Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “nitrogen complexes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Temporal nitrogen dynamics in intensively managed loblolly pine early stand development

Forest production is strongly dependent on nutrient uptake; however, sustainable management of intensively managed plantations requires an improved understanding of this relationship when fertilization occurs frequently across short rotations. Here, we studied temporal nitrogen (N) concentration ([N]) and content (Nc) dynamics under different silvicultural practices (herbicide, fertilization, and planting density) throughout early loblolly pine (Pinus taeda) stand development (5 years). We describe relationships of [N] and Nc of different stand components (foliage, branches, stem, roots, and competing vegetation) with carbon and biomass. Our results demonstrate that [N] of perennial loblolly tissues do not respond to silvicultural practices and progressively decrease through development. While foliar [N] was most responsive to resource availability, it was not consistent across time. Controlling competing vegetation was crucial to promote the use of site resources by the crop tree and increased loblolly Nc by >500%. However, increased N uptake and expedited growth is dependent upon fertilization early in stand development. At age 5, herbicide plus reduced and full fertilization rates exhibited similar aboveground Nc, which was 32% higher than with herbicide only. Increasing planting density resulted in increased above- and belowground loblolly Nc; however, increases in Nc were not proportional with increases in planting density. Net primary productivity and N uptake were linearly related, but age/development strongly controlled N use efficiency. Our study helps to understand complex relationships between N, biomass, and silvicultural practices during early stand development and demonstrates that temporal evaluation of nutrient dynamics is crucial to better understand loblolly pine growth, carbon sequestration potential, and to inform sustainable silvicultural practices across short rotations.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Methods for Color Center Preserving Hydrogen‐Termination of Diamond

Abstract Chemical functionalization of diamond surfaces by hydrogen is an important method for controlling the charge state of near‐surface fluorescent color centers, an essential process in fabricating devices such as diamond field‐effect transistors and chemical sensors, and a required first step for realizing families of more complex terminations through subsequent chemical processing. In all these cases, termination is typically achieved using hydrogen plasma sources that can etch or damage the diamond, as well as deposited materials or embedded color centers. This work explores alternative methods for lower‐damage hydrogenation of diamond surfaces, specifically the annealing of diamond samples in high‐purity, non‐explosive mixtures of nitrogen and hydrogen gas, and the exposure of samples to microwave hydrogen plasmas in the absence of intentional stage heating. The effectiveness of these methods are characterized by x‐ray photoelectron spectroscopy (XPS), and comparison of the results to density‐functional modelling of the surface hydrogenation energetics implicates surface oxygen ligands as the primary factor limiting the termination quality of annealed samples. Finally, photoluminescence (PL) spectroscopy is used to verify that both the annealing and reduced sample temperature plasma methods are non‐destructive to near‐surface ensembles of nitrogen‐vacancy (NV) centers, in stark contrast to plasma treatments that use heated sample stages.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Electron Redistribution within the Nitrogenase Active Site FeMo-cofactor During Reductive Elimination of H2 to Achieve N=N Triple-Bond Activation

Nitrogen fixation by nitrogenase begins with accumulation of four reducing equivalents at the active-site FeMo-cofactor (FeMo-co), generating a state (denoted E4(4H)) with two [Fe-H-Fe] bridging hydrides. Recently, photolytic reductive elimination (re) of the E4(4H) hydrides showed that enzymatic re of E4(4H) hydride yields an H2-bound complex (E4(H2,2H)), in a process corresponding to a formal 2-electron reduction of the metal-ion core of FeMo-co. The resulting electron-density redistribution from Fe-H bonds to the metal ions themselves enables N2 to bind with concomitant H2 release, a process illuminated here by QM/MM molecular dynamics simulations. What is the nature of this redistribution? Although E4(H2,2H) hasn’t been trapped, cryogenic photolysis of E4(4H) provides a means to address this question. Photolysis of E4(4H) causes hydride-re with release of H2, generating doubly-reduced FeMo-co (denoted E4(2H)*), the extreme limit of the electron-density redistribution upon formation of E4(H2,2H). Here we examine the doubly-reduced FeMo-co core of the E4(2H)* limiting-state by 1H, 57Fe, and 95Mo ENDOR to illuminate the partial electron-density redistribution upon E4(H2,2H) formation during catalysis, complementing these results with corresponding DFT computations. Inferences from the E4(2H)* ENDOR results as extended by DFT computations include: (i) the Mo-site participates negligibly, and overall it is unlikely that Mo changes valency throughout the catalytic cycle; (ii) two distinctive E4(4H) 57Fe signals are suggested as associated with ‘anchors’ of one bridging hydride, two others with anchors of the second, with NBO-analysis identifying one anchor of each hydride as a major recipient of electrons released upon breaking Fe-H bonds.

