Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “performance improvement”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Challenges in Tracking Waste Reduction Performance Improvement in Manufacturing Plants

The recently released Circularity Gap Report 2023 by the Circle Economy Foundation states that the circularity score for the global economy is declining. The US Environmental Protection Agency (EPA) tracked municipal solid waste from 1960 to 2018 and found that 50% of the waste was destined for landfills. EPA estimates that US industry is responsible for 2.7 Gt of solid nonhazardous waste annually in the US mostly linear economy model. The circular economy framework aims to decouple economic value generation from the extraction of virgin materials from nature. The linear model of material extraction and disposal at the end of life is highly unsustainable. Manufacturing companies are adopting ambitious waste reduction targets to achieve sustainability. Through the Better Plants program, US DOE has established the Waste Reduction Network, which offers technical assistance to partners to achieve their ambitious waste reduction goals. Basic requirements of establishing a target include identifying a baseline, quantifying waste performance, and measuring progress over time. One problem faced by industry is unstandardized metrics for quantifying waste performance that may not be well suited to demonstrate progress. This paper studies traditional methods used to measure waste performance and highlights advantages, disadvantages, and limitations of each method. It also examines the suitability of applying the methods in different manufacturing circumstances. Finally, the paper presents a case study of a large manufacturer that faced inconsistencies in its tracked measurement metric. A solution was proposed and implemented to alter the methodology to enable more accurate waste performance tracking against a baseline.

circular economy↗

Improved Performance in FeF 2 Conversion Cathodes through Use of a Conductive 3D Scaffold and Al 2 O 3 ALD Coating

FeF 2 is considered a promising conversion compound for the positive electrode in lithium-ion batteries due to its high thermodynamic reduction potential (2.66 V vs Li/Li + ) and high theoretical specific capacity (571 mA h g -1 ). However, the sluggish reaction kinetics and rapid capacity decay caused by side reactions during cycling limit its practical application. Here, the fabrication of Ni-supported 3D Al 2 O 3 -coated FeF 2 electrodes is presented, and it is shown that these structured electrodes significantly overcome these limitations. The electrodes are prepared by iron electrodeposition on a Ni support, followed by a facile fluorination process and Al 2 O 3 coating by atomic layer deposition. The 3D FeF 2 electrode delivers an initial discharge capacity of 380 mA h g -1 at a current density of 200 mA g -1 at room temperature. The 3D scaffold improves the reaction kinetics and enables a high specific capacity by providing an efficient electron pathway to the insulating FeF 2 and short Li diffusion lengths. The Al 2 O 3 coating significantly improves the cycle life, probably by preventing side reactions through limiting direct electrode–electrolyte contact. The fabrication method presented here can also be applied for synthesis of other metal fluoride materials on different 3D conductive templates.

25 ENERGY STORAGE↗

Incremental performance improvements for a surface-convergency H- ion source

We discuss some of the interventions on LANSCE's surface-conversion negative-hydrogen ion sources to increase reliability; lifetime and output without any major re-design of the machine. LANSCE's source presently delivers a baseline 16 mA, 60 Hz, 12% duty factor beam. We describe how better quality control and processing of tungsten filaments allow the comfortable completion of 28-day run cycles, how improved temperature control of the ion source body yields an increased H{sup -} output, how higher input power through an additional filament allows operations at plasma densities while maintaining the filament lifetime and how adequate electrode biasing inside the source provide some control over the beam Twiss parameters on exit.

43 PARTICLE ACCELERATORS↗

Upcoversion performance improvement of NaYF{sub 4}:Yb, Er by Sn codoping: Enhanced emission intensity and reduced decay time

In this manuscript we report a phenomenon that upconversion emission intensity of Er{sup 3+} was enhanced while decay time constant was decreased obviously by Sn codoping with Yb/Er into hexagonal NaYF{sub 4} synchronously. X-ray powder diffiraction, field emission scanning electron microscope, transmission electron microscopy, X-ray photoelectron spectroscopy, electron spin-resonance spectroscopy and upconversion emission spectra were employed to explore the relation of crystal structure and properties. From these characterizations we found that symmetry of the rare earth ion local crystal field could be tuned by different Sn codoping concentration. For the variable valence property of Sn the local crystal field asymmetry and emission intensity of NaYF{sub 4}:Yb, Er arrived to the maximum when 3 mol% Sn was codoped, while decay time was reduced. The study of this changing tends of upconversion emission intensity and decay time constant may be helpful for design and fabrication of high performance upconversion materials. - Graphical abstract: Variable-valenced Sn is introduced with Yb/Er into NaFY{sub 4} to tune structure and local crystal field. Upconversion emission intensity of Er{sup 3+} was enhanced while decay time constant was decreased. Display Omitted - Highlights: • NaYF{sub 4}: Yb, Er was codoped with different concentration Sn. • Upconversion emission intensity was enhanced while decay time constant was decreased. • Introduction of variable-valenced Sn is effective to tune structure and crystal field of NaFY{sub 4}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A facile method to synthesize carbon coated Li{sub 1.2}Ni{sub 0.2}Mn{sub 0.6}O{sub 2} with improved performance

