Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “photophysics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Energy Transfer in Aqueous Light Harvesting Antennae Based on Brush-like Inter-Conjugated Polyelectrolyte Complexes

Conjugated polyelectrolytes (CPEs) have the potential to serve as building blocks of artificial light-harvesting systems. This is primarily due to their delocalized electronic states and potential for hierarchical self-assembly. We showed previously that inter-CPE complexes composed of oppositely charged exciton-donor and exciton-acceptor CPEs displayed efficient electronic energy transfer. However, near ionic charge equivalence, complexed CPE chains become net-neutral and thus experience a precipitous drop in aqueous solubility. To increase the stability and to rationally manipulate the phase behavior of inter-CPE complexes, we synthesized a series of highly water-soluble exciton-donor CPEs composed of alternating ionic and polar nonionic fluorene monomers. The nonionic monomer contained oligo(ethyleneglycol) sidechains of variable length. We then formed exciton donor-acceptor complexes and investigated their relative energy transfer efficiencies in the presence of a fixed exciton-acceptor CPE. We find that, even when the polar nonionic sidechains become quite long (nine ethyleneglycol units), the energy transfer efficiency is hardly affected so long as the inter-CPE network retains a net polyelectrolyte charge. However, near the onset of spontaneous phase separation, we observe a clear influence of the length of the oligo(ethyleneglycol) sidechains on the photophysics of the complex. Our results have implications for the use of polyelectrolyte phase separation to produce aqueous light-harvesting soft materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Direct Correlation of Charge Carrier Transport to Local Crystal Quality in Lead Halide Perovskites

Although solution processing methods provide an attractive route toward development of low-cost functional materials, these accessible fabrication approaches can engender high concentrations of microscopic structural defects that are detrimental to performance. In lead halide perovskites, structural disorder derived from solution processing has been implicated as an important determiner of photophysical properties. However, a direct correlation between the functional properties of these materials and the local crystal structure in which non-equilibrium states evolve has remained elusive, in part because structural heterogeneities occur on length scales that defy conventional characterization techniques. To address this knowledge gap, in this work we have combined ultrafast pump–probe microscopy and electron backscattering diffraction to directly correlate charge carrier transport with the local diffraction pattern contrast, an indicator of crystal quality. Spatial correlation of these measurements strongly suggests that even on individual single crystal CsPbBr3 domains, microscopic variability in the crystal quality profoundly impacts the efficiency of charge carrier transport.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Twist-Angle-Dependent Ultrafast Charge Transfer in MoS 2 -Graphene van der Waals Heterostructures

Vertically stacked transition metal dichalcogenide-graphene heterostructures provide a platform for novel optoelectronic applications with high photoresponse speeds. Photoinduced nonequilibrium carrier and lattice dynamics in such heterostructures underlie these applications but have not been understood. In particular, the dependence of these photoresponses on the twist angle, a key tuning parameter, remains elusive. Here, using ultrafast electron diffraction, we report the simultaneous visualization of charge transfer and electron–phonon coupling in MoS 2 -graphene heterostructures with different stacking configurations. We find that the charge transfer timescale from MoS 2 to graphene varies strongly with twist angle, becoming faster for smaller twist angles, and show that the relaxation timescale is significantly shorter in a heterostructure as compared to a monolayer. These findings illustrate that twist angle constitutes an additional tuning knob for interlayer charge transfer in heterobilayers and deepen our understanding of fundamental photophysical processes in heterostructures, of importance for future applications in optoelectronics and light harvesting.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2022

Acceleration of Biexciton Radiative Recombination at Low Temperature in CdSe Nanoplatelets

Colloidal semiconductor nanocrystals offer bandgap tunability, high photoluminescence quantum yield, and colloidal processing of benefit to optoelectronics, however rapid nonradiative Auger recombination (AR) deleteriously affects device efficiencies at elevated excitation intensities. AR is understood to transition from temperature-dependent behavior in bulk semiconductors to temperature-independent behavior in zero-dimensional quantum dots (QDs) as a result of discretized band structure that facilitates satisfaction of linear momentum conservation. For nanoplatelets (NPLs), two-dimensional morphology renders prediction of photophysical behaviors challenging. Here, in this study, we investigate and compare the temperature dependence of excited-stated lifetime and fluence-dependent emission of CdSe NPLs and QDs. For NPLs, upon temperature reduction, biexciton lifetime surprisingly decreases (even becoming shorter lived than trion emission) and emission intensity increases nearly linearly with fluence rather than saturating, consistent with dominance of radiative recombination rather than AR. CdSe NPLs thus differ fundamentally from core-only QDs and foster increased utility of photogenerated excitons and multiexcitons at low temperatures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Size-Dependent Thermal Shifts to MOF Nanocrystal Optical Gaps Induced by Dynamic Bonding

