Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “humidity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Factors affecting relative humidity and its relationship with the long-term variation of fog-haze events in the Yangtze River Delta

Relative humidity (RH) is one of the most important parameters in the study of fog-haze. This paper first estimates the contributions of the key quantities (temperature, water vapor, air pollutant) and their combinations to the relative change of RH, and then investigates the relationships of RH with the long-term variation of haze and fog days based on the meteorological data in the Yangtze River Delta over the period 1970-2010.The main conclusions are as follows. (1) Temperature is the foremost factor influencing RH, with the effect of specific humidity and direct contribution of air pollutant being second and third. (2) RH shows a prominent descending trend in the Yangtze River Delta, due to global warming and the ‘analogous heat island effect’ (AHIE). (3) Decreasing RH was responsible for the reduction of fog days. The AHIE can explain the phenomenon in which fog days in metropolises are less than in small cities. (4) Granger causality analysis of inter-annual variation further shows that increasing aerosol loading Ganger-causes the increasing haze days, rather than meteorological parameters such as RH. High RH would enhance hygroscopic growth of particle and then suppress the planet boundary layer height (PBLH) and lead to more haze days, lower PBLH further increases aerosols and RH, this positive feedback mechanism can be established under the condition of aerosol loading being relatively stable and beyond the threshold for haze formation. (5) If aerosol emissions maintain the status quo, climate cooling would result in serious fog-haze events occurring more frequently in Yangtze River Delta. The research provide a scientific basis for understanding the influence of meteorological factors on RH and the connection between the variation of long term fog-haze days and RH under the background of climate change.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

A novel lung-inspired 3D-printed desiccant-coated heat exchanger for high-performance humidity management in buildings

Offering an independent humidity management method for buildings, desiccant-coated heat exchangers (DCHXs) are deemed a promising approach to improve the overall energy efficiency of air conditioning (AC) systems. State-of-the-art DCHXs, however, are bound with conventional HX topologies either providing limited desiccant-air interfacial areas or introducing excessive pressure drop penalties. In this paper a novel 3D-printed DCHX concept inspired by the bronchi arrangement of a human lung is introduced to address the shortcomings inherent in existing DCHX designs. The proposed lung-inspired DCHX utilizes two intertwined bicontinuous flow networks enabling highly efficient heat and mass transfer characteristics for augmented adsorption and regeneration processes at low pressure drop penalties. While the first network evenly distributes an incoming air stream through the entire volume of the lung-inspired DCHX, the second network volumetrically splits a cooling water stream within and through the first network. Effects of various parameters including air flow rate, outdoor air humidity ratio, and regeneration temperature on dehumidification performance and energy efficiency of the proposed lung-inspired DCHX were investigated. Experimental results indicated the proposed lung-inspired 3D-printed DCHX outperforms existing DCHX systems by demonstrating an excellent balance between a high volumetric adsorption rate and a low pressure drop penalty. The volumetric adsorption rate of the proposed lung-inspired DCHX technology is 54.8 g/m 3 -s, a more than two-fold improvement compared with state-of-the-art DCHX systems. Additionally, the lung-inspired DCHX offers high thermal energy efficiency of 56% at a low regeneration temperature of 40 °C. Therefore, the proposed lung-inspired 3D-printed DCHX offers a new solid-desiccant-based air dehumidification pathway for next-generation high-performance AC systems.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2022

Independent temperature and humidity control of a precooled desiccant air cooling system with proportional and fuzzy logic + proportional based controllers

Providing room comfort quickly by using less energy in cooling systems is important both in terms of efficiency and environment. In this study, independent temperature/humidity control strategies are designed for precooled desiccant based evaporative cooling system to provide room comfort quickly with less energy. Therefore, the speed controls of the system's actuators become important depending on the room, cooler and atmosphere conditions. The mathematical models are obtained to determine the relation between voltages of actuators and the variations in the room's temperature and humidity. After that, new control strategies are developed based on Proportional and Fuzzy+Proportional techniques and the control performance is increased by adding extra modes to the operation of the actuators. The effects of the control techniques on the cooling performance and energy consumption were investigated for different cases. It has been observed that the room temperature and relative humidity reach the set values in a short time for both techniques and are successfully kept at these values under the disturbances. By using Fuzzy+Proportional controller, the robustness of the cooler increases due to more precisely adjustment of controller's parameter depending the system conditions. Finally, both control strategies provide more than 20% energy savings compared to the traditional ON/OFF control.

