SEARCH · Engineering Papers

Results for “quantum wells”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

All sources NASA NTRS DOE OSTI

DOE OSTI2023

Valley-Tunable Even-Denominator Fractional Quantum Hall State in the Lowest Landau Level of an Anisotropic System

Fractional quantum Hall states (FQHSs) at even-denominator Landau level filling factors (v) are of prime interest as they are predicted to host exotic, topological states of matter. Here, we report here the observation of a FQHS at v = 1/2 in a two-dimensional electron system of exceptionally high quality, confined to a wide AlAs quantum well, where the electrons can occupy multiple conduction-band valleys with an anisotropic effective mass. The anisotropy and multivalley degree of freedom offer an unprecedented tunability of the v = 1/2 FQHS as we can control both the valley occupancy via the application of in-plane strain, and the ratio between the strengths of the short- and long-range Coulomb interaction by tilting the sample in the magnetic field to change the electron charge distribution. Thanks to this tunability, we observe phase transitions from a compressible Fermi liquid to an incompressible FQHS and then to an insulating phase as a function of tilt angle. We find that this evolution and the energy gap of the v = 1/2 FQHS depend strongly on valley occupancy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2023

Delocalization and Universality of the Fractional Quantum Hall Plateau-to-Plateau Transitions

Disorder and electron-electron interaction play essential roles in the physics of electron systems in condensed matter. In two-dimensional, quantum Hall systems, extensive studies of disorder-induced localization have led to the emergence of a scaling picture with a single extended state, characterized by a power-law divergence of the localization length in the zero-temperature limit. Experimentally, scaling has been investigated via measuring the temperature dependence of plateau-to-plateau transitions between the integer quantum Hall states (IQHSs), yielding a critical exponent κ ≃ 0.42. Here, in this study, we report scaling measurements in the fractional quantum Hall state (FQHS) regime where interaction plays a dominant role. Our Letter is partly motivated by recent calculations, based on the composite fermion theory, that suggest identical critical exponents in both IQHS and FQHS cases to the extent that the interaction between composite fermions is negligible. The samples used in our experiments are two-dimensional electron systems confined to GaAs quantum wells of exceptionally high quality. We find that κ varies for transitions between different FQHSs observed on the flanks of Landau level filling factor v = 1/2 and has a value close to that reported for the IQHS transitions only for a limited number of transitions between high-order FQHSs with intermediate strength. We discuss possible origins of the nonuniversal κ observed in our experiments.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2020

High-Speed Nonpolar InGaN/GaN Superluminescent Diode With 2.5 GHz Modulation Bandwidth

We demonstrate a superluminescent diode fabricated on a nonpolar m-plane GaN substrate by employing a linearly tapered waveguide design. A high electrical -3dB modulation bandwidth ( f\n 3dB \n) of 2.5 GHz at a current density of 30 kA/cm\n 2 \n is achieved. The high modulation bandwidth is attributed to the shorter carrier recombination lifetime, the linear gain curve in the nonpolar m-plane quantum wells, and the ability to operate at high current densities while effectively suppressing lasing. We derive a general expression for the -3dB bandwidth as a function of current density for SLDs using a similar approach to that for laser diodes. The -3dB bandwidth of a nonpolar superluminescent diode increases exponentially with current density. The experimental results are consistent with the derived expression for f\n 3dB \n vs. current density.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2022

Temperature Dependence of Charge Distributions and Carrier Mobility in an Undoped Si/SiGe Heterostructure

Capacitance–voltage (C–V ) characteristics and carrier transport properties of 2-D electron gases (2DEGs) in an undoped Si/SiGe heterostructure at T = 4 – 35 K are presented here. In this work, two capacitance plateaus due to density saturation of the 2DEG in the buried Si quantum well (QW) are observed and explained by a model of surface tunneling. The peak mobility at 4 K is 4.1 × 10 5 cm 2 /V·s and enhanced by a factor of 1.97 at an even lower carrier density compared to the saturated carrier density, which is attributed to the effect of remote carrier screening. At T = 35 K, the mobility enhancement with a factor of 1.35 is still observed, which suggests the surface tunneling is still dominant.