Lukoyanov, Dmitriy↗
DOE OSTI2023

A first principles analysis of potential-dependent structural evolution of active sites in Fe-N-C catalysts

Fe-N-C (iron–nitrogen–carbon) electrocatalysts have emerged as potential alternatives to precious metal-based materials for the oxygen reduction reaction (ORR). However, the structure of these materials under electrochemical conditions is not well understood, and their poor stability in acidic environments poses a formidable challenge for successful adoption in commercial fuel cells. To provide molecular-level insights into these complex phenomena, we combine periodic density functional theory (DFT) calculations, exhaustive treatment of coadsorption effects for ORR reaction intermediates, including O and OH, and comprehensive analysis of solvation stabilization effects to construct voltage-dependent ab initio thermodynamic phase diagrams that describe the in situ structure of the active sites. These structures are further linked to activity and stability descriptors that can be compared with experimental parameters such as the half-wave potential for ORR and the onset potential for carbon corrosion and CO 2 evolution. The results indicate that pyridinic Fe sites at zigzag carbon edges, as well as other edge sites, exhibit high activity for ORR compared to sites in the bulk. However, edges neighboring the active sites are prone to instability via overoxidation and consequent site loss. The results suggest that it could be beneficial to synthesize Fe-N-C catalysts with small sizes and large perimeter edge lengths to enhance ORR activity, while voltage fluctuations should be limited during fuel cell operation to prevent carbon corrosion of overoxidized edges.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Photoionization of endohedral molecules: N 2 @C 60

Calculations of the photoionization of the nitrogen $1σ_g$, $1σ_u$, and $2σ_g$, states of the N 2 @C 60 molecule are performed at the density functional theory (DFT) level taking full account of the molecular geometry of both N 2 and the C 60 . In this work, the results show that cross sections are sensitive to the parity of the final channels, with a complex interplay between the native $σ_u$ resonance in free N 2 and confinement resonances. A quite different behavior is obtained for the asymmetry parameters.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2024

Thermochemical Nonequilibrium Modeling in a Continuous-Galerkin, Finite-Element Framework

The presented work discusses the implementation, verification, and validation of Park's two-temperature model in a scalable, computational fluid dynamics (CFD) code developed at the US Department of Energy's Oak Ridge National Laboratory (ORNL). The implementation of Park's two-temperature model was verified through 0D test cases involving an adiabatic reactor and a nitrogen thermal bath. The implementation was then validated through comparisons with other validated CFD codes and experimental data on a hypersonic cylinder and double cones. These are standard benchmark test cases for thermochemical non-equilibrium (TCNE) modeling, and all data are shared publicly. The verification and validation results showed that ORNL's in-house CFD code could model complex, high-speed flow problems with and without TCNE modeling. This work is essential for future research involving 3D shock wave/boundary layer interactions (SBLIs).

