SEARCH · Engineering Papers

Results for “numerical integration”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

All sources NASA NTRS DOE OSTI

DOE OSTI2024

A numerical study of process complexity in permafrost dominated regions

Numerical modeling of permafrost dynamics requires adequate representation of atmospheric and surface processes, a reasonable parameter estimation strategy, and site-specific model development. The three main research objectives of the study are: (i) to propose a novel methodology that determines the required level of surface process complexity of permafrost models by conducting parameter sensitivity and calibration, (ii) to design and compare three numerical models of increasing surface process complexity, and (iii) to calibrate and validate the numerical models at the Yakou catchment on the Qinghai-Tibet Plateau as an exemplary study site. The calibration was carried out by coupling the Advanced Terrestrial Simulator (numerical model) and PEST (calibration tool). Simulation results showed that (i) A simple numerical model that considers only subsurface processes can simulate active layer development with the same accuracy as other more complex models that include surface processes. (ii) Peat and mineral soil layer permeability, Van Genuchten alpha, and porosity are highly sensitive. (iii) Liquid precipitation aids in increasing the rate of permafrost degradation. (iv) Deposition of snow insulated the subsurface during the thaw initiation period. We have developed and released an integrated code that couples the numerical software ATS to the calibration software PEST. The numerical model can be further used to determine the impacts of climate change on permafrost degradation.

Calibration↗

DOE OSTI2021

Differentiating densities on smooth manifolds

Lebesgue integration of derivatives of strongly-oscillatory functions is a recurring challenge in computational science and engineering. Integration by parts is an effective remedy for huge computational costs associated with Monte Carlo integration schemes. In case of Lebesgue integrals over a smooth manifold, however, integration by parts gives rise to a derivative of the density implied by charts describing the domain manifold. This paper focuses on the computation of that derivative, which we call the density gradient function, on general smooth manifolds. We analytically derive formulas for the density gradient and present examples of manifolds determined by popular differential equation-driven systems. Furthermore, we highlight the significance of the density gradient by demonstrating a numerical example of Monte Carlo integration involving oscillatory integrands.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2020

Physics and applications of quantum dot lasers for silicon photonics

Abstract Photonic integrated circuits (PICs) have enabled numerous high performance, energy efficient, and compact technologies for optical communications, sensing, and metrology. One of the biggest challenges in scaling PICs comes from the parasitic reflections that feed light back into the laser source. These reflections increase noise and may cause laser destabilization. To avoid parasitic reflections, expensive and bulky optical isolators have been placed between the laser and the rest of the PIC leading to large increases in device footprint for on-chip integration schemes and significant increases in packaging complexity and cost for lasers co-packaged with passive PICs. This review article reports new findings on epitaxial quantum dot lasers on silicon and studies both theoretically and experimentally the connection between the material properties and the ultra-low reflection sensitivity that is achieved. Our results show that such quantum dot lasers on silicon exhibit much lower linewidth enhancement factors than any quantum well lasers. Together with the large damping factor, we show that the quantum dot gain medium is fundamentally dependent on dot uniformity, but through careful optimization, even epitaxial lasers on silicon can operate without an optical isolator, which is of paramount importance for the future high-speed silicon photonic systems.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Integral X-ray diffuse scattering for studying irradiation-induced dislocation loops in single crystals

Numerical diffuse scattering cross-section calculations are used to establish a rigorous basis for determining the concentration and size distribution of dislocation loops in irradiated single crystals from integral X-ray diffuse scattering (XRDS) measurements. Differential XRDS intensities for prismatic {111} type dislocation loops are numerically calculated as a function of loop radius R and wavevectors q relative to Bragg reflections in tungsten. The results show the well known 1/q 2 Huang scattering form at small q that transitions to a ∼1/q 4 dependence associated with the Stokes–Wilson approximation for q ≳ 1/R. More importantly, they show further that the 1/q 4 falloff is not the asymptotic large-q form of the diffuse scattering for small loops (R < 200 Å) as has often been assumed. Rather, for loop sizes as small as R ≃ 5 Å with strong curvature, the calculations show definitively that the scattering transitions to a robust 1/q 5 falloff at larger q that arises due to the local strains near the dislocation core defining the circumference of the dislocation loops. The presence of this 1/q 5 asymptotic form for both small and large loops is experimentally confirmed using an integral XRDS measurement around the 110 reflection on self-ion-irradiated tungsten combined with numerically calculated integral XRDS cross-sections. Accordingly, the historical two-region theoretical treatment of the cross-sections for integral XRDS is extended to a three-region model that has direct sensitivity to the (first-moment) dislocation line lengths of dislocation loops. In conclusion, these developments enable the use of both numerical and analytically modeled cross-sections to make accurate integral XRDS determinations of dislocation loop sizes and concentrations using modest-intensity laboratory X-ray sources.

