SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The Near Infrared Mapping Spectrometer performed spectral studies of Jupiter and the Galilean satellites during the June 1996 perijove pass of the Galileo spacecraft.
Abstract Sedimentary rocks are inherently anisotropic and prone to strain localization. While the influence of rock anisotropy on the brittle/dilative regime has been studied extensively, its influence on the ductile/compactive regime is much less explored. This paper discusses the anisotropic behavior of a high‐porosity carbonate rock from central Europe (the Maastricht Tuffeau). A set of triaxial tests with concurrent x‐ray tomography has been performed at different confining pressures. The anisotropic characteristics of this rock have been investigated by testing samples cored at different inclinations of the bedding, thus revealing non‐negligible effects of the coring direction on yielding and compaction behavior. Specifically, samples cored perpendicular to bedding display higher strength and longer stages of post‐yielding deformation before manifesting re‐hardening. Despite such alterations of the inelastic response, Digital Image Correlation has revealed that the strain localization mode is independent of the coring direction, thus being primarily affected by the confinement level. To capture the observed interaction between material anisotropy and compaction behavior at the continuum‐scale, an elastoplastic constitutive law has been proposed. For this purpose, a set of tensorial bases has been introduced to replicate how the oriented rock fabric modulates the yielding and plastic flow characteristics of the material. The analyses show that the impact of the coring direction on yield function and plastic flow rule is fundamentally different, thus requiring the use of distinct projection strategies (a strategy here defined heterotopic mapping). The performance of the model, studied through parametric analyses and by calibrating the experimental results, illustrates the improved capability of the proposed constitutive approach when applied to strongly anisotropic porous rocks.
Among current deep learning approaches for synthetic image generation, diffusion-based models stand out in terms of algorithmic stability and ability to retain high-fidelity image features with detailed resolution. Here, in this work, we employ Dreambooth, a method for fine-tuning Stable Diffusion, on X-ray CT images of microstructure of the polymer-bonded form (PBX) of a commonly used high explosive, Pentaerythritol tetranitrate (PETN), which yields generative models for creating synthetic PBX images. The models developed here represent five classes (or ‘lots’) of microstructures and demonstrate successful generation of images of each class with high fidelity, as verified by computed classification accuracy of ∼ 94% or higher. Data augmentation afforded by such image synthesis can be used to more reliably decipher underlying statistics, build processing-structure correlations, recognize off-normal structural anomalies, and identify age-related changes. Ideas related to converting image data into appropriate density mapping and performing mesoscale simulation or surrogate modeling of detonation are also discussed.
Complex solvent environments continue to limit the widespread adoption of organic solvent nanofiltration (OSN) in many chemical industry applications. In this paper we employ a commercially available covalent organic framework (COF), TpPa-1, and force field models to molecularly map separation performance of TpPa-1 membrane in mixed solvents. To minimize time and length scale mismatch between atomistic modeling and experiments, solvent permeance was normalized with water in modeling and experimental results to enable direct comparison. Model outputs, such as organic solvent permeance and solute rejection rate, matched well with filtration results. Since the atomistic models assume that all mass transfer is via through-pore transport, the discrepancies between modeling and experimental results provide insights on the effect of linear polymer defects, adsorption and interstitial mass transfer on polycrystalline COF membrane performance. In sum, force field models can serve as digital twins of COF membranes to simulate separation processes while capturing the effects of COF structure, chemistry, and crystallinity on membrane performance in complex organic solvent environments. Finally, this approach will provide insight into future COF design and synthesis for persisting separation challenges.
As protonic ceramic electrolysis cells emerge for efficient H 2 production, there is a need to develop air electrode materials enabling fast, durable steam splitting and proton incorporation. Single-phase triple conductors may fail to satisfy the myriad performance/stability requirements, and their critical charge-carriers (holes, oxygen vacancies, and protons) are in competition, limiting their concentrations. Instead, we propose task-sharing, vertically aligned nanocomposites (VANs), comprising a proton conductor (BaZr 0.9 Y 0.1 O 3-δ ) and a redox-active mixed ionic electronic conductor (Ce 0.9 Pr 0.1 O 2-δ ), that may enable rapid proton surface exchange at the solid–gas interface and transport along the solid–solid heterointerfaces. We grew VANs by pulsed laser deposition and investigated the interplay between their processing conditions, structure, and proton and oxygen surface exchange kinetics. We varied the substrate temperature, laser repetition rate, laser fluence, and processing oxygen pressure. The crystallinity and phases were characterized by grazing-incidence X-ray diffraction, and the strain and structural order as a function of depth were evaluated by angle-dependent synchrotron X-ray pair distribution function analysis. To evaluate the potential for interdiffusion, the formation energies of substitutional defects were simulated with density functional theory. Corresponding structural analysis and elemental mapping were performed by scanning/transmission electron microscopy, energy-dispersive X-ray spectroscopy, and electron energy-loss spectroscopy, indicating distinct nanoscale compositional regions with a hierarchical structure embedded in individual VANs columns and minimal interdiffusion across a bilayer film. Proton and oxygen surface exchange coefficients (k H , k O ) and polarization resistances were evaluated by electrical and optical relaxations and impedance spectroscopy of VAN-incorporated protonic ceramic electrochemical cells, respectively, at 400–500 °C, demonstrating values comparable to some of the best-known triple and mixed conductors.
