Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “integration cost”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Depletion capabilities in the OpenMC Monte Carlo particle transport code

A depletion solver has been implemented in OpenMC and is described herein. The depletion solver is implemented in Python and interfaces with OpenMC’s transport solver through a C++ application programming interface, which enables an in-memory transport-depletion coupling. Multiple integration methods for advancing in time have been implemented and exhibit tradeoffs in cost, accuracy, and memory use. For all time integration methods, evaluation of the matrix exponential is performed by using the incomplete partial fraction form of the Chebyshev rational approximation method. Simulations of a pressurized water reactor (PWR) pincell and a sodium-cooled fast reactor (SFR) assembly were carried out with OpenMC and Serpent. For both problems, the use of a high-fidelity depletion chain results in predictions of k eff that agree within 20–30 pcm between OpenMC and Serpent. Predicted actinide concentrations were found to agree to a fraction of a percent, and most fission product concentrations were found to agree within 1%. Here, the few cases where larger differences were observed can be attributed either to differences in how the energy dependence of fission product yields is handled or deficiencies in the nuclear data used. OpenMC simulations of the PWR and SFR problems using a simplified 228-nuclide depletion chain demonstrate that it achieves accuracy close to that of the full, high-fidelity depletion chain with respect to the studied responses.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

The value of integrating a geothermal district heating system into a microgrid

As electrical grids increasingly rely on variable renewable energy, maintaining reliability and cost efficiency becomes more complex. To address these challenges, this study analyzed the integration of geothermal district heating as a grid-responsive thermal resource within a microgrid in Tuttle, Oklahoma. Building energy modeling using EnergyPlus estimated annual district heating demand at 2.9 GWh, with a peak load of 2.8 MW th . Techno-economic analyses were conducted to meet the heating demand under three geothermal scenarios, varying by production depth, flow rate, and thermal output, each supplemented by natural gas peaking boilers. In parallel, equivalent electrical load profiles were developed using typical coefficients of performance (COPs) for air-source heat pumps and electric boilers to establish an electrified baseline scenario. A complete end-use electrical load profile was also developed for the microgrid using Cambium dataset. The modeling results demonstrated reliable and economic operation of the geothermal systems over 30 years, with COPs ranging from 2.6 to 8.9 and the lowest levelized heating cost at $\$$54.6/MWh. Geothermal integration reduced electricity consumption by up to 94.7 % compared to the non-geothermal base case, yielding annual energy savings of up to $\$$803 k. Avoided grid costs ranged from $\$$65 k–$\$$147 k per year, with individual events avoiding up to $\$$4,863 per hour. Grid-responsive operation further reduced wholesale energy costs by 53–56 %. These findings demonstrate geothermal heating, traditionally treated as a non-grid-responsive thermal resource, can be reconfigured to support dynamic grid services, offering a scalable pathway to enhance reliability and reduce costs in renewable-rich microgrids and district heating networks.

15 GEOTHERMAL ENERGY↗
DOE OSTI2020

High-Speed Active Integrators for Magnetic Probes

This report discusses a low cost, easy to develop instrument to measure magnetic fields in pulsed solenoids used for the MagNIF pulse power system. The instrument is designed to integrate voltage signals from custom B-dot probes made from PCB inductor chips. The instrument is battery powered with ± 9V rails. Acceptable B-dot probe inputs range from mV to 20V with frequencies up to 4MHz. Details of the circuit design and practical considerations for working with high speed signals are discussed.

42 ENGINEERING↗
DOE OSTI2026

Power Electronic Development Challenges for High Power Density Integrated Electric Drive Applications

The ever-increasing demand for compact, efficient, and high-performance traction drive systems for transportation applications has accelerated the development of integrated electric drives. In these systems, the electric machine and inverter are integrated within a single housing, offering significant advantages in electrical performance, volume, weight, cost, and overall system efficiency. Despite these benefits, such high levels of integration introduce a new set of challenges, particularly in power electronic design and component selection. This article presents an in-depth investigation of a highly integrated electric drive architecture with an internal stator-mounted inverter, highlighting key design considerations and trade-offs aimed exclusively at maximizing system power density.Based on a comprehensive review of the literature, the power density of a voltage-source-inverter-driven electric drive is primarily governed by the volumetric contributions of the power modules, heat sinks, and DC-link capacitors. Accordingly, this work focuses on the optimization of these three critical components to enhance the inverter's overall power density. The proposed design achieves a power density of 100 kW/L, demonstrating the effectiveness of the presented approach for next-generation integrated electric drive systems.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2022

