Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “lithium anode”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Optimal Microstructure of Silicon Monoxide as the Anode for Lithium-Ion Batteries

Because of its metastable nature, silicon monoxide (SiO) consists of Si nanodomains in an amorphous matrix of SiO 2 . The microstructure of SiO, including SiO 2 , Si domains, and interphase (SiO x ) between domains, was modified via an annealing treatment in argon gas and thoroughly characterized by in-situ and ex-situ X-ray diffraction, pair distribution function, and electron energy loss spectroscopy. Two microstructure transformation routes were observed during the annealing process: (1) at a temperature of <800 °C, the annealing treatment was found to affect mainly the structural conformation of the amorphous SiO 2 matrix and the interphase, while (2) an annealing temperature of >800 °C led to significant Si nanodomain growth. Here, we found that the microstructure has a great impact on the electrochemical performance of SiO. The optimized microstructure of SiO appears to be achieved through annealing treatment at 800 °C or less, which results in interphase (SiO x ) reduction without causing significant Si domain growth. This work provides a deep insight into the domain and interphase transformation of SiO upon heat treatment. The improved understanding of the relationship between SiO microstructure and its electrochemical behavior will enable proper design and development of high-energy SiO for lithium-ion batteries.

25 ENERGY STORAGE↗
DOE OSTI2020

Hierarchical porous silicon structures with extraordinary mechanical strength as high-performance lithium-ion battery anodes

Abstract Porous structured silicon has been regarded as a promising candidate to overcome pulverization of silicon-based anodes. However, poor mechanical strength of these porous particles has limited their volumetric energy density towards practical applications. Here we design and synthesize hierarchical carbon-nanotube@silicon@carbon microspheres with both high porosity and extraordinary mechanical strength (>200 MPa) and a low apparent particle expansion of ~40% upon full lithiation. The composite electrodes of carbon-nanotube@silicon@carbon-graphite with a practical loading (3 mAh cm −2 ) deliver ~750 mAh g −1 specific capacity, <20% initial swelling at 100% state-of-charge, and ~92% capacity retention over 500 cycles. Calendered electrodes achieve ~980 mAh cm −3 volumetric capacity density and <50% end-of-life swell after 120 cycles. Full cells with LiNi 1/3 Mn 1/3 Co 1/3 O 2 cathodes demonstrate >92% capacity retention over 500 cycles. This work is a leap in silicon anode development and provides insights into the design of electrode materials for other batteries.

25 ENERGY STORAGE↗
DOE OSTI2020

Hybrid Nanostructured Ni(OH) 2 /NiO for High Capacity Lithium–ion Battery Anodes

A straightforward hydrothermal process followed by a controlled calcination technique is introduced for the synthesis of a Ni(OH) 2 modified NiO nanohybrid structure. Conversion materials as Li-ion battery anodes, NiO in this case, suffer from capacity fade and structural/morphological instability during lithiation and delithiation. The novelty of this work is in utilizing this hybrid configuration to increase the specific capacity and enable reversible electrochemistry. Here, we study the lithiation/delithiation process of NiO using a suite of spectroscopy and microscopy techniques from the atomic to electrode scale. We propose a mechanism for a reversible redox couple behavior of the NiO electrode by means of a hybrid Ni(OH)2/NiO structure. The ultimate objective of this work is to guide the development of anode with rationally-designed heterogeneity to create high capacity Li-ion batteries with excellent cycling and rate performance.