42 ENGINEERING↗

DOE OSTI2023

Optical anisotropy of CsPbBr3 perovskite nanoplatelets

Abstract The two-dimensional CsPbBr 3 nanoplatelets have a quantum well electronic structure with a band gap tunable with sample thicknesses in discreet steps based upon the number of monolayers. The polarized optical properties of CsPbBr 3 nanoplatelets are studied using fluorescence anisotropy and polarized transient absorption spectroscopies. Polarized spectroscopy shows that they have absorption and emission transitions which are strongly plane-polarized. In particular, photoluminescence excitation and transient absorption measurements reveal a band-edge polarization approaching 0.1, the limit of isotropic two-dimensional ensembles. The degree of anisotropy is found to depend on the thickness of the nanoplatelets: multiple measurements show a progressive decrease in optical anisotropy from 2 to 5 monolayer thick nanoplatelets. In turn, larger cuboidal CsPbBr 3 nanocrystals, are found to have consistently positive anisotropy which may be attributed to symmetry breaking from ideal perovskite cubes. Optical measurements of anisotropy are described with respect to the theoretical framework developed to describe exciton fine structure in these materials. The observed planar absorption and emission are close to predicted values at thinner nanoplatelet sizes and follow the predicted trend in anisotropy with thickness, but with larger anisotropy than theoretical predictions. Dominant planar emission, albeit confined to the thinnest nanoplatelets, is a valuable attribute for enhanced efficiency of light-emitting devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

DOE OSTI2020

Ground-State In-Plane Light-Holes in GaAs/AlGaAs Structures [Book Chapter]

We have performed low-temperature magnetoluminescence, far-infrared cyclotron resonance, and magneto-transport measurements on narrow (4.5 nm) GaAs/Al 0.25 Ga 0.75 As single quantum-wells. The ground state in-plane valence band was found to be light and very nonparabolic, i.e., at zone center, the valence band mass is m v ≈ 0. 1 and for E f ≈ 10 meV, m v ≈ 0.25.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Ultrafast optical switching and power limiting in intersubband polaritonic metasurfaces

Highly nonlinear optical materials with fast third-order nonlinear optical response are crucial for the operation of all-optical photonic devices, such as switches for signal processing and computation, power limiters, and saturable absorbers. The nonlinear response of traditional optical materials is weak, thus requiring large light intensities to induce significant changes in their properties. Here we show that optical control of the coupling rate in subwavelength patch antennas coupled to intersubband transitions in multi-quantum-well semiconductor heterostructures can provide a giant third-order nonlinear response, on the order of 3.4 × <#comment/> 10 − <#comment/> 13 m 2 / V 2 , with a response time < <#comment/> 2 p s . We utilize this effect to realize intersubband polaritonic metasurfaces and demonstrate their operation as highly nonlinear saturable and reverse saturable absorbers, enabling optical power limiters and other elements for all-optical modulation and control. Our approach enables a plethora of compact, low-power, highly nonlinear devices with spectral, temporal, and structured wavefront responses tailored by design.

Mann, Sander A. (ORCID:0000000277420615)↗

DOE OSTI2022

High Efficiency InGaN LEDs Emitting in Green, Amber and Beyond (Final Report)