Nutter, Nicole↗
DOE OSTI2024

Biochar-compost-based controlled-release nitrogen fertilizer intended for an active microbial community

Nitrogen (N) fertilizers in agriculture suffer losses by volatilization of N to the air, surface runoff and leaching into the soil, resulting in low N use efficiency (NUE) (< 50%) and raising severe environmental pollutions. Controlled- release nitrogen fertilizers (CRNFs) can control the release of N nutrients to NUE in crop production. Different methods were used to develop new CRNFs. However, different CRNF technologies are still underdeveloped due to inadequate controlling on N releasing time and/or unsustainable diffusion. The study on the influences of CRNF processing parameters on microbial conditions are lacking when the CRNFs composed of various bio-ingredients such as biochar, composts, and biowaste. The complexity of processing methods, material biodegradability, and other physical properties make current CRNFs of questionable value in agricultural production. This research aims to develop a novel biochar-compost-based controlled-release urea fertilizer (BCRUF) to preserve microbial properties carried by the compost. The BCRUF was synthesized by pelletizing the 50:50 (dry, wt/wt) mixture of biochar and compost. BCRUF was loaded with urea and then spray-coated with polylactic acid (PLA). The releasing time of two types of BCRUFs, coated and uncoated with PLA, for 80% of N release in water was up to 6 h at three different temperatures (4, 23, and 40 °C), compared to conventional urea fertilizer and commercial environmentally smart N (ESN) fertilizer. The releasing time of coated BCRUF for 80% N release in soil was up to 192 h (8 days). Fourier-transform infrared spectroscopy (FTIR) analysis revealed that no new functional groups were found in the release solution, indicating no new chemical hazards generated. The differential scanning calorimetry (DSC) tests also verified that its thermal stability could be up to 160 °C. The microbe populations in the BCRUF pellets were reduced after the pelleting and drying processes in BCRUF fabrication, but a few bacteria can endure in the air-drying process. BCRUF pellets soaked in water for 4 days retained some bacteria. The BCRUF showed very promising characteristics to improve NUE and sustainability in agricultural production.

58 GEOSCIENCES↗
DOE OSTI2023

Proximity-induced chiral quantum light generation in strain-engineered WSe 2 /NiPS 3 heterostructures

Quantum light emitters capable of generating single photons with circular polarization and non-classical statistics could enable non-reciprocal single-photon devices and deterministic spin–photon interfaces for quantum networks. To date, the emission of such chiral quantum light relies on the application of intense external magnetic fields, electrical/optical injection of spin-polarized carriers/excitons or coupling with complex photonic metastructures. Here we report the creation of free-space chiral quantum light emitters via the nanoindentation of monolayer WSe 2 /NiPS 3 heterostructures at zero external magnetic field. These quantum light emitters emit with a high degree of circular polarization (0.89) and single-photon purity (95%), independent of pump laser polarization. In this study, scanning diamond nitrogen-vacancy microscopy and temperature-dependent magneto-photoluminescence studies reveal that the chiral quantum light emission arises from magnetic proximity interactions between localized excitons in the WSe 2 monolayer and the out-of-plane magnetization of defects in the antiferromagnetic order of NiPS 3 , both of which are co-localized by strain fields associated with the nanoscale indentations.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Aluminum vacancy/sulfur complex in wurtzite AlN as an optically controllable spin qubit

Using our rational methodology, we reveal a defect in wurtzite AlN that can serve as an optically controllable spin qubit. It combines an Al vacancy and a S atom substituting the neighboring N atom (V Al⁢ S N ). Linear response GW and Bethe-Salpeter equation calculations guide us to find suitable ground and excited triplet and singlet states of V Al⁢ S N . The obtained optical spin-polarization cycle is similar to that observed in the negative nitrogen-vacancy (NV – ) center in diamond. Furthermore, the calculated optical oscillator strengths for V Al⁢ S N suggest that, in contrast to the NV – center, the optical emission in the singlet and triplet states have comparable rates, which is favorable for the qubit functionality.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Actinide N-Donor Thermodynamics: Expanding the f-element Covalency Dialogue. Final report

