Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “graphene oxide”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Density Functional Theory Investigation of the NiO@Graphene Composite as a Urea Oxidation Catalyst in the Alkaline Electrolyte

Developing efficient and low-cost urea oxidation reaction (UOR) catalysts is a promising but still challenging task for environment and energy conversion technologies such as wastewater remediation and urea electrolysis. In this work, NiO nanoparticles that incorporated graphene as the NiO@Graphene composite were constructed to study the UOR process in terms of density functional theory. The single-atom model, which differed from the previous heterojunction model, was employed for the adsorption/desorption of urea and CO 2 in the alkaline media. As demonstrated from the calculated results, NiO@Graphene prefers to adsorb the hydroxyl group than urea in the initial stage due to the stronger adsorption energy of the hydroxyl group. After NiOOH@Graphene was formed in the alkaline electrolyte, it presents excellent desorption energy of CO 2 in the rate-determining step. Electronic density difference and the d band center diagram further confirmed that the Ni(III) species is the most favorable site for urea oxidation while facilitating charge transfer between urea and NiO@Graphene. Moreover, graphene provides a large surface for the incorporation of NiO nanoparticles, enhancing the electron transfer between NiOOH and graphene and promoting the mass transport in the alkaline electrolyte. Notably, this work provides theoretical guidance for the electrochemical urea oxidation work.

25 ENERGY STORAGE↗
NASA NTRS2015

Large Scale Reduction of Graphite Oxide Project

This project seeks to develop an optical method to reduce graphite oxide into graphene efficiently and in larger formats than currently available. Current reduction methods are expensive, time-consuming or restricted to small, limited formats. Graphene has potential uses in ultracapacitors, energy storage, solar cells, flexible and light-weight circuits, touch screens, and chemical sensors. In addition, graphite oxide is a sustainable material that can be produced from any form of carbon, making this method environmentally friendly and adaptable for in-situ reduction.

Technology Portfolio System↗
DOE OSTI2025

Copper-containing layered oxide cathodes for sodium-ion batteries

Layered transition metal oxides are among the most promising cathode materials for sodium-ion batteries due to their high theoretical capacity, structural tunability, and cost-effectiveness. However, conventional Ni- and Co-based layered oxides are hindered by high raw material costs, limited elemental abundance, and phase instability during electrochemical cycling. Recently, copper has emerged as an attractive alternative transition metal, offering significant advantages in terms of redox activity, structural stabilization, voltage regulation, and rate performance. Unlike Ni and Co, Cu can facilitate unique redox mechanisms and enable more sustainable material design. This review systematically summarizes recent progress on Cu-containing layered sodium oxides, with emphasis on their structural characteristics, electrochemical behavior, and the critical roles that Cu plays within the host lattice. The insights provided herein aim to highlight the potential of Cu-substituted or Cu-containing layered oxides as a viable pathway toward high-performance and resource-accessible SIB cathodes for future energy storage applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Enhancement of effective thermal conductivity of rGO/Mg nanocomposite packed beds

Engineering thermophysical properties of metal hydrides nanocomposites is crucial for effective thermal management during hydrogen storage reactions; however, the effect of microstructure on thermal transport mechanisms is still unclear. Here, we employed an integrated experiment-modeling approach to investigate microstructural factors that determine the effective thermal conductivity of individual reduced graphene oxide-magnesium (rGO/Mg) nanocomposites and their packed bed. Here the effective thermal conductivity of the rGO/Mg nanocomposite packed bed was measured by using guarded hot-plate method under various atmospheric conditions (i.e., vacuum, Ar and He). A microstructure-aware mesoscopic modeling revealed that anisotropy of the effective thermal conductivity of individual rGO/Mg nanocomposites plays an important role in determining the effective thermal conductivity of their packed bed. The validated mesoscopic model also disclosed a nontrivial interplay between the intrinsic rGO properties and the extrinsic composite structural features. Finally, quantitative sensitivity analysis based on the modeling framework is used to provide practical engineering guidance for controlling the thermal transport within nanocomposite packed beds.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Remote surface optical phonon scattering in ferroelectric Ba 0.6 Sr 0.4 TiO 3 gated graphene

