Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “light extraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Application of selected methods of remote sensing for detecting carbonaceous water pollution

A reach of the Houston Ship Channel was investigated during three separate overflights correlated with ground truth sampling on the Channel. Samples were analyzed for such conventional parameters as biochemical oxygen demand, chemical oxygen demand, total organic carbon, total inorganic carbon, turbidity, chlorophyll, pH, temperature, dissolved oxygen, and light penetration. Infrared analyses conducted on each sample included reflectance ATR analysis, carbon tetrachloride extraction of organics and subsequent scanning, and KBr evaporate analysis of CCl4 extract concentrate. Imagery which was correlated with field and laboratory data developed from ground truth sampling included that obtained from aerial KA62 hardware, RC-8 metric camera systems, and the RS-14 infrared scanner. The images were subjected to analysis by three film density gradient interpretation units. Data were then analyzed for correlations between imagery interpretation as derived from the three instruments and laboratory infrared signatures and other pertinent field and laboratory analyses.

Davis, E. M.↗
NASA NTRS1993

Spectral-Content Readout Of Birefringent Sensor

Stresses and strains measured optically at temperatures up to 2,000 degrees F. Spectrum of light processed through polarizer, sensor, analyzer, and associated optical components measured and processed to extract amount of retardation and, equivalently, stress-induced birefringence in sensor. Method offers same advantages as electrical strain sensors, including acquisition of data from multiple locations and under dynamic conditions. Additional advantage: immunity of fiber-optic transmission to interference by electromagnetic interference at radio and lower frequencies.

Redner, Alex S.↗
NASA NTRS1994

Optical-Correlator Neural Network Based On Neocognitron

Multichannel optical correlator implements shift-invariant, high-discrimination pattern-recognizing neural network based on paradigm of neocognitron. Selected as basic building block of this neural network because invariance under shifts is inherent advantage of Fourier optics included in optical correlators in general. Neocognitron is conceptual electronic neural-network model for recognition of visual patterns. Multilayer processing achieved by iteratively feeding back output of feature correlator to input spatial light modulator and updating Fourier filters. Neural network trained by use of characteristic features extracted from target images. Multichannel implementation enables parallel processing of large number of selected features.

Chao, Tien-Hsin↗
NASA NTRS1992

Size of metallic and polyethylene debris particles in failed cemented total hip replacements

Reports of differing failure rates of total hip prostheses made of various metals prompted us to measure the size of metallic and polyethylene particulate debris around failed cemented arthroplasties. We used an isolation method, in which metallic debris was extracted from the tissues, and a non-isolation method of routine preparation for light and electron microscopy. Specimens were taken from 30 cases in which the femoral component was of titanium alloy (10), cobalt-chrome alloy (10), or stainless steel (10). The mean size of metallic particles with the isolation method was 0.8 to 1.0 microns by 1.5 to 1.8 microns. The non-isolation method gave a significantly smaller mean size of 0.3 to 0.4 microns by 0.6 to 0.7 microns. For each technique the particle sizes of the three metals were similar. The mean size of polyethylene particles was 2 to 4 microns by 8 to 13 microns. They were larger in tissue retrieved from failed titanium-alloy implants than from cobalt-chrome and stainless-steel implants. Our results suggest that factors other than the size of the metal particles, such as the constituents of the alloy, and the amount and speed of generation of debris, may be more important in the failure of hip replacements.

Non-NASA Center↗
NASA NTRS2018

Surface Reconstruction of a Challenging Region with Permanent Shadows on the Moon

As the Earth is orbiting the Sun, there is the region a sunlight can't be reached on the Moon, a satellite of the Earth. Usually, the permanent shadows are located near a pole area and the surface reconstruction in the permanent shadows region is challenging because of the lack of sunlight.In this research, the reconstruction method containing the permanent shadows is suggested. To apply this method, the time-varying shadow region and a permanently shadowed region are needed to be separated. In the time-varying shadow region, the pixel intensity of the image can be composed of the albedo and the reflectance model. Using the light source direction from ISIS3 of USGS, the shape of the region can be extracted from the reflectance model. Though this region is visible in the camera, the change of illumination is quite large in this region, it is hard to reconstruct the shape using stereo-photogrammetry or SfS. So, it is needed of collecting more surface normal information from several pixel level-aligned images. In this process, the albedo information can be initialized and enhanced easily from many images.In the middle of permanent shadows, the high-resolution DEM is generated by LOLA DEM. The LOLA DEM is generated by interpolation between measured data point strips, the actual scene of the permanent shadows. Using the sensor like DIVINER, the Imaginary scene generation via a trained network between the sunlight sensor and other kinds of a sensor is suggested.

