Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “high energy x-ray diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Discovery of a Stripe Phase in an Elemental Solid

Translational symmetry breaking is foundational to condensed matter physics because it is associated with crystal formation. At much lower energy scales, the breaking of crystalline translational symmetry can be driven by electronic, rather than ionic, degrees of freedom and may give rise to stripe order, a unidirectional ordered state. Such symmetry breaking has been seen in two-dimensional and strongly correlated systems. Here, for the first time, we report the observation of stripe order in an elemental solid, tellurium. Through topographic and spectroscopic imaging, we discover a commensurate 4 × 1 stripe phase. Surprisingly, this exotic order is so robust that it survives close to room temperature. Notably, our diffraction experiments confirm the bulk nature of the stripe order, showing the minuteness of potential lattice distortion associated with the order. In conclusion, our discovery of the stripe order in tellurium opens new windows to understanding the spontaneous symmetry breaking in elemental solids.

charge order↗
DOE OSTI2025

Femtosecond temperature measurements of laser-shocked copper deduced from the intensity of the x-ray thermal diffuse scattering

We present 50-fs, single-shot measurements of the x-ray thermal diffuse scattering (TDS) from copper foils that have been shocked via nanosecond laser ablation up to pressures above ∼135 GPa. We hence deduce the x-ray Debye–Waller factor, providing a temperature measurement. The targets were laser-shocked with the DiPOLE 100-X laser at the High Energy Density endstation of the European X-ray Free-Electron Laser. Single x-ray pulses, with a photon energy of 18 keV, were scattered from the samples and recorded on Varex detectors. Despite the targets being highly textured (as evinced by large variations in the elastic scattering) and with such texture changing upon compression, the absolute intensity of the azimuthally averaged inelastic TDS between the Bragg peaks is largely insensitive to these changes, and allowing for both Compton scattering and the low-level scattering from a sacrificial ablator layer provides a reliable measurement of $T/Θ^2_D$, where Θ D is the Debye temperature. We compare our results with the predictions of the SESAME 3336 and LEOS 290 equations of state for copper and find good agreement within experimental errors. We, thus, demonstrate that single-shot temperature measurements of dynamically compressed materials can be made via thermal diffuse scattering of XFEL radiation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Nanohybrid of Silver‐MXene: A Promising Sorbent for Iodine Gas Capture from Nuclear Waste

The increasing reliance on nuclear energy as a significant low-carbon power source necessitates effective solutions for managing radioactive emissions. This study introduces a novel application of MXene nanohybrids, specifically silver-MXene (Ag-Ti 3 C 2 T x ), as an effective sorbent for radioiodine off-gas capture at an operating temperature of 150 °C. Through comprehensive material characterization, including X-ray diffraction, scanning and transmission electron microscopies, energy-dispersive X-ray spectroscopy, Raman spectroscopy, thermogravimetric analysis, inductively coupled plasma optical emission spectroscopy, and gas sorption analyses, the successful loading of Ag nanoparticles onto Ti 3 C 2 T x is confirmed and the subsequent formation of AgI upon iodine capture. The results demonstrate that Ag-Ti 3 C 2 T x exhibits superior iodine uptake compared to traditional silver-based sorbents such as silver mordenite zeolite (AgZ) and silver-functionalized silica aerogel (AgAero). The Ag-Ti 3 C 2 T x achieves an iodine loading of 946 mg g −1 , significantly outperforming AgZ (131 mg g −1 ). These findings highlight the potential of Ag-Ti 3 C 2 T x as a highly efficient, thermally stable sorbent for radioiodine capture, and potentially addressing key limitations of existing materials.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2025

Pristine Interface between Lithium Lanthanum Zirconate and Lithium Manganese Oxide by Pulsed Laser Deposition