This project focuses on developing high efficiency light emitting diodes (LEDs) with green, amber, and longer wavelengths using two compatible material systems based on III-nitride and II-IV-nitride semiconductor heterostructures. The proposed approach uses low-indium-content InGaN and ZnGeN 2 or ZnSnN 2 heterostructure quantum wells (QWs) as the active regions for high efficiency green and amber LEDs, and therefore to advance high efficiency color-mixed white LED technology. This approach takes advantage of the increased flexibility, afforded by the incorporation of the II-IV-nitrides into the III-nitride layers, to tune the QW active region to lower the emission wavelengths and to increase the electron-hole wave function overlap. This strategy paves a new way to extend the InGaN QW LED emission wavelength without using high-indium-content InGaN. An industrially preferable metalorganic chemical vapor deposition (MOCVD) method was used to develop the growth of ZnGeN 2 and ZnSnN 2 that are compatible with the InGaN growth. The unique dual chamber MOCVD instrument at OSU was used in this project. This program created an opportunity for the two institutions (The Ohio State University and Case Western Reserve University) with complementary expertise to perform this work. Two graduate students (Md Rezaul Karim (OSU) and Benthara Hewage Dinushi Jayatunga (CWRU)) gained experience in MOCVD growth and various characterization methods including scanning electron microscopy, x-ray diffraction spectroscopy, x-ray photoemission spectroscopy, Hall measurements, cathodoluminescence and photoluminescence. Both students successfully defended their PhD dissertations in April/May 2021. Both Karim and Jayatunga have joined Intel as engineers in June/July 2021. Another two graduate students Kaitian Zhang (OSU) and Chenxi Hu (CWRU) joined the project team since spring 2021 to continue on this project. They were trained on MOCVD epitaxy of InGaN QWs and materials characterization including SEM, AFM, PL, CL, XRD, Hall measurements and electroluminescence. A third student, Vijay Gopal Thirupakuzi Vangipuram (OSU), who joined the group in fall 2021 to perform LED fabrication and characterization. The key research accomplishments of the project include: (1) Successful development of MOCVD epitaxy of single crystalline ZnGeN 2 and ZnSnN 2 . MOCVD growth parameters that determine the stoichiometry of ZnGeN 2 and ZnSnN 2 films were identified. (2) Experimentally determined the band offsets between GaN/ZnGeN 2 and GaN/ZnGaSnN 2 hetero-interfaces, which agree very well with the theoretical predictions. (3) Demonstrated the incorporation of thin ZnGeN 2 layer in InGaN QWs. Proof-of-concept of the InGaN-ZnGeN 2 QW design demonstrated as much as 80 nm of red shift without increasing In composition or QW thickness. (4) InGaN/ZnGeN 2 QWs emitting at 480 nm achieved IQE of 47%. Resulted from this project, 7 journal articles were published, and 9 conference papers were presented.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Aging Mechanisms of Broad Area High-Power ~800nm Laser Diodes

Improved lifetime of high-power broad area laser diodes will enhance their utility for manufacturing, scientific, and medical laser systems. However, factors contributing to gradual degradation of diode laser performance are not fully understood. Here we study the aging mechanisms of ~800 nm aluminum-free laser diodes grown by solid-source MBE. Oxygen was intentionally introduced at three different concentration levels into the quantum well (QW) and waveguide (WG) at concentrations <5×10 15 cm -3 . Diode power, slope efficiency (SE th ), threshold current (I th ), and device parameters such as QW and WG lifetimes were measured at discrete time steps throughout the aging run. The data show that lasing characteristics prior to aging are degraded by oxygen introduction, but the gradual power degradation rate of ~5% over 500 hours at current density 1.74 kA/cm 2 does not change with oxygen concentration. Aging-induced changes in nonradiative lifetimes and threshold were observed for shorter aging times, but stabilized after ~100 hrs. and cannot explain the observed power degradation. This suggests that gradual degradation in these devices is not due to nonradiative recombination at low levels of point defects. The data shows that this degradation results primarily from changes in slope efficiency, and simulation of these results suggests that the power degradation arises from increased intracavity absorption (ICA). Efforts to slow ICA growth, instead of efforts to control low levels of nonradiative recombination centers, may be the most fruitful path forward to improve laser diode lifetime.

42 ENGINEERING↗

DOE OSTI2025

Hybrid Metal Halides: Advancing Optoelectronic Materials (Final Technical Report)