Graphical abstract: Li{sub 1.2}Ni{sub 0.2}Mn{sub 0.6}O{sub 2} powders are synthesized and then coated by decomposed carbon. The discharge capacity of carbon-coated cathode at 0.1 and 5 C are 246 and 125 mAhg{sup −1}, while those of ball-milled cathode are 222 and 49 mAhg{sup −1}. - Highlights: • A simple method was applied to synthesize carbon-coated Li{sub 1.2}Ni{sub 0.2}Mn{sub 0.6}O{sub 2}. • The discharge capacities of carbon-coated sample at 0.1 and 5.0 C rates are 246 and 125 mAh/g. • Capacity retention of carbon-coated electrode after 50 cycles is 97.5%. - Abstract: Carbon-coated Li{sub 1.2}Ni{sub 0.2}Mn{sub 0.6}O{sub 2} powders have been synthesized with Bakelite and heat process in air. The effect of carbon coating on the physical and electrochemical properties have been discussed through the characterizations of X-ray diffraction (XRD), scanning electron microscopy (SEM), electrochemical impedance spectroscopy (EIS), discharge and rate tests. The carbon-coated cathode exhibits much improved first discharge capacity and rate capability than the pristine sample. The discharge capacity at 0.1 and 5.0 C rates are 246 and 125 mAhg{sup −1}, while that of pristine are only about 222 and 49 mAhg{sup −1}, respectively. The capacity retention of Li{sub 1.2}Ni{sub 0.2}Mn{sub 0.6}O{sub 2} electrode after 50 cycles is improved from 89.8 to 97.5% after carbon coating. EIS results indicate that R{sub ct} of Li{sub 1.2}Ni{sub 0.2}Mn{sub 0.6}O{sub 2} electrode is decreased from 62 to 37 Ω after carbon coating.

36 MATERIALS SCIENCE↗

Hybrid structure of polyaniline/ZnO nanograss and its application in dye-sensitized solar cell with performance improvement

Polyaniline (PANI) hybridized ZnO photoanode for dye-sensitized solar cell (DSSC) was primarily prepared via a two-step process which involved hydrothermal growth of ZnO nanograss on the fluorine-doped tin oxide (FTO) substrate and subsequently chemisorption of PANI on the surfaces of the ZnO nanorods. The PANI hybridized ZnO nanograss films were characterized by scanning electron microscope (SEM), X-ray diffraction (XRD) and Fourier transform infrared spectra (FT-IR), and the results indicated that there were chemical interactions between PANI and ZnO. Both pure ZnO nanograss and PANI hybridized ZnO nanograss were applied to DSSC. The results of photoelectrochemical measurement showed that the photocurrent density of PANI (100 mg/L) hybridized ZnO nanograss photoanode was significantly enhanced, and the overall light-conversion efficiency increased by 60%. The electrochemical impedance spectra (EIS) displayed that the electron densities in photoanodes of PANI hybridized ZnO nanograss were larger than that in pure ZnO nanograss. This is ascribed to more effective charge separation and faster interfacial charge transferring occurred in the hybrid photoanode. - Graphical abstract: Operational principle of the DSSC: the introduced hybridizing PANI layer performs effective charge separation and faster interfacial charge transferring. Highlights: Black-Right-Pointing-Pointer PANI/ZnO nanograss hybrid materials as photoanode in Dye-sensitized solar cell. Black-Right-Pointing-Pointer Photoelectric conversion efficiency after hybridization was enhanced by 60%. Black-Right-Pointing-Pointer PANI hybridizing ZnO nanograss induced a rapid charge separation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Challenges in Tracking Waste Reduction Performance Improvement in Manufacturing Plants