Conventional semiconductor nanocrystals exhibit wide-ranging optical behavior, whereas the size-dependent photophysical properties of metal–organic framework (MOF) nanocrystals remain an open research frontier. Furthermore, we present size- and temperature-dependent optical absorption spectra of common MOFs with particle sizes ranging from tens of nanometers to several micrometers. All materials exhibit optical gaps that decrease at elevated temperatures, which we attribute to the dynamic nature of MOF metal–linker bonds. Accordingly, whereas the labile titanium–carboxylate bonds of MIL-125 give rise to bandgaps that red-shift by ~600 meV over 300 K, the more rigid zinc–imidazolate bonds of ZIF-8 produce a red-shift of only ~10 meV. Furthermore, smaller particles induce far larger decreases to optical gaps. Taken together, these results suggest MOF bonding becomes more flexible with smaller nanocrystal sizes, offering a powerful tool for manipulating optical behavior through composition, temperature, and dimensionality.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Triplet-Induced Singlet Oxygen Photobleaches Near-Infrared Dye-Sensitized Upconversion Nanosystems

The rapid photobleaching of near-infrared (NIR) dye-sensitized upconversion nanosystems is one of the crucial problems that has blocked their technological applications. Uncovering the photophysical and photochemical pathways of NIR dyes would help to elucidate the photobleaching mechanism and thereby improve the photostability of the system. Here we investigate the triplet dynamics of NIR dyes and their interaction with triplet oxygen in the typically investigated IR806-sensitized upconversion nanoparticle (UCNP) nanosystem. Low-temperature fluorescence at 77 K provides direct proof of the generation of singlet oxygen ( 1 O 2 ) under 808 nm laser irradiation. Further, mass spectrometry indicates that all three double bonds in the structure of IR806 can be broken in the photochemical process. Coupling IR806 to the surface of UCNPs can accelerate its triplet dynamics, thus producing more 1 O 2 to photocleave IR806. Importantly, we find that the addition of β-carotene can scavenge the generated 1 O 2 , thereby providing a simple method to effectively inhibit photobleaching.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2024

Exciton Enhanced Nonlinear Optical Responses in Monolayer h-BN and MoS 2 : Insight from First-Principles Exciton-State Coupling Formalism and Calculations

Excitons are vital in the photophysics of materials, especially in low-dimensional systems. The conceptual and quantitative understanding of excitonic effects in nonlinear optical (NLO) processes is more challenging compared to linear ones. Here, we present an ab initio approach to second-order NLO responses, incorporating excitonic effects, that employs an exciton-state coupling formalism and allows for a detailed analysis of the role of individual excitonic states. Taking monolayer h-BN and MoS 2 as two prototype 2D materials, we calculate their second harmonic generation (SHG) susceptibility and shift current conductivity tensor. We find strong excitonic enhancement in the NLO responses requires that the resonant excitons are not only optically bright themselves but also able to couple strongly to other bright excitons. Our results explain the occurrence of two strong peaks in the SHG of monolayer h-BN and why the A and B excitons of MoS 2 unexpectedly exhibit minimal excitonic enhancement in both SHG and shift current generation.

36 MATERIALS SCIENCE↗
DOE OSTI2025

On the Interplay of Electronic and Lattice Screening on Exciton Binding in Two-Dimensional Lead Halide Perovskites

We use path integral Monte Carlo to study the energetics of excitons in layered, hybrid organic–inorganic perovskites in order to elucidate the relative contributions of dielectric confinement and electron–phonon coupling. While the dielectric mismatch between polar perovskite layers and nonpolar ligand layers significantly increases the exciton binding energy relative to their three-dimensional bulk crystal counterparts, formation of exciton polarons attenuates this effect. The contribution from polaron formation is found to be a nonmonotonic function of the lead halide layer thickness, which is clarified by a general variational theory. Accounting for both of these effects provides a description of exciton binding energies in good agreement with experimental measurements. By studying isolated layers and stacked layered crystals of various thicknesses, with ligands of varying polarity, we provide a systematic understanding of the excitonic behavior of this class of materials and how to engineer their photophysics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

pH-Mediated Colorimetric and Luminescent Sensing of Aqueous Nitrate Anions by a Platinum(II) Luminophore@Mesoporous Silica Composite