Moon, Sunghyun↗
DOE OSTI2024

ADRIANO2 Calorimeter performance from 2022 Prototypes

A novel high-granularity dual-readout calorimetric technique was developed as part of the T1604 collaboration research program. The building block of ADRIANO2 Calorimeter consists of a pair of optically isolated, small sized tiles made of scintillating plastic and lead glass. The two components of the dual-readout energy compensation technique. Furthermore,Cˇerenkovlightfromtheleadglassareexploitedtoforhighresolutiontimingmeasurements,whilehigh granularity from scintillating plastic can be used to probe the spatial component of the particle shower. This setup works for excellent energy resolution and particle identification for REDTOP as it is crucial for a calorimeter to detect and identify the decay products of eta/eta-prime mesons. Measurements were collected on several ADRIANO2 prototypes between February to December 2022 to evaluate the detector performance. The key metrics extracted from the analyses are presented in this paper are the efficiencies and light-yi eld for various tile configurations. The measured values will be used as input parameters for improved REDTOP Montecarlo simulation.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2025

Third-order photon correlations extract single-nanocrystal multiexciton properties in solution

Colloidal semiconductor nanocrystals are considered promising materials for high-flux optical applications, including lasing, light-emitting diodes, biological imaging, and quantum optics. In high-flux applications, multiexcitons can significantly contribute to emission, influencing its brightness, spectral purity, and kinetics. As a result, understanding and controlling multiexciton emission in colloidal nanocrystal materials is of the utmost importance. In the past, single-nanocrystal photon correlation methods have been applied to understand biexciton and triexciton efficiencies, lifetimes, and spectra. While powerful, such methods suffer from user selection bias and require stable emission from single nanocrystals. To compensate for this shortcoming, second-order correlation methods were developed to extract sample-averaged biexciton properties from a solution of nanocrystals. Until now, however, the analogous third-order solution photon correlation methods remained unexplored. In this work, we present a pair of third-order photon correlation techniques to obtain the sample-averaged single-nanocrystal triexciton quantum yield and lifetime in a solution-phase experiment. These techniques derive from the relationship between the Poisson probability of nanocrystal photon absorption and the intrinsic probability of nanocrystal photon emission. We validate the theoretical background of these techniques by creating a numerical model to simulate the diffusion and emission of many nanocrystals in solution. Our simulations confirm that the average triexciton quantum yield and triexciton lifetime can be extracted from a solution of nanocrystals. These techniques will enable researchers to gain a better understanding of the fundamental multiexciton properties of colloidal nanocrystals.

Horowitz, Jonah R. [Massachusetts Institute of Tec↗
DOE OSTI2024

Velocity reconstruction in the era of DESI and Rubin/LSST. II. Realistic samples on the light cone

Reconstructing the galaxy peculiar velocity field from the distribution of large-scale structure plays an important role in cosmology. On one hand, it gives us an insight into structure formation and gravity; on the other, it allows us to selectively extract the kinetic Sunyaev-Zel’dovich (kSZ) effect from cosmic microwave background maps. In this work, we employ high-accuracy synthetic galaxy catalogs on the light cone to investigate how well we can recover the velocity field when utilizing the three-dimensional spatial distribution of the galaxies in a modern large-scale structure experiment such as the Dark Energy Spectroscopic Instrument (DESI) and the Rubin Observatory Legacy Survey of Space and Time. In particular, we adopt the standard technique used in baryon acoustic oscillation analysis for reconstructing the Zel’dovich displacements of galaxies through the continuity equation, which yields a first-order approximation to their large-scale velocities. We investigate variations in the number density, bias, mask, area, redshift noise, and survey depth, as well as modifications to the settings of the standard reconstruction algorithm. Since our main goal is to provide guidance for planned kSZ analysis between DESI and the Atacama Cosmology Telescope, we apply velocity reconstruction to a faithful representation of DESI spectroscopic and photometric targets. We report the cross-correlation coefficient between the reconstructed and the true velocities along the line of sight. For the DESI Y1 spectroscopic survey, we expect the correlation coefficient to be r ≈ 0.64, while for a photometric survey with δ z /(1+z) = 0.02, as is approximately the case for the Legacy Survey used in the target selection of DESI galaxies, r shrinks by half to r ≈ 0.31. Here, we hope the results in this paper can be used to inform future kSZ stacking studies and other velocity reconstruction analyses planned with the next generation of cosmology experiments.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Component-based SHGC determination of BIPV glazing for product comparison

