Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “infiltration”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
DOE OSTI2014

Mobility of heavy metals through granitic soils using mini column infiltration test

This study is about the mobility of cadmium through compacted granitic soils. Two granitic soils namely the Broga (BGR) and Kajang (KGR) granitic soils were collected in Selangor, Malaysia. Physical and chemical tests were applied for both granitic soils to determine the physical and chemical properties of soil materials. Physical test results shows granitic soils (BGR and KGR) have high percentage of sand ranging between 54%–63% and 46%–54% respectively, an intermediate and intermediate to high plasticity index as well as high specific gravity ie; 2.50–2.59 and 2.45–2.66 respectively. For chemical test, granitic soils shows acidic pH values ranged from 5.35–5.85 for BGR and pH 5.32–5.54 for KGR. For organic matter, SSA and CEC test, it shows low values ranged from 0.22%–0.34% and 0.39%– 0.50% respectively for organic matter test, 17.96 m{sup 2}/g–21.93 m{sup 2}/g and 25.76 m{sup 2}/g–26.83 m{sup 2}/g respectively for SSA test and 0.79 meq/100g–1.35 meq/100g and 1.31 meq/100g–1.35 meq/100g respectively for CEC test. Mini column infiltration test was conducted to determine the retention of cadmium while flowing through granite soils. This test conducted based on the falling head permeability concepts. Different G-force ranging from 231G to 1442G was used in this test. The breakthrough curves show the concentration of Cd becomes higher with the increasing of G-force for both granitic samples (BGR and KGR). The selectivity sorption for both granites ranked in the following decreasing order of; 231G>519G>923G>1442G. Results demonstrated that granitic soils also have low buffering capacity due to low resist of pH changes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2019

The chemical physics of sequential infiltration synthesis—A thermodynamic and kinetic perspective

Sequential infiltration synthesis (SIS) is an emerging materials growth method by which inorganic metal oxides are nucleated and grown within the free volume of polymers in association with chemical functional groups in the polymer. SIS enables the growth of novel polymer-inorganic hybrid materials, porous inorganic materials, and spatially templated nanoscale devices of relevance to a host of technological applications. Although SIS borrows from the precursors and equipment of atomic layer deposition (ALD), the chemistry and physics of SIS differ in important ways. These differences arise from the permeable three-dimensional distribution of functional groups in polymers in SIS, which contrast to the typically impermeable two-dimensional distribution of active sites on solid surfaces in ALD. In SIS, metal-organic vapor-phase precursors dissolve and diffuse into polymers and interact with these functional groups through reversible complex formation and/or irreversible chemical reactions. In this perspective, we describe the thermodynamics and kinetics of SIS and attempt to disentangle the tightly coupled physical and chemical processes that underlie this method. Here, we discuss the various experimental, computational, and theoretical efforts that provide insight into SIS mechanisms and identify approaches that may fill out current gaps in knowledge and expand the utilization of SIS.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Alumina-based filters made via binder jet 3D printing of alumina powder, colloidal silica infiltration, and sintering

Alumina-based, porous filter media was made via a binder jet 3D printing process consisting of an alumina powder printing step with subsequent heating, colloidal silica infiltration, drying, and sintering to consolidate particles yet retain a net open porous microstructure. The composites made were alumina-silica or alumina-mullite, where the silica sintering aid was used to densify and join the alumina particles. The resulting composite structures had open porosities in the 25–31 vol% range as measured by Archimedes density. Pressure drops were measured across the filter media at constant flow rates to compare disc shapes and complex, 3D printed filters based on the N95 design requirements. Complex, 3D-printed alumina composites were produced with acceptable pressure drops for N95 implementation.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Enhancing the platinum atomic layer deposition infiltration depth inside anodic alumina nanoporous membrane

Nanoporous platinum membranes can be straightforwardly fabricated by forming a Pt coating inside the nanopores of anodic alumina membranes (AAO) using atomic layer deposition (ALD). However, the high-aspect-ratio of AAO makes Pt ALD very challenging. By tuning the process deposition temperature and precursor exposure time, enhanced infiltration depth along with conformal coating was achieved for Pt ALD inside the AAO templates. Cross-sectional scanning electron microscopy/energy dispersive x-ray spectroscopy and small angle neutron scattering were employed to analyze the Pt coverage and thickness inside the AAO nanopores. Additionally, one application of platinum-coated membrane was demonstrated by creating a high-density protein-functionalized interface.

