Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “performance study”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Data analysis study and performance evaluation of the scanning laser Doppler system

A simulation program which provided information on theoretically expected vortex spectra, evaluations of potential algorithms, and expected location accuracies for given scan patterns is presented. Field tests using an aircraft engine flow field and aircraft vortices during flyby tests were compared to the results of the simulation. From these studies, a vortex location algorithm was developed which provided vortex location for one or two vortices as a function of time. Results of this algorithm used on data from flyby tests were used to study vortex transport, to evaluate system performance, and to provide suggestions for real-time vortex location algorithms. The results of real-time analysis were compared to those which were expected based on theoretical considerations.

Sonnenschein, C. M.↗

Noise and performance calibration study of a Mach 2.2 supersonic cruise aircraft

The baseline configuration of a Mach 2.2 supersonic cruise concept employing a 1980 - 1985 technology level, dry turbojet, mechanically suppressed engine, was calibrated to identify differences in noise levels and performance as determined by the methodology and ground rules used. In addition, economic and noise information is provided consistent with a previous study based on an advanced technology Mach 2.7 configuration, reported separately. Results indicate that the difference between NASA and manufacturer performance methodology is small. Resizing the aircraft to NASA groundrules results in negligible changes in takeoff noise levels (less than 1 EPNdB) but approach noise is reduced by 5.3 EPNdB as a result of increasing approach speed. For the power setting chosen, engine oversizing resulted in no reduction in traded noise. In terms of summated noise level, a 6 EPNdB reduction is realized for a 5% increase in total operating costs.

Mascitti, V. R.↗

Performance improvement study of a relativistic magnetron using MAGIC-3D

A three dimensional particle-in-cell (PlC) code, MAGIC3D, is used to examine the performance improvement in a relativistic magnetron by perturbing technique. Asymmetrical metal rods of different length have been used to perturb the magnetic field in the annular sector of the resonant system. Enhancement up to 45% in the radiated output power has been obtained in the perturbed magnetic field case over the unperturbed one. It has also been found in the simulation that oscillation start up time is reduced by 16 %, and the amplitude of the nearest competing mode goes down 9dB compared to unperturbed case. Perturbed magnetic field also reduces the end caps current improving the efficiency. (author)

43 PARTICLE ACCELERATORS↗

Performance improvement study of a relativistic magnetron using MAGIC-3D

A three dimensional particle-in-cell (PlC) code, MAGIC3D, is used to examine the performance improvement in a relativistic magnetron by perturbing technique. Asymmetrical metal rods of different length have been used to perturb the magnetic field in the annular sector of the resonant system. Enhancement up to 45% in the radiated output power has been obtained in the perturbed magnetic field case over the unperturbed one. It has also been found in the simulation that oscillation start up time is reduced by 16 %, and the amplitude of the nearest competing mode goes down 9dB compared to unperturbed case. Perturbed magnetic field also reduces the end caps current improving the efficiency. (author)

43 PARTICLE ACCELERATORS↗

Vibration Performance Comparison Study on Current Fiber Optic Connector Technologies

Fiber optic cables are increasingly being used in harsh environments where they are subjected to vibration. Understanding the degradation in performance under these conditions is essential for integration of the fibers into the given application. System constraints oftentimes require fiber optic connectors so subsystems can be removed or assembled as needed. In the present work, various types of fiber optic connectors were monitored in-situ during vibration testing to examine the transient change in optical transmission and the steady-state variation following the event. Inspection of the fiber endfaces and connectors was performed at chosen intervals throughout the testing.

Ott, Melanie N.↗

WIPP WAC Equivalence Support Measurements for Low-Level Sludge Waste at Los Alamos National Laboratory - 12242