42 ENGINEERING↗

DOE OSTI2024

Direct solution of Minkowski-space Bethe-Salpeter equation in the massive Wick-Cutkosky model

Here in order to solve the Bethe-Salpeter equation (BSE) in the Minkowski space, we first introduce the Nakanishi integral representations of the Bethe-Salpeter amplitude and the Bethe-Salpeter wave function. We then derive the explicit integral equations for the corresponding spectral functions from the BSE for states of two scalar particles bound by a scalar-particle exchange interaction, where the propagators of constituents are allowed to be fully dressed. These integral equations are subsequently solved numerically in the variation of the Wick-Cutkosky model with massive exchange particles, where an algorithm of adaptive mash grid is proposed. The equations and algorithm we develop here serve as the foundation of Minkowski-space formulation of BSE for bound states of fermions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2026

Coordinated Natural Gas and Electric Planning: Case Studies of Current Approaches and Practices

This paper examines how natural gas and electric utilities across eight U.S. states and two Canadian provinces are beginning to coordinate historically separate planning processes in response to growing system interdependencies, policy mandates, aging infrastructure, and changing customer energy choices. Electricity planning has long relied on robust integrated resource planning frameworks that weigh numerous objectives, risks, and costs. Natural gas planning, on the other hand, is typically less transparent and more narrowly focused on safety and system integrity. As economic, reliability, and policy drivers place new and shared demands on both systems, jurisdictions and utilities are experimenting with approaches such as coordinated forecasting, non pipeline alternatives, and combined planning pilots. A few have issued regulatory or statutory directives for greater data sharing and methodological alignment. Case studies from British Columbia, California, Colorado, Illinois, Massachusetts, Minnesota, New York, Québec, Rhode Island, and Washington illustrate a wide range of approaches to rethinking siloed planning. The paper identifies several common themes across the jurisdictions examined. It provides observations on the methods, processes, and organizational steps that may be needed in the future to address the challenges being faced by states and utilities. Lastly, it identifies some initial steps that states and utilities can consider if they would like to pursue more integrated, cost-effective, policy-aligned energy system planning.

03 NATURAL GAS↗

DOE OSTI2022

An extrapolation method for strain ranges and hold times in developing the EPP+SMT creep-fatigue design curves for Alloy 617

Experimental and numerical studies in developing the integrated Elastic–Perfectly Plastic (EPP) plus Simplified Model Test (SMT) design methodology, referred to as the EPP+SMT method, continued in FY2022. This report focuses on the methods for extrapolating the EPP+SMT creep-fatigue (CF) design curves at long hold times and low strain ranges. In this study, the available CF failure data on Alloy 617 at 950°C were analyzed to determine a set of CF failure criteria. At very low strain ranges and long hold times, CF failure data are not accessible by experiments because of the extraordinarily long test durations and the inability of the test machines to accurately control these small strain ranges. A CF experimental approach with the concept of block-strain range CF testing protocol was developed. Tests using this protocol were conducted to generate the needed information for calibrating material parameters of the numerical material models. The Time Fraction based method and Dissipated Energy method were used to extrapolate the CF life curves to low strain ranges and long hold times. Based on the new experimental approach and CF life prediction methods, the CF life curves with various hold times were developed for Alloy 617 at 950°C. In addition, an experiment was designed and is being performed to verify the predicted CF curves at 950°C. The extrapolation procedure will be applied at lower temperatures to complete the development of the EPP+SMT CF design curves for Alloy 617 in F2023.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Sphere and disk partition functions in Liouville and in matrix integrals

We compute the sphere and disk partition functions in semiclassical Liouville and analogous quantities in double-scaled matrix integrals. The quantity sphere/disk2 is unambiguous and we find a precise numerical match between the Liouville answer and the matrix integral answer. An application is to show that the sphere partition function in JT gravity is infinite.

2D Gravity↗

DOE OSTI2026

Actinium–DOTA coordination in water from hybrid ML/MM: Structure, free energies, and water-exchange pathways

