Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “multipath”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

A Tone-Aided/Dual Vestigial Sideband (TA/DVSB) system for mobile satellite channels

Tone-aided modulation is one way of combatting the effects of multipath fading and Doppler frequency shifts. A new tone-aided modulation format for M-ary phase-shift keyed signals (MPSK) is discussed. A spectral null for the placement of the tone is created in the center of the MPSK signal by translating the upper sideband upwards in frequency by the same amount. The key element of the system is the algorithm for recombining the data sidebands in the receiver, a function that is performed by a specialized phase-locked loop (PLL). The system structure is discussed and simulation results showing the PLL acquisition performance are presented.

Saulnier, Gary J.↗

Comparison of FDMA and CDMA for second generation land-mobile satellite communications

Code Division Multiple Access (CDMA) and Frequency Division Multiple Access (FDMA) (both analog and digital) systems capacities are compared on the basis of identical link availabilities and physical propagation models. Parameters are optimized for a bandwidth limited, multibeam environment. For CDMA, the benefits of voice activated carriers, antenna discrimination, polarization reuse, return link power control and multipath suppression are included in the analysis. For FDMA, the advantages of bandwidth efficient modulation/coding combinations, voice activated carriers, polarization reuse, beam placement, and frequency staggering were taken into account.

Yongacoglu, A.↗

Fade durations in satellite-path mobile radio propagation

Fades on satellite to land mobile radio links are caused by several factors, the most important of which are multipath propagation and vegetative shadowing. Designers of vehicular satellite communications systems require information about the statistics of fade durations in order to overcome or compensate for the fades. Except for a few limiting cases, only the mean fade duration can be determined analytically, and all other statistics must be obtained experimentally or via simulation. This report describes and presents results from a computer program developed at Virginia Tech to simulate satellite path propagation of a mobile station in a rural area. It generates rapidly-fading and slowly-fading signals by separate processes that yield correct cumulative signal distributions and then combines these to simulate the overall signal. This is then analyzed to yield the statistics of fade duration.

Schmier, Robert G.↗

Direct sequence spread spectrum CDMA in shared spectrum applications

Personal Communication Network (PCN) is an entirely wireless communication system with the capability of assessing the wired telephone system to reach anyone processing only a wired telephone. It is expected to compete with the existing mobile cellular system which connects directly to the wired telephone system. While many PCN systems employ TDMA technology, the PCN system described here uses Broadband CDMA (BCDMA(sup SM)) which is capable of sharing the spectrum with other users and which is extremely resistant to fading caused by multipath.

Schilling, Donald L.↗

Error analysis of image reconstruction by a synthetic aperture interferometric radiometer

An error analysis is presented for the image reconstruction algorithm currently employed by the electronically steered thinned array radiometer aircraft instrument. This instrument samples components of the Fourier transform of the brightness temperature distribution at 1.4 GHz. Sources of error are identified, including systematic offsets and stochastic noise in the measurements, errors in the interference pattern antenna calibration, multipath scattering from the antenna support structure, mutual coupling between nearby array elements, and variations in the antenna patterns of the array elements. These errors are shown to produce artifacts in the image which appear as 'streaks' running along the instrument flight line. Possible hardware corrections are discussed. These include a reduction in the profile of the antenna support structure and a decoupling of adjacent and other nearby array elements using corrugated 'skirts'. Also discussed are several image enhancement techniques which detect and correct for some of the streaking. These techniques include a renormalization of the interference patterns based on the measured element patterns, a perturbation based interpretation of image contrast, and a covariance analysis of noise present in the image.

Ruf, Christopher S.↗

Channel coding for digital HDTV terrestrial broadcasting

The Federal Communications Commission of the United States has ruled that high-definition television (HDTV) will occupy no more than 6 MHz of the VHF and UHF bands now used for conventional TV. In order to transmit the HDTV signal in 6 MHz, the four United States digital HDTV proponents, the DigiCipher, DSC-HDTV, ADTV, and ATVA-P systems, are reducing the video data rate of HDTV to 15-17 Mb/s, a compression ratio of approximately 60-70 times. The high compression dictates that channel coding be used to avoid block errors and multiframe error propagation. High efficiency in channel utilization required by the 6-MHz limitation means that the channel must be properly equalized and that the multipath and interfering signals must be severely limited. The channel coding techniques used for error reduction include data interleaving, error detection and replacement, and error correction at different levels of protection for bits and blocks of unequal importance.