Resolving the chemistry and physics of f-electrons is one of the grand challenges of science for energy technology. A central component of this challenge is describing covalency in actinide-ligand interactions. Crystallography, x-ray spectroscopy and computational techniques have provided reasonable, and in some cases remarkable, support for covalency in actinide-ligand interactions. Courtesy the quality of the results obtained, a significant portion of the covalency dialogue has been forwarded through solid-state and computational studies of the more stable actinides (Th, U, Pu, Np). However; recent reports have questioned whether covalency in actinide interactions increases or decreases across the series. Examination of less-stable trans-actinides (Am, Cm, Bk, Cf and Es) by the aforementioned approaches can be rapidly limited due to material availability, radiological hazards and experimental data to validate computational models. Furthermore, limited thermodynamic data exists to confirm covalency in actinide solution phase interactions that are highly relevant to the remediation and reprocessing of used nuclear fuel. The best-defined interactions of actinides with soft donors in aqueous solutions involve (poly)aminopolycarboxylate (APC) ligands. The chelate effect and binding affinity with the acetic acid APCs subgroups encourages amine interactions with the actinide metal center. In the absence of these factors, amine interactions with actinides are too weak to overcome the protective hydration shell of the dissolved ion. The ability for APCs to force actinide interactions with soft nitrogen donors (as defined by Pearson’s Hard Soft Acid Base theory) encourages the application of these ligands in a variety of processes for actinide recovery from nearly chemically identical lanthanides. The ability to functionalize the amine center of the ligand in a variety of capacities (adding additional amine groups, exchanging the conventional acetate group for an acetate group, etcetera), allows for the APC ligand to serve as a thermodynamic probe for actinide-nitrogen interactions. Perhaps the single most significant breakthrough during the previous funding cycle was the observation that covalency for the transplutonium part of the actinide series can be increasingly influenced with energy degeneracy driven covalency as the actinides become heavier. This was observed most predominantly with dipicolinic acid, but extensions of f-orbital degeneracy were found to affect aliphatic aminopolycarboxylate-actinide complexes through einsteinium.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Deciphering the Olefin Isomerization-Polymerization Paradox of Palladium(II) Diimine Catalysts: Discovery of Simultaneous and Independent Pathways of Olefin Isomerization and Living Polymerization

This work elucidates a long-standing unexplained paradox commonly observed within the polymerization of α-olefin using palladium (Pd)(II)–diimine catalysts, in which isomerization and living polymerization of α-olefins are both observed. With a classical mechanistic understanding of these complexes, this behavior is often dismissed and interpreted as experimental error. Herein, we present a comprehensive mechanistic investigation into this phenomenon that supports the existence of a novel mechanistic pathway for Pd(II)–diimine complexes. Part one of the mechanistic study lays the foundation of the proposed mechanism, in which neutral Pd(II)–diimine complexes were found to exhibit a moderate to good catalytic activity for olefin isomerization of α-olefins despite the established notion that catalyst activation is required. Extensive experimental and computational studies reveal the possibility of a partial dissociation of the diimine ligand, which frees up one coordination site and enables coordination–insertion. This finding is significant as the coexistence of two reactive coordination sites at the palladium center becomes a valid proposal for the activated cationic Pd(II)–diimine complexes. In part two, we examined and validated the simultaneously observed α-olefin isomerization and living polymerization using the cationic Pd(II)–diimine catalyst, which supports the presence of two independent reaction pathways of isomerization and polymerization, respectively. Furthermore, the addition of a strong Lewis acid, such as AlCl 3 , accelerates the ligand dissociation and the consequential isomerization as it weakens the palladium–nitrogen bond through competitive binding. In part three, Lewis acid-triggered olefin isomerization-polymerization is employed to prepare living olefinic block copolymers and further synthesize novel polyolefin-polar block copolymers with unique architectures, distinct levels of branching, crystallinity, and polar functionality in a one-pot manner.

