te{sub 3} increases from 0.2 to 0.7 (at 400 °C) upon Sn substitution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Graph neural networks predict energetic and mechanical properties for models of solid solution metal alloy phases

Here, we developed a PyTorch-based architecture called HydraGNN that implements graph convolutional neural networks (GCNNs) to predict the formation energy and the bulk modulus for models of solid solution alloys for various atomic crystal structures and relaxed volumes. We trained the GCNN surrogate model on a dataset for nickel–niobium (NiNb) generated by the embedded atom model (EAM) empirical interatomic potential for demonstration purposes. The dataset was generated by calculating the formation energy and the bulk modulus as a prototypical elastic property for optimized geometries starting from initial body-centered cubic (BCC), face-centered cubic (FCC), and hexagonal compact packed (HCP) crystal structures, with configurations spanning the possible compositional range for each of the three types of initial crystal structures. Numerical results show that the GCNN model effectively predicts both the formation energy and the bulk modulus as function of the optimized crystal structure, relaxed volume, and configurational entropy of the model structures for solid solution alloys.

36 MATERIALS SCIENCE↗

Crystal structure, Raman spectra, infrared spectra and microwave dielectric properties of Li2Mg3Ti1-X(Mg1/3Ta2/3)XO6 (0 ≤ x ≤ 0.2) solid solution ceramics

Highlights: • Microwave properties of ε{sub r} = 14.70, Q·f = 200,600 GHz and τ{sub f} = −11.83 ppm/°C were obtained. • A small amount of (Mg{sub 1/3}Ta{sub 2/3}){sup 4+} can obviously improve properties. • Rietveld refinement and spectra were used to analyze properties. • Relationships between intrinsic parameters and properties were established. - Abstract: Li{sub 2}Mg{sub 3}Ti{sub 1-X}(Mg{sub 1/3}Ta{sub 2/3}){sub X}O{sub 6} (x = 0.00, 0.05, 0.10, 0.15, 0.20) solid solution ceramics were prepared by the conventional solid-state reaction method. Rietveld refinements, Raman spectra, infrared spectra, polarizability and bond energy were used to research the changes of microwave dielectric properties of these solid solutions. With the increase of x values from 0 to 0.2, dielectric constants (ε{sub r}) gradually increased, which could be explained by the variations of the polarizability, infrared resonant modes and Raman vibration modes. The variations of the quality factor (Q·f) could be explained by the changes of the bond valences. The temperature coefficient of resonant frequency (τ{sub ƒ}) correlated with the bond energy of TiO bonds. A small quantity of (Mg{sub 1/3}Ta{sub 2/3}){sup 4+} can obviously improve the microwave dielectric properties. Excellent microwave dielectric properties of ε{sub r} = 14.70, Q·f = 200,600 GHz and τ{sub f} = −11.83 ppm/°C were obtained for Li{sub 2}Mg{sub 3}Ti{sub 0.95}(Mg{sub 1/3}Ta{sub 2/3}){sub 0.05}O{sub 6} ceramic sintered at 1550 °C.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Solar hydrogen production using Ce{sub 1-x}Li{sub x}O{sub 2-{delta}} solid solutions via a thermochemical, two-step water-splitting cycle

