Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “hypersonic flow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

Analysis of heat transfer in a simulated wing-elevon cove in hypersonic flow

A simplified analytical model of leakage into a wing-elevon cove under high speed external flow conditions is presented. The model accounts for convection from the high temperature gas stream leaking into the cove, radiation exchanges between walls and with the environment, and axial conduction within the channel walls. Comparisons are made of predicted and measured wall temperatures of an experimental wing-elevon-cove model that was tested in a hypersonic wind tunnel. Analytically determined Nusselt numbers for laminar flow entrance conditions are compared with those calculated from experimentally measured gas temperatures, wall temperatures and wall heating rates. Although reasonable agreement appears to be indicated, testing times much larger than those of the present test program (5 seconds) would be desirable in evaluating the reliability and accuracy of the simplified model.

Keshock, E. G.↗
NASA NTRS1992

Large-amplitude finite element flutter analysis of composite panels in hypersonic flow

Consideration is given to a finite-element approach for determining the nonlinear flutter characteristics of 3D thin laminated composite panels using the full third-order-piston transverse-loading aerodynamic theory. The unsteady hypersonic aerodynamic theory and the von Karman large-deflection-plate theory are used to formulate the aeroelasticity problem. Nonlinear flutter analyses are performed to assess the influence of the higher-order aerodynamic theory on the structure's limit-cycle amplitude and the dynamic pressure of the flow velocity. A solution procedure is presented to solve the nonlinear panel flutter and large-amplitude free-vibration finite-element equations. Nonlinear flutter analyses are performed for different boundary support-conditions and for various system parameters. Linear finite-element flutter for isotropic and composite panels and large-amplitude isotropic panel flutter results are compared with existing classical solutions. The large-amplitude panel flutter results using the full third-order piston aerodynamic theory are presented to assess the influence of the nonlinear aerodynamic theory.

Gray, Carl E., Jr.↗
NASA NTRS2002

Prediction of Drag Reduction in Supersonic and Hypersonic Flows with Counterflow Jets

Computational fluid dynamics solutions of the flowfield of a truncated cone-cylinder with and without counterflow jets have been obtained for the short penetration mode (SPM) and long penetration mode (LPM) of the freestream-counterflow jet interaction flowfield. For the case without the counterflow jet, the comparison of the normalized surface pressures showed very good agreement with experimental data. For the case with the SPM jet, the predicted surface pressures did not compare as well with the experimental data upstream of the expansion corner, while aft of the expansion corner, the comparison of the solution and the data is seen to give much better agreement. The difference in the prediction and the data could be due to the transient character of the jet penetration modes, possible effects of the plasma physics that are not accounted for here, or even the less likely effect of flow turbulence, etc. For the LPM jet computations, one-dimensional isentropic relations were used to derived the jet exit conditions in order to obtain the LPM solutions. The solution for the jet exit Mach number of 3 shows a jet penetration several times longer than that of the SPM, and therefore much weaker bow shock, with an attendant reduction in wave drag. The LPM jet is, in essence, seen to be a "pencil" of fluid, with much higher dynamic pressure, embedded in the oncoming supersonic or hypersonic freestream. The methodology for determining the conditions for the LPM jet could enable a practical approach for the design and application of counterflow LPM jets for the reduction of wave drag and heat flux, thus significantly enhancing the aerodynamic characteristics and aerothermal performance of supersonic and hypersonic vehicles. The solutions show that the qualitative flow structure is very well captured. The obtained results, therefore, suggest that counterflowing jets are viable candidate technology concepts that can be employed to give significant reductions in wave drag, heat flux, and other attendant aerodynamic benefits.

Daso, Endwell O.↗
NASA NTRS1990

Flat plate at incidence as a waverider in rarefied hypersonic flow

The physical validity of continuum models and their ability to predict the critical aerothermodynamic properties of a waverider at high altitudes are examined using a flat plate at angle of attack as a generic hypersonic lifting vehicle. For a shock layer far from local translational equilibrium, a theoretical study based on Grad's thirteen-moment equations shows that the Navier-Stokes based solutions can correctly predict the drag, lift, and surface heat transfer rate, with the prediction error comparable to that of the standard shock-layer theory. The conclusion is supported by a comparison with direct simulation Monte Carlo calculations.

Cheng, H. K.↗
NASA NTRS1975

A comparison of measured and predicted sphere shock shapes in hypersonic flows with density ratios from 4 to 19

Measured shock shapes are presented for sphere and hemisphere models in helium, air, CF4, C2F6, and CO2 test gases, corresponding to normal-shock density ratios (primary factor governing shock detachment distance of blunt bodies at hypersonic speeds) from 4 to 19. These shock shapes were obtained in three facilities capable of generating the high density ratios experienced during planetary entry at hypersonic conditions; namely, the 6-inch expansion tube, with hypersonic CF4 tunnel, and pilot CF4 Mach 6 tunnel (with CF4 replaced by C2F6). Measured results are compared with several inviscid perfect-gas shock shape predictions, in which an effective ratio of specific heats is used as input, and with real-gas predictions which include effects of a laminar viscous layer and thermochemical nonequilibrium.