Catalysts↗
DOE OSTI2026

Irradiation Impact on Uranium Recovery Under Direct Extraction Conditions

Reducing the quantity of high-level radioactive waste is essential for minimizing environmental impact and improving efficiency of using natural resources for nuclear power. The current standard, Plutonium Uranium Solvent EXtraction (PUREX), uses tributyl phosphate (TBP) ligands to extract complexes of uranium and plutonium from a nitric acid (HNO3) phase. Although this method is effective, large volumes of HNO3 and the non-incinerable phosphate ligands increase the amount of hazardous waste produced. Alternative extractants and flowsheets have been proposed that allow for more selective extraction of radioactive metals, reduced nitric acid use, and easier incineration by only containing carbon, hydrogen, oxygen, and nitrogen (CHON). One candidate, N,N-di(2-ethylhexyl)-isobutyramide (DEHiBA) exhibits promising properties for direct extraction. A HNO3 pre-equilibrated DEHiBA phase selectively extracts U(VI), leaving plutonium, transuranics, and fission products behind as precipitate and reducing the volume of radioactive HNO3 produced.

38 - RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCL↗
DOE OSTI2025

Defect Engineering in Large‐Scale CVD‐Grown Hexagonal Boron Nitride: Formation, Spectroscopy, and Spin Relaxation Dynamics

Recently, numerous techniques have been reported for generating optically active defects in exfoliated hexagonal boron nitride (hBN), which hold transformative potential for quantum photonic devices. However, achieving on-demand generation of desirable defect types in scalable hBN films remains a significant challenge. Here, it is demonstrated that formation of negative boron vacancy defects, V B − , in suspended, large-area CVD-grown hBN is strongly dependent on the type of bombarding particles (ions, neutrons, and electrons) and irradiation conditions. In contrast to suspended hBN, defect formation in substrate-supported hBN is more complex due to the uncontrollable generation of secondary particles from the substrate, and the outcome strongly depends on the thickness of the hBN. Different defect types are identified by correlating spectroscopic and optically detected magnetic resonance features, distinguishing boron vacancies (formed by light ions and neutrons and emitting at 800 nm) from other optically active defects emitting at 650 nm assigned to anti-site nitrogen vacancy (N B V N ) and reveal the presence of additional “dark” paramagnetic defects that influence spin-lattice relaxation time (T 1 ) and zero-field splitting parameters, all of which strongly depend on the defect density. These results underscore the potential for precisely engineered defect formation in large-scale CVD-grown hBN, paving the way for the scalable fabrication of quantum photonic devices.

CVD↗
DOE OSTI2022

Materials synthesis at terapascal static pressures

Theoretical modelling predicts very unusual structures and properties of materials at extreme pressure and temperature conditions. Hitherto, their synthesis and investigation above 200 gigapascals have been hindered both by the technical complexity of ultrahigh-pressure experiments and by the absence of relevant in situ methods of materials analysis. Here we report on a methodology developed to enable experiments at static compression in the terapascal regime with laser heating. We apply this method to realize pressures of about 600 and 900 gigapascals in a laser-heated double-stage diamond anvil cell, producing a rhenium–nitrogen alloy and achieving the synthesis of rhenium nitride Re 7 N 3 —which, as our theoretical analysis shows, is only stable under extreme compression. Full chemical and structural characterization of the materials, realized using synchrotron single-crystal X-ray diffraction on microcrystals in situ, demonstrates the capabilities of the methodology to extend high-pressure crystallography to the terapascal regime.