42 ENGINEERING↗
DOE OSTI2020

Falling-film thermosyphons: Application to water harvesting from humid gas streams

Water harvesting from humid gas streams is central to fresh-water production, desalination, and particulate removal from combustion gas streams. Two-phase thermosyphons are well suited for these applications due to their very low thermal resistance, but have several operating limits at the high heat flows required for such applications. This work introduces the falling-film thermosyphon for large-scale condensation applications. Working fluid is pumped to the top of the evaporator to provide the evaporating liquid film on the inner tube wall, rather than by vapor condensation. The flooding, dry-out and pool-boiling limits are eliminated, resulting in significantly higher maximum heat fluxes for the same physical evaporator size. Furthermore, the condenser no longer needs to be located vertically above the evaporator, which allows for a standard steam condenser to be used. A model for the condensation process in humid air was developed that estimates the fluid and heat transfer and is confirmed experimentally. Further benefits include the use of a high-thermal-conductivity polymer material for the evaporator section to minimize corrosion, and the ability to impose a temperature boundary condition on the evaporator, which is made possible due to the elimination of a liquid pool.

42 ENGINEERING↗
DOE OSTI2015

High temperature proton exchange membranes with enhanced proton conductivities at low humidity and high temperature based on polymer blends and block copolymers of poly(1,3-cyclohexadiene) and poly(ethylene glycol)

Hot (at 120 °C) and dry (20% relative humidity) operating conditions benefit fuel cell designs based on proton exchange membranes (PEMs) and hydrogen due to simplified system design and increasing tolerance to fuel impurities. In this paper, presented are preparation, partial characterization, and multi-scale modeling of such PEMs based on cross-linked, sulfonated poly(1,3-cyclohexadiene) (xsPCHD) blends and block copolymers with poly(ethylene glycol) (PEG). These low cost materials have proton conductivities 18 times that of current industry standard Nafion at hot, dry operating conditions. Among the membranes studied, the blend xsPCHD-PEG PEM displayed the highest proton conductivity, which exhibits a morphology with higher connectivity of the hydrophilic domain throughout the membrane. Simulation and modeling provide a molecular level understanding of distribution of PEG within this hydrophilic domain and its relation to proton conductivities. Finally, this study demonstrates enhancement of proton conductivity at high temperature and low relative humidity by incorporation of PEG and optimized sulfonation conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Flash Freeze Flow Tube to Vitrify Aerosol Particles at Fixed Relative Humidity Values

Development of methods to measure the phase transitions and physical properties of submicron atmospheric aerosol particles is needed to better model these systems. Here, we introduce a method to flash freeze submicron particles to measure phase transitions as a function of relative humidity (RH). Particles are equilibrated at a fixed RH, vitrified in a temperature-controlled flow tube, and imaged with cryogenic transmission electron microscopy (cryo-TEM). We demonstrate the use of the technique for measuring the efflorescence relative humidity (ERH) of potassium sulfate and potassium chloride aerosol as well as the separation RH for a multicomponent organic/inorganic system that undergoes liquid-liquid phase separation (LLPS). The location of phase transitions can shift between the micrometer and nanometer size regimes and particles in a given population may have a range of RH over which a phase transition occurs. This technique addresses these requirements by allowing for characterization of the phase transitions for individual particles in a population on the submicron scale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Enhancement of Proton Conductivity in Nonporous Metal–Organic Frameworks: The Role of Framework Proton Density and Humidity