Los Alamos National Laboratory (LANL) uses the Nevada National Security Site (NNSS) as an off-site disposal facility for low-level waste (LLW), including sludge waste. NNSS has issued a position paper that indicates that systems that are not certified by the Carlsbad Field Office (CBFO) for Waste Isolation Pilot Plant (WIPP) disposal of Transuranic (TRU) waste must demonstrate equivalent practices to the CBFO certified systems in order to assign activity concentration values to assayed items without adding in the Total Measurement Uncertainty (TMU) when certifying waste for NNSS disposal. Efforts have been made to meet NNSS requirements to accept sludge waste for disposal at their facility. The LANL LLW Characterization Team uses portable high purity germanium (HPGe) detector systems for the nondestructive assay (NDA) of both debris and sludge LLW. A number of performance studies have been conducted historically by LANL to support the efficacy and quality of assay results generated by the LANL HPGe systems, and, while these detector systems are supported by these performance studies and used with LANL approved procedures and processes, they are not certified by CBFO for TRU waste disposal. Beginning in 2009, the LANL LLW Characterization Team undertook additional NDA measurements of both debris and sludge simulated waste containers to supplement existing studies and procedures to demonstrate full compliance with the NNSS position paper. Where possible, Performance Demonstration Project (PDP) drums were used for the waste matrix and PDP sources were used for the radioactive sources. Sludge drums are an example of a matrix with a uniform distribution of contaminants. When attempting to perform a gamma assay of a sludge drum, it is very important to adequately simulate this uniform distribution of radionuclides in order to accurately model the assay results. This was accomplished by using a spiral radial source tube placement in a sludge drum rather than the standard three source tubes seen in debris PDP drums. Available line sources (Eu-152) were placed in the spiral tubes to further accomplish the desired uniform distribution of radionuclides. The standard PDP drum (PDP matrix drum 005) and PDP sources were used to determine the lower limits of detection (LLD) and TMU. Analysis results for the sludge drum matrix case for two HPGe detectors were tabulated and evaluated. NNSS has accepted the methodology and results of the measurements towards demonstrating equivalence to CBFO certified systems. In conclusion, the WES-WGS and CMR-OPS gamma spectroscopy teams at LANL have defined and performed measurements that serve to establish and demonstrate equivalency with the processes used by CBFO certified NDA systems. The supplemental measurements address four key areas in Appendix A of DOE/WIPP-02-3122: Annual Calibration Confirmation and Performance Check measurements; LLD determination; and TMU definition. For these measurements the containers, matrices and activity loadings are selected to represent items being assayed in real LLW cases. The LLD and the TMU bounding measurements are to be performed one time and will not be required to be repeated in future campaigns. The annual calibration and performance check measurements were performed initially and planned to repeat in annual campaigns in order to maintain NNSS certification. PDP sources and a PDP sludge drum as well as Eu-152 line sources and a spiral sludge drum were used for the measurements. In all cases, the results for accuracy and precision (%R and %RSD, respectively) were within allowable ranges as defined by the WIPP PDP program. LLD (or MDC) results were established for all the ten WIPP reportable radionuclides and U-235, and the MDC for Pu-239 was established in all cases to be well under 100 nCi/g. Useful results for reducing estimated uncertainties were established and an interesting unexpected case of high bias was observed and will be applied toward this end. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

A Codesign Framework for Online Data Analysis and Reduction at the Exascale

In this paper we discuss our design of a toolset for automating performance studies of composed HPC applications that perform online data reduction and analysis. We describe Cheetah, a new framework for performing parametric studies on coupled applications. Cheetah facilitates understanding the impact of various factors such as process placement, synchronicity of algorithms, and storage vs. compute requirements for online analysis of large data. Ultimately, we aim to create a catalog of performance results that can help scientists understand tradeos when designing next-generation simulations that make use of online processing techniques. We illustrate the design choices of Cheetah by using a reaction-diusion simulation (Gray-Scott) paired with an analysis application to demonstrate initial results of fine-grained process placement on Summit, a pre-exascale supercomputer at Oak Ridge National Laboratory

Cheetah↗

Performance Sensitivity Studies on the PIAA Implementation of the High-Contrast Imaging Testbed

We have investigated the dependence of the High Contrast Imaging Testbed (HCIT) Phase Induced Amplitude Apodization (PIAA) coronagraph system performance on the rigid-body perturbations of various optics. The structural design of the optical system as well as the parameters of various optical elements used in the analysis are drawn from those of the PIAA/HCIT system that have been and will be implemented, and the simulation takes into account the surface errors of various optics. In this paper, we report our findings when the input light is a narrowband beam.

pupil mapping↗

Interface study and performance of large layer pair ultra-short period W/B{sub 4}C X-ray multilayer