Hybrid metal halides, particularly main group halide perovskites, are a unique class of materials that oﬀer exceptional optoelectronic properties along with a remarkable materials design space. Initial research on this class of materials was driven by the ability of the prototype hybrid 3D perovskite-structured compound methylammonium lead iodide to function as the active layer in thin film solar cells. It is now known that this class of materials comprise a large family with tunable band gaps, relatively high charge carrier mobilities in both single crystal and polycrystalline forms, and relatively low concentrations of (deleterious) electrically active states within the band gap. Beyond applications in solar cells, the potential of these materials has been extended to emitters in light emitting diodes, and active components of radiation detectors. Complementing new functionality, the design space for hybrid metal halides continues to increase with discovery of new structural motifs. In this project, the combination of organic and inorganic functionalities has been employed to open pathways to the design and synthesis new, functional hybrid metal halides. Beyond the simple perovskites, Ruddlesden-Popper and Dion-Jacobsen compounds, and other variants, such as the newly advanced “hollow” perovskites have been studied. The materials have provided routes to understanding the unique electronic properties of hybrid metal halides because of their natural quantum well structures as well as other means of controlling band gaps and band dispersions. Understanding these materials, including the design rules for their formation, their structures and compositions in bulk and in thin films form, and the role of local (non-crystallographic) structure has an important aspect of this endeavor. The goal of advancing new materials and new fundamental understanding within this deceptively simple, yet fascinating class of compounds, so richly endowed with interesting and useful functionality, has been fulfilled.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Investigation of Nucleation and Growth at a Liquid–Liquid Interface by Solvent Exchange and Synchrotron Small-Angle X-Ray Scattering

Hybrid nanomaterials possess complex architectures that are driven by a self-assembly process between an inorganic element and an organic ligand. The properties of these materials can often be tuned by organic ligand variation, or by swapping the inorganic element. This enables the flexible fabrication of tailored hybrid materials with a rich variety of properties for technological applications. Liquid-liquid interfaces are useful for synthesizing these compounds as precursors can be segregated and allowed to interact only at the interface. Although procedurally straightforward, this is a complex reaction in an environment that is not easy to probe. Here, we explore the interfacial crystallization of mithrene, a supramolecular multi-quantum well. This material sandwiches a well-defined silver-chalcogenide layer between layers of organic ligands. Controlling mithrene crystal size and morphology to be useful for applications requires understanding details of its crystal growth, but the specific mechanism for this reaction remain only lightly investigated. We performed a study of mithrene crystallization at an oil-water interfaces to elucidate how the interfacial free energy affects nucleation and growth. We exchanged the oil solvent on the basis of solvent viscosity and surface tension, modifying the dynamic contact angle and interfacial free energy. We isolated and characterized the reaction byproducts via scanning electron microscopy (SEM). We also developed a high-throughput small angle X-ray scattering (SAXS) technique to measure crystallization at short reaction timescales (minutes). Our results showed that modifying interfacial surface energy affects both the reaction kinetics and product size homogeneity and yield. Our SAXS measurements reveal the onset of crystallinity after only 15 min. These results provide a template for exploring directed synthesis of complex materials via experimental methods.

Schriber, Elyse A.↗

DOE OSTI2021

Study of an Integration Platform Based on an Adiabatic Active-Layer Waveguide Connection for InP Photonic Device Integration Mirroring That of Heterogeneous Integration on Silicon

In this work, a photonic device integration platform capable of integration of active-passive InP-based photonic devices without the use of material regrowth is introduced. The platform makes use of an adiabatic active-layer waveguide connection (ALWC) to move an optical beam between active and passive devices. The performance of this platform is analyzed using an example made up of four main sections: (1) a fiber coupling section for enabling vertical beam coupling from optical fiber into the photonic chip using a mode-matched surface grating with apodized duty cycles; (2) a transparent waveguide section for realizing passive photonic devices; (3) an adiabatic mode connection structure for moving the optical beam between passive and active device sections; and (4) an active device section for realizing active photonic devices. It is shown that the coupled surface grating, when added with a bottom gold reflector, can achieve a high chip-to-fiber coupling efficiency (CE) of 88.3% at 1550 nm. The adiabatic active-layer mode connection structure has an optical loss of lower than 1% (CE > 99%). The active device section can achieve an optical gain of 20 dB/mm with the use of only 3 quantum wells. The optimized structural parameters of the entire waveguide module are analyzed and discussed.

