Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “remote imagery”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Development of analysis techniques for remote sensing of vegetation resources

Various data handling and analysis techniques are summarized for evaluation of ERTS-A and supporting high flight imagery. These evaluations are concerned with remote sensors applied to wildland and agricultural vegetation resource inventory problems. Monitoring California's annual grassland, automatic texture analysis, agricultural ground data collection techniques, and spectral measurements are included.

Draeger, W. C.↗

Image interpretation for a multilevel land use classification system

The potential use is discussed of three remote sensors for developing a four level land use classification system. Three types of imagery for photointerpretation are presented: ERTS-1 satellite imagery, high altitude photography, and medium altitude photography. Suggestions are given as to which remote sensors and imagery scales may be most effectively employed to provide data on specific types of land use.

Source record↗

Hydrographic charting from LANDSAT Satellite: A comparison with aircraft imagery

The relative capabilities of two remote-sensing systems in measuring depth and, consequently, bottom contours in sandy-bottomed and sediment-laden coastal waters were determined quantitatively. The multispectral scanner (MSS), orbited on the LANDSAT-2 Satellite, and the ocean color scanner (OCS), flown on U-2 aircraft, were used. Analysis of imagery taken simultaneously indicates a potential for hydrographic charting of marine coastal and shallow shelf areas, even when water turbidity is a factor. Several of the eight optical channels examined on the OCS were found to be sensitive to depth or depth-related information. The greatest sensitivity was in OCS-4(0.544 + or - 0.012 microns) from which contours corresponding to depths up to 12m were determined. The sharpness of these contours and their spatial stability through time suggests that upwelling radiance is a measure of bottom reflectance and not of water turbidity. The two visible channels on LANDSAT's MSS were less sensitive in the discrimination of contours, with depths up to 8m in the high-gain mode (3x) determined in MSS-4(0.5 to 0.6 microns).

Middleton, E. M.↗

Hydrographic charting from Landsat satellite - A comparison with aircraft imagery

The relative capabilities of two remote-sensing systems in measuring depth and, consequently, bottom contours in sandy-bottomed and sediment-laden coastal waters were determined quantitatively. The Multispectral Scanner (MSS), orbited on the Landsat-2 satellite, and the Ocean Color Scanner (OCS), flown on U-2 aircraft, were used for this evaluation. Analysis of imagery taken simultaneously indicates a potential for hydrographic charting of marine coastal and shallow shelf areas, even when water turbidity is a factor. Several of the eight optical channels examined on the OCS were found to be sensitive to depth or depth-related information. The greatest sensitivity was in OCS-4 (0.544 plus or minus 0.012 micron) from which contours corresponding to depths up to 12 m were determined. The sharpness of these contours and their spatial stability through time suggests that upwelling radiance is a measure of bottom reflectance and not of water turbidity. The two visible channels on Landsat's MSS were less sensitive in the discrimination of contours, with depths up to 8 m in the high-gain mode (3 X) determined in MSS-4 (0.5 to 0.6 micron).

Middleton, E. M.↗

Hydrologic interpretations based on infrared imagery of Long Island, New York

Six remote-sensing flights over Long Island's north and south shores were made during the period July 13, 1967, to February 25, 1970. Infrared imagery in the 8- to 14-micrometer range was obtained; results varied from poor to excellent in quality. The ability of the RS 7 and Reconofax 4 imagers to discern thermal contrasts of as little as 1 to 2 C (Celsius) permitted identification of areas of heavy ground-water discharge. These areas were concentrated primarily along the eroded headlands of the north shore and in the lower reaches of watercourses draining into Great South Bay. Only a few highly localized examples of direct ground-water discharge into the embayments along Long Island's south shore were detected in the imagery. Thermal loading emanating from a powerplant near Oceanside is shown to be quickly dissipated in Middle Bay. Optimal time for the collection of infrared imagery for hydrologic studies on Long Island is in summer and in winter, when surface-water thermal differences are relatively large.