The reactivity of Ce{sub 1-x}Li{sub x}O{sub 2-{delta}} (x=0.025, 0.05, 0.075 and 0.1) solid solutions during the redox and two-step water-splitting cycles has been investigated in this work. Thermogravimetric analysis (TGA), X-ray diffraction (XRD) patterns and field-emission scanning electron microscopy (FE-SEM) indicate that there are two reaction mechanisms in the O{sub 2}-releasing step and the shift in the reaction mechanisms occurs in the O{sub 2}-releasing step because of sintering at high temperatures, and a decrease in the concentration of lattice oxygen occurs as the O{sub 2}-releasing step proceeds. The reaction in the O{sub 2}-releasing step follows a second-order mechanism over a temperature range of 1000-1170 Degree-Sign C and a contracting-area model over a temperature range of 1170-1500 Degree-Sign C. According to direct gas mass spectroscopy (DGMS), ceria doped at 5 mol% Li exhibits the highest reactivity in the O{sub 2}-releasing step during both redox cycles in air and two-step water-splitting cycles, whereas ceria doped at 2.5 mol% Li yields the highest amount of hydrogen (4.79 ml/g) in the H{sub 2}-generation step during the two-step water-splitting cycles, which is higher than ceria doped with other metals. DGMS and electrochemical impedance spectroscopy (EIS) suggest that the average reaction rate in the H{sub 2}-generation step is influenced by the concentration of extrinsic oxygen vacancies, and thus, the reactivity in the H{sub 2}-generation step, to some degree, could be tuned by varying the concentration of extrinsic oxygen vacancies (Li content). - Graphical abstract: Average reduction fraction of Ce{sub 1-x}Li{sub x}O{sub 2-{delta}} (x=0.025, 0.05, 0.075 and 0.10) solid solutions versus Li content in the O{sub 2}-releasing step during the redox cycles in air and the two-step water-splitting cycles. Highlights: Black-Right-Pointing-Pointer We have investigated Li-doped ceria for hydrogen production using two-step water-splitting cycles. Black-Right-Pointing-Pointer The sintering effect on the reaction mechanisms was first clarified. Black-Right-Pointing-Pointer The shift of reaction mechanisms occurs during the O{sub 2}-releasing step. Black-Right-Pointing-Pointer The reaction-mechanism shift occurs because of sintering at high temperatures. Black-Right-Pointing-Pointer Doping at 2.5 mol% Li results in the highest H{sub 2} yield and cyclability for hydrogen production.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tuning of Photoluminescence by Cation Nanosegregation in the (CaMg) x (NaSc) 1– x Si 2 O 6 Solid Solution

Controlled photoluminescence tuning is important for the optimization and modification of phosphor materials. Herein we report an isostructural solid solution of (CaMg) x (NaSc) 1-x Si 2 O 6 (0 < x < 1) in which cation nanosegregation leads to the presence of two dilute Eu 2+ centers. The distinct nanodomains of isostructural (CaMg)Si 2 O 6 and (NaSc)Si 2 O 6 contain a proportional number of Eu 2+ ions with unique, independent spectroscopic signatures. Density functional theory calculations provided a theoretical understanding of the nanosegregation and indicated that the homogeneous solid solution is energetically unstable. It is shown that nanosegregation allows predictive control of color rendering and therefore provides a new method of phosphor development.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Unlocking iron metal as a cathode for sustainable Li-ion batteries by an anion solid solution

Traditional cathode chemistry of Li-ion batteries relies on the transport of Li-ions within the solid structures, with the transition metal ions and anions acting as the static components. Here, we demonstrate that a solid solution of F – and PO 4 3– facilitates the reversible conversion of a fine mixture of iron powder, LiF, and Li 3 PO 4 into iron salts. Notably, in its fully lithiated state, we use commercial iron metal powder in this cathode, departing from electrodes that begin with iron salts, such as FeF 3 . Our results show that Fe-cations and anions of F – and PO 4 3– act as charge carriers in addition to Li-ions during the conversion from iron metal to a solid solution of iron salts. This composite electrode delivers a reversible capacity of up to 368 mAh/g and a specific energy of 940 Wh/kg. Our study underscores the potential of amorphous composites comprising lithium salts as high-energy battery electrodes.

25 ENERGY STORAGE↗

Structure–transport correlations in Na 11 Sn 2 SbSe 12 and its sulfide solid solutions

We report a new ion conductor—Na 11 Sn 2 SbSe 12 —as a possible candidate for a solid catholyte in composite cathodes for all-solid state Na-batteries, which exhibits a room temperature ionic conductivity of 0.15 ± 0.03 mS cm −1 and an activation energy of 0.39 ± 0.02 eV. The sulfide solid solutions of Na 11 Sn 2 SbSe 12 , namely, Na 11 Sn 2 SbS 12−x Se x (x = 1 and 6), were also investigated through a combination of Rietveld refinement against powder x-ray diffraction data and electrochemical impedance spectroscopy to reveal the complex structure–property relationships governing ion transport in this class of materials. Meanwhile, broadening of the Na-ion diffusion pathways in Na 11 Sn 2 SbSe 12 is expected to facilitate Na-ion transport compared to the sulfide-rich member of the solid solution, the opposite holds: increasing the Se fraction in Na 11 Sn 2 SbS 12−x Se x leads to a little change in the activation energy but a reduction in the ionic conductivity. We ascribe this to the lowering of the prefactor, σ 0 , in the Arrhenius relationship with increasing lattice “softening” as a function of higher Se content.