Beakley, Guy W.↗

Rapid resolution of crustal motion at short ranges with the global positioning system

An analysis of GPS alignment array data collected in November 1990 and February 1991 are used to assess the temporal resolution of crustal deformation for GPS receiver systems operating as strain meters, and guidelines for achieving millimeter-level precision with short-range, kinematic-type GPS measurements are provided. Baselines between the array endpoints computed from 24 min of static observations on three consecutive days show an rms scatter of about 0.1 nm in the horizontal components and of about 0.3 mm in the vertical. They agree to within 0.2 mm with a solution calculated from measurements collected 3 mo earlier, indicating that this segment of the San Andreas fault appears to be locked at the surface over this period of time. Epoch-by-epoch solutions of array baselines with a six-satellite constellation show a multipath signature with typical amplitudes of several millimeters and periods of a few minutes.

Genrich, Joachim F.↗

Electromagnetic compatibility (EMC) standard test chamber upgrade requirements for spacecraft design verification tests

In view of the serious performance deficiencies inherent in conventional modular and welded shielding EMC test enclosures, in which multipath reflections and resonant standing waves can damage flight hardware during RF susceptibility tests, NASA-Goddard has undertaken the modification of a 20 x 24 ft modular-shielded enclosure through installation of steel panels to which ferrite tiles will be mounted with epoxy. The internally reflected RF energy will thereby be absorbed, and exterior power-line noise will be reduced. Isolation of power-line filters and control of 60-Hz ground connections will also be undertaken in the course of upgrading.

Dyer, Edward F.↗

Scattering effects of Space Station structure on Assembly/Contingency Subsystem (ACS) antenna performance

ACS antenna patterns were computed using the Geometrical Theory of Diffraction (GTD) modeling technique in which the multipath interference from the Space Station structures was included. The accuracy of the numerical results obtained is verified by comparing them against a series of RF anechoic chamber measurements. Less than 1 dB degradation is expected if a +/- 15 deg cone is used to protect the ACS high gain antenna boresight pattern; a +/- 20 deg cone is required if no more than 0.5 dB gain degradation is desired.

Hwu, Shian U.↗

Microwave landing system modeling with application to air traffic control automation

Compared to the current instrument landing system, the microwave landing system (MLS), which is in the advanced stage of implementation, can potentially provide significant fuel and time savings as well as more flexibility in approach and landing functions. However, the expanded coverage and increased accuracy requirements of the MLS make it more susceptible to the features of the site in which it is located. An analytical approach is presented for evaluating the multipath effects of scatterers that are commonly found in airport environments. The approach combines a multiplane model with a ray-tracing technique and a formulation for estimating the electromagnetic fields caused by the antenna array in the presence of scatterers. The model is applied to several airport scenarios. The reduced computational burden enables the scattering effects on MLS position information to be evaluated in near real time. Evaluation in near real time would permit the incorporation of the modeling scheme into air traffic control automation; it would adaptively delineate zones of reduced accuracy within the MLS coverage volume, and help establish safe approach and takeoff trajectories in the presence of uneven terrain and other scatterers.

Poulose, M. M.↗

Comparative study on the performance of power and bandwidth efficient modulations in LMSS under fading and interference

Aspects of error performance of various power and bandwidth efficient modulations for the land mobile satellite systems (LMSS) were investigated under multipath fading and interferences by using Monte-Carlo simulation. A differential detection for 16QAM (quadrature amplitude modulation) was proposed to cope with Ricean fading and Doppler shift. Computer simulation results show that the performance of 16QAM with differential detection is as good as that of 16PSK with coherent detection and 3 dB better than that of 16PSK with differential detection, although it degrades by about 4.5 dB as compared to 16QAM with coherent detection under an additive white Gaussian noise (AWGN) channel. For the nonlinear channels, 16QAM with modified signal constellations is introduced and analyzed. The simulation results show that the modified 16QAM exhibits a gain of 2.5 dB over 16PSK under traveling-wave tube nonlinearity, and about 4 dB gain over 16PSK at the bit error rate of 10 exp -5 under AWGN. Computer simulation results for modified 16 QAM under cochannel interference and adjacent-channel interference are also presented.