25 ENERGY STORAGE↗
DOE OSTI2021

Cycling-Induced Microstructural Changes in Alloy Anodes for Lithium-Ion Batteries

Abstract High-capacity electrochemical alloying materials, such as tin and tin-based alloys, present an opportunity for the advancement of lithium-ion batteries. However, the destructive effects of volumetric expansion must be mitigated in order to sustain this high capacity during extended cycling. One way to mitigate these effects is by alloying Sn with more malleable metals to accommodate the strain related to severe volumetric expansion. Ex situ X-ray microtomography data of cycled Cu6Sn5 pellets were used to quantify the microstructural changes that occur during lithiation and delithiation. The microtomography data were segmented into three distinct phases to evaluate phase size distributions, specific surface area, and tortuosity. Electrodes lithiated and then delithiated showed the most substantial reduction in overall phase sizes. This suggests that full lithiation of the Sn followed by partial delithiation of the Li4.4Sn to Li2CuSn can cause substantial microstructural changes related to volume expansion on lithiation and structural collapse upon delithiation. When considering other microstructural characteristics, this subset of the electrodes analyzed showed the highest tortuosity values. These results show that in addition to the mechanical degradation of the electrodes, excessive volume expansion can also influence transport networks in the active material and supporting phases of the electrode. While based on studies of the active–inactive alloy Cu6Sn5 for lithium-ion battery applications, the insights obtained are expected to be applicable to other alloy electrodes and battery chemistries.

Electrochemistry↗
DOE OSTI2024

Lignite-Derived Carbon Materials for Lithium-Ion Battery Anodes

This project involved collaboration between the University of North Dakota (UND) College of Engineering & Mines, Clean Republic, LLC (CR), and the North American Coal Corporation (NACoal) to develop advanced LIBs anodes from lignite-derived carbon materials. The overall goal of the project was to develop advanced anode materials for LIBs from lignite-derived carbon feedstocks.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2024

One-Step Spark Plasma Erosion Processing of Carbon-Coated Sn-Si Nanoparticles for Lithium-Ion Battery Anodes

High density portable energy storage is desirable owing to the energy requirements of portable electronics and electric vehicles. The Li-ion battery’s high energy density could be even further improved through the utilization of alternative materials (instead of carbon) for the anode, such as Sn or Si. Nonetheless, the large volume expansion upon lithiation, up to ~300% for Li 22 Si 5 , causes pulverization and rapid capacity degradation during cycling. Sn also forms a Li 22 Sn 5 compound with the equivalent stoichiometric Li capacity but with enhanced ductility. Nano-sized Si and Sn have demonstrated distinctive nanoscale properties, facilitating the retention of higher capacities, particularly when coated with carbon, which improves mechanical stability. To date, the methods of synthesizing coated Si, Sn, or Si-Sn alloyed nanoparticles are complicated, costly, and not readily scalable to meet the demands of cost-effective manufacturing. Spark plasma erosion in a hydrocarbon dielectric has been explored as a one-step process to produce Sn-Si alloy nanoparticles coated with a thin carbon film, offering a scalable and cost-effective processing route. The resulting Sn-Si particles exhibited a bi-modal size distribution at ~5 nm and ~500 nm and were carbon-coated, as intended, from the hydrocarbon dielectric breakdown. The spark-eroded nanoparticles were thoroughly characterized using TEM/EDS, XPS, AES, SSNMR, and TGA, and their improved electrochemical performance was assessed through half-cell experiments.

25 ENERGY STORAGE↗
DOE OSTI2021

Crosslinked functional binders and their use in silicon-containing anodes of lithium-ion batteries

A crosslinked polymer composition comprising: (i) a base polymer containing a multiplicity of at least one type of functional group selected from amino, amido, thiol, carboxylic acid, carboxylic acid ester, and epoxy groups; (ii) a multiplicity of hydroxylated benzene rings covalently linked to the base polymer, wherein each hydroxylated benzene ring contains at least two hydroxy groups, and with at least two of the hydroxy groups on said hydroxylated benzene rings being free as OH groups; and (iii) a multiplicity of crosslinking groups that crosslink at least two of said functional groups in the base polymer. The invention is also directed to lithium-ion batteries in which the above-described composition is incorporated in an electrode of the battery, and also directed to methods of operating a lithium-ion battery in which the above-described crosslinked polymer composition is incorporated in an electrode thereof.

Saito, Tsuguyuki↗