42 ENGINEERING↗
DOE OSTI2023

Understanding the unique optical and vibrational signatures of sequential infiltration synthesis derived indium oxyhydroxide clusters for CO 2 absorption

Sequential infiltration synthesis (SIS) is a vapor phase synthesis technique with potential to exert precise control over metal oxyhydroxide incorporation into polymer scaffolds. Here, we observe strong size-dependent properties of InO x (OH) y few-atom clusters deposited with variable SIS cycle numbers within a polymethylmethacrylate (PMMA) matrix. Infrared spectroscopy and ultraviolet-visible absorption spectroscopy reveal that the metal atom coordination and optical properties of the clusters depend on the number of SIS cycles performed as well as the choice of processing parameters. The incorporation of indium oxyhydroxide in PMMA via SIS presents an opportunity to improve the CO 2 absorption capacity and gas selectivity of inexpensive polymers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Slow light engineering in a photonic crystal slab waveguide through optofluidic infiltration and geometric modulation

In this paper, a new type of flat-band slow light structure with high group index (n{sub g}) and large normalized delay-bandwidth product (NDBP) in a silicon on insulator (SOI) based photonic crystal (PC) slab waveguide with a triangular lattice of circular holes is demonstrated. The dispersion engineering is performed by infiltrating optical fluids with different refractive indices n{sub f} in the first row and shifting the second row of air holes adjacent to the PC waveguide (PCW) in the longitudinal direction. In the optimized case, a high NDBP of 0.32 with a group index of 54.55 and a bandwidth of 9.13 nm could be obtained. Furthermore, an ultra-low group velocity dispersion (GVD) in the range of 10{sup –20} s{sup 2}/m is achieved in all of the structures. These results are obtained by numerical simulations based on three-dimensional (3D) plane wave expansion (PWE) method.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

CO 2 Electrolysis Using Metal-Supported Solid Oxide Cells with Infiltrated Pr 0.5 Sr 0.4 Mn 0.2 Fe 0.8 O 3-$δ$ Catalyst

Electrochemical conversion of CO 2 to CO is demonstrated with symmetric-structured metal supported solid oxide cells (MS-SOC). Perovskite Pr 0.5 Sr 0.4 Mn 0.2 Fe 0.8 O 3-δ (PSMF) and Pr 6 O 11 catalysts were infiltrated into the MS-SOC cathode and anode, using 3 cycles with firing at 850 °C and 8 cycles with firing at 800 °C, respectively. Upon reduction during operation, the perovskite PSMF was transformed to Ruddlesden–Popper structure with a highly efficient electrocatalytic activity. The impact of operating temperature (600–800 °C) and overpotential (0–1.8 V) on the CO 2 conversion was investigated. The highest CO 2 conversion of 57.2% was achieved at 750 °C and 1.8 V. During extended operation for 150 h at 750 °C and 1.2 V, a cell demonstrated relatively stable performance, with initial current density of 535 mA cm -2 and CO 2 conversion of 23%. Degradation mechanisms were studied by posttest characterization.

25 ENERGY STORAGE↗
DOE OSTI2016

Communication—Improving Intermediate-Temperature Performance of a Screen-Printed LSCF Cathode with Infiltrated LSCF Nanoparticles

Here, the present study investigates the mass loading effect of an infiltrated La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3-δ (LSCF) nanoparticles (NPs) catalyst on the area-specific polarization resistance (Rp) of a screen-printed porous LSCF cathode for solid oxide fuel cells. The results show that R p of the LSCF-NPs decorated LSCF cathode can be substantially reduced by as much as 89.3% after a single-step impregnation of 1.5 M nitrate solution containing La:Sr:Co:Fe = 0.6:0.4:0.2:0.8 with a mass loading of 3 wt%.