The nature of interfaces in ultra short period W/B{sub 4}C multilayers (MLs) is studied using hard x-ray reflectivity and cross sectional transmission electron microscope. W/B{sub 4}C MLs are fabricated using magnetron sputtering system with systematic varying thickness of both W and B{sub 4}C layers from ∼5 to 30 Å keeping number of layer pairs fixed at 10. It is observed that in low period W/B{sub 4}C ML, as the layer thickness decreases, the interdiffusion plays a significant role because of the discontinuous nature of film. This gives variation of density and roughness of the layer as well as generates thickness errors in the ML structure due to volume changes which is originated by interdifusion process. Finally, W/B{sub 4}C MLs with large number of layer pairs (300) are fabricated with periodicity d= 20 Å which gives ∼54 % of reflectivity at energy 8.047 keV.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Experimental Investigation of Inhibitive Drilling Fluids Performance: Case Studies from United States Shale Basins

Shale formations are attractive prospects due to their potential in oil and gas production. Some of the largest shale formations in the mainland US, such as the Tuscaloosa Marine Shale (TMS), have reserves estimated to be around 7 billion barrels. Despite their huge potential, shale formations present major concerns for drilling operators. These prospects have unique challenges because of all their alteration and incompatibility issues with drilling and completion fluids. Most shale formations undergo numerous chemical and physical alterations, making their interaction with the drilling and completion fluid systems very complex to understand. In this study, a high-pressure, high-temperature (HPHT) drilling simulator was used to mimic real time drilling operations to investigate the performance of inhibitive drilling fluid systems in two major shale formations (Eagle Ford Shale and Tuscaloosa Marine Shale). A series of drilling experiments using the drilling simulator and clay swelling tests were conducted to evaluate the drilling performance of the KCl drilling fluid and cesium formate brine systems and their effectiveness in minimizing drilling concerns. Cylindrical cores were used to mimic vertical wellbores. It was found that the inhibitive muds systems (KCl and cesium formate) provided improved drilling performance compared to conventional fluid systems. Among the inhibitive systems, the cesium formate brine showed the best drilling performances due to its low swelling rate and improved drilling performance.

04 OIL SHALES AND TAR SANDS↗

Application of High Performance Computing for Studying Cyclic Variability in Dilute Internal Combustion Engines

Combustion instabilities in dilute internal combustion engines are manifest in cyclic variability (CV) in engine performance measures such as integrated heat release or shaft work. Understanding the factors leading to CV is important in model-based control, especially with high dilution where experimental studies have demonstrated that deterministic effects can become more prominent. Observation of enough consecutive engine cycles for significant statistical analysis is standard in experimental studies but is largely wanting in numerical simulations because of the computational time required to compute hundreds or thousands of consecutive cycles. We have proposed and begun implementation of an alternative approach to allow rapid simulation of long series of engine dynamics based on a low-dimensional mapping of ensembles of single-cycle simulations which map input parameters to output engine performance. This paper details the use Titan at the Oak Ridge Leadership Computing Facility to investigate CV in a gasoline direct-injected spark-ignited engine with a moderately high rate of dilution achieved through external exhaust gas recirculation. The CONVERGE™ CFD software was used to perform single-cycle simulations with imposed variations of operating parameters and boundary conditions selected according to a sparse grid sampling of the parameter space. Using an uncertainty quantification technique, the sampling scheme is chosen similar to a design of experiments grid but uses algorithms designed to minimize the number of samples required to achieve a desired degree of accuracy. The simulations map input parameters to output metrics of engine performance for a single cycle, and by mapping over a large parameter space, results can be interpolated from within that space. This interpolation scheme forms the basis for a low-dimensional ‘metamodel’ (or model of a model) which can be used to mimic the dynamical behavior of corresponding high-dimensional simulations. Simulations of high-EGR spark-ignition combustion cycles within a parametric sampling grid were performed and analyzed statistically, and sensitivities of the physical factors leading to high CV are presented. With these results, the prospect of producing low-dimensional metamodels to describe engine dynamics at any point in the parameter space will be discussed. Additionally, modifications to the methodology to account for nondeterministic effects in the numerical solution environment are proposed.

Finney, Charles E. A.↗

Tagging a smaller size class of fish: can it be done?