36 MATERIALS SCIENCE↗
DOE OSTI2020

WA-IsoC_MSC1.1.0

The soil microbiome is central to the cycling of carbon and other nutrients and to the promotion of plant growth. Despite its importance, analysis of the soil microbiome is difficult due to its sheer complexity, with thousands of interacting species. Here, we reduced this complexity by developing model soil microbial consortia that are simpler and more amenable to experimental analysis but still represent important microbial functions of the native soil ecosystem. Samples were collected from an arid grassland soil and microbial communities (consisting mainly of bacterial species) were enriched on agar plates containing chitin as the main carbon source. Chitin was chosen because it is an abundant carbon and nitrogen polymer in soil that often requires the coordinated action of several microorganisms for complete metabolic degradation. Several soil consortia were derived that had tractable richness (30-50 OTUs) with diverse phyla representative of the native soil, including Actinobacteria, Bacteroidetes, Firmicutes, Proteobacteria and Verrucomicrobia. The resulting consortia can be stored as glycerol or lyophilized stocks at -80° C and revived while retaining community composition, greatly increasing their use as tools for the research community at large. One of the consortia that was particularly stable was chosen as a model soil consortium (MSC-1) for further analysis. MSC-1 species interactions were studied using both pairwise co-cultivation in liquid media and during growth in soil under several perturbations. Co-abundance analyses highlighted interspecies interactions and helped to define keystone species, including Mycobacterium, Rhodococcus, and Rhizobiales taxa. These experiments demonstrate the success of an approach based on naturally enriching a community of interacting species that can be stored, revived, and shared. The knowledge gained from querying these communities and their interactions will enable better understanding of the soil microbiome and the roles these interactions play in this environment.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Data-driven prediction of the output composition of an atmospheric pressure plasma jet

Cold atmospheric plasma (CAP) in open air hosts numerous chemical species engaged in thousands of chemical reactions. Comprehensive diagnosis of its chemical composition is important across various fields from medicine, where reactive oxygen and nitrogen play key roles, to surface modification. In applications, a centimeter-scale helium–air jet operates for minutes, featuring micrometer-sized streamers and an atmospheric pressure-induced collision frequency in the hundreds of GHz range. To address this intricate multi-scale issue, we introduce a machine learning approach: using a physics-informed neural network (PINN) to tackle the multi-scale complexities inherent in predicting the complete list of species concentrations, gas temperature, and electron temperature of a CAP jet supplied with a mixture of helium and air. Experimental measurements of O 3 , N 2 O, and NO 2 concentrations downstream of the plasma jet, combined with fundamental physics laws, the conservation of mass and charge, constrain the PINN, enabling it to predict the concentrations of all species that are not available from the experiment, along with gas and electron temperatures. The results, therefore, obey all the physical laws we provided and can have a chemical balance with the measured concentrations. In conclusion, this methodology holds promise for describing and potentially regulating complex systems with limited experimental datasets.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Experimental Soil Warming Impacts Soil Moisture and Plant Water Stress and Thereby Ecosystem Carbon Dynamics

Experimental soil heating experiments have found a consistent increase in soil-surface CO 2 emissions ( F s ), but inconsistent soil organic carbon (SOC) responses. Interpretation of heating effects is complicated by spatial heterogeneity and soil moisture, nitrogen availability, and microbial and plant responses. Here we applied a mechanistic ecosystem model to interpret heating impacts on a California forest subjected to 1 m deep, 4°C heating. The model accurately simulated control-plot CO 2 fluxes, SOC stocks, fine root biomass, soil moisture, and soil temperature, and the observed increases in F s and decreases in fine root biomass. We show that a complex suite of interactions can lead to a consistent increase in F s (~17%) over the 5-year study period, with very small changes in SOC stocks (<1%). Modeled increases in leaf water stress from soil drying reduced GPP and NPP. The resulting reduction in leaf and fine root allocation increased fine root litter inputs to the soil and reduced root exudation. Soil heating led to about a 50% larger increase in root autotrophic respiration than in heterotrophic respiration, with the heating effect on both these fluxes decreasing over the simulation period. Increased heterotrophic respiration led to increased soil N availability and plant N uptake. These heating responses are mechanistically linked, of magnitudes that can affect ecosystem dynamics, and long-term observations of them are rarely made. Therefore, we conclude that a coupled observational and mechanistic modeling framework is needed to interpret manipulation experiments, and to improve projections of climate change impacts on terrestrial ecosystem carbon dynamics.

54 ENVIRONMENTAL SCIENCES↗