25 ENERGY STORAGE↗
DOE OSTI2019

Aggressive Mammary Cancers Lacking Lymphocytic Infiltration Arise in Irradiated Mice and Can Be Prevented by Dietary Intervention

Because the incidence of breast cancer increases decades after ionizing radiation exposure, aging has been implicated in the evolution of the tumor microenvironment and tumor progression. In this paper, we investigated radiation-induced carcinogenesis using a model in which the mammary glands of 10-month-old BALB/c mice were transplanted with Trp53-null mammary tissue 3 days after exposure to low doses of sparsely ionizing γ-radiation or densely ionizing particle radiation. Mammary transplants in aged, irradiated hosts gave rise to significantly more tumors that grew more rapidly than those in sham-irradiated mice, with the most pronounced effects seen in mice irradiated with densely ionizing particle radiation. Tumor transcriptomes identified a characteristic immune signature of these aggressive cancers. Consistent with this, fast-growing tumors exhibited an immunosuppressive tumor microenvironment with few infiltrating lymphocytes, abundant immunosuppressive myeloid cells, and high COX-2 and TGFβ. Only irradiated hosts gave rise to tumors lacking cytotoxic CD8 + lymphocytes (defined here as immune desert), which also occurred in younger irradiated hosts. These data suggest that host irradiation may promote immunosuppression. To test this, young chimera mice were fed chow containing a honeybee-derived compound with anti-inflammatory and immunomodulatory properties, caffeic acid phenethyl ester (CAPE). CAPE prevented the detrimental effects of host irradiation on tumor growth rate, immune signature, and immunosuppression. These data indicated that low-dose radiation, particularly densely ionizing exposure of aged mice, promoted more aggressive cancers by suppressing antitumor immunity. Dietary intervention with a nontoxic immunomodulatory agent could prevent systemic effects of radiation that fuel carcinogenesis, supporting the potential of this strategy for cancer prevention.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2019

Tumor-Infiltrating Lymphocytes in a Contemporary Cohort of Women with Ductal Carcinoma In Situ (DCIS)

Background: Growing evidence suggests that the tumor immune microenvironment influences breast cancer development and prognosis. Density of tumor-infiltrating lymphocytes (TILs) within invasive breast cancer is correlated with response to therapy, especially in triple-negative disease. The clinical relevance and outcomes of TILs within ductal carcinoma in situ (DCIS) are less understood. Methods: Our institutional database of 668 patients with pure DCIS from 2010 to 2018 was queried. TILs were evaluated by International TILs Working Group guidelines. Percentage of TILs was assessed from the densest focus (hotspot) in one high-power field of stroma touching the basement membrane. Statistical methods included cluster analyses (to define sparse versus dense TILs), logistic, and Cox regression models. Results: Sixty-nine patients with DCIS and TILs were evaluated, of whom 54 (78%) were treated by breast-conserving surgery. Thirteen (19%) patients had ipsilateral recurrence. Each recurrence (n = 13) was matched to four controls (n = 56) based on date of surgery. Median follow-up was 6.7 years. TILs were defined as sparse (< 45%) or dense (≥ 45%). Dense TILs were associated with younger age (p = 0.045), larger tumor size (p < 0.001), high nuclear grade (p = 0.010), comedo histology (p = 0.033), necrosis (p = 0.027), estrogen receptor (ER) negativity (p = 0.037), and ipsilateral recurrence (p = 0.001). Nine patients with dense TILs had mean time to recurrence of 73.5 months compared with four patients with sparse TILs with mean time to recurrence of 97.9 months (p = 0.003). Conclusions: Dense TILs were significantly associated with age, tumor size, nuclear grade, comedo histology, necrosis, and ER status and was a significant predictor of recurrence in patients with pure DCIS.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2017

Conceptual Modeling Framework for E-Area PA HELP Infiltration Model Simulations

A conceptual modeling framework based on the proposed E-Area Low-Level Waste Facility (LLWF) closure cap design is presented for conducting Hydrologic Evaluation of Landfill Performance (HELP) model simulations of intact and subsided cap infiltration scenarios for the next E-Area Performance Assessment (PA).