We report the effect of remote surface optical (RSO) phonon scattering on carrier mobility in monolayer graphene gated by ferroelectric oxide. We fabricate monolayer graphene transistors back-gated by epitaxial (001) Ba 0.6 Sr 0.4 TiO 3 films, with field effect mobility up to 23 000 cm 2 V –1 s –1 achieved. Switching ferroelectric polarization induces nonvolatile modulation of resistance and quantum Hall effect in graphene at low temperatures. Ellipsometry spectroscopy studies reveal four pairs of optical phonon modes in Ba 0.6 Sr 0.4 TiO 3 , from which we extract RSO phonon frequencies. The temperature dependence of resistivity in graphene can be well accounted for by considering the scattering from the intrinsic longitudinal acoustic phonon and the RSO phonon, with the latter dominated by the mode at 35.8 meV. Furthermore, our study reveals the room temperature mobility limit of ferroelectric-gated graphene transistors imposed by RSO phonon scattering.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Examination of actinide chemistry at solid-water interfaces to support advanced actinide separations (Final Report)

In this work we have examined the thermodynamics of actinide interactions with solid interfaces in the presence and absence of multi-functional complexing ligands. The term “interactions” is a global term to capture many potential reactions including aqueous complexation, sorption/surface complexation, surface-mediated redox reactions, electrostatic attraction and repulsion, surface passivation, surface precipitation, and counter-ion competition. Each of these potential reactions may control actinide interactions with a solid surface. This work is helping to develop a more fundamental understanding of actinide bonding at solid:water interfaces and examine unique surface mediated oxidation/reduction reactions which are not expected based on the reduction potentials of aqueous species. We place a large emphasis on understanding both sorption and desorption processes as a means of understanding the sorption mechanisms. This work is directly aligned with the DOE BES Heavy Element Chemistry programs interests in understanding “the chemical and physical properties of these elements to determine solution, interfacial and solid-state bonding and reactivity”.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2021

Energy efficient membrane-based process for CO 2 capture

Processes and systems for the energy efficient capture of CO 2 from a flue gas stream such as produced or resulting from power plant operation, are provided. The processes and systems integrate the use of high CO 2 /N 2 selectivity membranes and high CO 2 flux membranes, to capture CO 2 . Useful membranes can desirably be graphene oxide-based membranes.

Li, Shiguang↗
NASA NTRS2006

Interfacial Strength and Physical Properties of Functionalized Graphene - Epoxy Nanocomposites

The toughness and coefficient of thermal expansion of a series of functionalized graphene sheet - epoxy nanocomposites are investigated. Functionalized graphene sheets are produced by splitting graphite oxide into single graphene sheets through a rapid thermal expansion process. These graphene sheets contain approx. 10% oxygen due to the presence of hydroxide, epoxide, and carboxyl functional groups which assist in chemical bond formation with the epoxy matrix. Intrinsic surface functionality is used to graft alkyl amine chains on the graphene sheets, and the addition of excess hardener insures covalent bonding between the epoxide matrix and graphene sheets. Considerable improvement in the epoxy dimensional stability is obtained. An increase in nanocomposite toughness is observed in some cases.

Miller, Sandi G.↗
DOE OSTI2020

Dry-pressed lithium nickel cobalt manganese oxide (NCM) cathodes enabled by holey graphene host

There is an increasing demand for electric vehicle batteries with higher energy densities that can be manufactured with low cost utilizing environmentally friendly processes. Lithium nickel cobalt manganese oxides (NCM), such as LiNi(0.5)Co(0.2)Mr(0.3)O(2) (NCM523), are commonly used in commercial lithium ion batteries for electric vehicle applications. These cathodes are typically fabricated using environmentally hazardous, energy intensive, and time-consuming solvent-based slurry casting processes. Polymeric binders, also required for cathode preparation, add weight and can undergo parasitic reactions during battery cycling. Here we report a facile, solvent-free, binder-free, and rapid cold-press electrode fabrication process to prepare high mass loading NCM cathodes within minutes. This process is enabled by the use of holey graphene, a unique lightweight, compressible carbon nanomaterial that serves as both a binder and an electrically conductive matrix. NCM cathodes fabricated by this method are stable and exhibit good active material utilization. A significant advantage for the dry-press process is that the electrode mass loadings can be readily increased simply by adding more composite powder to the compression molding die, resulting in improved areal capacities that are attractive for applications requiring high energy per unit footprint. (C) 2020 Elsevier Ltd. All rights reserved.