Owing to their inherent pore structure, porous metal–organic frameworks (MOFs) can undergo postsynthetic modification, such as loading extra-framework proton carriers. However, strategies for improving the proton conductivity for nonporous MOFs are largely lacking, although increasing numbers of nonporous MOFs exhibit promising proton conductivities. Often, high humidity is required for nonporous MOFs to achieve high conductivities, but to date no clear mechanisms have been experimentally identified. Here we describe the new materials MFM-550(M), [M(HL 1 )], (H 4 L 1 = biphenyl-4,4'-diphosphonic acid; M = La, Ce, Nd, Sm, Gd, Ho), MFM-550(Ba), [Ba(H 2 L 1 )], and MFM-555(M), [M(HL 2 )], (H 4 L 2 = benzene-1,4-diphosphonic acid; M = La, Ce, Nd, Sm, Gd, Ho), and report enhanced proton conductivities in these nonporous materials by (i) replacing the metal ion to one with a lower oxidation state, (ii) reducing the length of the organic ligand, and (iii) introducing additional acidic protons on the MOF surface. Increased framework proton density in these materials can lead to an enhancement in proton conductivity of up to 4 orders of magnitude. Additionally, we report a comprehensive investigation using in situ 2H NMR and neutron spectroscopy, coupled with molecular dynamic modeling, to elucidate the role of humidity in assembling interconnected networks for proton hopping. This study constructs a relationship between framework proton density and the corresponding proton conductivity in nonporous MOFs, and directly explains the role of both surface protons and external water in assembling the proton conduction pathways.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Size-Matching Ligand Insertion in MOF-74 for Enhanced CO 2 Capture under Humid Conditions

Among various class of materials, metal organic frameworks (MOFs) are one of the most promising candidates for CO2 capture from flue gases. In particular, M-MOF-74, where M represents different metals, are equipped with open metal sites that can lead to very high CO2 uptake at postcombustion flue gas conditions. However, these structures are known to have poor CO2 capture performance under humid conditions as water molecules bind strongly to the unsaturated metal sites, outcompeting the CO2. In this computational study, a pore space partition strategy is employed through a symmetry-matching regulated ligand insertion within the Mg-MOF-74 and Zn-MOF-74 structures, which mitigates the deterioration effect of water. In the case of Zn-MOF-74, higher selectivity as well as larger CO2 uptake in binary mixture conditions is obtained, thereby demonstrating that reduction in the pore size of MOFs can serve as viable strategy to capture CO2 under humid postcombustion conditions.

Suh, Bong Lim↗
DOE OSTI2018

Reactive Adsorption of Humid SO 2 on Metal–Organic Framework Nanosheets

We explore the interactions of copper, zinc, and cobalt metal–organic framework (MOF) nanosheets with sulfur dioxide (40 ppm in air of 85% relative humidity at 25 °C), with the aim of understanding chemically induced structural changes of open-metal MOFs when exposed to wet acid gases such as flue gas. The structural evolution of the frameworks and the sulfur dioxide adsorption characteristics were studied by vibrational spectroscopy, powder X-ray diffraction, X-ray photoelectron spectroscopy, and scanning electron microscopy. The stabilities of the materials under the experimental conditions were established as a function of the metal center, with zinc benzenedicarboxylate (ZnBDC) being the most stable followed by CuBDC and CoBDC. After 80 ppm-days of exposure to humid SO 2 atmosphere, each MOF was found to contain roughly one sulfur atom per metal site. Adsorbed sulfur was found in the +6 and +2 oxidation states with the distribution across these states varying according to the metal in the material. The implication of this finding is that the aqueous chemistry of adsorbed sulfur dioxide is strongly influenced by the metal center. The ability to direct electron transfer to or from adsorbed sulfur while maintaining comparable particle and crystal structure is a powerful potential tool for desulfurization technologies.

