Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “moderation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

The Moderately (D)efficient Enzyme: Catalysis-Related Damage In Vivo and Its Repair

Enzymes have in vivo life spans. Analysis of life spans, i.e., lifetime totals of catalytic turnovers, suggests that nonsurvivable collateral chemical damage from the very reactions that enzymes catalyze is a common but underdiagnosed cause of enzyme death. Analysis also implies that many enzymes are moderately deficient in that their active-site regions are not naturally as hardened against such collateral damage as they could be, leaving room for improvement by rational design or directed evolution. Enzyme life span might also be improved by engineering systems that repair otherwise fatal active-site damage, of which a handful are known and more are inferred to exist. Unfortunately, the data needed to design and execute such improvements are lacking: there are too few measurements of in vivo life span, and existing information about the extent, nature, and mechanisms of active-site damage and repair during normal enzyme operation is too scarce, anecdotal, and speculative to act on. Fortunately, advances in proteomics, metabolomics, cheminformatics, comparative genomics, and structural biochemistry now empower a systematic, data-driven approach for identifying, predicting, and validating instances of active-site damage and its repair. These capabilities would be practically useful in enzyme redesign and improvement of in-use stability and could change our thinking about which enzymes die young in vivo, and why.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Flux Equations for Osmotically Moderated Sorption–Diffusion Transport in Rigid Microporous Membranes

The development of non-aqueous reverse osmosis separations via the use of rigid microporous membrane materials suggests that flux equations originally developed for swellable polymeric membranes should be revisited. This paper demonstrates that the gradient of fractional occupancy of penetrant molecules within the micropores of the membrane is the driving force for permeation without requiring assumptions about pressure within the membrane. Flux equations are derived using both Fickian and Maxwell-Stefan approaches, and different behavior in the permeate flux versus upstream hydraulic pressure relationship is shown to arise as a result of differences in the loading dependence of the single component Maxwell-Stefan diffusivity. Molecular modeling results available in the literature and experimental data obtained from carbon molecular sieve (CMS) membranes showcase that these loading-dependent changes in the Maxwell-Stefan diffusivity are possible. This loading dependence is separated into three regimes: so-called “weak confinement” diffusion and “strong confinement” diffusion, both of which have been discussed at length in the literature, and a new “hybrid confinement” diffusion, which is introduced here. Furthermore, the separation mechanism of solvent molecules through a rigid bimodally microporous membrane is studied using xylene molecules passing through CMS membranes fabricated under different conditions as examples. Altogether, this study provides fundamental insight and guidance into osmotically-moderated sorption-diffusion transport of solvent molecules through rigid microporous membranes.

36 MATERIALS SCIENCE↗

Chemical method for evaluating catalytic turnover frequencies (TOF) of moderate to slow H2 oxidation electrocatalysts

Hydrogen has emerged as a long-term option for storing energy from renewable resources and has led the scientific community to develop enzyme-inspired catalysts for hydrogen oxidation and production. One of the most productive families of catalysts for H2 oxidation is the pendant amine containing bis-(diphosphine)nickel catalysts. Many derivatives of these nickel complexes have been prepared with varying peripheral functionalities to understand their structure-function relationship. Electrocatalysis is currently utilized as the primary tool to measure the catalytic turn over frequencies (TOFs) of these complexes, however, it does not allow accurate determination of TOFs for slow (< 1 s-1) to moderately active (~ 1-10 s-1) catalysts, and for the slowest catalysts, it can be difficult to determine if they are turning over at all. Further, it does not allow the determination of the TOF in bulk solution. In this work, we demonstrate that using a redox chemical procedure involving a change between ferrocenium cation to ferrocene can be utilized to monitor H2 oxidation catalysts. The ferrocenium cation reoxidizes the reduced nickel catalyst stoichiometrically in the presence of H2. The change of ferrocenium cation to ferrocene can be monitored in both organic and aqueous solvents via either optical spectroscopy or NMR spectroscopy. Thus, this chemical method complements the existing electrocatalytic procedure and may help to unravel the intricate details of even the slowest H2 oxidation catalysts.