Quantitative simulation of trivalent ƒ-block chelates in water remains challenging because bonded and non-bonded force-field models make different approximations for coordination structure, exchange dynamics, and ion–ligand interactions in highly charged systems. Here, we develop a hybrid machine-learning/molecular-mechanics (ML/MM) framework for Ac 3+ –DOTA in explicit solvent by training an E(3)-equivariant neural network potential (MACELES) on mechanically embedded QM/MM data for Ac aquo and Ac–DOTA species and coupling it to NAMD 2.14 with particle-mesh Ewald electrostatics. Nanosecond ML/MM trajectories remain numerically stable and preserve chelate integrity, yielding a compact DOTA inner shell with an inner-sphere water coordination number of CN Ac,O w ≈ 1.7 arising from a dynamic equilibrium between one- and two-water states (37.5% and 59.9% of frames; three waters 2.5%). A 5 ns potential of mean force shows two low-lying basins at CN Ac,O w ≈ 1 and CN Ac,O w ≈ 2. DFT end-state free energies are consistent with the ML/MM profile, and DFT minimum-energy paths provide a qualitative electronic-structure reference for the observed basin connectivity. State-resolved kinetics reveal picosecond water-exchange pathways that couple hydration changes to transient DOTA arm fluctuations, and training-set comparisons show that temperature-matched Ac–DOTA data optimize energy/force accuracy while more diverse solvated data improve charge prediction. Overall, the present hybrid ML/MM model provides a practical description of Ac 3+ –DOTA hydration thermodynamics and short-time exchange behavior in explicit water at MD-like cost.

Actinium↗

DOE OSTI2022

Well–based monitoring of CO 2 geological sequestration operations in saline aquifers: Critical insights into key questions

Geological carbon sequestration in saline aquifers is one of the most promising strategies to help mitigate emissions of CO 2 to the atmosphere. Significant challenges in ensuring the security of the sequestration process rest in the evolution and expansion of the CO 2 plume in the subsurface. The ability to track the movement of the injected CO 2 poses another challenge. Critical questions related to the integrity of the sequestration operations in saline aquifers relate to plume characteristics that can we monitor using well-based variables. We addressed this and related questions using an integrated modeling framework through a numerical investigation of carbon sequestration in saline aquifers during long-term and post-injection periods. This modeling paradigm incorporates the effect of structural, geological, and petrophysical characteristics. That way, we can account for critical physicochemical processes, rock-fluid interactions, and lithology dependencies. The well fluid variables investigated include fluid composition, pH, fluid density, and ion activity. We learned that fluid property analytics and diagnostics can be powerful tools to estimate the movement of CO 2 and its storage in different trapping mechanisms. These analytics can help optimize operational aspects and simplify reservoir-scale models while still reflecting the complex nature of the CO 2 interactions underground and offering insights into plume evolution.

58 GEOSCIENCES↗

DOE OSTI2024

Modeling stimulated Brillouin backscatter from outer-cone quads across multiple inertial confinement fusion hohlraum designs

Stimulated Brillouin scattering (SBS) is a potential risk for laser damage in the experiments carried out at the National Ignition Facility (NIF), and by altering the energy deposition pattern in hohlraums, it affects the symmetry of indirect-drive inertial confinement fusion implosions. We have surveyed backward SBS on outer-cone quads across NIF integrated hohlraums of various platforms numerically, using three-dimensional (3D) simulations with the backscatter code pF3D [Berger et al. Phys. Plasmas 5, 4337 (1998)] and ray-based gain calculations. Simulated reflected powers and energies, as well as the spectrum of reflected light all compare favorably with measurements. Ray-based calculations of exponential SBS amplification (“gain”), which assume a strongly damped plasma wave and steady-state response, are performed using a novel method that includes the 3D speckled field of the laser that drives SBS. This approach is useful for understanding qualitative differences between hohlraum designs and identifying regions susceptible to SBS within hohlraums. Quantitatively, gains are not found to correlate with SBS reflectivities in 3D, necessitating fully wave-based calculations that naturally include diffraction and various temporal dependencies.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2020

Logical gates embedding in artificial spin ice

The realization and study of arrays of interacting magnetic nanoislands, such as artificial spin ices, have reached mature levels of control that allow design and demonstration of exotic, collective behaviors not seen in natural materials. Advances in the direct manipulation of their local, binary moments also suggest a use as nanopatterned, interacting memory media, for computation within a magnetic memory. Recent experimental work has demonstrated the possibility of building logic gates from clusters of interacting magnetic domains, and yet the possibility of large scale integration of such gates can prove problematic even at the theoretical level. Here we introduce theoretically complete sets of logical gates, in principle realizable in an experiment, and we study the feasibility of their integration into tree-like circuits. By evaluating the fidelity control parameter between their collective behavior and their expected logic functionality we determine conditions for integration. Also, we test our numerical results against the presence of disorder in the couplings, showing that the design gate structure is robust to small coupling perturbations, and thus possibly to small imperfections in the fabrication of the islands.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2024