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2017

E-Area LLWF Vadose Zone Model: Probabilistic Model for Estimating Subsided-Area Infiltration Rates

A probabilistic model employing a Monte Carlo sampling technique was developed in Python to generate statistical distributions of the upslope-intact-area to subsided-area ratio (Area UAi /Area SAi ) for closure cap subsidence scenarios that differ in assumed percent subsidence and the total number of intact plus subsided compartments. The plan is to use this model as a component in the probabilistic system model for the E-Area Performance Assessment (PA), contributing uncertainty in infiltration estimates.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2018

Intact Infiltration Model Design Check for E-Area LLWF

A design check will be performed on the infiltration-rate time profile for the intact case for the proposed E-Area Low-Level Waste Facility (LLWF) final closure cap design.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2018

Subsidence Infiltration Model Design Check for E-Area LLWF

A design check will be performed on the revised Python-based probabilistic subsidence infiltration model for the proposed E-Area Low-Level Waste Facility (LLWF) final closure cap design.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2019

Evaluation of Binder Jetting and Chemical Vapor Infiltration as a Production Method for Silicon Carbide Parts for Nuclear Applications

Application of silicon carbide (SiC) is often sought within nuclear energy systems due to its high thermal conductivity, mechanical and environmental stability at elevated temperatures, corrosion resistance, and exceptional displacement damage irradiation tolerance. As such, the transformational challenge reactor (TCR) program is considering its application in its additively manufactured core. SiC may be used as the matrix for the TCR fuel blocks that comprise of TRISO fuel particles embedded inside this material or used as core non-fuel-bearing peripherical structures such as bottom support manifolds. The core peripherical structures serves to support the overall core geometry, direct and guide coolant flow, and also reflect back leaked neutrons into the core. SiC has very low neutron absorption and adequate scattering cross sections that makes it an ideal material for utilization in the TCR core. Like many ceramics, however, SiC is difficult and at times impractical to shape into complex geometries via traditional machining due to its brittleness. Further, large structures comprising nuclear-grade SiC, i.e. highly pure and crystalline, are costly. Additive manufacturing (AM), however, offers the ability to shape materials by adding layer-by-layer rather than subtracting, contributing new possibilities for previously difficult-to-shape materials. Thus, exploring AM as a method to shape SiC offers a highly cost-effective method and is strategic to developing the next generation of components for nuclear reactors. This report outlines an evaluation of binder jet additive manufacturing combined with chemical vapor infiltration (CVI) to produce nearly-dense silicon carbide artifacts in complex geometries suitable for advanced nuclear reactor designs. The focus is placed on the binder jet printing technologies at large scale for nonfuel-bearing structures relevant to the TCR core and other advanced reactors. Among all AM processes, binder jet delivers the highest resolution capability while still maintaining large print sizes, making it the ideal candidate for nuclear component production.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Modeling the Effects of Microwave Heating on Densification in Chemical Vapor Infiltration

Microwave heating has great potential to accelerate the synthesis of ceramic matrix composites (CMCs) by a process called Chemical Vapor Infiltration (CVI). In CVI, reactive gases ingress a porous preform and undergo chemical transformation to deposit solid ceramic phase within the pores at high temperature thus, densifying the preform. However, the competing effects of chemical kinetics and gas transport are known to result in non-uniform densification as the outer surfaces of the preform experience faster depositions compared to the core. Achieving spatial temperature control plays a key role improving the densification quality. Microwave heating can potentially create temperature inversion such that the core of the preform is hotter than the outer surface and subsequently, lead to improved densification while keeping the manufacturing times and costs low. In the present work, a computational modeling strategy has been developed that accounts for the key physical phenomena responsible for densification of porous preforms using microwave heating. Specifically, a chemical kinetics model has been formulated for Silicon Carbide (SiC) deposition from MTS/H2 precursor. The model is implemented in a pore-resolved reactive transport solver, Quilt. The CVI simulations are performed for several conditions. Initially, parameterized temperature control is imposed to identify optimum conditions for good densification quality at a fraction of processing time. Further, simulations of microwave heating of porous SiC preforms are performed using OpenFOAM. A strategy to achieve and enhance temperature inversion is identified. The resulting temperature profiles are used in the pore-resolved densification simulations to analyze the densification behavior. It is observed that the temperature inversion achieved by microwave heating leads to significant improvements in densification quality and at the same time, keeps the manufacturing time low.

36 MATERIALS SCIENCE↗