36 MATERIALS SCIENCE↗
DOE OSTI2018

DMOF-1 as a Representative MOF for SO 2 Adsorption in Both Humid and Dry Conditions

The mixed-ligand metal–organic framework (MOF) DMOF-1 has been successfully synthesized via ligand: 2,3,5,6-tetramethylterephthalic acid (TM), 9,10-anthracenedicarboxylic acid (ADC), 1,4-naphthalenedicarboxylic acid (NDC), 2,5-dimethyl terephthalic acid (DM), and metal (Zn, Cu, Ni, Co) substitutions to develop structure–property relationships for adsorption of water and SO 2 , an acid gas commonly found in flue gas streams at ppm-level concentrations. The substitution of bulky ligands, TM and ADC, resulted in not only improved water stability but also stability toward dry SO 2 , whereas substitution with NDC and DM did not provide water or SO 2 stability. ADC-functionalized Zn–DMOF exhibited the greatest stability under humid SO 2 exposure of the ligand-functionalized materials that were tested. Metal substitution of Cu into the DMOF–TM structure resulted in the greatest stability of the M–DMOF–TM samples upon exposure to humid SO 2 , and Ni–DMOF–TM provided the second most stable material. Finally, these results follow the prediction of the Irving–Williams series of metal node/ligand bond strengths.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Humidity Exposure Enhances Microscopic Mobility in a Room-Temperature Ionic Liquid in MXene

Present and future electrochemical devices employing advanced electrode and electrolyte materials are expected to operate in diverse environments, where they are exposed to variable conditions, such as changing humidity levels. Such conditions can possibly alter the microscopic mechanisms that influence the electrochemical performance. Here in this paper, using quasi-elastic neutron scattering and molecular dynamics simulations, we investigate the influence of humidity exposure on a room-temperature ionic liquid, [EMIm + ][Tf 2 N – ], in Ti 3 C 2 T x MXene. Absorbed water enhances the microscopic mobility of confined [EMIm + ][Tf 2 N – ], even though the ionic liquid itself is not very hygroscopic. The absorbed water molecules predominantly reside on the termination groups of the more hydrophilic MXene layers, thereby displacing the ions from the surface and facilitating their motions in the MXene matrix.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Evaporation Kinetics of Laboratory Generated Secondary Organic Aerosols at Elevated Relative Humidity

Secondary organic aerosols (SOA) dominate atmospheric organic aerosols that affect climate, air quality, and health. Recent studies indicate that, contrary to previously held assumptions, at low relative humidity (RH) these particles are semi-solid and evaporate orders of magnitude slower than expected. Elevated relative humidity has the potential to affect significantly formation, properties, and atmospheric evolution of SOA particles. Here we present a study of the effect of RH on the room-temperature evaporation kinetics of SOA particles formed by ozonolysis of α-pinene and limonene. Experiments were carried out on SOA particles generated, evaporated, and aged at 0%, 50% and 90% RH. We find that in all cases evaporation begins with a relatively fast phase, during which 30% to 70% of the particle mass evaporates in 2 hours, followed by a much slower evaporation rate. Evaporation kinetics at 0% and 50% RH are nearly the same, while at 90% RH a slightly larger fraction evaporates. In all cases, aging the particles prior to inducing evaporation reduces the evaporative losses, with aging at elevated RH leading to more significant effect. In all cases, SOA evaporation is nearly size-independent, providing direct evidence that oligomers play a crucial role in determining the evaporation kinetics.