Miller, C. G., III↗
NASA NTRS1989

Rotational and vibrational nonequilibrium effects in rarefied, hypersonic flow

Results are reported for an investigation into the methods by which energy transfer is calculated in the Direct Simulation Monte Carlo method. Description is made of a recently developed energy exchange model that deals with the translational and rotational modes. A new model for simulating the transfer of energy between the translational and vibrational modes is also explained. This model allows the vibrational relaxation time to follow the temperature dependence predicted by the Landau-Teller theory at moderate temperatures. For temperatures in excess of about 8000K the vibrational model is extended to include an empirical result for the relaxation time. The effect of introducing these temperature dependent collision numbers into the DSMC technique is assessed by making calculations representative of the stagnation streamline of a hypersonic space vehicle. Both thermal and chemical nonequilibrium effects are included while the flow conditions have been chosen such that ionization and radiation may be neglected. The introduction of these new models is found to significantly affect the degree of thermal nonequilibrium observed in the flowfield. Larger, and more widely ranging, differences in the results obtained with the different energy exchange probabilities are found when a significant amount of internal energy is included in the calculation of chemical nonequilibrium.

Boyd, Iain D.↗
NASA NTRS1981

Heat transfer on a flat plate in continuum to rarefied hypersonic flows at Mach numbers of 19.2 and 25.4

Local heat transfer rates were measured on a flat steel plate (10 in. wide and 16 in. long) with sharp and blunt leading edges (0.001 and 0.010 in.) in the transition from the strong interaction boundary layer regime with no slip at the surface to the free molecule regime. The tests were conducted in a combustion driven hypersonic shock tunnel, with the nominal free stream Mach numbers of 19.2 and 25.4, and a reflected stagnation temperature of approximately 2340 R. The twelve heat transfer gages were made of platinum sputtered on a Pyrex backing to a thickness of approximately 350 A, insulated by a silicone dioxide film. For both Mach numbers the heat transfer data agreed reasonably well with the strong interaction prediction of Li and Nagamatsu (1953, 1955) for unit Reynolds numbers greater than approximately 100,000 and leading edge Knudsen numbers less than approximately 4. At lower density conditions the rarefied flow effects began to dominate the flow phenomena near the leading edge region of the sharp flat plate. A systematic reduction in the heat transfer rate close to the leading edge was observed for both Mach number tests as the leading edge density was reduced and the mean free path was increased.

Nagamatsu, H. T.↗
NASA NTRS1992

Computational fluid dynamics application to hypersonic flow over a Martian entry vehicle (MEV) - A correlation with experiment

A class of vehicles for a mission to Mars are analyzed for aerodynamic characteristics using advanced Computational Fluid Dynamics (CFD). The general configuration is a modified cone-conical-frustum geometry where the nose radius has a large influence on the flowfield. Inviscid-compressible flow using the Euler equations and viscous-compressible flow using the thin-layer Navier-Stokes equations is applied to the configuration. The surface modeling, grid generation and application of state-of-the-art CFD software are described. The effects of nose radius, angle of attack, and hypersonic velocity on the flight characteristics of the vehicle are discussed. The numerical simulations demonstrate the merits of the inviscid and viscous software. Results are compared with wind tunnel experiments.

Stewart, John E.↗
NASA NTRSDate not supplied

The Material Response of PICA-NuSil to a Hypersonic Flow Environment

Phenolic Impregnated Carbon Ablator (PICA) is NASA’s baseline thermal protection system for missions to Mars. PICA is friable; therefore, NuSil ® CV-1144-0 is applied to the surface of flight hardware to mitigate the contamination of spacecraft sensors. NuSil is composed of a polysiloxane resin system that can transform into an oxidation-resistant coating upon heating. Therefore, a pathfinder campaign was conducted at the Hypersonic Materials Environmental Test System (HyMETS) at the NASA Langley Research Center to investigate the material response of instrumented sphere-cone models made from PICA coated with NuSil ® . Analysis of the post-test data is presented and suggests that NuSil ® impacts the material response of test articles subjected to oxidizing atmospheres, as evidenced by a reduction of the measured surface temperature and in-depth temperature response. Finally, a four-step ablation mechanism is proposed based on observations from high-speed video, optical emission spectroscopy, thermal analysis, and post-test surface characterization.