Ramos, Erika P.↗

Local structure in solid solutions of stabilised zirconia with actinide dioxides (UO{sub 2}, NpO{sub 2})

The local structure of (Zr,Lu,U)O{sub 2-x} and (Zr,Y,Np)O{sub 2-x} solid solutions has been investigated by extended X-ray absorption fine structure (EXAFS). Samples were prepared by mixing reactive (Zr,Lu)O{sub 2-x} and (Zr,Y)O{sub 2-x} precursor materials with the actinide oxide powders, respectively. Sintering at 1600 {sup o}C in Ar/H{sub 2} yields a fluorite structure with U(IV) and Np(IV). As typical for stabilised zirconia the metal-oxygen and metal-metal distances are characteristic for the different metal ions. The bond lengths increase with actinide concentration, whereas highest adaptation to the bulk stabilised zirconia structure was observed for U---O and Np---O bonds. The Zr---O bond shows only a slight increase from 2.14 A at 6 mol% actinide to 2.18 A at infinite dilution in UO{sub 2} and NpO{sub 2}. The short interatomic distance between Zr and the surrounding oxygen and metal atoms indicate a low relaxation of Zr with respect to the bulk structure, i.e. a strong Pauling behaviour. -- Graphical abstract: Metal-oxygen bond distances in (Zr,Lu,U)O{sub 2-x} solid solutions with different oxygen vacancy concentrations (Lu/Zr=1 and Lu/Zr=0.5). Display Omitted Research Highlights: {yields} EXAFS indicates high U and Np adaption to the bulk structure of stabilised zirconia. {yields} Zr---O bond length is 2.18 A at infinite Zr dilution in UO{sub 2} and NpO{sub 2}. {yields} Low relaxation (strong Pauling behaviour) of Zr explains its low solubility in UO{sub 2}.

36 MATERIALS SCIENCE↗

Influence of cation species on thermal expansion of Y 2 Si 2 O 7 –Gd 2 Si 2 O 7 solid solutions

Mixtures of Y 2 Si 2 O 7 and Gd 2 Si 2 O 7 were synthesized by solid-state reaction at 1600°C and characterized via in situ x-ray diffraction (XRD) to determine their coefficients of thermal expansion (CTE). All solid solutions within the system exhibited the orthorhombic δ-RE 2 Si 2 O 7 (Pna2 1 ) structure. Thermal expansion measurements of Y 2 Si 2 O 7 and Gd 2 Si 2 O 7 correlated well with reported values in literature, and all synthesized solid solutions exhibited CTEs between Y 2 Si 2 O 7 and Gd 2 Si 2 O 7 . Generally, there was a slight decrease in CTE exhibited by the materials with increasing Gd 2 Si 2 O 7 content, with Gd 2 Si 2 O 7 having the lowest CTEs and Y 2 Si 2 O 7 the highest CTEs. Here, the decrease in CTE was attributed to stronger bonds of Gd-O over Y-O, as determined by calculated crystal orbital Hamilton populations using density functional theory. However, such differences were very small and crystal structure was the dominating factor in CTE trends.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Energy spectrum of charge carriers in TlIn{sub 1–x}Yb{sub x}Te{sub 2} solid solutions

The temperature dependences of the electrical conductivity σ(T), the Hall coefficient R(T), and the thermoelectric coefficient α(T) are investigated in TlIn{sub 1–x}Yb{sub x}Te{sub 2} (0 < x < 0.10) solid solutions at 80–1000K. From the kinetic parameters, the effective masses of electrons and holes are determined. The obtained experimental data on σ(T) and α(T) are interpreted within the context of a model with one and two types of charge carriers. It is established that, since x = 0.05, the TlIn{sub 1–x}Yb{sub x}Te{sub 2} solid solutions belong to the class of narrow-gap semiconductors that have high matrix elements of interaction.

36 MATERIALS SCIENCE↗

Synthesis of {beta}-phase Ag{sub 1-x}Cu{sub x}I (x = 0-0.5) solid solutions nanocrystals