Solid state lithium-ion batteries have garnered increasing interest in recent years due to several potential advantages over liquid-electrolyte based systems. The possibility of integrating the lithium garnet oxide, Li 6.75 La 3 Zr 1.75 Ta 0.25 O 12 (LLZTO), with the high voltage cathode, spinel Li x Mn 2 O 4 (LMO), is evaluated here. Thin film bilayer structures are prepared by pulsed laser deposition on MgO (001) substrates and characterized by x-ray diffraction and transmission electron microscopy. The LLZTO is grown by an alternating layer-by-layer deposition of LLZTO and Li 3 N and subsequently annealed for several hours at 575 °C to promote crystallinity. Growth of crystalline LMO with a pristine interface to LLZTO is achieved by gentle heat treatment (500 °C) to remove surface carbonate from the electrolyte and by cathode growth at a low temperature of 250 °C. Higher temperature depositions (330 – 450 °C) result in reaction between the two materials and the appearance of Li 2 MnO 3 , which may be in part due to the presence of excess lithium in the electrolyte layer. Because fully lithiated LiMn 2 O 4 has a voltage of ≈3.7 V versus Li+/Li, the observation of a well-defined interface, free of impurity phases and with no interdiffusion of elements, indicates LLZTO is stable to at least 3.7 V.

Garnet LLZO↗
DOE OSTI2025

Demonstration of the Reproducibility Challenges in the Sintering Behavior of Lithium‐Stuffed Garnets in Scaling up Synthesis

Lithium-stuffed garnets, such as Li 7 La 3 Zr 2 O 12 (LLZO), are promising candidates for next-generation solid-state batteries because of their high room-temperature ionic conductivity and chemical stability against lithium metal anodes, which are crucial for achieving higher energy density. However, realizing LLZO's potential in practical devices requires synthesis methods that can be scaled reliably to large batch sizes for manufacturing. Herein, we investigate the sintering reproducibility of LLZO synthesized at larger scales using ultrasonic spray pyrolysis, a cost-effective and scalable synthesis route. Two 100 g batches of Al-doped LLZO are prepared and their sintering behavior is examined in detail. Both Al-LLZO batches contain over 90 wt.% cubic-phase LLZO, and both batches exhibit room temperature conductivities greater than 1 × 10 −4 S cm −1 at a relative density above 0.8. However, variations in secondary phases and subtle differences in Al content lead to significant differences in densification and microstructure. These results demonstrate that LLZO's sintering behavior is highly sensitive to small changes in secondary phases and Al content, creating reproducibility challenges when moving from laboratory- to manufacturing-scale synthesis.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Co‐Electrolysis of CO 2 and H 2 O to Syngas on Bimetallic Pd x Cu 1‐ x Catalysts for Tandem Thermochemical Conversion to Carbon Nanofibers

Electrification of chemical production using renewable energy and abundant feedstocks offers a promising pathway for decarbonizing the chemical industry. Current efforts on CO 2 valorization largely focus on making chemicals and fuels. Here, to help achieve net-negative emissions through long-term carbon storage, this study aims to develop efficient electrocatalysts for a tandem electrochemical-thermochemical process to convert CO 2 into carbon nanofibers (CNFs). CO 2 and water are first electrochemically reduced in a membrane electrode assembly (MEA) electrolyzer to produce syngas (CO + H 2 ), which is subsequently fed into a thermochemical packed bed reactor to facilitate CNF growth. This work systematically evaluated Pd x Cu 1-x bimetallic electrocatalysts to assess the effect of Pd–Cu alloying on enhancing syngas production while reducing Pd loading. Transmission electron microscopy and Raman spectroscopy confirmed the formation of high-purity, crystalline CNFs, regardless of the syngas composition from the MEA. In situ X-ray absorption spectroscopy and X-ray diffraction measurements revealed that increasing Cu content in the Pd x Cu 1-x alloy progressively inhibited palladium hydride formation, consistent with DFT calculations on the stability of Pd x Cu 1-x under reducing electrochemical potentials.

58 GEOSCIENCES↗
DOE OSTI2024

Laboratory-Based Micro-X-ray Computed Tomography of Energy Materials at Idaho National Laboratory