Building-integrated photovoltaic (BIPV) systems are intrinsically designed to generate electricity and to provide at least one building-related function. When BIPV modules act as glazing products in windows, skylights or curtain walls, their ability to control the transmission of solar energy into the building must be characterised by a Solar Heat Gain Coefficient (SHGC) or g value (also known as Total Solar Energy Transmittance – TSET – or “solar factor”). For the comparison of BIPV glazing products consisting of one PV laminate and possibly further, conventional glazing layers separated by gas-filled cavities, the procedures documented in international standards for architectural glazing (e.g. ISO 9050 and EN 410) form a suitable starting point. Easily implemented modifications to these procedures are proposed to take both optical inhomogeneity (if relevant) and extraction of electricity from BIPV glazing units into account. Geometrically complex glazing and shading devices, and light-scattering glazing layers, are outside the scope of the proposed methodology; SHGC determination for obliquely incident solar radiation is also excluded. For these cases, the experimental calorimetric approach documented in [ISO 19467:2017; ISO 19467-2:2021] is recommended. The paper also presents results and conclusions from an implementation exercise and sensitivity study carried out by participants of the IEA-PVPS Task 15 on BIPV. The cell coverage ratio in the PV laminate, the thermal resistance offered by the glazing configuration, the choice of boundary conditions and the effect of extracting electricity were all identified as parameters which significantly affect the SHGC value determined for a given type of BIPV glazing. A practicable approach to accommodate the great variety of dimensions typical for BIPV glazing is also proposed. These findings should pave the way for modifying the existing component-based standards for architectural glazing to take the specific features of BIPV glazing into account.

14 SOLAR ENERGY↗
DOE OSTI2022

LeTID-Affected Cells from a Utility-Scale Photovoltaic System Characterized by Deep Level Transient Spectroscopy

Photovoltaic modules from a utility-scale field experienced power loss by light- and elevated temperature-induced degradation (LeTID). Samples of one of the affected monocrystalline silicon cells were cored and extracted from the module packaging and encapsulation. One of the cell fragments was processed using a regeneration cycle of applying short-circuit-rated current in forward bias at 85 degrees C for 2 weeks, while the other fragment was kept in its outdoor-degraded LeTID state. Both samples were scribed to form 2-mm diameter isolated areas using a femtosecond-pulse-width laser micromachining system. Both isolated areas contained front grid line segments which were wire bonded to larger contact pads, and the samples were probed in a cryostat linked to a deep-level transient spectroscopy (DLTS) system. Using DLTS, a majority-carrier, hole-trap defect was detected on each sample with an activation energy of 0.42 eV. The LeTID-degraded sample, however, had a larger signal corresponding to a trap density of 1.1x10^13 cm-3, which was about five times larger than the 2.1x10^12 cm-3 trap density of the regenerated sample.

charge carrier lifetime↗
NASA NTRS1976

Effects of tidal distortion on binary-star velocity curves and ellipsoidal variation

Radial velocity curves for the more massive components of binaries with extreme mass ratios can show a large distortion due to tides, as first recognized by Sterne. Binaries in which the effect is large should be rare because nearly all such binaries would be in the rapid phase of mass transfer. However, the optical counterparts of some X-ray binaries may show the effect, which would then serve as a new means of extracting considerable information from the observations. The essential parts of the computational procedure are given. Light curves for ellipsoidal variables with extreme mass ratios were also computed, and were found to be less sinusoidal than those with normal mass ratios.