Pluhowski, E. J.↗

Multitemporal Cross-Calibration of the Terra MODIS and Landsat 7 ETM+ Reflective Solar Bands

In recent years, there has been a significant increase in the use of remotely sensed data to address global issues. With the open data policy, the data from the Moderate Resolution Imaging Spectroradiometer (MODIS) and Enhanced Thematic Mapper Plus (ETM+) sensors have become a critical component of numerous applications. These two sensors have been operational for more than a decade, providing a rich archive of multispectral imagery for analysis of mutitemporal remote sensing data. This paper focuses on evaluating the radiometric calibration agreement between MODIS and ETM+ using the near-simultaneous and cloud-free image pairs over an African pseudo-invariant calibration site, Libya 4. To account for the combined uncertainties in the top-of-atmosphere (TOA) reflectance due to surface and atmospheric bidirectional reflectance distribution function (BRDF), a semiempirical BRDF model was adopted to normalize the TOA reflectance to the same illumination and viewing geometry. In addition, the spectra from the Earth Observing-1 (EO-1) Hyperion were used to compute spectral corrections between the corresponding MODIS and ETM+ spectral bands. As EO-1 Hyperion scenes were not available for all MODIS and ETM+ data pairs, MODerate resolution atmospheric TRANsmission (MODTRAN) 5.0 simulations were also used to adjust for differences due to the presence or lack of absorption features in some of the bands. A MODIS split-window algorithm provides the atmospheric water vapor column abundance during the overpasses for the MODTRAN simulations. Additionally, the column atmospheric water vapor content during the overpass was retrieved using the MODIS precipitable water vapor product. After performing these adjustments, the radiometric cross-calibration of the two sensors was consistent to within 7%. Some drifts in the response of the bands are evident, with MODIS band 3 being the largest of about 6% over 10 years, a change that will be corrected in Collection 6 MODIS processing.

MODIS↗

Land use mapping and change detection using ERTS imagery in Montgomery County, Alabama

The feasibility of using remotely sensed data from ERTS-1 for mapping land use and detecting land use change was investigated. Land use information was gathered from 1964 air photo mosaics and from 1972 ERTS data. The 1964 data provided the basis for comparison with ERTS-1 imagery. From this comparison, urban sprawl was quite evident for the city of Montgomery. A significant trend from forestland to agricultural was also discovered. The development of main traffic arteries between 1964 and 1972 was a vital factor in the development of some of the urban centers. Even though certain problems in interpreting and correlating land use data from ERTS imagery were encountered, it has been demonstrated that remotely sensed data from ERTS is useful for inventorying land use and detecting land use change.

Wilms, R. P.↗

Remote Imaging of Exploration Flight Test-1 (EFT-1) Entry Heating Risk Reduction

A Measure of Performance (MOP) identified with an Exploration Flight Test-1 (EFT-1) Multi- Purpose Crew Vehicle (MPCV) Program Flight Test Objective (FTO) (OFT1.091) specified an observation during reentry though external ground-based or airborne assets with thermal detection capabilities. The objective of this FTO was to be met with onboard Developmental Flight Instrumentation (DFI), but the MOP for external observation was intended to provide complementary quantitative data and serve as a risk reduction in the event of anomalous DFI behavior (or failure). Mr. Gavin Mendeck, the Entry, Descent, and Landing (EDL) Phase Engineer for the MPCV Program (Vehicle Integration Office/Systems & Mission Integration) requested a risk-reduction assessment from the NASA Engineering and Safety Center (NESC) to determine whether quantitative imagery could be obtained from remote aerial assets to support the external observation MOP. If so, then a viable path forward was to be determined, risks identified, and an observation pursued. If not, then the MOP for external observation was to be eliminated.