Abstract The Idaho National Laboratory (INL) has implemented laboratory-based micro-X-ray computed tomography in a laboratory equipped for the examination of highly radioactive samples. This capability provides nondestructive three-dimensional volumetric information on samples to inform subsequent traditional destructive examinations as well as real-world inputs for high-fidelity scientific modeling. Samples can be imaged with spatial resolutions ranging from several hundred nm/voxel up to ~ 100 µm/voxel. The best usable spatial resolution achieved to date is 384 nm/voxel with this instrument, while the highest radiological dose rate of a sample imaged is ~ 60 R/h β/γ on contact. Advanced data analysis, including custom tomographic reconstruction and segmentation methods, have also been developed to support this capability. In addition to traditional digital X-ray radiography and tomography, this instrument is also able to visualize in situ tensile and compression testing as well as perform diffraction contrast tomography. This work describes the X-ray computed tomography post-irradiation examination capabilities at INL, as well as detailing a variety of applications this instrument has examined.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Heterostructured nano-catalysts with efficient metal-oxide interfaces unlock high-performance direct methanol protonic ceramic fuel cells

Direct methanol protonic ceramic fuel cells (PCFCs) are attractive due to their low cost, convenient storage, and high volumetric energy density, as well as their suitability for transportation. However, the poor coking tolerance of conventional nickel-based anodes leads to their susceptibility to severe carbon deposition and significant deactivation after long-term exposure to hydrocarbons. Herein, we report a nano-catalyst of Ce 0.6 Ni 0.2 Cu 0.2 O 2 with a heterogeneous structure that is spontaneously reduced into a Ce 0.6 Ni 0.2-x Cu 0.2-x O 2-δ (CeNCO) oxide framework interfaced with a nano NiCu alloy (denoted as NC/CeNCO) under operating conditions, as confirmed by analyses of X-ray diffraction, X-ray photoelectron spectroscopy, scanning electron microscopy, and transmission electron microscopy. A Ni-BaCe 0.7 Y 0.06 Yb 0.06 Zr 0.06 Hf 0.06 Gd 0.06 O 3-δ anode-supported PCFC employing the NC/CeNCO metal-oxide catalyst achieved a peak power density of 1.11 W cm −2 and operational stability of about 100 h at 700 °C when fueled by 35 % CH 3 OH-15 % H 2 O-50 % N 2 . In conclusion, the enhanced performance and coking resistance are attributed to the efficient interfaces of Ni, Cu, and ceria-based oxide in NC/CeNCO for CH 3 OH reforming, as confirmed by analyses of electrochemical performance and Raman spectroscopy with density functional theory calculations, revealing that these interfaces can enhance CH 3 OH activation and promote efficient OH-mediated carbon removal via COH intermediates.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2025

Theory meets experiment: Insights into structure and magnetic properties of Fe 1-x Ni x B alloy

Here, we studied the structural and magnetic properties of the solid solution Fe 1-x Ni x B through theoretical and experimental approaches. Powder X-ray diffraction, X-ray Pair Distribution Function analysis, and energy dispersive X-ray spectroscopy reveal that the Fe 1-x Ni x B solid solution crystallizes in the β-FeB structure type up to x = 0.6–0.7 and exhibits anisotropic unit cell volume contraction with increasing Ni concentration. Magnetic measurements showed a transition from ferromagnetism to paramagnetism around x = 0.7. For x = 0.5, the low (< 0.3 μ B ) magnetic moments suggest itinerant magnetism despite the relatively high Curie temperature (up to 225 K). Theoretical calculations indicated different types of magnetic orderings depending on the Fe/Ni atomic order, with the antiferromagnetic state being stable for ordered FeNiB 2 , whereas the ground state is ferromagnetic for the disordered alloy. Calculations also predicted the coexistence of low- and high-spin states in Fe atoms around the composition with x = 0.5, in line with the experimental evidence from 57 Fe Mössbauer spectroscopy. The two magnetically distinct Fe sites for x = 0.3, 0.4, and 0.5 observed by 57 Fe Mössbauer spectroscopy can also be interpreted as two magnetically different regions or clusters. The formation of these clusters could affect the critical behavior near a quantum magnetic transition based on a potential ferromagnetic quantum critical point identified computationally and experimentally near x = 0.64. This work highlights the complex interplay between structure and magnetism in Fe 1-x Ni x B alloys, suggesting areas for future research on quantum critical behavior.