Integrated Capture and Conversion of CO 2 to Methanol in a Post‐Combustion Capture Solvent: Heterogeneous Catalysts for Selective CN Bond Cleavage

Abstract An efficient and selective heterogeneous catalyst is identified for the condensed‐phase hydrogenation of captured CO 2 in the presence of an advanced water‐lean post‐combustion capture solvent, ( N ‐(2‐EthoxyEthyl)‐3‐MorpholinoPropan‐1‐Amine), 2‐EEMPA. The catalysts commonly used for gas‐phase CO 2 hydrogenation (e.g., Cu/Zn/Al 2 O 3 ) cause deactivation of amine promoters via N ‐methylation by CO cleavage of formamide intermediates. A heterogeneous catalyst system that suppresses N ‐methylation of amine solvents is identified, demonstrating how Pt, supported by reducible metal oxides CeO 2 or TiO 2 , can be selective for CN cleavage to produce methanol. This is the first known demonstration of integrated low‐temperature thermocatalytic capture and conversion of CO 2 to methanol in an economically viable CO 2 capture solvent. Technoeconomic analyses performed on the state‐of‐technology suggest that methanol can be produced with a minimum selling price of $4.4/gallon ($1,460/metric ton) when using CO 2 captured from a 650 MW natural gas combined cycle plant. Ultimately, a road map of how realistic and achievable improvements to space velocity and methanol selectivity of this integrated process can enable near cost parity to fossil‐derived methanol, with a selling price of ≈$1.4/gal ($470/metric ton), is presented.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Manufacturing and characterization of continuous fiber-reinforced thermoplastic tape overmolded long fiber thermoplastic

Light-weight construction, design freedom, integration of functions, and compelling cost element are desired by Original Equipment Manufacturers (OEMs) and their suppliers. The emergence of overmolding of continuous-discontinuous reinforcement enables design freedom and ability to tailor stiffness, strength, and damage tolerance for structural applications. In this work, long fiber thermoplastics (LFT) are overmolded with continuous fiber-reinforced thermoplastic (CFRTP) tape are combined using extrusion compression molding process to evaluate the structural performance. The CFRTP tape overmolded LFT samples were characterized using nondestructive and destructive techniques to track fiber alignment, fiber distribution, manufacturing defects, interfacial bonding of the tape – LFT and effect of CFRTP tape on LFT. Mode 1 fracture toughness, G 1c for tape overmolded LFT was higher by 25–30% compared to literature reported G 1c . This response was attributed to excellent fiber distribution, good fiber wetting, and absence of voids at the interface. Three-point bend test indicated that CFRTP tape overmolded LFT composites were better able to resist damage under the bending load compared to constituent LFT composite. Flexural strength of the overmolded composite was higher by 119–142%, and modulus higher by 77–65% compared to constituent LFT composite. Simulated flexural results accurately represents the mechanical behavior of composites. Here, the penetration energy of tape overmolded LFT composites determined by LVI test was in the range of 27.66–30.15 J, which is significantly higher than constituent LFT composite, 7.76 J. CFRTP tape overmolded LFT composite exhibits progressive fiber fracture, matrix cracking, and interfacial debonding failure, whereas, constituent LFT composite showed catastrophic fiber fracture.

42 ENGINEERING↗
DOE OSTI2022

Context and mitigation of lost circulation during geothermal drilling in diverse geologic settings

Lost circulation is one of the most common and expensive problems facing geothermal energy development, representing up to 30% of drilling costs. We examined drilling records from four geothermal fields—McGinness Hills in central Nevada, Don A. Campbell and Steamboat Hills in western Nevada, and Puna Geothermal Venture on the Big Island of Hawai'i— to identify geologies most prone to lost circulation, as well as common mitigation strategies. Depths of lost circulation events varied, but their frequency often increased in the production interval. Lost circulation commonly occurred near fault intersections, and heavily faulted fields like McGinness Hills and Don A. Campbell showed secondary mineralization within approximately 100 m (328 ft) or less of where circulation was lost. Lost circulation mitigation strategies included using locally available materials (e.g., cotton seed hulls) as well as more expensive proprietary lost circulation materials, cement plugs above the reservoir, and drilling blind with aerated, polymer-based mud in the production zone. Addressing lost circulation using a well thought out decision-making approach and materials above the reservoir will save time and cost, and provide needed well integrity. Mitigation often requires a series of steps, typically applied from perceived least expensive to most, and are dependent on the severity and location in the well where circulation was lost and availability of materials. Placing cement plugs can cure lost circulation events, however these plugs are often expensive, time-consuming, and may not be successful.

