Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “reflection coefficient”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Predicting Lightning Initiation using Deep Learning

Lightning occurrence presents safety challenges to people and property. The main challenge with lightning safety is that the majority of guidance is reactive. In other words, lightning has to have already occurred nearby before a person will respond and take shelter. Further, most injuries or fatalities occur as the storm approaches, or as it's moving away, when rainfall may not be present at the time of the flash. Thus, this project develops a physically-based deep learning model to produce lightning probabilities out to 15 minutes. The deep learning model combines a Convolutional Neural Network (CNN) with a Long Short-Term Memory (LSTM) network to capture both the spatial and temporal evolution of storms to predict the probability that lightning initiation will occur in the next 15 minutes. The model combines radar reflectivity, correlation coefficient and differential reflectivity to inferred storm hydrometer type and precipitation phase, which aids in the identification of electrification processes. The model is trained with data from the Geostationary Lightning Mapper (GLM), which is a near infrared sensor onboard the GOES-R series of satellites that measures optical brightness from lightning. This presentation will provide an overview of the project.

Andrew T White↗

Bio-Optical Properties of the Arabian Sea as Determined by In Situ and Sea WiFS Data

The overall objective of this work was to characterize optical and fluorescence properties in the euphotic zone during two British Ocean Flux Study (BOFS) Arabian Sea cruises. This was later expanded in 1995 to include three U.S. JGOFS Arabian Sea Cruises. The region was to be divided into one or more "bio-optical provinces," within each of which a single set of regression models was to be developed to relate the vertical distribution of irradiance attenuation and normalized fluorescence (SF and NF) to remote sensing reflectance and diffuse attenuation coefficient. The working hypothesis was that over relatively large spatial and temporal scales, the vertical profiles of bio-optical properties were predictable. The specific technical objectives were: (1) To characterize the vertical distribution of the inherent and apparent optical properties by measuring downwelling and upwelling irradiances, upwelling radiances, scalar irradiance of PAR, and beam transmissions at each station - from these data, spectral diffuse attenuation coefficients, irradiance reflectances, remote sensing reflectances, surface-leaving radiances and beam attenuation coefficients were determined; (2) To characterize the spectral absorption of total particulate, detrital, and dissolved organic material at each station from discrete water samples; (3) To describe the vertical distribution of photoadaptive properties in the water column by measuring profiles of stimulated (SF) and natural (NF) fluorescence and examining relationships between SF and NF as a function of diffuse optical depth, pigment biomass and primary productivity; and (4) To establish locally derived, in-water algorithms relating remote sensing reflectance spectra to diffuse attenuation coefficients, phytoplankton pigment concentrations and primary productivity, through intercomparisons with in situ measurements, for application to SeaWiFS data.

Trees, Charles C.↗

Acoustic Reflection and Transmission of 2-Dimensional Rotors and Stators, Including Mode and Frequency Scattering Effects

A reduced order modeling scheme has been developed for the unsteady acoustic and vortical coupling between blade rows of a turbomachine. The essential behavior of the system is governed by modal scattering coefficients (i.e., reflection and transmission coefficients) of the rotor, stator, inlet and nozzle, which are calculated as if they were connected to non-reflecting ducts. The objective of this report is to identify fundamental behavior of these scattering coefficients for a better understanding of the role of blade row reflection and transmission in noise generation. A 2D flat plate unsteady cascade model is used for the analysis with the expectation that the general behavior presented herein will carry over to models that include more realistic flow and geometry. It is shown that stators scatter input waves into many modes at the same frequency whereas rotors scatter on frequency, or harmonic order. Important cases are shown here the rotor reflection coefficient is greater than unity; a mode at blade passing frequency (BPF) traveling from the stator with unit sound power is reflected by the rotor with more than unit power at 2xBPF and 3xBPE Analysis is presented to explain this unexpected phenomenon. Scattering curves are presented in a format chosen for design use and for physical interpretation. To aid in interpretation of the curves, formulas are derived for special condition where waveforms are parallel to perpendicular to the rotor.

Hanson, Donald B.↗

Flat-sided rectilinear trough as a solar concentrator - An analytical study

Formulas are derived for the concentration factor and irradiance distribution at the base of the flat-sided linear trough. Performance is affected by the number of reflections the solar rays undergo before reaching the base, the cone apex angle, and the coefficient of reflection. Results are presented graphically in such a way that one can choose the optimum configuration, which is the minimum material required, to achieve a given concentration factor. Practical concentration factors range from 1.5 to 4 depending on the geometry and coefficient of reflection.