Bhaskar, Gourab [Iowa State Univ., Ames, IA (Unite↗
DOE OSTI2025

Solving the “Coloring Problem” in InPd 3– x Ag x ( x = 0–0.7) by Phase Diagrams Modeling and Diffraction Experiments

Here, a series of InPd 3–x Ag x (x = 0–1) compositions were synthesized by conventional high-temperature synthesis, and as-synthesized samples were characterized by powder X-ray diffraction experiments. Up to x = 0.7, InPd 3–x Ag x adopts the ternary substitutional variant of the InPd 3 structure (TiAl 3 -type), when x > 0.7, elemental Ag starts to segregate along with the main phase. Accurate structural characterization in InPd 3–x Ag x faces a critical challenge due to the narrow X-ray scattering contrast among constituents In, Pd, and Ag and nearly identical neutron scattering lengths of Pd and Ag. To overcome this “coloring problem”, a combination of calculation of phase diagrams modeling (CALPHAD) and diffraction techniques (X-ray and neutron) was employed. In the compositional range 0 ≤ x ≤ 0.7, InPd 3–x Ag x presents a ternary variant of the TiAl 3 -type structure, where Ag atoms selectively substitute one (the 2b Wyckoff site) of the two Pd sites in InPd 3 . Notably, in contrast to the isologous InPd 3–x Cu x (x = 0–1) system, Ag substitution does not form an ordered VRh 2 Sn-type structure at the limiting composition. The distinct site preference in InPd 3–x Ag x is elucidated by charge population analysis, electronic structure calculations, and orbital-resolved chemical bonding investigations, and the extent of substitution is supported by formation free energy calculations.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Chemical Compensation Challenges in Processing Antiferroelectric PbZrO 3 Thin Films

The electric field-induced antipolar-to-polar phase transition in antiferroelectric materials is accompanied by large changes in the structural and functional response, making them attractive for many applications ranging from pulsed energy capacitors to high-strain-high (blocking-)force actuators, solid-state heating and cooling systems, and optoelectronic devices. PbZrO 3 , as an end member of the PZT, (x)PbZr 1–x Ti x O 3 , solid solution, has been the subject of many studies. However, processing of perovskite PbZrO 3 is extremely challenging due to phase instabilities induced by Pb loss at the temperatures necessary for perovskite crystallization. Here, we discuss the challenges associated with Pb loss, as well as its compensation through bulk Pb overstoichiometry and interfacial PbO additions, in chemical solution processed, highly oriented PbZrO 3 thin films. For both 042 o - and 001 o -oriented (o-orthorhombic distortion) PbZrO 3 thin films, the crystallization interfaces are the most important contributors to Pb loss and off-stoichiometric outcomes, and no single approach was sufficient to address these challenges. Pb-rich and Pb-deficient nonperovskite phases including ZrO x were only observable through microscopic characterization, and X-ray diffraction alone could not rule out the presence of such secondary phases. “Ideal” macroscopic antiferroelectric polarization-electric field double hysteresis curves were observed despite (at times) the large presence of secondary phases. However, reduced saturation polarization and increased phase transition electric fields were observed concomitantly with the presence of secondary phase(s) and tentatively assigned to the voltage drop across the ZrO x nanocrystals. Based on these results, it is imperative that the presence of secondary phases always be addressed (beyond X-ray diffraction spectra) in order to correctly evaluate the properties of antiferroelectric films.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Large Hyperfine Coupling Arising from Pseudo- 2 S Ground States in a Series of Lutetium(II) Metallocene Complexes

The synthesis of molecules with strong coupling between electronic and nuclear spins represents an important challenge in molecular quantum information science. Here, we report the synthesis and characterization of the divalent lutetium metallocene complexes Lu(Cp Me 5 )(Cp iPr 5 ) (Cp Me 5 = pentamethylcyclopentadienyl; Cp iPr 5 = pentaisopropylcyclopentadienyl), Lu(Cp iPr 4 Et ) 2 (Cp iPr 4 Et = ethyltetraisopropylcyclopentadienyl), and Lu(Cp iPr 4 ) 2 (Cp iPr 4 = tetraisopropylcyclopentadienyl). The molecular structures of these complexes, as determined through singlecrystal X-ray diffraction, feature a common bent sandwich geometry, with average Cp–Lu–Cp angles ranging from 159.9° to 152.6°. Analysis of continuous-wave electron paramagnetic resonance (EPR) spectra for the complexes reveals nearly isotropic g tensors with only a slight deviation from that of a free electron. Moreover, an extremely large splitting of the eight-line spectra indicates the presence of strong hyperfine coupling, and simulations provide isotropic hyperfine coupling constants of A iso = 4.38, 4.30, and 4.17 GHz across the series, where the value of A iso is found to decrease as the Cp–Lu–Cp angle becomes more acute. Notably, these values are the largest yet observed for any lanthanide complex. Moreover, EPR and computational analysis show that the large values of A iso stem from large s-orbital character up to 41.2% in the corresponding singly occupied molecular orbitals. To our knowledge, this degree of s-character in a molecular orbital is the largest yet reported for an open-shell isolable complex. These results outline a general strategy toward the isolation of paramagnetic molecules with strong hyperfine coupling and highly isotropic doublet electronic ground states.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Atomic layer deposition of nickel sulfide thin films and their thermal and electrochemical stability