PICA PICA-NuSil Siloxane Silicone↗
NASA NTRS1993

Chemical nonequilibrium Navier-Stokes solutions for hypersonic flow over an ablating graphite nosetip

The general boundary conditions including mass and energy balances of chemically equilibrated or nonequilibrated gas adjacent to ablating surfaces have been derived. A computer procedure based on these conditions was developed and interfaced with the Navier-Stokes solver for predictions of the flow field, surface temperature, and surface ablation rates over re-entry space vehicles with ablating Thermal Protection Systems (TPS). The Navier-Stokes solver with general surface thermochemistry boundary conditions can predict more realistic solutions and provide useful information for the design of TPS. A test case with a proposed hypersonic test vehicle configuration and associated free stream conditions was developed. Solutions with various surface boundary conditions were obtained, and the effect of nonequilibrium gas as well as surface chemistry on surface heating and ablation rate were examined. The solutions of the GASP code with complete ablating surface conditions were compared with those of the ASC code. The direction of future work is also discussed.

Chen, Y. K.↗
NASA NTRS1997

Drag Prediction and Transition in Hypersonic Flow

This paper discusses progress on issues such as instability studies, nose-bluntness and angle-of-attack effects, and leading-edge-contamination problems from theoretical, computational, and experimental points of view. Also included is a review of wind-tunnel and flight data, including high-Re flight transition data, the levels of noise in flight and in wind tunnels, and how noise levels can affect parametric trends. A review of work done on drag accounting and the role of viscous drag for hypersonic vehicles is also provided.

Reed, Helen L.↗
NASA NTRS1972

Shock interference heating in hypersonic flows.

This paper presents results of a theoretical and experimental study of shock interference heating which encompassed a variety of basic body shapes and flow conditions. Measurements of pressure and heat transfer were obtained in four wind tunnels at NASA-Langley Research Center. These data cover the Mach number range from 6 to 20, and specific heat ratio range from 1.20 to 1.67. Peak heating measurements up to 17 times ordinary stagnation point rates and pressure peaks up to 8 times freestream pitot pressure were recorded. Numerical results from computer codes developed for each of the six types of interference compare favorably with most of the experimental data. A theoretical parametric study determined the effects of Mach number, specific heat ratio, and impinging shock strength on amplification of pressure and heat transfer. The results of this study show that shock interference is important for hypersonic vehicles such as the Space Shuttle. The problem is aggravated by changes along the flight path of the particular type of interference and the location of regions of peak heat transfer and pressure.

Hains, F. D.↗
DOE OSTI2023

First principles simulation of reacting hypersonic flow over a blunt wedge

This article presents molecular-level analysis of a reactive, near-continuum, Mach 21 nitrogen flow over a blunt wedge using the direct molecular simulation (DMS) method. The flow conditions lead to internal energy excitation and dissociation in the flow field, resulting in thermal and chemical nonequilibrium in the flow. Thermal nonequilibrium in the vibrational mode is observed to extend to the molecular level, where the vibrational energy distributions at various points in the flow field are observed to be non-Boltzmann. Furthermore, this is the first reactive DMS calculation where the wall is assumed to be isothermal and full momentum accommodation of the particles is enforced, hence incorporating viscous wall effects. Since the DMS method uses a quantum mechanically generated interaction potential as its only modeling input, all thermochemical and transport properties of the flow field can directly be attributed to the ab initio potential energy surface. Using the DMS solution as a benchmark, this article assesses the performance of Navier–Stokes computational fluid dynamics solutions using lower fidelity two-temperature models. Two models are chosen as points of comparison: the well-known Park two-temperature model and the recently developed modified Marrone and Treanor model.

Mechanics↗
DOE OSTI2026

Boundary-layer receptivity to oblique freestream vorticity waves for a high-enthalpy hypersonic flow

The receptivity of a Mach 15 straight-cone boundary layer to oblique freestream vorticity waves is investigated using direct numerical simulation (DNS) alongside linear stability theory and the linear parabolized stability equations. A thermochemical nonequilibrium gas model is used. Oblique freestream vorticity waves at frequencies of 400, 800, and 1200 kHz are considered, with incident angles ranging from 0° to 29.4° at 400 kHz, 0° to 15.7° at 800 kHz, and 0° to 20.6° at 1200 kHz. The 400 kHz case is of primary interest due to the strong second-mode amplification at this frequency. Although the underlying base flow is axisymmetric, the oblique vorticity waves lead to a fully three-dimensional boundary-layer disturbance whose characteristics vary depending on the azimuthal ray relative to the freestream wave. Moving downstream within the second-mode instability region, some clear trends emerge in terms of the boundary-layer disturbance amplitudes; that is, disturbance amplitudes are highest at the leeward ray (relative to the freestream wave), but weakest about halfway between the windward and leeward rays. Increasing the incident angle causes the amplitudes to increase on the leeward ray and decrease on the windward ray. Moreover, the boundary-layer disturbance throughout contains a wide spectrum of azimuthal wavenumbers in which the disturbance energy falls off at higher wavenumbers. Increasing the incident angle causes the azimuthal spectrum of the boundary-layer disturbance to broaden overall. Qualitatively similar results are found for the two higher frequencies leading up to the peak-amplitude locations corresponding to the second-mode instability.

42 ENGINEERING↗