Schuster, David M.↗

Developing and Evaluating RGB Composite MODIS Imagery for Applications in National Weather Service Forecast Offices

Satellite remote sensing has gained widespread use in the field of operational meteorology. Although raw satellite imagery is useful, several techniques exist which can convey multiple types of data in a more efficient way. One of these techniques is multispectral compositing. The NASA Short-term Prediction Research and Transition (SPoRT) Center has developed two multispectral satellite imagery products which utilize data from the Moderate Resolution Imaging Spectroradiometer (MODIS) aboard NASA's Terra and Aqua satellites, based upon products currently generated and used by the European Organization for the Exploitation of Meteorological Satellites (EUMETSAT). The nighttime microphysics product allows users to identify clouds occurring at different altitudes, but emphasizes fog and low cloud detection. This product improves upon current spectral difference and single channel infrared techniques. Each of the current products has its own set of advantages for nocturnal fog detection, but each also has limiting drawbacks which can hamper the analysis process. The multispectral product combines each current product with a third channel difference. Since the final image is enhanced with color, it simplifies the fog identification process. Analysis has shown that the nighttime microphysics imagery product represents a substantial improvement to conventional fog detection techniques, as well as provides a preview of future satellite capabilities to forecasters.

Oswald, Hayden↗

Remote-Sensing Time Series Analysis, a Vegetation Monitoring Tool

The Time Series Product Tool (TSPT) is software, developed in MATLAB , which creates and displays high signal-to- noise Vegetation Indices imagery and other higher-level products derived from remotely sensed data. This tool enables automated, rapid, large-scale regional surveillance of crops, forests, and other vegetation. TSPT temporally processes high-revisit-rate satellite imagery produced by the Moderate Resolution Imaging Spectroradiometer (MODIS) and by other remote-sensing systems. Although MODIS imagery is acquired daily, cloudiness and other sources of noise can greatly reduce the effective temporal resolution. To improve cloud statistics, the TSPT combines MODIS data from multiple satellites (Aqua and Terra). The TSPT produces MODIS products as single time-frame and multitemporal change images, as time-series plots at a selected location, or as temporally processed image videos. Using the TSPT program, MODIS metadata is used to remove and/or correct bad and suspect data. Bad pixel removal, multiple satellite data fusion, and temporal processing techniques create high-quality plots and animated image video sequences that depict changes in vegetation greenness. This tool provides several temporal processing options not found in other comparable imaging software tools. Because the framework to generate and use other algorithms is established, small modifications to this tool will enable the use of a large range of remotely sensed data types. An effective remote-sensing crop monitoring system must be able to detect subtle changes in plant health in the earliest stages, before the effects of a disease outbreak or other adverse environmental conditions can become widespread and devastating. The integration of the time series analysis tool with ground-based information, soil types, crop types, meteorological data, and crop growth models in a Geographic Information System, could provide the foundation for a large-area crop-surveillance system that could identify a variety of plant phenomena and improve monitoring capabilities.

McKellip, Rodney↗

Validation of Land Cover Maps Utilizing Astronaut Acquired Imagery

This report is produced in accordance with the requirements outlined in the NASA Research Grant NAG9-1032 titled "Validation of Land Cover Maps Utilizing Astronaut Acquired Imagery". This grant funds the Remote Sensing Research Unit of the University of California, Santa Barbara. This document summarizes the research progress and accomplishments to date and describes current on-going research activities. Even though this grant has technically expired, in a contractual sense, work continues on this project. Therefore, this summary will include all work done through and 5 May 1999. The principal goal of this effort is to test the accuracy of a sub-regional portion of an AVHRR-based land cover product. Land cover mapped to three different classification systems, in the southwestern United States, have been subjected to two specific accuracy assessments. One assessment utilizing astronaut acquired photography, and a second assessment employing Landsat Thematic Mapper imagery, augmented in some cases, high aerial photography. Validation of these three land cover products has proceeded using a stratified sampling methodology. We believe this research will provide an important initial test of the potential use of imagery acquired from Shuttle and ultimately the International Space Station (ISS) for the operational validation of the Moderate Resolution Imaging Spectrometer (MODIS) land cover products.