Dutta, Arnab↗

Lower Urban Humidity Moderates Outdoor Heat Stress

Abstract Surface temperature is often used to examine heat exposure in multi‐city studies and for informing urban heat mitigation efforts due to scarcity of urban air temperature measurements. Cities also have lower relative humidity, traditionally not accounted for in large‐scale observational urban heat risk assessments. Here, using crowdsourced measurements from over 40,000 weather stations in ≈600 urban clusters in Europe, we show the moderating effect of this urbanization‐induced humidity reduction on outdoor heat stress during the 2019 heatwave. We demonstrate that daytime differences in heat index between urban clusters and their surroundings are weak, and associations of this urban‐rural difference with background climate, generally examined from the surface temperature perspective, are diminished due to moisture feedbacks. We also examine the spatial variability of surface temperature, air temperature, and heat index within these clusters—relevant for detecting hotspots and potential disparities in heat exposure—and find that surface temperature is a poor proxy for the intra‐urban distribution of heat index during daytime. Finally, urban vegetation shows much weaker (∼1/6th as strong) associations with heat index than with surface temperature, which has broad implications for optimizing urban heat stress mitigation strategies. These findings are valid for operational metrics of heat stress for shaded conditions (apparent temperature and humidex), thermodynamic proxies (wet‐bulb temperature), and empirical heat indices. Based on this large‐scale empirical evidence, surface temperature, used due to the lack of better alternatives, may not be suitable for accurately informing heat mitigation strategies within and across cities, necessitating more urban‐scale observations and better urban‐resolving models.

54 ENVIRONMENTAL SCIENCES↗

Generation of a Strong Parallel Electric Field and Embedded Electron Jet in the Exhaust of Moderate Guide Field Reconnection

Abstract Magnetospheric Multiscale observed an extended current layer concurrent with a strong parallel electric field. The current layer is embedded in the reconnection exhaust and is consistent with an extended magnetized jet expected in roughly symmetric moderate guide field reconnection. The strong parallel electric field observed at the jet balances a strong gradient in the parallel electron pressure caused by a transition between magnetized electrons with T e ‖ > T e ⊥ on one side of the jet and demagnetized, roughly isotropic electrons across the thin current layer. Simulation results show how this transition can occur and how the associated electron pressure gradients in Ohm's law balance the parallel electric field.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

In Situ Determination of Thermoelastic Properties of Magnesite at High Pressure and Temperature With Implications to Seismic Detectability of Moderately Carbonated Lithologies in the Earth's Mantle

Abstract Subduction of carbonate‐bearing oceanic plates into Earth's interior recycles carbon from the surface to the deep mantle. The subducted carbonates can significantly affect mantle properties and dynamics. Magnesite is recognized as one of the major potential carbon hosts in the deep mantle because of its stability up to deep lower mantle conditions. However, despite many previous studies on the equation of state and elastic properties of magnesite, large discrepancies still exist for its elastic moduli and their pressure and temperature derivatives. Here we report in situ density and elastic wave velocity measurements on a natural magnesite at simultaneous high pressure‐temperature conditions up to ∼8 GPa–1073 K in a multi‐anvil apparatus using ultrasonic and synchrotron X‐ray techniques. Global fitting of the data set to finite strain equations yieldsK S0 = 114.0 ± 1.2 GPa, = 4.9 ± 0.3, = (−0.019 ± 0.002) GPa/K,G 0 = 68.6 ± 0.4 GPa,G′ = 1.6 ± 0.1, and = (−0.018 ± 0.001) GPa/K. Compared to other major upper mantle and transition zone minerals, magnesite has intermediateV P , the lowestV S , and the lowest density. Thus, magnesite possesses higherV P /V S ratio than other mantle minerals in normal mantle regions, whereas this feature is less pronounced in subduction zone environments. Modeling of the velocity profiles of carbonated lithologies along different geotherms suggests that moderately‐enriched magnesite domains are unlikely to be detected seismically in the Earth's mantle.

Geochemistry & Geophysics↗

Urban land patterns can moderate population exposures to climate extremes over the 21st century

Abstract Climate change and global urbanization have often been anticipated to increase future population exposure (frequency and intensity) to extreme weather over the coming decades. Here we examine how changes in urban land extent, population, and climate will respectively and collectively affect spatial patterns of future population exposures to climate extremes (including hot days, cold days, heavy rainfalls, and severe thunderstorm environments) across the continental U.S. at the end of the 21st century. Different from common impressions, we find that urban land patterns can sometimes reduce rather than increase population exposures to climate extremes, even heat extremes, and that spatial patterns instead of total quantities of urban land are more influential to population exposures. Our findings lead to preliminary suggestions for embedding long-term climate resilience in urban and regional land-use system designs, and strongly motivate searches for optimal spatial urban land patterns that can robustly moderate population exposures to climate extremes throughout the 21st century.