25 ENERGY STORAGE↗
DOE OSTI2021

Role of transferred graphene on atomic interaction of GaAs for remote epitaxy

Remote epitaxy is a recently discovered type of epitaxy, wherein single-crystalline thin films can be grown on graphene-coated substrates following the crystallinity of the substrate via remote interaction through graphene. Although remote epitaxy provides a pathway to form freestanding membranes by controlled exfoliation of grown film at the graphene interface, implementing remote epitaxy is not straightforward because atomically precise control of interface is required. Here, we unveil the role of the graphene–substrate interface on the remote epitaxy of GaAs by investigating the interface at the atomic scale. By comparing remote epitaxy on wet-transferred and dry-transferred graphene, we show that interfacial oxide layer formed at the graphene–substrate interface hinders remote interaction through graphene when wet-transferred graphene is employed, which is confirmed by an increase of interatomic distance through graphene and also by the formation of polycrystalline films on graphene. On the other hand, when dry-transferred graphene is employed, the interface is free of native oxide, and single-crystalline remote epitaxial films are formed on graphene, with the interatomic distance between the epilayer and the substrate matching with the theoretically predicted value. The first atomic layer of the grown film on graphene is vertically aligned with the top layer of the substrate with these atoms having different polarities, substantiating the remote interaction of adatoms with the substrate through graphene. These results directly show the impact of interface properties formed by different graphene transfer methods on remote epitaxy.

36 MATERIALS SCIENCE↗
NASA NTRS2015

Graphene-Based Electrode for a Supercapacitor

A supercapacitor electrode mechanism comprising an electrically conductive, porous substrate, having one or more metallic oxides deposited on a first surface and a chemically reduced graphene oxide deposited on a second surface, to thereby provide an electrical double layer associated with the substrate. The substrate may be carbon paper or a similar substance. The layers of the supercapacitor are optionally rolled into an approximately cylindrical structure.

Chen, Bin↗
DOE OSTI2021

Tunable room-temperature ferromagnetism in Co-doped two-dimensional van der Waals ZnO

The recent discovery of ferromagnetism in two-dimensional van der Waals crystals has provoked a surge of interest in the exploration of fundamental spin interaction in reduced dimensions. However, existing material candidates have several limitations, notably lacking intrinsic room-temperature ferromagnetic order and air stability. Here, motivated by the anomalously high Curie temperature observed in bulk diluted magnetic oxides, we demonstrate room-temperature ferromagnetism in Co-doped graphene-like Zinc Oxide, a chemically stable layered material in air, down to single atom thickness. Through the magneto-optic Kerr effect, superconducting quantum interference device and X-ray magnetic circular dichroism measurements, we observe clear evidences of spontaneous magnetization in such exotic material systems at room temperature and above. Transmission electron microscopy and atomic force microscopy results explicitly exclude the existence of metallic Co or cobalt oxides clusters. X-ray characterizations reveal that the substitutional Co atoms form Co 2+ states in the graphitic lattice of ZnO. By varying the Co doping level, we observe transitions between paramagnetic, ferromagnetic and less ordered phases due to the interplay between impurity-band-exchange and super-exchange interactions. Our discovery opens another path to 2D ferromagnetism at room temperature with the advantage of exceptional tunability and robustness.

36 MATERIALS SCIENCE↗
NASA NTRS2018

Nanoscale Fabrication of Microwave Detectors from Commercially-Available CVD-Grown Monolayer Graphene

Using commercially-available monolayer graphene, synthesized by means of chemical vapor deposition, microwave power sensing elements have been nanofabricated and integrated with microwave-grade test structures suitable for on-wafer probing. The graphene, situated on a thermal oxide, was first cleaned of stray contaminants in a forming gas environment briefly held at 250 degrees Celsius using a rapid thermal annealer. Immediately following this step, the graphene was passivated with a protective aluminum oxide layer (approximately S nm in thickness). Micrometer-scale Corbino disc test structures were then fabricated in direct contact with the graphene using a self-aligned process, which relies on the fact that tetramethylammonium hydroxide develops the photoresist while removing the aluminum oxide. Graphene nanoribbons (with widths as small 400 nm) were then fabricated across the Corbino disc gaps using electron-beam writing in conjunction with a negative tone resist. The same developer exposed the majority of the graphene while defining nanometer-scale lines of photoresist stacked upon aluminum oxide. These stacks served as etch-stops while the unprotected graphene was ion-milled in an oxygen plasma. Finally, the photoresist was removed leaving behind passivated graphene nanoribbons. Damage caused by the fabrication was evaluated by comparing the Raman spectra of the grapheme before and after processing.

detectors↗