Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “gimbals”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

Magnetic suspension and pointing system

Apparatus for providing accurate pointing of instruments on a carrier vehicle and for providing isolation of the instruments from the vehicle's motion disturbances is presented. The apparatus includes two assemblies, with connecting interfaces, each assembly having a separate function. The first assembly is attached to the carrier vehicle and consists of an azimuth gimbal and an elevation gimbal which provide coarse pointing of the instruments by allowing two rotations of the instruments relative to the carrier vehicle. The second or vernier pointing assembly is made up of magnetic suspension and fine pointing actuators, roll motor segments, and an instrument mounting plate around which a continuous annular rim is attached which provides appropriate magnetic circuits for the actuators and the roll motor segments. The vernier pointing assembly provides six degree-of-freedom isolation from carrier motion disturbances.

Anderson, W. W.↗
NASA NTRS1981

A drive unit for the instrument pointing system

The requirements, capabilities, and unique design features of the instrument pointing system drive units (DU) are presented. The DU's are identical for all three gimbal axes (elevation, cross elevation, and azimuth) and provide alternating rotation of shaft versus the housing of + or - 180 deg. The design features include: two ball bearing cartridges using cemented carbide balls coated with TiC a layer; redundant brushless torque motors and resolvers; a load by-pass mechanism driven by a dc torque motor to off-load the bearings during ascent/descent, ground transportation, and to provide an emergency breaking capability; and cabling over each gimbal axis by means of cable follow-up consisting of 13 signal and 15 power flat band cable loops. Test results of disturbance torque characteristics are presented.

Birner, R.↗
NASA NTRS1981

High-stability Shuttle pointing system

It was recognized that precision pointing provided by the Orbiter's attitude control system would not be good enough for Shuttle payload scientific experiments or certain Defense department payloads. The Annular Suspension Pointing System (ASPS) is being developed to satisfy these more exacting pointing requirements. The ASPS is a modular pointing system which consists of two principal parts, including an ASPS Gimbal System (AGS) which provides three conventional ball-bearing gimbals and an ASPS Vernier System (AVS) which magnetically isolates the payload. AGS performance requirements are discussed and an AGS system description is given. The overall AGS system consists of the mechanical hardware, sensors, electronics, and software. Attention is also given to system simulation and performance prediction, and support facilities.

Van Riper, R.↗
NASA NTRS1982

Development of a high stability pointing mechanism for wide application

A recurrent requirement of spaceborne instruments and communications equipment is that of accurate pointing. This need is recognizable in such diverse applications as Star Sensor trimming, Momentum Wheel gimballing, in-orbit adjustment or alignment of equipment, inter-satellite communication and Antenna Pointing. A pointing mechanism of novel design having several advantages over the more conventional gimbal, centre-pivoted, or cross axis pointing concepts is described.

Brunnen, A. J. D.↗
NASA NTRS1983

Control techniques to improve Space Shuttle solid rocket booster separation

The present Space Shuttle's control system does not prevent the Orbiter's main engines from being in gimbal positions that are adverse to solid rocket booster separation. By eliminating the attitude error and attitude rate feedback just prior to solid rocket booster separation, the detrimental effects of the Orbiter's main engines can be reduced. In addition, if angular acceleration feedback is applied, the gimbal torques produced by the Orbiter's engines can reduce the detrimental effects of the aerodynamic torques. This paper develops these control techniques and compares the separation capability of the developed control systems. Currently with the worst case initial conditions and each Shuttle system dispersion aligned in the worst direction (which is more conservative than will be experienced in flight), the solid rocket booster has an interference with the Shuttle's external tank of 30 in. Elimination of the attitude error and attitude rate feedback reduces that interference to 19 in. Substitution of angular acceleration feedback reduces the interference to 6 in. The two latter interferences can be eliminated by atess conservative analysis techniques, that is, by using a root sum square of the system dispersions.

Tomlin, D. D.↗
NASA NTRS1984

Actuator development for the Instrument Pointing System (IPS)

The mechanisms of the instrument pointing system (IPS) are described. Particular emphasis is placed on the actuators which are necessary for operating the IPS. The actuators are described as follows: (1) two linear actuators that clamp the gimbals down during ascent and descent; (2) two linear actuators that attach the payload to the IPS during the mission, and release it into the payload clamps; (3) one rotational actuator that opens and closes the payload clamps; and (4) three identical drive units that represent the three orthogonal gimbal axes and are the prime movers for pointing. Design features, manufacturing problems, test performance, and results are presented.

Suttner, K.↗
NASA NTRS1984

The design and development of a solar tracking unit

The solar tracking unit was developed to support the Laser Heterodyne Spectrometer (LHS) airborne instrument, but has application to a general class of airborne solar occultation research instruments. The unit consists of a mirror mounted on two gimbals, one of which is hollow. The mirror reflects a 7.6 cm (3.0 in.) diameter beam of sunlight through the hollow gimbal into the research instrument optical axis. A portion of the reflected sunlight is directed into a tracking telescope which uses a four quadrant silicon detector to produce the servo error signals. The colinearity of the tracker output beam and the research instrument optical axis is maintained to better than + or - 1 arc-minute. The unit is microcomputer controlled and is capable of stand alone operation, including automatic Sun acquisition or operation under the control of the research instrument.