Abstract Machine learning interatomic force fields are promising for combining high computational efficiency and accuracy in modeling quantum interactions and simulating atomistic dynamics. Active learning methods have been recently developed to train force fields efficiently and automatically. Among them, Bayesian active learning utilizes principled uncertainty quantification to make data acquisition decisions. In this work, we present a general Bayesian active learning workflow, where the force field is constructed from a sparse Gaussian process regression model based on atomic cluster expansion descriptors. To circumvent the high computational cost of the sparse Gaussian process uncertainty calculation, we formulate a high-performance approximate mapping of the uncertainty and demonstrate a speedup of several orders of magnitude. We demonstrate the autonomous active learning workflow by training a Bayesian force field model for silicon carbide (SiC) polymorphs in only a few days of computer time and show that pressure-induced phase transformations are accurately captured. The resulting model exhibits close agreement with both ab initio calculations and experimental measurements, and outperforms existing empirical models on vibrational and thermal properties. The active learning workflow readily generalizes to a wide range of material systems and accelerates their computational understanding.
The efficiency of multiple quantum well (QW) light emitting diodes (LEDs) to a large degree depends on uniformity of hole distribution between the QWs. Typically, transport between the QWs takes place via carrier capture into and thermionic emission out of the QWs. In InGaN/GaN QWs, the thermionic hole transport is hindered by the high quantum confinement and polarization barriers. To overcome this drawback, hole injection through semipolar QWs located at sidewalls of V-defects had been proposed. However, in the case of the V-defect injection, strong lateral emission variations take place. In this work, we explore the nature of these variations and the impact of the V-defects on the emission spectra and carrier dynamics. The study was performed by mapping electroluminescence (EL) and photoluminescence (PL) with a scanning near-field optical microscope in LEDs that contain a deeper well that can only be populated by holes through the V-defects. Applying different excitation schemes (electrical injection and optical excitation in the far- and near-field), we have shown that the EL intensity variations are caused by the lateral nonuniformity of the hole injection. We have also found that, in biased structures, the PL intensity and decay time in the V-defect regions are only moderately lower that in the V-defect-free regions thus showing no evidence of an efficient Shockley-–Read–Hall recombination. In the V-defect regions, the emission spectra experience a red shift and increased broadening, which suggests an increase of the In content and well width in the polar QWs close to the V-defects.
Determining how genetic polymorphisms enable certain fungi to persist in mammalian hosts can improve understanding of opportunistic fungal pathogenesis, a source of substantial human morbidity and mortality. We examined the genetic basis of fungal persistence in mice using a cross between a clinical isolate and the lab reference strain of the budding yeast Saccharomyces cerevisiae. Employing chromosomally encoded DNA barcodes, we tracked the relative abundances of 822 genotyped, haploid segregants in multiple organs over time and performed linkage mapping of their persistence in hosts. Detected loci showed a mix of general and antagonistically pleiotropic effects across organs. General loci showed similar effects across all organs, while antagonistically pleiotropic loci showed contrasting effects in the brain vs the kidneys, liver, and spleen. Persistence in an organ required both generally beneficial alleles and organ-appropriate pleiotropic alleles. This genetic architecture resulted in many segregants persisting in the brain or in nonbrain organs, but few segregants persisting in all organs. These results show complex combinations of genetic polymorphisms collectively cause and constrain fungal persistence in different parts of the mammalian body.
As the demand for more efficient SRF technology continues to rise, so does the need to improve the performance of Nb3Sn, the most promising alternative to niobium. Leveraging recent breakthroughs in Nb3Sn research from Cornell University and Fermilab, namely the electrochemical synthesis-based growth of Nb3Sn and the centrifugal barrel polishing (CBP) technique to smoothen the final Nb3Sn film, our primary goal is to reduce surface roughness while preserving the film’s quality. We present promising RF results from an electroplated cavity that underwent mechanical polishing using the CBP technique, which showed an increase in the maximum accelerating gradient compared to the baseline test. However, contamination-induced Q-slope limited performance. Temperature mapping reveals quench location and heating response before, during and after quench.