There is a new acoustic transmitter that is smaller than anything on the market and can be used to tag smaller fish than ever before. It is called the Eel-Lamprey Acoustic Tag (ELAT). Although the technology is ready to use, we cannot deploy it in the field until the biological proof of concept is tested in the lab. As such, we conducted two laboratory studies to evaluate the tag effects of surgical implantation in small (30–95 mm fork length [FL]) fry and smolt sized juvenile salmon. The first study was a survival, transmitter retention, and growth holding study and the second was a swimming performance study. Our goal was to identify a minimum size threshold for Chinook Salmon that can be implanted with an ELAT where survival, ELAT retention, growth, and swimming performance would not be affected compared to an untagged population. In the survival and growth study, fish were held for 50 days. At the end of the study we found that fish as small as 55 mm FL had a 95% survival rate. There was no difference in growth between tagged and untagged fish. The swimming performance study identified a minimum size threshold of 51 mm FL. This indicated the swimming performance of a tagged fish was not different from an untagged fish once the fish was 51 mm or longer. Using the results from the two laboratory studies, 55 mm FL was identified as a minimum size threshold where growth, survival, ELAT retention, and swimming performance were not affected compared to untagged fish. This research confirmed we can tag a smaller size class of fish and provided a minimum size threshold for use in tagging guidelines.

42 ENGINEERING↗

Solenoid valve performance characteristics studied

Current and voltage waveforms of a solenoid coil are recorded as the valve opens and closes. Analysis of the waveforms with respect to time and the phase of the valve cycle accurately describes valve performance.

Abe, J. T.↗

A thematic mapper performance optimization study

A six-month systems study of earth resource surveys from satellites was conducted in early 1974. Skylab S-192 Multispectral Scanner (MSS) data were used as a baseline to aid in evaluating the characteristics of future systems using satellite MSS sensors. The study took the viewpoint that overall system (sensor and processing) characteristics and parameter values should be determined largely by user requirements for automatic information extraction performance in quasi-operational earth resources surveys, the other major factor being hardware limitations imposed by state-of-the-art technology and cost.

Thomson, F. J.↗

First-passage time statistics on surfaces of general shape: Surface PDE solvers using Generalized Moving Least Squares (GMLS)

Here, we develop numerical methods for computing statistics of stochastic processes on surfaces of general shape with drift-diffusion dynamics d X t = a (X t ) dt + b(X t ) d W t . We formulate descriptions of Brownian motion and general drift-diffusion processes on surfaces. We consider statistics of the form u (x) = E x [$∫^{τ}_{0}$ g (X t ) dt ] + E x [ f (X τ )] for a domain Ω and the exit stopping time τ = inf t { t >0 | X i Ω}, where f , g are general smooth functions. For computing these statistics, we develop high-order Generalized Moving Least Squares (GMLS) solvers for associated surface PDE boundary-value problems based on Backward- Kolmogorov equations. We focus particularly on the mean First Passage Times (FPTs) given by the case f = 0, g = 1 where u (x) = E x [τ]. We perform studies for a variety of shapes showing our methods converge with high-order accuracy both in capturing the geometry and the surface PDE solutions. We then perform studies showing how statistics are influenced by the surface geometry, drift dynamics, and spatially dependent diffusivities.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Collaborative Research: Understanding Nanoparticle-Plasma Interactions in Dusty Non-Thermal Plasmas by Nanoparticle Probes and Online Aerosol Characterization (Final Technical Report)

This report describes results from the University of Minnesota’s contribution to studies performed under the award DE-SC0018202 (principal Investigator: Christopher J. Hogan Jr.. This award is a collaborative research grant with support equally provided to Case Western Reserve University and to the University of Illinois (with principal investigator R. Mohan Sankaran). To date ten peer-reviewed published papers have resulted from the studies performed with University of Minnesota personnel contributing; this report describes the results of these studies as well as several unpublished studies, grouped into seven separate study types. The overarching goal of the carried out studies was to understand nanoparticle behavior and dynamics in non-thermal plasma synthesis reactors, specifically adapting aerosol measurement technology to provide online measurements of particle size, charge, and structure in plasma reactor systems.

42 ENGINEERING↗