Burkhard, D. G.↗

A Maximum Likelihood Approach to Determine Sensor Radiometric Response Coefficients for NPP VIIRS Reflective Solar Bands

Optical sensors aboard Earth orbiting satellites such as the next generation Visible/Infrared Imager/Radiometer Suite (VIIRS) assume that the sensors radiometric response in the Reflective Solar Bands (RSB) is described by a quadratic polynomial, in relating the aperture spectral radiance to the sensor Digital Number (DN) readout. For VIIRS Flight Unit 1, the coefficients are to be determined before launch by an attenuation method, although the linear coefficient will be further determined on-orbit through observing the Solar Diffuser. In determining the quadratic polynomial coefficients by the attenuation method, a Maximum Likelihood approach is applied in carrying out the least-squares procedure. Crucial to the Maximum Likelihood least-squares procedure is the computation of the weight. The weight not only has a contribution from the noise of the sensor s digital count, with an important contribution from digitization error, but also is affected heavily by the mathematical expression used to predict the value of the dependent variable, because both the independent and the dependent variables contain random noise. In addition, model errors have a major impact on the uncertainties of the coefficients. The Maximum Likelihood approach demonstrates the inadequacy of the attenuation method model with a quadratic polynomial for the retrieved spectral radiance. We show that using the inadequate model dramatically increases the uncertainties of the coefficients. We compute the coefficient values and their uncertainties, considering both measurement and model errors.

Lei, Ning↗

Complex Permittivities of Candidate Radome Materials at W-band

This report presents the results of w-band complex permittivity measurements performed in NASA Langley's Electromagnetics Research Branch. The test articles included in the permittivity study were flat panels of materials which are under consideration for use in a radome for the Passive Millimeter Wave Camera (PMMWC) flight experiment. This experiment is scheduled to fly on the Air Force's 'Speckled Trout' aircraft in late 1997. The radome design is very important because the PMMWC can tolerate only a small amount of electromagnetic loss through the radome. A free space measurement system was used to obtain complex reflection and transmission coefficients of the samples. The frequency of interest was 89 GHz, so measurements were performed over a range of 79 to 99 GHz. The transmission and reflection coefficients were used, along with the measured sample thickness, to calculate complex permittivity over the frequency range. The material samples measured in this study can be divided into four categories: skin materials, core materials, coating materials, and layered samples.

Cravey, Robin↗

A Multi-Band Analytical Algorithm for Deriving Absorption and Backscattering Coefficients from Remote-Sensing Reflectance of Optically Deep Waters

A multi-band analytical (MBA) algorithm is developed to retrieve absorption and backscattering coefficients for optically deep waters, which can be applied to data from past and current satellite sensors, as well as data from hyperspectral sensors. This MBA algorithm applies a remote-sensing reflectance model derived from the Radiative Transfer Equation, and values of absorption and backscattering coefficients are analytically calculated from values of remote-sensing reflectance. There are only limited empirical relationships involved in the algorithm, which implies that this MBA algorithm could be applied to a wide dynamic range of waters. Applying the algorithm to a simulated non-"Case 1" data set, which has no relation to the development of the algorithm, the percentage error for the total absorption coefficient at 440 nm a (sub 440) is approximately 12% for a range of 0.012 - 2.1 per meter (approximately 6% for a (sub 440) less than approximately 0.3 per meter), while a traditional band-ratio approach returns a percentage error of approximately 30%. Applying it to a field data set ranging from 0.025 to 2.0 per meter, the result for a (sub 440) is very close to that using a full spectrum optimization technique (9.6% difference). Compared to the optimization approach, the MBA algorithm cuts the computation time dramatically with only a small sacrifice in accuracy, making it suitable for processing large data sets such as satellite images. Significant improvements over empirical algorithms have also been achieved in retrieving the optical properties of optically deep waters.

Lee, Zhong-Ping↗

Regionally applicable angular reflectance models

Determination of the angular variation of the reflected radiance field in order to infer the reflected component of the Earth radiation budget from medium or narrow field of view radiometer measurements is discussed. An average angular model applicable at 250 to 1000 km is presented and evaluated. The nature of the convergence of the radiance patterns to the regional means is also discussed. Radiances measured during summer Monex 1979, from Hudson Bay to Saudi Arabia, were averaged and then normalized by multiplying by pi and dividing by the scene-averaged reflected flux density. This casts the model into the inverse of the bidirectional reflectance normalization coefficient, which has the value of unity for an isotropic surface. The reflected component of the Earth's radiation budget is inferred to an accuracy of about 2.5%.

Davis, J. M.↗

Optical parameters of leaves of seven weed species

The absorption coefficient (k), infinite reflectance (R), and scattering coefficient (s) were tabulated for five wavelengths and analyzed for statistical differences for seven weed species. The wavelengths were: 0.55-micrometer, 0.65-micrometers, 0.85-micrometer, 1.65-micrometers, and 2.20-micrometer. The R of common lambsquarters (Chenopodium album L.), Johnsongrass (Sorghum halepense (L.) Pers.), and annual sowthistle (Sonchus oleraceus L.) leaves at the 0.85-micrometer wavelength were significantly (p=0.05) higher than for sunflower (Heliantus annus L.), ragweed parthenium (Parthenium hysterophorus L.), or London rocket (Sisymbrium irio L.). Annual sowthistle had the largest k value, and Plamer amaranth (Amaranthus palmer S. Wats.) had the smallest k value at the 0.65 approximately chlorophyll absorption wavelength. In general, john-songress, ragweed parthenium, or London rocket had the largest s values among the five wavelengths, wereas annual sowthistle and plamar amaranth were usually lowest.