Environmental Molecular Sciences Laboratory↗
DOE OSTI2022

Lower Urban Humidity Moderates Outdoor Heat Stress

Abstract Surface temperature is often used to examine heat exposure in multi‐city studies and for informing urban heat mitigation efforts due to scarcity of urban air temperature measurements. Cities also have lower relative humidity, traditionally not accounted for in large‐scale observational urban heat risk assessments. Here, using crowdsourced measurements from over 40,000 weather stations in ≈600 urban clusters in Europe, we show the moderating effect of this urbanization‐induced humidity reduction on outdoor heat stress during the 2019 heatwave. We demonstrate that daytime differences in heat index between urban clusters and their surroundings are weak, and associations of this urban‐rural difference with background climate, generally examined from the surface temperature perspective, are diminished due to moisture feedbacks. We also examine the spatial variability of surface temperature, air temperature, and heat index within these clusters—relevant for detecting hotspots and potential disparities in heat exposure—and find that surface temperature is a poor proxy for the intra‐urban distribution of heat index during daytime. Finally, urban vegetation shows much weaker (∼1/6th as strong) associations with heat index than with surface temperature, which has broad implications for optimizing urban heat stress mitigation strategies. These findings are valid for operational metrics of heat stress for shaded conditions (apparent temperature and humidex), thermodynamic proxies (wet‐bulb temperature), and empirical heat indices. Based on this large‐scale empirical evidence, surface temperature, used due to the lack of better alternatives, may not be suitable for accurately informing heat mitigation strategies within and across cities, necessitating more urban‐scale observations and better urban‐resolving models.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

The High-resolution Urban Meteorology for Impacts Dataset (HUMID) daily for the Conterminous United States

Many current gridded surface meteorological datasets are inadequate for quantifying near surface spatiotemporal variability because they do not fully represent the impacts of land surface heterogeneity. Of note, explicit representation of the spatial structure and magnitude of local urban warming are usually lacking. Here we enhance the representation of spatial meteorological variability over urban areas in the conterminous United States (CONUS) by employing the High-Resolution Land Data Assimilation System (HRLDAS), which accounts for the fine-scale impacts of spatiotemporally varying land surfaces on weather. We also synthesize in situ meteorological data including local mesonets to create a 1 km grid spacing model-observation fusion product spanning 1981-2018 over the CONUS. Daily maximum, minimum, and mean values for a variety of temperature estimates, humidity, and surface energy budget terms, among others, are included. This High-resolution Urban Meteorology for Impacts Dataset (HUMID) will be useful for studies examining spatial variability of near surface meteorology and the impacts of urban heat islands across many disciplines including epidemiology, ecology, and climatology.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2017

Multi-mode humidity sensing with water-soluble copper phthalocyanine for increased sensitivity and dynamic range

Aqueous solubility of copper phthalocyanine-3,4',4',4"'-tetrasulfonic acid tetrasodium salt (CuPcTs) enables fabrication of flexible electronic devices by low cost inkjet printing. We (1) investigate water adsorption kinetics on CuPcTs for better understanding the effects of relative humidity (RH) on hydrophilic phthalocyanines, and (2) assess CuPcTs as a humidity-sensing material. Reaction models show that H 2 O undergoes 2-site adsorption which can be represented by a pair of sequentially-occurring pseudo-first order reactions. Using high frequency (300–700 THz) and low frequency (1–8 MHz) dielectric spectroscopy combined with gravimetric measurements and principal component analysis, we observe that significant opto-electrical changes in CuPcTs occur at RH ≈ 60%. The results suggest that rapid H 2 O adsorption takes place at hydrophilic sulfonyl/salt groups on domain surfaces at low RH, while slow adsorption and diffusion of H 2 O into CuPcTs crystallites leads to a mixed CuPcTs-H 2 O phase at RH > 60%, resulting in high frequency dielectric screening of the film by water and dissociation of Na+ from CuPc(SO 3 -) 4 ions. Lastly, the CuPcTs-H 2 O interaction can be tracked using a combination of gravimetric, optical, and electrical sensing modes, enabling accurate ( ± 2.5%) sensing in the ~0–95% RH range with a detection limit of less than 0.1% RH.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Retrieval of high time resolution growth factor probability density function from a humidity-controlled fast integrated mobility spectrometer