54 ENVIRONMENTAL SCIENCES↗

The effect of residential solar on energy insecurity among low- to moderate-income households

Each year, millions of Americans experience energy insecurity, or the inability to afford enough energy to meet their basic needs. Here, this study evaluates whether residential rooftop solar can serve as a preventative solution to energy insecurity among low- to moderate-income households. Using a national, matched sample of solar and non-solar households based on detailed and address-specific data, we find that solar leads to large, robust and salient reductions in five indicators of energy insecurity. Moreover, the benefits of solar ‘spill over’ to improve a household’s ability to pay other energy bills. The results suggest that rooftop solar may be an effective tool for policymakers who seek to reduce energy insecurity.

14 SOLAR ENERGY↗

Substantial oxygen loss and chemical expansion in lithium-rich layered oxides at moderate delithiation

Delithiation of layered oxide electrodes triggers irreversible oxygen loss, one of the primary degradation modes in lithium-ion batteries. However, the delithiation-dependent mechanisms of oxygen loss remain poorly understood. Here we investigate the oxygen non-stoichiometry in Li 1.18–x Ni 0.21 Mn 0.53 Co 0.08 O 2–δ electrodes as a function of Li content by using cycling protocols with long open-circuit voltage steps at varying states of charge. Surprisingly, we observe substantial oxygen loss even at moderate delithiation, corresponding to 2.5, 4.0 and 7.6 ml O 2 per gram of Li 1.18–x Ni 0.21 Mn 0.53 Co 0.08 O 2–δ after resting at upper capacity cut-offs of 135, 200 and 265 mAh g −1 for 100 h. Our observations suggest an intrinsic oxygen instability consistent with predictions of high oxygen activity at intermediate potentials versus Li/Li + . In addition, we observe a large chemical expansion coefficient with respect to oxygen non-stoichiometry, which is about three times greater than those of classical oxygen-deficient materials such as fluorite and perovskite oxides. Furthermore, our work challenges the conventional wisdom that deep delithiation is a necessary condition for oxygen loss in layered oxide electrodes and highlights the importance of calendar ageing for investigating oxygen stability.

Atomistic models↗

Joint optimization of land carbon uptake and albedo can help achieve moderate instantaneous and long-term cooling effects

Abstract Both carbon dioxide uptake and albedo of the land surface affect global climate. However, climate change mitigation by increasing carbon uptake can cause a warming trade-off by decreasing albedo, with most research focusing on afforestation and its interaction with snow. Here, we present carbon uptake and albedo observations from 176 globally distributed flux stations. We demonstrate a gradual decline in maximum achievable annual albedo as carbon uptake increases, even within subgroups of non-forest and snow-free ecosystems. Based on a paired-site permutation approach, we quantify the likely impact of land use on carbon uptake and albedo. Shifting to the maximum attainable carbon uptake at each site would likely cause moderate net global warming for the first approximately 20 years, followed by a strong cooling effect. A balanced policy co-optimizing carbon uptake and albedo is possible that avoids warming on any timescale, but results in a weaker long-term cooling effect.