15 GEOTHERMAL ENERGY↗
DOE OSTI2023

Piezo-electrocatalytic oxidation of methanol with UV-ozone treated wurtzite zinc oxide nanostructures

Leveraging mechanically-induced piezoelectric polarization, piezocatalysis emerges as a viable mechanism for enhancing the efficiency of catalytic processes. Nanostructured, catalytically active, rationally designed piezoelectric semiconductors can achieve high-performance catalysts for various applications using cost-effective electrocatalytic pathways, such as mechanical stimuli. We design and demonstrate for the first time a cost-effective, high-performance piezo-electrocatalyst for anodic methanol oxidation, which is crucial for the practical application and deployment of direct methanol fuel cells in a variety of emerging clean energy technologies. We synthesized wurtzite ZnO nanorods and nanosheets treated with UV-O 3 to characterize and compare their efficacy for piezo-electrocatalytic methanol oxidation. The generation of piezoelectric polarization charges in nanostructured semiconducting ZnO catalysts significantly increased their electrocatalytic performance. By elucidating the charge transfer between mechanically-deformed ZnO nanostructures and methanol molecules, we identified the underlying mechanism for the piezo-electrocatalytic process for methanol oxidation. The facile synthesis of high-quality ZnO nanostructures enables low-cost, scalable manufacture and direct integration into electrocatalysts whose performance could be enhanced by harvesting mechanical energy that would otherwise be wasted in the working environment.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2020

Parameterizing Perennial Bioenergy Crops in Version 5 of the Community Land Model Based on Site‐Level Observations in the Central Midwestern United States

Abstract With projected expansion of biofuel production at a global scale, there is a pressing need to develop adequate representation of bioenergy crops in land surface models to help effectively quantify the biogeophysical and biogeochemical effects of its associated land use changes. This study implements two new perennial bioenergy crops, Miscanthus and switchgrass, into the Community Land Model Version 5 based on site‐level observations from the midwestern United States by modifying parameters associated with photosynthesis, phenology, allocation, decomposition, and carbon cost of nitrogen uptake and integrating concomitantly land management practices. Sensitivity analyses indicate that carbon and energy fluxes of the perennial crops are most sensitive to photosynthesis and phenology parameters. Validation of simulated fluxes against site‐level measurements demonstrates that the model is capable of capturing the overall patterns of energy and carbon fluxes, as well as physiological transitions from leaf emergence to senescence. Compared to annual crops, perennial crops feature longer growing season, greater leaf areas, and higher productivity, leading to increased transpiration, lower annual runoff, and larger carbon uptake. The model simulations suggest that with higher CO 2 assimilation rates and lower demands for nutrients and water, high‐yielding perennial crops are promising alternatives of bioenergy feedstocks compared to traditional annual crops not only for mitigating climate change but also for environmental conservation purposes by reducing fertilizer application and therefore alleviating surface‐ and ground‐water contaminations. Although the local‐scale simulations shed light on potential benefits of using perennial grasses as bioenergy feedstocks, quantifying consequences of their plantations at larger scales warrants additional investigation.

Cheng, Yanyan↗
DOE OSTI2020

Convergence acceleration of Monte Carlo many-body perturbation methods by direct sampling

In the Monte Carlo many-body perturbation (MC-MP) method, the conventional correlation-correction formula, which is a long sum of products of low-dimensional integrals, is first recast into a short sum of high-dimensional integrals over electron-pair and imaginary-time coordinates. These high-dimensional integrals are then evaluated by the Monte Carlo method with random coordinates generated by the Metropolis–Hasting algorithm according to a suitable distribution. The latter algorithm, while advantageous in its ability to sample nearly any distribution, introduces autocorrelation in sampled coordinates, which in turn increases the statistical uncertainty of the integrals and thus the computational cost. It also involves wasteful rejected moves and an initial “burn-in” step as well as displays hysteresis. Here, an algorithm is proposed that directly produces a random sequence of electron-pair coordinates for the same distribution used in the MC-MP method, which is free from autocorrelation, rejected moves, a burn-in step, or hysteresis. Furthermore, this direct-sampling algorithm is shown to accelerate second- (MC-MP2) and third-order Monte Carlo many-body perturbation (MC-MP3) calculations by up to 222% and 38%, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Thermal Management System of an Outer-Rotor-Motor-Based Traction Drive With Integrated Power Electronics in its Central Cavity