The recently released Circularity Gap Report 2023 by Circle Economy Foundation found that the circularity score for the global economy is declining. This indicates that material extraction from virgin sources is climbing over earlier years. As per data released by US Geological Survey, material use in the US economy has increased exponentially with the expanding US economy over last century. EPA tracked municipal solid waste from 1960 to 2018 and found that 50% of the waste is destined for landfills. EPA estimates that US industry is responsible for 2.7 billion ton of solid non-hazardous waste annually in our mostly linear economy model. The circular economy framework aims at decoupling economic value generation from virgin materials extraction from nature. The linear model of material extraction and disposal at end of life is highly unsustainable. Manufacturing companies have realized this and in their commitments to sustainability are adopting ambitious waste reduction targets. Through Better Plants program US Department of Energy has established Waste Reduction Network where it is offering technical assistance to partners to achieve these ambitious waste reduction goals. Basic requirements of establishing a target include identifying a baseline, quantifying waste performance, and measuring progress over time. One problem faced by industry is the unstandardized metrics to quantify waste performance that may not be well suited to demonstrate progress. In this paper, we research methods traditionally used to measure waste performance and highlight advantages, gaps and limitations of each method. Suitability of the methods applicable to different manufacturing circumstances are also examined. Finally, we present a case study of a large manufacturer that faced inconsistencies in their tracked measurement metric. A solution was proposed to alter the methodology to enable more accurate waste performance tracking against a baseline.

Chaudhari, Subodh↗

Data Assimilation Needs for RR Performance Improvement

IRSN, being the French public body (TSO), is responsible for providing the public authorities with reference expertise and independent data on nuclear safety, security, nuclear material accounting, and protection of people and environment against ionizing radiation. At the same time it conducts a vast range of scientific studies in order to elaborate the safety rules, risk assessment methodology and to develop the competencies in the fields related to nuclear safety and radiation protection. Understanding that in general risks are driven by different kinds of uncertainties; including physically driven, external conditions and even human behavior. The uncertainties quantification and, therefore, an accuracy establishment are of interest for the different reasons. However certain unexpected benefits could be obtained using firmly calibrated high fidelity tools. One of the examples we are discussing hereinafter. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Performance improvement of gadolinium oxide resistive random access memory treated by hydrogen plasma immersion ion implantation

Characteristics improvement of gadolinium oxide (Gd{sub x}O{sub y}) resistive random access memories (RRAMs) treated by hydrogen plasma immersion ion implantation (PIII) was investigated. With the hydrogen PIII treatment, the Gd{sub x}O{sub y} RRAMs exhibited low set/reset voltages and a high resistance ratio, which were attributed to the enhanced movement of oxygen ions within the Gd{sub x}O{sub y} films and the increased Schottky barrier height at Pt/Gd{sub x}O{sub y} interface, respectively. The resistive switching mechanism of Gd{sub x}O{sub y} RRAMs was dominated by Schottky emission, as proved by the area dependence of the resistance in the low resistance state. After the hydrogen PIII treatment, a retention time of more than 10{sup 4} s was achieved at an elevated measurement temperature. In addition, a stable cycling endurance with the resistance ratio of more than three orders of magnitude of the Gd{sub x}O{sub y} RRAMs can be obtained.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Sequential Deposition of Organic Films with Eco‐Compatible Solvents Improves Performance and Enables Over 12%‐Efficiency Nonfullerene Solar Cells

Abstract Casting of a donor:acceptor bulk‐heterojunction structure from a single ink has been the predominant fabrication method of organic photovoltaics (OPVs). Despite the success of such bulk heterojunctions, the task ofcontrolling the microstructure in a single casting process has been arduous and alternative approaches are desired. To achieve OPVs with a desirable microstructure, a facile and eco‐compatible sequential deposition approach is demonstrated for polymer/small‐molecule pairs. Using a nominally amorphous polymer as the model material, the profound influence of casting solvent is shown on the molecular ordering of the film, and thus the device performance and mesoscale morphology of sequentially deposited OPVs can be tuned. Static and in situ X‐ray scattering indicate that applying (R)‐(+)‐limonene is able to greatly promote the molecular order of weakly crystalline polymers and form the largest domain spacing exclusively, which correlates well with the best efficiency of 12.5% in sequentially deposited devices. The sequentially cast device generally outperforms its control device based on traditional single‐ink bulk‐heterojunction structure. More crucially, a simple polymer:solvent interaction parameter χ is positively correlated with domain spacing in these sequentially deposited devices. These findings shed light on innovative approaches to rationally create environmentally friendly and highly efficient electronics.

Ye, Long↗