Increased levels of nitrate (NO 3 – ) in the environment can be detrimental to human health. Herein, we report a robust, cost-effective, and scalable, hybrid material-based colorimetric/luminescent sensor technology for rapid, selective, sensitive, and interference-free in situ NO 3 – detection. These hybrid materials are based on a square-planar platinum(II) salt [Pt(tpy)Cl]PF6 (tpy = 2,2';6',2''-terpyridine) supported on mesoporous silica. The platinum salt undergoes a vivid change in color and luminescence upon exposure to aqueous NO 3 – anions at pH ≤ 0 caused by substitution of the PF6– anions by aqueous NO 3 – . This change in photophysics of the platinum salt is induced by a rearrangement of its crystal lattice that leads to an extended Pt···Pt···Pt interaction, along with a concomitant change in its electronic structure. Furthermore, incorporating the material into mesoporous silica enhances the surface area and increases the detection sensitivity. A NO 3 – detection limit of 0.05 mM (3.1 ppm) is achieved, which is sufficiently lower than the ambient water quality limit of 0.16 mM (10 ppm) set by the United States Environmental Protection Agency. The colorimetric/luminescence of the hybrid material is highly selective to aqueous NO 3 – anions in the presence of other interfering anions, suggesting that this material is a promising candidate for the rapid NO 3 – detection and quantification in practical samples without separation, concentration, or other pretreatment steps.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Hydroporphyrin-Doped Near-Infrared-Emitting Polymer Dots for Cellular Fluorescence Imaging

We report Near-infrared (NIR) fluorescent semiconductor polymer dots (Pdots) have shown great potential for fluorescence imaging due to their exceptional chemical and photophysical properties. This paper describes the synthesis of NIR emitting Pdots with great control and tunability of emission peak wavelength. The Pdots were prepared by doping poly [(9,9-dioctylfluorenyl-2,7-diyl)-altco-(1,4-benzo-(2,1’,3)-thiadiazole)] (PFBT), a semiconducting polymer commonly used as a host polymer in luminescent Pdots, with a series of chlorins and bacteriochlorins with varying functional groups. Chlorins and bacteriochlorins are ideal dopants due to their high hydrophobicity, which precludes their use as molecular probes in aqueous biological media but on the other hand prevents their leakage when doped into Pdots. Additionally, chlorins and bacteriochlorins have narrow deep-red to NIR emission bands and the wide array of synthetic modifications available for modifying their molecular structure enables tuning their emission predictably and systematically. Transmission electron microscopy (TEM) and dynamic light scattering (DLS) measurements show the chlorin and bacteriochlorin-doped Pdots to be nearly spherical with an average diameter of 46±12 nm. Efficient energy transfer between PFBT and the doped chlorins or bacteriochlorins decreases the PFBT donor emission to near baseline level and increases the emission of the doped dyes that serve as acceptors. The chlorin and bacteriochlorindoped Pdots show narrow emission bands ranging from 640 nm to 820 nm depending on the doped dye. The paper demonstrates the utility of the systematic chlorin and bacteriochlorin synthesis approach by preparing Pdots of varying emission peak wavelength, utilizing them to visualize multiple targets using wide field fluorescence microscopy, binding them to secondary antibodies, and determining the binding of secondary antibody-conjugated Pdots to primary antibody-labeled receptors in plant cells. Additionally, the chlorin and bacteriochlorin doped Pdots show a blinking behavior that could enable their use in super resolution imaging methods like STORM.

13C-NMR↗
DOE OSTI2022

One-Step Ligand-Exchange Method to Produce Quantum Dot–DNA Conjugates for DNA-Directed Self-Assembly

To address the current challenges in making bright, stable, and small DNA-functionalized quantum dots (QDs), we have developed a one-step ligand-exchange method to produce QD–DNA conjugates from commonly available hydrophobic QDs. We show that by systematically adjusting the reaction conditions such as ligand-to-nanoparticle molar ratio, pH, and solvent composition, stable and highly photoluminescent water-soluble QD–DNA conjugates with relatively high ligand loadings can be produced. Moreover, by site specifically binding these QD–DNA conjugates to a DNA origami template, we demonstrate that these bioconjugates have sufficient colloidal stability for DNA-directed self-assembly. Fluorescence quenching by an adjacent gold nanoparticle (AuNP) was demonstrated. Such QD–AuNP dimers may serve as biosensors with improved sensitivity and reproducibility. Furthermore, our simple method can facilitate the assembly of QDs into more complex superlattices and discrete clusters that may enable novel photophysical properties.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2022

Tuning the Charge Transport Property and Photocatalytic Activity of Anthracene-Based 1D π–d Conjugated Coordination Polymers by Interlayer Stacking