Commercial-scale production of Mo-99 demands a facility-wide assessment of radiation-induced degradation across process equipment, instrumentation, and purification media. Key factors— total ionizing dose, dose rate, radiolysis-driven chemistry, thermal loads, activation, and any neutron-related effects—should inform material selection, shielding, and component layout. Purification materials (sorbents, resins, filters, seals, housing) require particular attention to ensure that irradiation does not alter selectivity or capacity, generate fines, or introduce leachables that could compromise Mo-99 purity or downstream Tc-99m generator performance. Dose mapping, accelerated irradiation testing, and studies of extractables/leachables together provide the basis for setting maintenance, calibration, and replacement intervals and for qualifying materials that retain mechanical integrity, chemical compatibility, and radiopurity over their service life.
Compressor performance was mapped during the Brayton cycle power system testing. The range of testing included three shaft speeds: the design speed of 36,000 rpm, 10 percent overspeed (39,600 rpm), and 10 percent underspeed (32,400 rpm). A range of compressor inlet temperatures from 60 F to 120 F and discharge pressures from 20 to 45 psia were included. The effects of turbine inlet temperatures (from 1200 F to 1600 F) on the compressor were also studied. The data presented include plots of weight flow, compressor pressure ratio, efficiency, and temperature-rise ratio.
The Viking Project will launch two unmanned spacecraft to Mars in 1975 for scientific exploration with special emphasis on the search for life. Each spacecraft will consist of an orbiter and a lander. The landing site will be selected after the spacecraft is in orbit. Twelve investigations will be performed: three mapping experiments from the orbiter, one atmospheric experiment during the lander entry phase, seven analytical experiments on the surface of the planet, and one using the spacecraft radio and radar systems. The experiments on the surface will deal principally with biology, geology, and meteorology. Sixty-three scientists have been selected for the twelve teams.
The Viking Mission is a scientific exploration of the planet Mars with particular emphasis on the search for life. Two unmanned spacecraft will be launched from Cape Kennedy in 1975 and will arrive at Mars in the summer of 1976. Each spacecraft will consist of an orbiter and lander. The landing sites will be preselected before launch and certified by orbital reconnaissance before landing. Soft landing on the surface will be accomplished by decelerating first on an aeroshell, then a deployed parachute and finally using terminal propulsion engines. Thirteen investigations will be performed, including mapping experiments from the orbiter, and analytical experiments on the surface which deal broadly with the biology, geosciences and atmospheric characteristics of the planet.
The Viking Mission is a scientific exploration of the planet Mars with particular emphasis on the search for life. Two unmanned spacecraft will be launched from Cape Kennedy in 1975 and will arrive at Mars in the summer of 1976. Each spacecraft will consist of an orbiter and lander. The landing sites will be preselected before launch and certified by orbital reconnaissance before landing. Soft landing on the surface will be accomplished by decelerating first on an aeroshell, then a deployed parachute and finally using terminal propulsion engines. Thirteen investigations will be performed, including mapping experiments from the orbiter, and analytical experiments on the surface which deal broadly with the biology, geosciences and atmospheric characteristics of the planet.
The Earth Resources Technology Satellite, ERTS-1, provides an 18 day repetitive coverage capability and observations in the 0.8-1.1 micron spectral region where the contrast between water and adjacent surfaces is relatively large. Using these capabilities, observations in Virginia, Iowa, Missouri, and California have been acquired showing distinct patterns of flooding. Repetitive views of these areas before and after flooding have been examined, and flood mapping was performed. Sloughs in California can be seen to expand in terms of the area covered by standing water as time extends from summer to autumn. The results indicate that ERTS-1 imagery can be a valuable adjunct to conventional and aircraft survey methods for ascertaining the amount of area covered by water or affected by flooding.
This paper describes an approach to analyzing the manual flare and landing of an airplane. The basis of this approach is a mathematical model of the flare maneuver which is derived from manual landings of both real and simulated aircraft. This flare model in turn lends itself to a linear closed loop system description of the combined pilot/vehicle. Furthermore, simple Laplace transform methods can be used to map flare performance as functions of the flare maneuver. Having this link between flare maneuver and landing performance, we can estimate the pilot's ease in achieving desired levels of landing performance. Examples of this approach will be given using the results of a STOL airplane approach and landing simulation.
Efforts in support of a geomagnetic survey of the Brazilian area are described. Software to convert MAGSAT data tapes to the Burroughs/B-6700 binary format was developed and tested. A preliminary analysis of the first total intensity anomaly map was performed and methodologies for more intensive analysis were defined. The sources for correlative geological, aeromagnetic, and gravimetric data are described.