Nickel sulfides (NiS x ) show promise for a range of energy and other applications, but their (in)stability under processing and operating conditions is scarcely studied. Herein, we have developed a new NiS x atomic layer deposition process using an easily synthesized NiCl 2 (TMPDA) precursor (TMPDA = N,N,N′,N′-tetramethyl-1,3-propanediamine) with H 2 S. Thin films deposited at 165–225 °C consist mostly of the β-NiS phase and display low resistivity (∼40–120 μΩ cm), high purity (<3 at% impurities), and a rough morphology. The thermal stability of the NiS x thin films is studied using high-temperature X-ray diffraction, revealing that structural and compositional changes occur in reducing, inert, and oxidizing atmospheres at approximately 300–400 °C. Under electrochemical water splitting conditions, the films are unstable in acid due to dissolution, especially at oxidizing potentials. In an alkaline electrolyte, we do not observe Ni dissolution, but β-NiS transforms to Ni 3 S 2 under HER conditions, possibly supplemented with Ni and/or Ni(OH) 2 species. Under alkaline OER, all sulfur is lost and NiOOH is formed. In addition to offering an attractive, scalable route to the synthesis of NiS x thin films, our work highlights the importance of thermal and electrochemical (in)stability of sulfides as a crucial step for understanding and engineering materials for energy and other applications.

Mattinen, Miika [Univ. of Helsinki (Finland); Stan↗
DOE OSTI2026

Collaborative R&D with REEL Solar Inc (REEL) to Understand and Overcome Performance Limitations in CdTe Solar Cells: Cooperative Research and Development (Final Report)

This CRADA will focus on processing, advanced characterization, and testing of photovoltaic materials and devices to understand and improve REEL CdTe solar technology. This will include examining process variations and different buffer, absorber, and contact layers from REEL and NLR to maximize performance. The unique and diverse advanced characterization tools at NLR, such as time-resolved photoluminescence, capacitance-voltage measurements, electron beam scattered diffraction, cathodoluminescence, electron microscopy, TOF-SIMS, and other measurements will be applied to characterize REEL processing to improve understanding and guide experimental directions. Accelerated stability and potential induced degradation tests will be used to analyze metastability, short-and-long term degradation, and improve bankability. A second and major thrust this period will be joint development of Si/CdTe tandem solar cells to overcome industry wide terrestrial solar efficiency limits with the two lowest cost and manufacturable solar materials today. This will include developing novel transparent back contacts that can be incorporated into tandem structures and other novel solar applications, detailed analysis of designs and configurations for CdTe/Si tandem modules, and prototyping REEL CdTe Technology with Si bottom cells in tandem structures.

14 SOLAR ENERGY↗
NASA NTRS1993

Multilayer diffraction at 104 keV

We have measured the diffraction peak of a W:Si synthetic multilayer reflector at 104 keV using the High Energy Bonse-Hart Camera at the X-17B hard X-ray wiggler beam line of the National Synchrotron Light Source at Brookhaven National Laboratory. The characteristics of the diffraction peak are described and compared to theory.