One-dimensional (1D) π–d-conjugated coordination polymers (CCPs) with charge delocalization have attracted significant attention due to their potential application in energy conversion and storage. However, the fundamental understanding of the correlation of their structural parameters with photophysical and photocatalytic properties remains underexplored. Herein, we report three novel Cu-node anthracene-based 1D π–d CCPs with systematic variation of steric groups (Ph > Me > H) at the 9 and 10 position of anthracene (denoted as An Ph , An Me , and An H ), which is aimed at altering the stacking of the polymer chains and its impact on the inter-chain charge transport property. Here, by using the combination of steady-state X-ray absorption spectroscopy, optical transient absorption spectroscopy, X-ray transient absorption spectroscopy, and electrochemical impedance spectroscopy, we show that the linear ligands (An Ph , An Me , and An H ) with different degrees of steric groups (Ph > Me > H) introduced at the 9 and 10 position of anthracene can alter the stacking of the polymer chains and thus impact their crystallinity, charge separation, and charge transport property, which in turn impacts their photocatalytic performance for hydrogen evolution reaction.

1-D-polymer↗
DOE OSTI2023

Influence of Linker Identity on the Photochemistry of Uranyl-Organic Frameworks

While uranyl-based metal–organic frameworks (MOFs) boast impressive photocatalytic abilities, significant questions remain regarding their excitation pathways and methods to fine-tune their performance due to the lack of information regarding heterogeneous uranyl catalysis. Herein, we investigated how linker identity and photoexcitation impact uranyl photocatalysis when the uranyl coordination environment remains constant. Toward this end, we prepared three uranyl-based MOFs (NU-1301, NU-1307, and ZnTCPP-U2) and then examined the structural and photochemical properties of each through X-ray diffraction, X-ray absorption, and photoluminescence. We then correlated our observations to the photocatalytic performance for fluorination of cyclooctane. The excitation profile from NU-1301 and NU-1307 exhibited spin-forbidden linker transitions and uranyl vibronic progressions, with uranyl excitation and emission being most dominant in NU-1301. Consequently, NU-1301 was a more active photocatalyst than NU-1307. In contrast, the excitation profile from ZnTCPP-U2 contained transitions associated with the porphyrin linker exclusively. Photocatalytic activity from ZnTCPP-U2 significantly underperformed in comparison to that of the other two MOFs. Furthermore, these data suggest that linkers’ photophysical properties can be used to predict the photocatalytic behavior of uranyl-containing MOFs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

A Titanium-Based Metal–Organic Framework For Tandem Metallaphotocatalysis

Metal–organic frameworks (MOFs) have garnered substantial attention for their unique properties, such as high porosity and tunable structures, making them versatile for various applications. This paper constructs photoactive titanium–organic frameworks by combining Ti(IV) clusters and a bipyridine linker. The MOF is synthesized in situ through imine condensation, resulting in NU-2300. Subsequent ex situ nickel salt complexation results in NU-2300-Ni, which is then used for light-mediated carbon–heteroatom cross-couplings. The photophysical properties of the metallaphotocatalyst were investigated by UV-vis and EPR analysis, and both the Ti cluster and the bipyridine linker were found to contribute to successful catalysis, making it a tandem catalyst. The heterogeneous material retained its performance through five cycles of thioetherification. As a result, this work contributes not only to MOF synthetic strategies, but also to expanding MOF applications as recyclable, tandem metallaphotocatalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Unraveling the Mechanism of Interfacial Charge Transfer and Photoresponsivity of WS 2 Quantum Dots/MoS 2 (0D–2D) Heterostructure-Based Transistors

To assess the efficacy of a mixed-dimensional van der Waals (vdW) heterostructure in modulating the optoelectronic responses of nanodevices, the charge transport properties of the transition-metal dichalcogenide (TMD)-based heterostructure comprising zero-dimensional (0D) WS 2 quantum dots (QDs) and two-dimensional (2D) MoS 2 flakes are critically analyzed. Herein, a facile strategy was materialized in developing an atomically thin phototransistor assembled from mechanically exfoliated MoS 2 and WS 2 QDs synthesized using a one-pot hydrothermal route. The amalgamated photodetectors exhibited a high responsivity of ∼8000 A/W at an incident power of 0.05 nW of white light, surpassing that of the pristine MoS 2 devices. Furthermore, the detectivity of pristine MoS 2 , which was on the order of 10 10 , increased to 10 12 Jones for the WS 2 QDs/MoS 2 heterostructure photodetector, outperforming other WS 2 -based materials. The quasiparticle band gap and density of states (DOS) are further analyzed to elucidate the photophysics of the WS 2 QD/MoS 2 hybrid assembly. The difference in the work function between MoS 2 and WS 2 QDs gives rise to an electric field across the 0D–2D interface, facilitating effective charge separation and migration and contributing to the enhancement of photoresponsivity. The analysis of optical responses using density functional theory (DFT) revealed stronger absorption and less reflection over a broader spectrum of wavelengths for the heterostructure compared to the pristine materials. The estimated optical conductivity aligns well with the experimentally predicted maximum photoresponsivity under visible light, which is attributed to the high absorbance of 2D MoS 2 . In conclusion, combining diverse spectroscopic and imaging techniques with quantum simulation provides insights that clarify the pertinence of 0D–2D TMDs in designing phototransistors.