Liu, Jian↗

GPS Interferometry

This semi-annual progress report provides an overview of the work performed during the first six months of Grant NAG 1 1423, titled 'GPS Interferometry'. The Global Positioning System (GPS) is a satellite-based positioning and timing system. Through the use of interferometric processing techniques, it is feasible to obtain sub-decimeter position accuracies for an aircraft in flight. The proposed duration of this Grant is three years. During the first year of the Grant, the efforts are focussed on two topics: (1) continued development of GPS Interferometry core technology; and (2) rapid technology demonstration of GPS interferometry through the design and implementation of a flight reference/autoland system. Multipath error has been the emphasis of the continued development of GPS Interferometry core technology. The results have been documented in a Doctoral Dissertation and a conference paper. The design and implementation of the flight reference/autoland system is nearing completion. The remainder of this progress report summarizes the architecture of this system.

Vangrass, Frank↗

L- and K-band LMSS propagation measurements using MARECS-B, OLYMPUS, and ACTS

L-band measurements of land mobile satellite systems (LMSS) propagation effects were last made at the end of 1988, but some voids were left in the database, making modeling of low elevation roadside tree shadowing and multipath reflections difficult for some path geometries. Transmission of a pilot tone from MARECS-B at 55 deg West during Sep. and Dec. 1991 gave an opportunity to fill the gaps in the experimental results. Two campaigns during which fade data were obtained at elevation angles from 7 deg to 40 deg are described. Below 15 deg, specular terrain reflections in a non-shadowing, hilly environment were observed to introduce significant fading. Although the reflecting surface was at a distance of up to several km, it is shown that the reflected signals are delayed by less than 1 microsec. Mobile measurements were also attempted receiving the 20 GHz Olympus beacon, but antenna pointing problems restricted first results to straight-line driving.

Vogel, W. J.↗

Performance evaluation of land mobile satellite system under fading and interference using multiple TCM by Monte-Carlo simulation

The performance of the land mobile satellite system (LMSS) was evaluated by using two trellis coded modulation (TCM) schemes under multipath fading and interference. The results were also compared with uncoded QPSK. The trellis coding formats included a trellis code designed for optimum performance on the fading channel that typifies satellite to mobile communications, as well as one designed for optimum performance in the additive white Gaussian noise (AWGN) channel. The results show that, in Rayleigh fading, the TCM code designed for optimum performance in such an environment performs 4 dB better than the TCM code designed for optimum performance in AWGN, and 10 dB better than the uncoded format, at a bit error rate (BER) of 10 exp -4. Additional results on the performance degradation due to the nonlinearities in the satellite transponder and the adjacent and cochannel interference show that the TCM system is more sensitive than the uncoded system to the phase distortion caused by these impairments.

Kwa, S. C.↗

Results of multiband (L, S, Ku band) propagation measurements and model for high elevation angle land mobile satellite channel

Signal propagation in the land mobile satellite (LMS) service is an important consideration due to its critical impact on the overall economic and commercial viability of the system. At frequencies allocated for LMS systems, shadowing of the line-of-sight (LOS) signal as well as multipath propagation phenomena can severely impair the link availability. In particular, as most of the studies have shown, the shadowing of LOS signal causes long and deep fades in a variety of mobile environments due to the inherent nature of the channel between the satellite and a mobile. Roadside obstacles, such as buildings, trees, utility poles etc., in the immediate vicinity of a mobile and the surrounding terrain are major sources of signal shadowing in LMS links. Therefore, a proper knowledge of link degradation is essential for cost-effective planning of a satellite based mobile communication system. The results of a propagation campaign undertaken to characterize the fading nature of LMS channel at high elevation angles is presented. It was envisaged that one of the most important physical variables contributing to the amount of LOS signal shadowing is the elevation angle of the satellite. At higher elevation angles to the satellite, less obstructions in the direct satellite-to-mobile path would therefore amount to statistically better link availability. Narrowband channel measurements were carried out at three RF frequencies corresponding to L (1.3 GHz), S (2.32/2.45 GHz), and Ku (10.4 GHz) bands. The campaign itself was divided into two phases to observe the effects of seasonal variation of foliage on the roadside trees. Phase measurements were carried out in September 1991 and in April 1992. Some important aspects from the statistical analysis of the propagation data are presented.