Krieger, Allen S.↗
NASA NTRS1996

Friction and Wear Properties of As-Deposited and Carbon Ion-Implanted Diamond Films

Recent work on the friction and wear properties of as-deposited and carbon ion-implanted diamond films was reviewed. Diamond films were produced by the microwave plasma chemical vapor deposition (CVD) technique. Diamond films with various grain sizes and surface roughnesses were implanted with carbon ions at 60 keV ion energy, resulting in a dose of 1.2 x 10(exp 17) carbon ions per cm(exp 2). Various analytical techniques, including Raman spectroscopy, proton recoil analysis, Rutherford backscattering, transmission and scanning electron microscopy, X-ray photoelectron spectroscopy, and X-ray diffraction, were utilized to characterize the diamond films. Sliding friction experiments were conducted with a polished natural diamond pin in contact with diamond films in the three environments: humid air (40% relative humidity), dry nitrogen (less than 1 percent relative humidity), and ultrahigh vacuum (10(exp -7) Pa). The CVD diamond films indeed have friction and wear properties similar to those of natural diamond in the three environments. The as-deposited, fine-grain diamond films can be effectively used as self-lubricating, wear-resistant coatings that have low coefficients of friction (0.02 to 0.04) and low wear rates (10(exp -7) to lO(exp -8) mm(exp 3) N(exp -1) m(exp -1)) in both humid air and dry nitrogen. However, they have high coefficients of friction (1.5 to 1.7) and a high wear rate (10(exp -4) mm(exp 7) N(exp -1) m(exp -1)) in ultrahigh vacuum. The carbon ion implantation produced a thin surficial layer (less than 0.1 micron thick) of amorphous, non-diamond carbon on the diamond films. In humid air and dry nitrogen, the ion-implanted, fine and coarse-grain diamond films have a low coefficient of friction (around 0.1) and a low wear rate (10(exp -7) mm(exp 3) N(exp -1) m(exp-1)). Even in ultrahigh vacuum, the presence of the non-diamond carbon layer reduced the coefficient of friction of fine-grain diamond films to 0.1 or lower and the wear rate to 10(exp -6) mm(exp 3) N(exp -1) m(exp -1). Thus, the carbon ion-implanted, fine-grain diamond films can be effectively used as wear-resistant, self-lubricating coatings not only in air and dry nitrogen, but also in ultrahigh vacuum.

Miyoshi, Kazuhisa↗
NASA NTRS1998

Magnesium-Aluminum-Zirconium Oxide Amorphous Ternary Composite: A Dense and Stable Optical Coating

In the present work, the process parameter dependent optical and structural properties of MgO-Al(2)O(3)-ZrO(2) ternary mixed-composite material have been investigated. Optical properties were derived from spectrophotometric measurements. The surface morphology, grain size distributions, crystallographic phases and process dependent material composition of films have been investigated through the use of Atomic Force Microscopy (AFM), X-ray diffraction analysis and Energy Dispersive X- ray (EDX) analysis. EDX analysis made evident the correlation between the optical constants and the process dependent compositions in the films. It is possible to achieve environmentally stable amorphous films with high packing density under certain optimized process conditions.

Sahoo, N. K.↗
NASA NTRS1999

Growth of Homoepitaxial ZnO Semiconducting Films

As a high temperature wide-band-gap (3.3 eV at room temperature) semiconductor, ZnO has been used for many applications such as wave-guides, solar cells, and surface acoustic wave devices, Since ZnO has a 60 meV excitonic binding energy that makes it possible to produce excitonic lasing at room temperature, a recent surge of interest is to synthesize ZnO films for UV/blue/green laser diodes. These applications require films with a smooth surface, good crystal quality, and low defect density. Thus, homoepitaxial film growth is the best choice. Homoepitaxial films have been studied in terms of morphology, crystal structure, and electrical and optical properties. ZnO single crystal substrates grown by the hydrothermal method are mechanically polished and annealed in air for four hours before the films are deposited. The annealing temperature-dependence on ZnO substrate morphology and electrical properties is investigated. Films are synthesized by off-axis reactive sputtering deposition. This produces films that have very smooth surfaces with roughness less than or equal to 5 nm on a 5 microns x 5 microns area. The full width at half maximum of film theta rocking curves measured by the x-ray diffraction is slightly larger than that of the crystal substrate. Films are also characterized by measuring resistivity, optical transmittance, and photoluminescence. The properties of ZnO films grown on (0001) ZnO and (0001) sapphire substrates will also be compared and discussed.

Zhu, Shen↗