WS2 QDs/MoS2 heterostructure↗
DOE OSTI2026

Synergistic CuWO 4 /NiS 2 Binary Nanostructures for Efficient Photocatalytic Hydrogen Production

A viable and ecologically safe method for producing green hydrogen is photocatalytic hydrogen (H 2 ) production. However, the development of effective semiconductor materials with improved activity and long-term stability is still a major obstacle. Here, in this work, we report the development of a broadband-gap, UV light-responsive CuWO 4 /NiS 2 nanocomposite using simple hydrothermal and wet impregnation techniques. The hybrid systems, with photocatalytic presentation, were thoroughly assessed using spectroscopic, photophysical, and microscopic characterization methods. The optimized CuWO 4 /NiS 2 nanostructure demonstrated an impressive H 2 generation rate of 28.2 mmol h –1 g –1 under light irradiation, which is roughly 2.71 and 3.28 times greater than those of pristine CuWO 4 (10.4) and NiS 2 (8.6 mmol h -1 g (cat) -1 ), respectively. The enhanced presentation is ascribed to the synergetic interface between the coupled semiconductors, which facilitates the formation of a nanostructure. This arrangement inhibits electron–hole recombination and encourages effective charge carrier parting. Additionally, compared with pristine CuWO 4 and NiS 2 , respectively, the CuWO 4 /NiS 2 composite showed a noticeably greater photocurrent density. The developed nanostructured CuWO 4 /NiS 2 displayed a 28.6% quantum efficiency at 450 nm. These outcomes validate CuWO 4 /NiS 2 ’s significant aptitude as a non-noble-metal photocatalyst for the production of sustainable hydrogen.

CuWO4/NiS2↗
DOE OSTI2024

Trap States in Reduced Colloidal Titanium Dioxide Nanoparticles Have Different Proton Stoichiometries

Added electrons and holes in semiconducting (nano)materials typically occupy “trap states,” which often determine their photophysical properties and chemical reactivity. However, trap states are usually ill-defined, with few insights into their stoichiometry or structure. Our laboratory previously reported that aqueous colloidal TiO 2 nanoparticles prepared from TiCl 4 + H 2 O have two classes of electron trap states, termed Blue and Red. Herein, we show that the formation of Red from oxidized TiO 2 requires 1e – + 1H + , while Blue requires 1e – + 2H + . The two states are in a protic equilibrium, Blue ⇌ Red + H + , with K eq = 2.65 mM. The Blue states in the TiO 2 NPs behave just like a soluble molecular acid with this K eq as their K a , as supported by solvent isotope studies. Because the trap states have different compositions, their population and depopulation occur with the making and breaking of chemical bonds and not (as commonly assumed) just by the movement of electrons. In addition, the direct observation of a 2H + /1e – trap state contradicts the emerging H atom transfer (1H + /1e – ) paradigm for oxide/solution interfaces. Finally, this work emphasizes the importance of chemical stoichiometries, not just electronic energies, in understanding and directing the reactivity at solid/solution interfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Ultrafast Triplet Generation at the Lead Halide Perovskite/Rubrene Interface

Triplet sensitization of rubrene by bulk lead halide perovskites has recently resulted in efficient infrared-to-visible photon upconversion via triplet-triplet annihilation. Notably, this process can occur under solar relevant fluxes, potentially paving the way toward integration with photovoltaic devices. In order to further improve the upconversion efficiency, the fundamental photophysical pathways at the perovskite/rubrene interface must be clearly understood to maximize charge extraction. Here, we utilize ultrafast transient absorption spectroscopy to elucidate the processes underlying triplet generation at the perovskite/rubrene interface. In this work, our results point to a triplet generation mechanism based on hot carriers; thermally excited charge carriers in the perovskite cool more rapidly in the presence of rubrene, suggesting rapid extraction of these thermally excited carriers on the picosecond time scale. Subsequent triplet formation in rubrene is observed on a subnanosecond time scale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