Estes, John E.↗

DELTA: An Open-Source Framework to Simplify Machine Learning with Satellite Imagery

DELTA (Deep Earth Learning, Tools, and Analysis) is an open-source framework developed at NASA to simplify running and training machine learning (ML) models on satellite imagery. Users new to machine learning can run existing ML models on satellite imagery with minimal setup and configuration. For experienced ML users, DELTA helps simplify data engineering, preprocessing steps, and reduces the need for boilerplate code that needs written to make satellite imagery datasets palatable for machine learning. This lets data scientists focus on model development while DELTA handles the imagery manipulation. This presentation will demonstrate DELTA’s functionality and share some examples from an active project using it for flood mapping using imagery from multiple satellite sources.

deep learning↗

A survey of users of earth resources remote sensing data

The use of Landsat imagery and digital data, Skylab data and high-altitude aerial imagery by industry, government, academic and foreign analysts was surveyed. The study indicated that while most users are satisfied with current Landsat product quality and spectral coverage, there does exist a significant demand for extension of the spectral coverage to thermal and microwave regions, for resolutions in the 20 to 40 and 10 to 20 meter range, and for more rapid data delivery. Problems involving the acceptance of digital processing techniques by some users are also mentioned.

Wukelic, G. E.↗

The Ponta Grossa Arch: A proposal for ts configuration and evolution from the interpretation of remote sensing data

Visual analysis of MSS imagery was used to construct a map of dikes in a wide area of the Ponta Grossa Arch both in the Parana Basin and its basement. Analysis of the map by photographic methods defined the zone of highest density of the dikes, and some aspects of the longitudinal and transverse heterogeneities, as well as localized the apex of the Arch. Borders of the Arch were also suggested. Field investigations confirmed the position of the apex of the flexure on Palezoic sediments and pre-lava Mesozoic sediments. Controversial aspects of the relative absence of dikes in certain units or lithologies and the composition of intrusions surrounding the city of Castro were observed. The apparent synchronism between the activity of the Parana Basin and the Arch is discussed as well as the frequent inverse characteristics of vertical movements. The similarity of rocks in Brazil and Africa is also considered.

Parada, N. D. J.↗

Autonomous Exploration for Gathering Increased Science

The Autonomous Exploration for Gathering Increased Science System (AEGIS) provides automated targeting for remote sensing instruments on the Mars Exploration Rover (MER) mission, which at the time of this reporting has had two rovers exploring the surface of Mars (see figure). Currently, targets for rover remote-sensing instruments must be selected manually based on imagery already on the ground with the operations team. AEGIS enables the rover flight software to analyze imagery onboard in order to autonomously select and sequence targeted remote-sensing observations in an opportunistic fashion. In particular, this technology will be used to automatically acquire sub-framed, high-resolution, targeted images taken with the MER panoramic cameras. This software provides: 1) Automatic detection of terrain features in rover camera images, 2) Feature extraction for detected terrain targets, 3) Prioritization of terrain targets based on a scientist target feature set, and 4) Automated re-targeting of rover remote-sensing instruments at the highest priority target.

Bornstein, Benjamin J.↗

Use of Remote Sensing in the Analysis of Snowmelt Floods

An evaluation was made of remote sensing data, particularly ERTS imagery, in an effort to establish its suitability as an aid in determining percent of snow cover and water content of snow on the ground. Resulting data are used with mathematical simulation models to forecast spring snowmelt floods.

Bowers, C. E.↗

A catalog system for remote-sensing data

The Practical System for Cataloging, Indexing, and Retrieval of Remote Sensing Data developed by the Interdisciplinary Remote Sensing Group at the University of Wisconsin consists of a card catalog, a site-index-map, a site-index-file, an industry-index-file, and a project-index-file. The system is designed for retrieval of remote-sensing data which include imagery, magnetic tapes, flight logs, maps, ground-truth reports, and research reports containing raw data. It can be operated by conventional library methods, but provision has been made for digitizing the system for computer retrieval.

Singh, R. S.↗