Linearized analysis of flow of incompressible laminar jet contained between side walls.
Incompressible laminar jet bounded by two parallel walls or by three walls, using linearized analysis related to Oseen approximation
Greber, I.↗
SEARCH · Engineering Papers
Results for “incompressible flow”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
A finite-element method for lifting surfaces in steady incompressible subsonic flow
The problem of potential steady subsonic flow for lifting surfaces is considered. This problem requires the solution of an integral equation relating the value of the potential discontinuity on the lifting surface and its wake to the values of the normal derivative of the potential which are known from the boundary conditions. The lifting surface is divided into small (quadrilateral hyperboloidal) surface elements, which are described in terms of the Cartesian components of the four corner points. The values of the potential discontinuity and the normal derivative of the potential are assumed to be constant within each element and equal to their values at the centroids of the elements. This yields a set of linear algebraic equations. Numerical results are in good agreement with existing ones.
Morino, L.↗
Experimental and numerical studies of the incompressible viscous flow over a two-dimensional airfoil
Physical and numerical experiments for the low Reynolds number flow over a two-dimensional NACA 66(3)-018 airfoil have been performed. Pressure distributions and smoke flow photographs have been obtained for a Reynolds number based on airfoil chord and free-stream conditions of approximately 40,000 at angles of attack of 0 and 6 deg, and for a Reynolds number based on airfoil chord and free-stream conditions of approximately 400,000 at angles of attack of 0 and 12 deg in a low turbulence wind tunnel. Finite difference numerical experiments, using an approximate factorization method, have been obtained for a Reynolds number of 40,000 at angles of attack of 0 and 6 deg. Although the comparison of the wind tunnel and computer results is encouraging, further studies of this type are clearly necessary.
Mueller, T. J.↗
On conforming mixed finite element methods for incompressible viscous flow problems
The application of conforming mixed finite element methods to obtain approximate solutions of linearized Navier-Stokes equations is examined. Attention is given to the convergence rates of various finite element approximations of the pressure and the velocity field. The optimality of the convergence rates are addressed in terms of comparisons of the approximation convergence to a smooth solution in relation to the best approximation available for the finite element space used. Consideration is also devoted to techniques for efficient use of a Gaussian elimination algorithm to obtain a solution to a system of linear algebraic equations derived by finite element discretizations of linear partial differential equations.
Gunzburger, M. D↗
Effect of particle presence on the incompressible inviscid flow through a two dimensional compressor cascade
A computational model for calculating the flow field, in the presence of solid particles, through a two dimensional compressor cascade is presented. The method treats the particle phase in the Lagrangian system and the fluid phase in the Eulerian system. The equations of momentum of the fluid phase are modified to account for the momentum exchange between the two phases. The resulting modified momentum and continuity equations are reduced to the conventional stream function-vorticity formulation. The analysis yields the change in the blade surface pressure distribution, the total pressure and velocity in the flow field. Based on this, it is possible to predict the decrease in compressor performance under the presence of particles.
Balan, C.↗
Effect of particle presence on the incompressible inviscid flow through a two dimensional compressor cascade
A computational model is developed for calculating the flow field, in the presence of solid particles, through a two-dimensional compressor cascade. Results show that the effect of solid particles on the flow field contributes to the bending of the streamlines toward the blade suction surface. It is determined that the difference in the pressure coefficient for particulate flow, with 165 micron diameter for the particles, is of the order of 3 percent over the air only flow. The change in the pressure coefficients is shown to be much larger for very small particles. It was found that the total pressure loss associated with the particulate flow is very high for very small particles as compared with large particles. The total pressure loss is also shown to be higher for accelerating flow than for decelerating flow. The total pressure loss is shown to be directly proportional to the particle concentration. It is concluded that significant reductions in performance can occur in a real multistage machine due to the changes in the pressure ratios, particularly if the suspended matter is small particles.
Balan, C.↗
Improved turbulence models based on large eddy simulation of homogeneous, incompressible turbulent flows
The physical bases of large eddy simulation and subgrid modeling are studied. A subgrid scale similarity model is developed that can account for system rotation. Large eddy simulations of homogeneous shear flows with system rotation were carried out. Apparently contradictory experimental results were explained. The main effect of rotation is to increase the transverse length scales in the rotation direction, and thereby decrease the rates of dissipation. Experimental results are shown to be affected by conditions at the turbulence producing grid, which make the initial states a function of the rotation rate. A two equation model is proposed that accounts for effects of rotation and shows good agreement with experimental results. In addition, a Reynolds stress model is developed that represents the turbulence structure of homogeneous shear flows very well and can account also for the effects of system rotation.
Bardino, J.↗
Algorithmic and theoretical results on computation of incompressible viscous flows by finite element methods
Primitive variable as well as streamfunction-vorticity and pure streamfunction formulations are discussed. For the primitive variable case alternative choices of the viscous stress term are shown to produce natural boundary conditions which are well suited for matching to various far field conditions. For the other cases recent analytical results, including error estimates are described, and an optical algorithm for pressure recovery as well as treatment for multiply connected domains are given.
Gunzburger, M. D.↗
Transient radiative energy transfer in incompressible laminar flows
Analysis and numerical procedures are presented to investigate the transient radiative interactions of nongray absorbing-emitting species in laminar fully-developed flows between two parallel plates. The particular species considered are OH, CO, CO2, and H2O and different mixtures of these. Transient and steady-state results are obtained for the temperaure distribution and bulk temperature for different plate spacings, wall temperatures, and pressures. Results, in general, indicate that the rate of radiative heating can be quite high during earlier times. This information is useful in designing thermal protection systems for transient operations.