42 ENGINEERING↗

DOE OSTI2024

Design and Performance of an InAs Quantum Dot Scintillator with Integrated Photodetector

A new scintillation material composed of InAs quantum dots (QDs) hosted within a GaAs matrix was developed, and its performance with different types of radiation is evaluated. A methodology for designing an integrated photodetector (PD) with a low defect density and that is optically matched to the QD’s emission spectrum is introduced, utilizing an engineered epitaxial InAlGaAs metamorphic buffer layer. The photoluminescence (PL) collection efficiency of the integrated PD is examined using two-dimensional scanning laser excitation. The detector response to 5.5 MeV α-particles and 122 keV photons is presented. Yields of 13 electrons/keV for α-particles and 30–60 electrons/keV for photons were observed. The energy resolution of 12% observed with α-particles was mainly limited by noise- and geometry-related optical losses. The radiation hardness of an InAs QDs hosted within GaAs and a wider band gap AlGaAs ternary alloy was studied under a 1 MeV proton implantation up to a 10 14 cm –2 dose. The integrated PL responses were compared to evaluate PL quenching due to non-radiative defects. The QDs embedded in the AlGaAs demonstrated improved radiation hardness compared to QDs in the GaAs matrix and in the InGaAs quantum wells.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Mid-infrared vertical cavity laser

Disclosed is an optically pumped vertical cavity laser structure operating in the mid-infrared region, which has demonstrated room-temperature continuous wave operation. This structure uses a periodic gain active region with type I quantum wells comprised of InGaAsSb, and barrier/cladding regions which provide strong hole confinement and substantial pump absorption. A preferred embodiment includes at least one wafer bonded GaAs-based mirror. Several preferred embodiments also include means for wavelength tuning of mid-IR VCLs as disclosed, including a MEMS-tuning element. This document also includes systems for optical spectroscopy using the VCL as disclosed, including systems for detection concentrations of industrial and environmentally important gases.

42 ENGINEERING↗

DOE OSTI2022

Efficiency Improvement Progress in Green, Yellow and Red III Nitride LEDs

Large improvements in the efficiencies of visible light emitting diodes (LEDs) have been realized over the last decade. Extending the range of wavelengths over which efficient emission can be realized continues to be a goal of active research. Efficiency droop refers to a non-thermal decrease in internal quantum efficiency with increasing current density that affects III-nitride LEDs in general, but more severely those with longer emission wavelengths. The so-called green gap is mainly related to the wavelength dependence of efficiency droop. The peak EQE in commercial green LEDs exceeds 60% but corresponds to a current density that is an order of magnitude lower than required for applications. In this presentation, we will review some of the underlying physics that contribute to the wavelength dependence of droop. We will discuss some challenges in the development of long wavelength III-nitride LEDs and possible strategies to mitigate efficiency droop based on the understanding that nonradiative Auger recombination is the root cause. One general strategy is to engineer the multi-quantum well active region to minimize the average carrier density. Another approach is to design wells with a more favorable balance between the radiative and Auger coefficients. Finally, we will present the current status of the performance of green, yellow and red III-Nitride LEDs.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2022

Triple-Junction III-V Solar Cells with 39.5% AM1.5G and 34.2% AM0 Efficiencies

III-V multijunction solar cells have the highest efficiencies of any PV technology. These devices are currently the dominant space PV technology, and are being investigated for a wide range of other applications where efficiency is a key metric. In this presentation, we describe a 3-junction cell with the highest 1-sun efficiency to date: 39.5% under the global spectrum, which is higher than previous 6-junction devices. When tuned for the space spectrum, the cell achieves 34.2% beginning-of-life efficiency, without consideration for radiation hardness. These efficiency improvements are enabled by combining advances in device architectures and extended-defect control strategies. This latest 3-junction device includes a high-performance front-junction GaInP top cell, an optically-thick strain-balanced quantum well middle cell, and a lattice-mismatched GaInAs bottom cell with record performance despite dislocations. These advances not only allow high efficiency photovoltaics for both space and terrestrial PV applications, but also help enable new applications of III-V materials.

GaInAs↗

DOE OSTI2022

Mid-infrared vertical cavity laser

Jayaraman, Vijaysekhar↗

DOE OSTI2025

Carrier Lifetime Control Through the Quantum Confined Stark Effect

This study explores how the quantum confined Stark effect (QCSE) influences minority carrier lifetimes in III-N quantum wells (QWs) by varying the well width. It is found that increasing QW width from zero (bulk material) increases radiative lifetime due to charge separation until charge screening effects reduce and rectify the QCSE for large well widths.

Loveless, James Terrell [Sandia National Laborator↗