Parks, M. A. N.↗

Satellite sound broadcast propagation measurements

Power transmitted from atop a 17.9 m tower in simulation of a satellite signal, emitted by a tone generator sweeping from 700 to 1800 MHz, was received using a 90 deg beamwidth linearly scanning antenna at many locations inside six buildings of solid brick, corrugated sheet-metal, wood-frame, mobile home, and concrete wall construction. The signal levels are found to have much structure in the spatial and frequency domain but were relatively stable in time. Typically, people moving nearby produced less than 0.5 dB variations, whereas a person blocking the transmission path produces 6 to 10 dB fades. Losses, which at an average position in a room increased from 6 to 12 dB over 750 to 1750 MHz, could be mitigated to 2 to 6 dB by moving the antenna typically less than 30 cm. Severe losses (17.5 dB, mitigated to 12.5 dB) were observed in a concrete wall building, which also exhibited the longest multipath delays (greater than 100 ns). Losses inside a mobile home were even larger (greater than 20 dB) and independent of antenna orientation. The losses showed a clear frequency dependence.

Vogel, Wolfhard J.↗

An overview of the text propagation effects for land-mobile-satellite systems: Experimental and modeling results

We present an overview of the contents of the text having the above title and which is now in the form of a preliminary document titled, 'Propagation Handbook for Land-Mobile-Satellite Systems-Preliminary.' At this writing the text is undergoing peer review, and the final revised manuscript will be published in the near future as a NASA document. The text was inspired by a series of Land-Mobile-Satellite System (LMSS) experiments by the authors and other investigators at UHF and L-Band. The rationale for its writing is to place in a single document an overview of the previous propagation related salient experimental and modeling results pertaining to LMSS scenarios. It is apparent that LMSS propagation at UHF and L-Band can be seriously degraded because of attenuation (e.g., greater than 10 dB) caused by roadside tree shadowing. The extent of attenuation is shown to depend on such factors at the elevation angle to the satellite, the bearing of the line-of-signt path to the satellite relative to the line of roadside trees, the side of the road in which the vehicle is driven, the season, and the frequency. Multipath effects during line-of-sight communications are shown to cause less serious fading (e.g., smaller than 3 dB for 90 percent of the driving distance).

Goldhirsh, Julius↗

Mobile terminal antennas for helicopters

In this paper, the feasibility of using an L-band low gain antenna (LGA) as a mobile terminal antenna for helicopters is described. The objective is to select the lowest cost antenna system which can be easily mounted on a helicopter and capable of communicating with a geosynchronous satellite. To ensure that all the antenna options are being considered, the steerable high gain reflector and medium gain array antennas as well as LGA are studied and compared in an exhaustive survey. The high gain reflector antenna in L-band is usually very large in size and heavy in weight. In addition, a bulky and expensive tracking system is needed to steer the antenna beam to the satellite direction. The medium gain antennas (including mechanically and electronically steered arrays) are also more expensive and less reliable than an LGA due to the addition of a beam steering system to track the satellite. The omni-directional LGA is simple, reliable, and inexpensive. It is typically ten times smaller than the medium gain antenna. This makes the position, selection, and mounting on the helicopter relatively easier. Therefore, the LGA is selected as a mobile terminal antenna for helicopters. Among the many LGA's (cross-dipole, helix, spiral, and slot antennas), the helix antenna is the most inexpensive. One can also change the size, shape, or pitch angle of the helix to optimize the gain in the desired direction. Therefore, the helix antenna is selected for further study. Both 2-arm and 4-arm helices are studied theoretically and experimentally to determine the antenna's performance and the scattering effects from the helicopter body and the blades. The multipath, Doppler, and Doppler rate issues as well as the periodic fading effects caused by the helicopter rotor blades will be briefly discussed in the paper.

Wu, Te-Kao↗