Tiwari, S. N.↗
Helicity fluctuations in incompressible turbulent flows
Results from direct numerical simulations of several homogeneous flows and fully developed turbulent channel flow indicate that the probability distribution function (pdf) of relative helicity density exhibits at most a 20 percent deviation from a flat distribution. Isotropic flows exhibit a slight helical nature but the presence of mean strain in homogeneous turbulence suppresses helical behavior. All the homogeneous turbulent flows studied show no correlation between relative helicity density and the dissipation of turbulent kinetic energy. The channel flow simulations indicate that, except for low-dissipation regions near the outer edge of the buffer layer, there is no tendency for the flow to be helical. The strong peaks in the relative helicity density pdf and the association of these peaks with regions of low dissipation found in previous simulations by Pelz et al.(1985) are not observed.
Rogers, Michael M.↗
Adaptive implicit-explicit methods for flow problems
Studies on the adaptive implicit-explicit (AIE) method for large-scale problems are presented. The AIE method is based on dynamic grouping of the elements into the implicit and explicit subsets as dictated by the element level stability and accuracy considerations. The method has been applied to various flow problems including the incompressible flow and convection-diffusion problems, and it has been demonstrated that substantial savings in CPU time and memory can be achieved.
Liou, J.↗
Application of a new K-tau model to near wall turbulent flows
A recently developed K-tau model for near wall turbulent flows is applied to two severe test cases. The turbulent flows considered include the incompressible flat plate boundary layer with the adverse pressure gradients and incompressible flow past a backward facing step. Calculations are performed for this two-equation model using an anisotropic as well as isotropic eddy-viscosity. The model predictions are shown to compare quite favorably with experimental data.
Thangam, S.↗
Application of a new K-tau model to near wall turbulent flows
A recently developed K-tau model for near wall turbulent flows is applied to a variety of test cases. The turbulent flows considered include the incompressible flat plate boundary layer with adverse pressure gradients, incompressible flow past a backward facing step, and the supersonic flat plate boundary layer at zero pressure gradient. Calculations are performed for this two-equation model using an anisotropic as well as isotropic eddy-viscosity. The model predictions are shown to compare quite favorably with experimental data.
Abid, R.↗
An assessment of computational fluid dynamic techniques in the analysis and design of turbomachinery - The 1990 Freeman Scholar Lecture
Various computational fluid dynamic techniques are reviewed focusing on the Euler and Navier-Stokes solvers with a brief assessment of boundary layer solutions, and quasi-3D and quasi-viscous techniques. Particular attention is given to a pressure-based method, explicit and implicit time marching techniques, a pseudocompressibility technique for incompressible flow, and zonal techniques. Recommendations are presented with regard to the most appropriate technique for various flow regimes and types of turbomachinery, incompressible and compressible flows, cascades, rotors, stators, liquid-handling, and gas-handling turbomachinery.
Lakshminarayana, B.↗
Finite element algorithms for incompressible viscous flows
Explore the source record for details and available documents.
Gunzburger, M. D.↗
Development of generalized pressure velocity coupling scheme for the analysis of compressible and incompressible combusting flows
The objective of this investigation has been to develop an algorithm (or algorithms) for the improvement of the accuracy and efficiency of the computer fluid dynamics (CFD) models to study the fundamental physics of combustion chamber flows, which are necessary ultimately for the design of propulsion systems such as SSME and STME. During this three year study (May 19, 1978 - May 18, 1992), a unique algorithm was developed for all speed flows. This newly developed algorithm basically consists of two pressure-based algorithms (i.e. PISOC and MFICE). This PISOC is a non-iterative scheme and the FICE is an iterative scheme where PISOC has the characteristic advantages on low and high speed flows and the modified FICE has shown its efficiency and accuracy to compute the flows in the transonic region. A new algorithm is born from a combination of these two algorithms. This newly developed algorithm has general application in both time-accurate and steady state flows, and also was tested extensively for various flow conditions, such as turbulent flows, chemically reacting flows, and multiphase flows.
Chen, C. P.↗
Theory and implementation of high-order adaptive hp methods for analysis of incompressible viscous flows
An account is given of 'smart' algorithms for CFD which change in structure and performance with during flow calculations to accommodate changing properties of the solution. Such algorithms prominently include adaptive FEM methods, which are designed to adjust mesh parameters for the control of numerical error; attention is presently given to those which change the mesh size h and the local spectral order p in order to achieve high accuracies with minimal numbers of degrees of freedom. These 'hp methods' produce exponentially convergent approximations through which flow features are resolved by automatically distributing element sizes and spectral orders. This leads to calculation of the local (elementwise) error in the approximation.
Oden, J. T.↗
Segmented multigrid domain decomposition procedure for incompressible viscous flows
In this paper, the Navier-Stokes (NS) equations are approximated with a reduced NS system, that represents the lowest-order terms in an asymptotic Re expansion. This system allows for simplified boundary conditions, more generality in the location of the outflow boundary, and insures mass conservation in all subdomain grid interfaces, and also at the outflow boundary. The higher-order NS diffusion terms are included through a deferred corrector, in chosen subdomains, when required.
Srinivasan, Kumar↗