Wilson, R. E.↗
NASA NTRS1989

Effect of abrupt pressure gradients on the structure of turbulent boundary layers

The structure of a turbulent boundary layer due to abruptly applied strong favorable and adverse pressure gradients, leading to relaminarization and separation, respectively, is considered. Digital image enhancement techniques have been applied to laser light sheet smoke flow visualization pictures. A 'local range modification' technique has been used to extract structural details otherwise lying ill-defined in the fully turbulent core. The cross-stream sections immediately prior to separation, and particularly those shortly after the application of the favorable pressure gradient, are vividly organized; there exists a criss-cross pattern in the spanwise plane with a mean orientation at about +/- 45 deg to the vertical.

Bandyopadhyay, Promode R.↗
NASA NTRS1992

Automatic target recognition using a feature-based optical neural network

An optical neural network based upon the Neocognitron paradigm (K. Fukushima et al. 1983) is introduced. A novel aspect of the architectural design is shift-invariant multichannel Fourier optical correlation within each processing layer. Multilayer processing is achieved by iteratively feeding back the output of the feature correlator to the input spatial light modulator and updating the Fourier filters. By training the neural net with characteristic features extracted from the target images, successful pattern recognition with intra-class fault tolerance and inter-class discrimination is achieved. A detailed system description is provided. Experimental demonstration of a two-layer neural network for space objects discrimination is also presented.

Chao, Tien-Hsin↗
NASA NTRS2012

Height and Biomass of Mangroves in Africa from ICEsat/GLAS and SRTM

The accurate quantification of forest 3-D structure is of great importance for studies of the global carbon cycle and biodiversity. These studies are especially relevant in Africa, where deforestation rates are high and the lack of background data is great. Mangrove forests are ecologically significant and it is important to measure mangrove canopy heights and biomass. The objectives of this study are to estimate: 1. The total area, 2. Canopy height distributions and 3. Aboveground biomass of mangrove forests in Africa. To derive mangrove 3-D structure and biomass maps, we used a combination of mangrove maps derived from Landsat ETM+, LiDAR canopy height estimates from ICEsat/GLAS (Ice, Cloud, and land Elevation Satellite/Geoscience Laser Altimeter System) and elevation data from SRTM (Shuttle Radar Topography Mission) for the African continent. More specifically, we extracted mangrove forest areas on the SRTM DEM using Landsat based landcover maps. The LiDAR (Light Detection and Ranging) measurements from the large footprint GLAS sensor were used to derive local estimates of canopy height and calibrate the Interferometric Synthetic Aperture Radar (InSAR) data from SRTM. We then applied allometric equations relating canopy height to biomass in order to estimate above ground biomass (AGB) from the canopy height product. The total mangrove area of Africa was estimated to be 25 960 square kilometers with 83% accuracy. The largest mangrove areas and greatest total biomass was 29 found in Nigeria covering 8 573 km2 with 132 x10(exp 6) Mg AGB. Canopy height across Africa was estimated with an overall root mean square error of 3.55 m. This error also includes the impact of using sensors with different resolutions and geolocation error which make comparison between measurements sensitive to canopy heterogeneities. This study provides the first systematic estimates of mangrove area, height and biomass in Africa. Our results showed that the combination of ICEsat/GLAS and SRTM data is well suited for vegetation 3-D mapping on a continental scale.

Fatoyinbo, Temilola E.↗
NASA NTRS2023

Soluble Organic Matter Molecular Atlas of Ryugu Reveals Cold Hydrothermalism on C-Type Asteroid Parent Body

The sample from the near-Earth carbonaceous asteroid (162173) Ryugu is analyzed in the context of carbonaceous meteorites soluble organic matter. The analysis of soluble molecules of samples collected by the Hayabusa2 spacecraft shines light on an extremely high molecular diversity on the C-type asteroid. Sequential solvent extracts of increasing polarity of Ryugu samples are analyzed using mass spectrometry with complementary ionization methods and structural information confirmed by nuclear magnetic resonance spectroscopy. Here we show a continuum in the molecular size and polarity, and no organomagnesium molecules are detected, reflecting a low temperature and water-rich environment on the parent body approving earlier mineralogical and chemical data. High abundance of sulfidic and nitrogen rich compounds as well as high abundance of ammonium ions confirm the water processing. Polycyclic aromatic hydrocarbons are also detected in a structural continuum of carbon saturations and oxidations, implying multiple origins of the observed organic complexity, thus involving generic processes such as earlier carbonization and serpentinization with successive low temperature aqueous alteration.