Increasing power densities of electric vehicle traction drive systems necessitates combining the electric motor and the power electronics into one unit. A compact, integrated traction drive unit with fewer components also drives production costs down, enabling wider adoption of electric vehicles. However, the integration of power electronics in the electric machine is associated with challenges of designing an effective thermal management solution for the combined traction drive system. This paper focuses on the thermal management approach selected for Oak Ridge National Laboratory’s outer-rotor-motor-based integrated traction drive and evaluates its potential performance. The outer-rotor-motor configuration provided an opportunity for integration of the six-phase inverter in the available space in the central cavity of the internal stator. A cylindrical inverter enclosure with integrated coolant (water-ethylene glycol) channels in its walls was designed to enable heat removal from the power electronics. Numerical thermal-fluid modeling and initial channel/fin optimization results for the cylindrical heat sink are presented here. As permanent magnets are integrated in a high-speed (20 000 RPM) outer rotor, forced air convection provides cooling for the magnets. The magnets were segmented axially to mitigate the eddy current losses. Heat generated in the stator windings and laminations is removed by water-ethylene glycol coolant circulating in interpolar T-shape ceramic heat exchangers inserted between windings. General design concepts and numerical thermal-fluid simulations illustrating the electric motor thermal management solution are also presented.

Kekelia, Bidzina↗
DOE OSTI2025

C4.jl [SWR-25-106]

A proof-of-concept software framework for integrating capacity expansion and production cost optimization with probabilistic resource adequacy assessment and sending feedback signals between the models.

Stephen, Gordon [National Renewable Energy Laborat↗
DOE OSTI2021

WaterTAP 0.3 Release

The Water treatment Technoeconomic Assessment Platform (WaterTAP) is an open-source Python-based software package that supports the simulation and optimization of process-scale water treatment trains. WaterTAP seeks to provide the broader water research community with an integrated modeling capability to evaluate cost, energy, and environmental tradeoffs across water treatment options and identify high impact opportunities for innovation including novel materials, processes, and systems. An updated version of WaterTAP is released quarterly and each includes documentation and release notes.

IDAES↗
DOE OSTI2022

WaterTAP 0.4 Release

The Water treatment Technoeconomic Assessment Platform (WaterTAP) is an open-source Python-based software package that supports the simulation and optimization of process-scale water treatment trains. WaterTAP seeks to provide the broader water research community with an integrated modeling capability to evaluate cost, energy, and environmental tradeoffs across water treatment options and identify high impact opportunities for innovation including novel materials, processes, and systems. An updated version of WaterTAP is released quarterly and each includes documentation and release notes.

IDAES↗
DOE OSTI2022

WaterTAP 0.5 Release

The Water treatment Technoeconomic Assessment Platform (WaterTAP) is an open-source Python-based software package that supports the simulation and optimization of process-scale water treatment trains. WaterTAP seeks to provide the broader water research community with an integrated modeling capability to evaluate cost, energy, and environmental tradeoffs across water treatment options and identify high impact opportunities for innovation including novel materials, processes, and systems. An updated version of WaterTAP is released quarterly and each includes documentation and release notes.

IDAES↗
DOE OSTI2022

WaterTAP 0.6 Release

The Water treatment Technoeconomic Assessment Platform (WaterTAP) is an open-source Python-based software package that supports the simulation and optimization of process-scale water treatment trains. WaterTAP seeks to provide the broader water research community with an integrated modeling capability to evaluate cost, energy, and environmental tradeoffs across water treatment options and identify high impact opportunities for innovation including novel materials, processes, and systems. An updated version of WaterTAP is released quarterly and each includes documentation and release notes.

IDAES↗
DOE OSTI2022

WaterTAP 0.7 Release

The Water treatment Technoeconomic Assessment Platform (WaterTAP) is an open-source Python-based software package that supports the simulation and optimization of process-scale water treatment trains. WaterTAP seeks to provide the broader water research community with an integrated modeling capability to evaluate cost, energy, and environmental tradeoffs across water treatment options and identify high impact opportunities for innovation including novel materials, processes, and systems. An updated version of WaterTAP is released quarterly and each includes documentation and release notes.

IDAES↗