Research highlights: {yields} Wet-chemical-chelating reaction processing has been used to synthesized A series of single {beta}-phase nano-Ag{sub 1-x}Cu{sub x}I (x = 0-0.5) solid solutions powders. {yields} Citric acid as complexing agent takes part in the process of chemical reaction and the chemical reactions can be described in this paper. {yields} The lattice parameters have been ascertained by the results of XRD. {yields} Crystalline sizes, which decrease with copper iodide concentration increasing, have been demonstrated by XRD and TEM. -- Abstract: A series of single {beta}-phase nano-Ag{sub 1-x}Cu{sub x}I (x = 0-0.5) solid solutions powders were synthesized by wet-chemical-chelating reaction processing and citric acid used as complexing agent. The Ag{sub 1-x}Cu{sub x}I powders were determined by X-ray diffraction and transmission electron microscopy. It was demonstrated that the crystalline size and lattice parameter of the Ag{sub 1-x}Cu{sub x}I powders decrease with an increase in the amount of CuI substitution. The copper in the lattice of the Ag{sub 1-x}Cu{sub x}I can effectively prevent the crystalline growth of the Ag{sub 1-x}Cu{sub x}I powders and citrate used in the Ag{sub 1-x}Cu{sub x}I powders synthesized process can accelerate single {beta}-phase crystalline structure formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Iron site occupancies in magnetite-ulvospinel solid solution: A new approach using XMCD

Ordering of Fe{sup 3+} and Fe{sup 2+} between octahedral (Oh) and tetrahedral (Td) sites in synthetic members of the magnetite (Fe{sub 3}O{sub 4}) - ulvoespinel (Fe{sub 2}TiO{sub 4}) solid-solution series was determined using Fe L{sub 2,3}-edge X-ray magnetic circular dichroism (XMCD) coupled with electron microprobe and chemical analysis, Ti L-edge spectroscopy, Fe K-edge EXAFS and XANES, Fe{sub 57} Moessbauer spectroscopy, and unit cell parameters. Microprobe analysis, cell edges and chemical FeO determinations showed that the bulk compositions of the samples were stoichiometric magnetite-ulvoespinel solid-solutions. Surface sensitive XMCD showed that the surfaces of these oxide minerals were more sensitive to redox conditions and some samples required re-equilibration with suitable solid-solid buffers. Detailed site-occupancy analysis of these samples gave XMCD-Fe{sup 2+}/Fe{sup 3+} ratios very close to stoichiometric values. L{sub 2,3}-edge spectroscopy showed that Ti{sup 4+} was restricted to Oh sites. XMCD results showed that significant Fe{sup 2+} only entered Td when the Ti content was > 0.40 apfu while Fe{sup 2+} in Oh increased from 1 a.p.f.u in magnetite to a maximum of {approx}1.4 apfu in USP45. As the Ti content increased from this point, the steady increase in Fe{sup 2+} in Td sites was clearly observable in the XMCD spectra, concurrent with a slow decrease in Fe{sup 2+} in Oh sites. Calculated magnetic moments showed a steady decrease from magnetite (4.06 {mu}{sub B}) to USP45 (1.5 {mu}{sub B}) and then a slower decrease towards the value for ulvoespinel (0 {mu}{sub B}). Two of the synthesized samples were also partially maghemitized by re-equilibrating with an oxidizing Ni-NiO buffer and XMCD showed that Fe{sup 2+} oxidation only occurred at Oh sites, with concomitant vacancy formation restricted to this site. This study shows the advantage of using XMCD as a direct measurement of Fe oxidation state in these complex magnetic spinels. These results can be used to rationalize the magnetic properties of titanomagnetites, and their oxidized titanomaghemitized analogues, in Earth's crustal rocks.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis and Characterization of Single Phase Metal Dodecaboride Solid Solutions: Zr 1-x Y x B 12 and Zr 1-x U x B 12

Single-phase metal dodecaboride solid solutions, Zr 0.5 Y 0.5 B 12 and Zr 0.5 U 0.5 B 12 , were arranged by arc melting from pure elements. The phase purity and composition were established by powder X-ray diffraction (PXRD), energy-dispersive X-ray spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), and 10 B and 11 B solid-state nuclear magnetic resonance (NMR) spectroscopy. The effects of carbon addition to Zr 1-x Y x B 12 were studied and it was found that carbon causes fast cooling and as a result rapid nucleation of grains, as well as “templating” and patterning effects of the surface morphology. The hardness of the Zr 0.5 Y 0.5 B 12 phase is 47.6 ± 1.7 GPa at 0.49 N load, which is ~17% higher than that of its parent compounds, ZrB 12 and YB 12 , with hardness values of 41.6 ± 2.6 and 37.5 ± 4.3 GPa, respectively. The hardness of Zr 0.5 U 0.5 B 12 is ~54% higher than that of its UB 12 parent. The dodecaborides were confirmed to be metallic by band structure calculations, diffuse reflectance UV–vis, and solid-state NMR spectroscopies. The nature of the dodecaboride colors—violet for ZrB 12 and blue for YB 12 —can be applied to charge-transfer. XPS indicates that the metals are in the following oxidation states: Y 3+ , Zr 4+ , and U$^{{5+}/^{6+}}$. The superconducting transition temperatures (T c ) of the dodecaborides were determined to be 4.5 and 6.0 K for YB 12 and ZrB 12 , respectively, as shown by resistivity and superconducting quantum interference device (SQUID) measurements. The T c of the Zr 0.5 Y 0.5 B 12 solid solution was suppressed to 2.5 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Growth of InAs{sub x}Sb{sub 1 –x} Solid Solutions on Misoriented GaAs(001) Substrates by Molecular-Beam Epitaxy