Asteroids, comets and Kuiper belt↗
DOE OSTI2022

2021 NIRT Mini Drill (After Action Report)

During the summer and fall of 2021, several functional area drills were held that focused on exercising Consequence Management’s (CM) ability to extract and use data from RadResponder for the purpose of answering intermediate-phase questions presented as technical inject requests for information (RFI) in Sandia National Laboratories (SNL) Consequence Management Operational System (COSMOS) software. The scenario chosen was that of Northern Lights 2016 (NL16) which was a large-scale nuclear power plant (NPP) release exercise in the state of Minnesota. The NL16 data was extracted from the Radiological Assessment and Monitoring System (RAMS) event where it was created and was reformatted for implanting to a new RadResponder event. Next, the beta-version of a laboratory sample data simulator was used to generate more sample data that was injected to the event. Five “mini-drills” were devised with each prompt defined by a data-based need. For each drill, a team of assessment and NARAC scientists worked the problem using the drill prompt and the available data in RadResponder. The teams held a kickoff meeting, had several days to work the problem, and then reported their results as well as observations in a hotwash. Several areas for improvement in both the software and process were identified during the course of these drills. This report will document the process of addressing each RFI and the discovered gaps in both software capability and methodology so that they can be considered for future development and investment by the CM and NIRT programs.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗
DOE OSTI2020

Rare earth metals from secondary sources: Review of potential supply from waste and byproducts

Current concerns about lack of diversity in supply of critical metals have spurred research into utilizing domestic sources, particularly from waste streams. Sustainability strategies like urban mining, industrial symbiosis, and the circular economy suggest avenues to realize new supplies of critical metals. In this work we explore the resource and economic potential for extracting rare earth elements (REEs) from industry byproducts (e.g. coal combustion products, red mud) and secondary sources (e.g. waste electronics and light bulbs). Combining materials flow analysis and characterization data, we find that while REE concentrations in waste and byproduct streams are mostly much lower than current REE ores, some secondary sources are richer than ores in high value REEs such as scandium. The quantities of REEs contained in secondary sources could meet current global demand even with low extraction yield rates. Phosphogypsum, coal ash and red mud from aluminum production stand out as promising candidates for recovery due to high concentrations of valuable REEs and sufficient quantities to potentially meet demand. Processes to extract REEs from secondary sources are under development, it is not clear yet which will be profitable at scale and which can be achieved at least environmental impact. This work provides high level guidance on the potential of secondary sources by characterizing quality (concentrations of different rare earths) and quantity (mass of rare earths in global scale wastes and byproducts). This significant first step helps clarify directions for policy and research and development investments.

42 ENGINEERING↗
DOE OSTI2025

Measuring short-range correlations and quasi-elastic cross sections in A(e,e’) at x > 1 and modest Q 2

We present results from the Jefferson Lab E08-014 experiment, investigating short-range correlations (SRC) through measurements of inclusive quasi-elastic scattering from 2 H, 3 He, 4 He, 12 C, 40 Ca, and 48 Ca. The kinematics were selected to isolate scattering from SRCs, yielding a plateau in the A/ 2 H cross-section ratios due to the universal two-body structure of the 2N-SRCs in light and heavy nuclei. We observe approximate plateaus in the A/ 2 H ratios and provide the first extractions of the A/ 2 H ratio for 40 Ca and 48 Ca. We also examine the A/ 3 He ratio, aiming to identify three-nucleon SRCs (3N-SRCs). Following the approach for isolating 2N-SRCs, searching for 3N-SRC dominance involved measuring the A/ 3 He cross section ratio at modest-to-large Q 2 values and looking for a plateau ratios for x ≳ 2.5. This was not observed in the data, and in fact increasing Q 2 values moved the data further away from the predicted plateau. We show here that, when analyzed in terms of the struck nucleon’s light-cone momentum, the data exhibited the expected trend, progressively approaching the predicted 3N-SRC plateau. These observations suggest that future measurements at higher energies may facilitate a definitive isolation and identification of 3N-SRCs.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