Gausman, H. W.↗

Evaluating Multispectral Snowpack Reflectivity With Changing Snow Correlation Lengths

This study investigates the sensitivity of multispectral reflectivity to changing snow correlation lengths. Matzler's ice-lamellae radiative transfer model was implemented and tested to evaluate the reflectivity of snow correlation lengths at multiple frequencies from the ultraviolet (UV) to the microwave bands. The model reveals that, in the UV to infrared (IR) frequency range, the reflectivity and correlation length are inversely related, whereas reflectivity increases with snow correlation length in the microwave frequency range. The model further shows that the reflectivity behavior can be mainly attributed to scattering rather than absorption for shallow snowpacks. The largest scattering coefficients and reflectivity occur at very small correlation lengths (approximately 10(exp -5 m) for frequencies higher than the IR band. In the microwave range, the largest scattering coefficients are found at millimeter wavelengths. For validation purposes, the ice-lamella model is coupled with a multilayer snow physics model to characterize the reflectivity response of realistic snow hydrological processes. The evolution of the coupled model simulated reflectivities in both the visible and the microwave bands is consistent with satellite-based reflectivity observations in the same frequencies. The model results are also compared with colocated in situ snow correlation length measurements (Cold Land Processes Field Experiment 2002-2003). The analysis and evaluation of model results indicate that the coupled multifrequency radiative transfer and snow hydrology modeling system can be used as a forward operator in a data-assimilation framework to predict the status of snow physical properties, including snow correlation length.

Kang, Do Hyuk↗

Satellite discrimination of snow/cloud surfaces

Differentiation between cloud cover and snow surfaces using remotely sensed data is complicated by the similarity of their radiative temperatures, and also by their similar reflectances at visible wavelengths. A method of cloud analysis over snow-covered regions is presented, using 1.51-1.63 micron data from an experimental sensor on board a U.S. Air Force Defense Meteorological Satellite Program platform. At these wavelengths, snow appears relatively 'black' while clouds are highly reflective. The spatial structure of the 1.51-1.63 micron reflectivity fields over a continuous snow surface are examined. Plots of mean reflectance against coefficients of variation for 4 x 4 pixel areas reveals a cluster of points have low reflectivity and low variability, corresponding to snow-covered (cloud free) areas, and a similar cluster with high reflectances corresponding to 100 per cent cloud cover. For the case of a single layered cloud, the radiances associated with partially filled fields of view are also inferred.

Crane, R. G.↗

Sound diffraction at wall impedance discontinuities in a circular cylinder, investigated using Wiener-Hopf technique

Rigorous solutions are presented for sound diffraction in a circular cylinder with axial discontinuities of the wall admittance (or impedance). Analytical expressions are derived for the reflection and the transmission coefficients for duct modes. The results are discussed quantitatively in the limits of small admittance shifts (delta) and of low frequencies (ka). One of the results is the low frequency behavior of the reflection coefficient R(o) sub 00 of the fundamental mode. For the mode of a hardwall duct reflected from the junction with a softwall duct, (R(o) sub oo yields - (1-square root of (ka) square root of (2/i delta)); this result is in contrast to the frequency dependence of the reflection from the open end of a hardwall duct, for which R(o) sub oo yields - 1-(ka) squared/2 .

Cho, Y. C.↗

Bidirectional reflectance spectroscopy. IV - The extinction coefficient and the opposition effect

An analytical model is developed for the opposition effect (heiligenshein) in the case of light scattering from a semi-infinite, particulate medium with particles that are large relative to the wavelength. The effect is common for natural materials, and comprises a brightness surge in light diffusively reflected from a surface at near zero phase. A generalized expression is devised for the extinction coefficient of a particulate medium. Models are developed for step function and hyperbolic tangent distributions of light scattered from a stratified medium and exhibiting the opposition effect. A maximum brightness amplitude increase of 0.753 is projected for the effect. Greater values must have other causes.

Hapke, B.↗

Surface wave diffraction by a truncated dielectric slab recessed in a perfectly conducting surface

The diffraction of a TM sub 0 surface wave by a terminated dielectric slab which is flush mounted in a perfectly conducting surface is studied. The incident surface wave gives rise to waves reflected and diffracted by the termination; these reflected and diffracted fields may be expressed in terms of the geometrical theory of diffraction by introducing surface wave reflection and diffraction coefficients which are associated with the termination. In this investigation the surface wave reflection and diffraction coefficients have been deduced from a formally exact solution to this canonical problem. The solution is obtained via a combination of the generalized scattering matrix technique and the Wiener-Hopf procedure. Expressions for the reflection and diffraction coefficients contain integrals which can be evaluated numerically.

Pathak, P. H.↗