54 ENVIRONMENTAL SCIENCES↗

Ultra diffuse galaxies in the MATLAS low-to-moderate density fields

Recent advances in deep dedicated imaging surveys over the past decade have uncovered a surprisingly large number of extremely faint low surface brightness galaxies with large physical sizes called ultra diffuse galaxies (UDGs) in clusters and, more recently, in lower density environments. As part of the Mass Assembly of early-Type GaLAxies with their fine Structures (MATLAS) survey, a deep imaging large program at the Canada-France-Hawaii Telescope (CFHT), our team has identified 2210 dwarf galaxies, 59 (~3%) of which qualify as UDGs. Averaging over the survey area, we find ~0.4 UDG per square degree. They are found in a range of low to moderate density environments, although 61% of the sample fall within the virial radii of groups. Based on a detailed analysis of their photometric and structural properties, we find that the MATLAS UDGs do not show significant differences from the traditional dwarfs, except from the predefined size and surface brightness cut. Their median color is as red as the one measured in galaxy clusters, albeit with a narrower color range. The majority of the UDGs are visually classified as dwarf ellipticals with log stellar masses of ~6.5 – 8.7. The fraction of nucleated UDGs (~34%) is roughly the same as the nucleated fraction of the traditional dwarfs. Only five (~8%) UDGs show signs of tidal disruption and only two are tidal dwarf galaxy candidates. A study of globular cluster (GC) candidates selected in the CFHT images finds no evidence of a higher GC specific frequency S N for UDGs than for classical dwarfs, contrary to what is found in most clusters. The UDG halo-to-stellar mass ratio distribution, as estimated from the GC counts, peaks at roughly the same value as for the traditional dwarfs, but spans the smaller range of ~10 – 2000. Finally, we interpret these results to mean that the large majority of the field-to-group UDGs do not have a different formation scenario than traditional dwarfs.

79 ASTRONOMY AND ASTROPHYSICS↗

Conditions for efficient and stable ion acceleration by moderate circularly polarized laser pulses at intensities of 10{sup 20} W/cm{sup 2}

Conditions for efficient and stable ion radiation pressure acceleration (RPA) from thin foils by circularly polarized laser pulses at moderate intensities are theoretically and numerically investigated. It is found that the unavoidable decompression of the co-moving electron layer in Light-Sail RPA leads to a change of the local electrostatic field from a ''bunching'' to a ''debunching'' profile, ultimately resulting in premature termination of ion acceleration. One way to overcome this instability is the use of a multispecies foil where the high-Z ions act as a sacrificial species to supply excess co-moving electrons for preserving stable acceleration of the lower-Z ion species. It is shown by 2D particle-in-cell simulations that 100 MeV/u monoenergetic C{sup 6+} ion beams are produced by irradiation of a Cu-C-mixed foil with laser pulses at intensities 5 x 10{sup 20} W/cm{sup 2}, which can be easily achieved by current day lasers.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electron acceleration by laser wakefield and x-ray emission at moderate intensity and density in long plasmas

The dynamics of electron acceleration by laser wakefield and the associated x-rays emission in long plasmas are numerically investigated for parameters close to the threshold of laser self-focusing. The plasma length is set by the use of dielectric capillary tubes that confine the gas and the laser energy. Electrons self-injection and acceleration to the 170 MeVs are obtained for densities as low as 5 x 10{sup 18} cm{sup -3} and a moderate input intensity (0.77 x 10{sup 18} W/cm{sup 2}). The associated x-ray emission at the exit of the capillary tube is shown to be an accurate diagnostic of the electrons self-injection and acceleration process.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Fluorescence modulation in single CdSe quantum dots by moderate applied electric fields

Single molecule time-resolved fluorescence spectroscopy of CdSe/ZnS core-shell quantum dots (QDs) under the influence of moderate applied electric fields reveals distributed emission from states which are neither fully on nor off and pronounced changes in the excited state decay. The data suggest that a 54 kV/cm applied electric field causes small perturbations to the QD surface charge distribution, effectively increasing the surface trapping probability and resulting in the appearance of gray states. We present simultaneous blinking and fluorescence decay results for two sets of QDs, with and without an applied electric field. Further kinetic modeling analysis suggests that a single trapped charged cannot be responsible for a blinking off event.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Silver antimony Ohmic contacts to moderately doped n-type germanium

A self doping contact consisting of a silver/antimony alloy that produces an Ohmic contact to moderately doped n-type germanium (doped to a factor of four above the metal-insulator transition) has been investigated. An evaporation of a mixed alloy of Ag/Sb (99%/1%) onto n-Ge (N{sub D}=1×10{sup 18} cm{sup −3}) annealed at 400 °C produces an Ohmic contact with a measured specific contact resistivity of (1.1±0.2)×10{sup −5} Ω-cm{sup 2}. It is proposed that the Ohmic behaviour arises from an increased doping concentration at the Ge surface due to the preferential evaporation of Sb confirmed by transmission electron microscope analysis. It is suggested that the doping concentration has increased to a level where field emission will be the dominate conduction mechanism. This was deduced from the low temperature electrical characterisation of the contact, which exhibits Ohmic behaviour down to a temperature of 6.5 K.

36 MATERIALS SCIENCE↗