Approximating accelerator impedances with resonator networks

It is common in the accelerator community to use the impedance of accelerator components to describe wake interactions in the frequency domain. However, it is often desirable to understand such wake interactions in the time domain in a general manner for excitations that are not necessarily Gaussian in nature. Here, the conventional method for doing this involves taking the inverse Fourier Transform of the component impedance, obtaining the Green's Function, and then convolving it with the desired excitation distribution. This method can prove numerically cumbersome, for a convolution integral must be evaluated for each individual point in time when the wake function is desired. An alternative to this method would be to compute the wake function analytically, which would sidestep the need for repetitive integration. Only a handful of cases, however, are simple enough for this method to be tenable. One of these cases is the case where the component in question is an RLC resonator, which has a closed-form analytical wake function solution. This means that a component which can be represented in terms of resonators can leverage this solution. As it happens, common network synthesis techniques may be used to map arbitrary impedance profiles to RLC resonator networks in a manner the accelerator community has yet to take advantage of. In this work, we will use Foster Canonical Resonator Networks and partial derivative descent optimization to develop a technique for synthesizing resonator networks that well approximate the impedances of real-world accelerator components. We will link this synthesis to the closed-form resonator wake function solution, giving rise to a powerful workflow that may be used to streamline beam dynamics simulations.

43 PARTICLE ACCELERATORS↗

DOE OSTI2020

GauXC v0.1.0

GauXC is a modern, modular C++ library for the numerical exchange-correlation (XC) integration required for the Gaussian basis set discretization of Kohn-Sham density functional theory (DFT). The modular nature of GauXC allows for an extensible software design which enables performance portability on an array of CPU and GPU architectures.

Williams-Young, David↗

DOE OSTI2021

Absorptive corrections to the forward elastic proton-proton analyzing power A N

In the RHIC Polarized Atomic Hydrogen Gas Jet Target (HJET) measurements of the protonproton analyzing power A N (t), absorptive corrections to the electromagnetic form factor were not considered in the data analysis. Recently, these corrections were evaluated theoretically. However, the results were presented in form of integral expressions which were calculated numerically. In this note, the expressions are simplified to make them more suitable for the HJET data analysis. Possible effect of the absorptive corrections in the A N (t) measurement is discussed.

43 PARTICLE ACCELERATORS↗

DOE OSTI2022

Loop Thermosyphon Enhanced Solar Collector

A two-phase loop thermosyphon solar collector was developed to transfer thermal energy efficiently and passively from a concentrated solar collector to a thermal desalination process. The two-phase flow in the loop thermosyphon is driven by a difference in gravitational pressure head between the liquid return line and the two-phase riser located between the evaporator and condenser. A numerical model incorporating mass, energy, and pressure drop balances was developed to predict system performance and use as a design tool. Three iterations of loop thermosyphon solar collectors were designed, fabricated, and tested to validate the numerical analysis and demonstrate system integration. Additionally, a novel solar receiver design was evaluated based on volumetric absorption of the concentrated sunlight by an optically absorptive two-phase working fluid. Life tests were performed to evaluate the working fluid thermal stability and resistance to ultraviolet degradation. A glass receiver tube and associated glass-to-metal junctions were developed. Finally, a full-scale loop thermosyphon was integrated with a parabolic trough solar collector and tested on-sun.

14 SOLAR ENERGY↗

DOE OSTI2023

Theory and Implementation of the Spectacular Nonlinear Viscoelastic Constitutive Model

This report is a comprehensive guide to the nonlinear viscoelastic Spectacular model, which is an isotropic, thermo-rheologically simple constitutive model for glass-forming materials, such as amorphous polymers. Spectacular is intermediate in complexity to the previous PEC and SPEC models (Potential Energy Clock and Simplified Potential Energy Clock models, respectively). The model form consists of two parts: a Helmholtz free energy functional and a nonlinear material clock that controls the rate of viscoelastic relaxation. The Helmholtz free energy is derived from a series expansion about a reference state. Expressions for the stress and entropy functionals are derived from the Helmholtz free energy following the Rational Mechanics approach. The material clock depends on a simplified expression for the potential energy, which itself is a functional of the temperature and strain histories. This report describes the thermo-mechanical theory of Spectacular, the numerical methods for time-integrating the model, model verification for its implementation in LAMÉ, a user guide for its implementation in LAMÉ, and ideas for future work. A number of appendices provide supplementary mathematical details and a description of the procedure used to derive the simplified potential energy from the full expression for the potential energy. The goal of this report is create a convenient point-of-entry for engineers who wish to learn more about Spectacular, but also to serve as a reference manual for advanced users of the model.

36 MATERIALS SCIENCE↗

DOE OSTI2025

WEIS and FAST.Farm Advancements Beyond Wind Turbine Aeroelasticity

Presentation at the 7th Wind Energy Systems Engineering workshop from NREL principal engineer Jason Jonkman, Ph.D., on NREL's numerical tools Wind Energy with Integrated Servo-control (WEIS), which focuses on the integrated design of floating wind turbines, and FAST.Farm, a simulation tool for multi-turbine wind farms based on popular aero-servo-hydro-elastic solver OpenFAST. The presentation discusses recent advancements beyond wind turbine aero-elasticity.

17 WIND ENERGY↗