The effect of a substrate misorientation degree from a singular face on the composition and morphology of layers of InAs{sub x}Sb{sub 1 –x} solid solutions obtained by molecular-beam epitaxy on a GaAs surface has been investigated. The substrates of GaAs wafers with the orientation (100) misoriented in the direction [110] by 0°, 1°, 2°, and 5° are used. The heterostructures are grown at temperatures of 310°C and 380°C (respectively, the lower and upper boundaries of the temperature range in which structurally perfect InAs{sub x}Sb{sub 1 –x} films form). The effect of the molecular form of arsenic (As{sub 2} or As{sub 4}) on the composition of the layers is studied. The composition and structural properties are investigated using high-resolution X-ray diffractometry (HRXRD) and atomic-force microscopy (AFM). It is established that, in the series of misorientation angles 0° → 5°, the arsenic fraction x increases consecutively when using fluxes of both As{sub 2} and As{sub 4} molecules. With the As{sub 2} molecular flux, the fraction x increases only a little (1.05 times) with increasing degree of misorientation, while, when using the As{sub 4} flux, the increase in x is 1.75 times. An increase in the growth temperature leads to growth in the arsenic fraction in the solid solution. The surface morphology improves with an increasing degree of misorientation at a low growth temperature and degrades at a high temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A Neural Network Approach to Predict Gibbs Free Energy of Ternary Solid Solutions

Here, we present a data-centric deep learning (DL) approach using neural networks (NNs) to predict the thermodynamics of ternary solid solutions. We explore how NNs can be trained with a dataset of Gibbs free energies computed from a CALPHAD database to predict ternary systems as a function of composition and temperature. We have chosen the energetics of the FCC solid solution phase in 226 binaries consisting of 23 elements at 11 different temperatures to demonstrate the feasibility. The number of binary data points included in the present study is 102,000. We select six ternaries to augment the binary dataset to investigate their influence on the NN prediction accuracy. We examine the sensitivity of data sampling on the prediction accuracy of NNs over selected ternary systems. It is anticipated that the current DL workflow can be further elevated by integrating advanced descriptors beyond the elemental composition and more curated training datasets to improve prediction accuracy and applicability.

42 ENGINEERING↗

Ab initio investigation of Ti{sub 2}Al(C,N) solid solutions

M{sub n+1}AX{sub n} phases (M: early transition metal, A: IIIA- or IVA-group element, X: carbon or nitrogen) are layered ternary compounds that possess both metal- and ceramic-like properties with numerous potential applications in bulk and thin film forms, particularly under high-temperature conditions. In this work, we use the cluster expansion formalism to investigate the energetics of C-N interactions across the entire Ti{sub 2}AlC-Ti{sub 2}AlN composition range. It is shown that there is a definite tendency for ordering in the C,N sublattice. However, the molar volume and bulk modulus of the ordered structures found along the Ti{sub 2}AlC-Ti{sub 2}AlN composition range show small deviations from the (linear) rule of mixing, indicating that despite the ordering tendencies, the C-N interactions are not strong and the solution becomes disordered at relatively low temperatures. Random solid solutions of Ti{sub 2}AlC{sub 1-x}N{sub x} are simulated using special quasirandom structures (SQS) with x=0.25, 0.50, and 0.75. The thermodynamic properties of these structures are compared to those of the structures found to belong to the ground state through the cluster expansion approach. It is found that the structural properties of these approximations to random alloys do not deviate significantly from Vegard's law. The trend in the structural parameters of these SQS are found to agree well with available experimental data and the predictions of the bulk modulus suggest a very weak alloying effect--with respect to Vegard's law--on the elastic properties of Ti{sub 2}AlC{sub 1-x}N{sub x}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