Hygroscopicity describes the tendency of aerosol particle to uptake water and is among the key parameters in determining the impact of atmospheric aerosols on global radiation and climate. A hygroscopicity tandem differential mobility analyzer (HTDMA) system is the most widely utilized instrument for determining the aerosol hygroscopic growth. Because of the time needed to scan the classifying voltage of the DMA, HTDMA measurement normally requires a minimum of 30 min to characterize the particle hygroscopic growth at a single relative humidity for five to six different sizes. This slow speed is often inadequate for measurements onboard mobile platforms or when aerosols evolve rapidly. Recently, a humidity-controlled fast integrated mobility spectrometer (HFIMS) was developed for measuring the hygroscopic growth of particles. The measurement speed of the HFIMS is about one order of magnitude faster than that of the conventional HTDMA. Here, a data inversion routine is developed to retrieve the growth factor probability density function (GF-PDF) of particles measured by the HFIMS. The inversion routine considers the transfer functions of the upstream DMA and the downstream water-based fast integrated mobility spectrometer (FIMS), and derives the GF-PDF that reproduces the measured responses of the HFIMS. The performance of the inversion routine is examined using ambient measurements with different assumptions for the spectral shape of the particle GF-PDF (multimodal lognormal or piecewise linear). The influences of the data inversion parameters and counting statistics on the inverted GF-PDFs were further investigated, and an approach to determine the optimized inversion parameters is presented.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Probing adsorbates on La1-xSrxNiO3-d surfaces under humid conditions: implications for the oxygen evolution reaction

Earth-abundant nickel-containing perovskite oxides (ANiO3) are highly active materials for the oxygen evolution reaction (OER). The strong nickel-oxygen (Ni-O) covalency, tunable by A-site chemical substitution, contributes to both bulk and surface material properties like the formation of oxygen vacancies (????••) and OER activity. Here we quantify the coverage of OER relevant adsorbates on a series of La1-xSrxNiO3-d (LSNO, 0 = x = 0.5) epitaxial thin films exposed to humid environments by ambient pressure X-ray photoelectron spectroscopy (AP-XPS). While all LSNO film compositions investigated here have comparable hydroxide coverages at the relative humidities (RHs) probed (1.5 x 10-5 – 0.2 %RH), the amount of under-coordinated surface oxygen increases notably with Sr content. We interpret differences in the free energy of adsorption (?Gads,i) of these OER intermediates, inferred from adsorption isotherms, in the context of proposed ????••-mediated OER mechanisms, consistent with the pH-dependent OER activity observed here for LSNO. We find that Sr incorporation enhances the affinity of LSNO surfaces for these under-coordinated oxygen species, in line with calculations in the literature.

Rare-earth nickelates, ambient pressure-X-ray phot↗
DOE OSTI2022

Experimental and modeling studies of the plasma chemistry in a humid Ar radiofrequency atmospheric pressure plasma jet

Abstract While humid atmospheric pressure plasmas are extensively modeled, reaction set validation for these conditions remains limited. We present a detailed comparison of a modelling and experimental study with a goal to elucidate the plasma chemistry in a humid Ar radiofrequency-driven atmospheric pressure plasma jet. A large group of species including radicals (H, OH, O, HO 2 ) and long-lived species (H 2 , O 2 and H 2 O 2 ) in the jet effluent was experimentally quantified by molecular beam mass spectroscopy (MBMS). MBMS measurements of H 2 O 2 , OH and H were validated by direct comparison with a liquid phase colorimetric measurement, laser-induced fluorescence (LIF) and two-photon absorption LIF respectively. While an excellent agreement was found for OH and H 2 O 2 by both techniques, a significant difference was found for H and shown to be due to boundary layer effects at the MBMS sampling substrate. The measured O, OH, HO 2 and H 2 are in good agreement with the plug model while H and O 2 were underestimated and H 2 O 2 was overestimated by the model. The accuracy of both the used reaction set and the diagnostics, as well as the observed discrepancies between the modeling and experimental results, are critically assessed. The results presented in this work enable us to identify further data needs for describing H 2 O vapor chemistry in low-temperature plasmas.

Physics↗