Jones, I. W.↗
NASA NTRS1984

Simplified planar model of ground test verification structure, appendix B

The planar version of the structure is shown for which a model was developed. The model is 12th order including 6 structural modes. One mode results from the base translation, one from the gimbal rotation, three from the flex characteristics of the Astromast Boom and gyro package, and one from the tether and tripod. The model includes one input, one disturbance and one output which are a control torque at the gimbal, a translational force at the base, and the rotation rate of the Astromast tip, respectively.

Source record↗
NASA NTRS1984

Elimination of uncontrollable rigid body mode, appendix C

The planar system model is examined which reveals two rigid body modes. One is due to the pure translation of the whole experiment assembly and is uncontrollable because the only control input is a torque at the gimbal. The other rigid body mode is due to the pointing of the gimbal and is the one for which control is sort. The problem arises from the Vector V2 which relates the control input to the modal coordinates. Since its fifth and sixth elements are both nonzero, neither body mode can be thrown away as is. The two rigid body modes must be transformed so that one is unaffected by the control input and one is left controllable. The uncontrollable mode can then be eliminated from the model for design purposes. A process is described to accomplish the elimination of the uncontrollable rigid body mode.

Source record↗
NASA NTRS1984

Electromechanical/electromagnetics working group summary

The component and system technology issues associated with suspension and power conversion systems for the flywheel were discussed. The development of the technology consists of three major steps and encompasses a complementary mix of analytical efforts and hardware development for validation of design approaches and concept implementations. The major elements included: (1) studies to determine the optimal system configuration considering gimballed and nongimballed wheel concepts and incorporating the best 1984 component technology. These studies must also address the impact of rotor configuration on other elements of the system such as motor/generators and magnetic suspension systems to permit the selection of the optimal configuration for the demonstration phase; (2) focus the development program on integration and demonstration of a complete system which includes the rotor, suspension, and power conversion subsystems which emphasis efficiency; (3) conduct a technology program on motor/generators, suspension systems, gimbals, and sensors to take advantage of known technological advances.

Eisenhaure, D. B.↗
NASA NTRS1986

Sensing Horizontal Heading in Aircraft Maneuvers

Modified gyroscopic system indicates geographic heading even in nearly vertical flight. Gyroscopes and gimbals of system assume this configuration when aircraft has pitched into vertical dive. Outer roll gimbal fixed with respect to aircraft frame in this orientation. Now, azimuth signal in modified system indicates what aircraft heading would be if it were to resume level flight from climb or dive.

Cowdin, K. T.↗
NASA NTRS1985

Payload isolation and precision pointing for the 1990's

The design of a pointing system that is applicable for a variety of payloads is examined. The system employs a very soft interface coupled with inertial control torques which use reaction wheels or control moment gyros. The fundamental stability and disturbance rejection characteristics of simple gimbal pointing systems and the soft mounted inertially reacting concept are evaluated and compared. It is observed that in simple and two-stage gimbal systems there is dynamic interaction with the basebody and these types of systems are not applicable for a Space Station/Space Platform environment in which system dynamics are uncertain; however, the soft mounted inertially reacting concept minimizes the dynamic interaction with the basebody and retains stability. It is concluded that the soft mounted inertially reacting concept has the pointing accuracy and disturbance isolation of a free flying spacecraft while still obtaining power, communication, orbit maintenance, and servicing from a basebody.

Sirlin, S. W.↗
NASA NTRS1987

Soft mounted momentum compensated pointing system for the Space Shuttle Orbiter

This paper describes a potential pointing and tracking system for the Space Shuttle with possible future application to Space Station. In order to accomplish high precision pointing and tracking (at rates up to 2 deg/s) in the expected disturbance environment, a high bandwidth gimbaled pointing system is required. A soft-mounted, momentum-compensated gimbal system is suggested for this role. A momentum-compensated system is inertially reacting, decoupling the control system dynamics from the basebody structural dynamics. This allows a soft isolation stage to be added between the basebody and the articulation stage, which attenuates high frequency disturbances. In this paper, three configurations are examined: a hard-mounted system, a passive soft-mounted system, and an active soft-mounted system. Analysis demonstrates that the soft-mounted systems have superior disturbance-rejection properties. The active soft mount allows reduction of the isolation stiffness to zero, and so obtains the highest level of performance.

Sirlin, Samuel W.↗
NASA NTRS1987

Optical alignment of Centaur's inertial guidance system

During Centaur launch operations the launch azimuth of the inertial platform's U-accelerometer input axis must be accurately established and maintained. This is accomplished by using an optically closed loop system with a long-range autotheodolite whose line of sight was established by a first-order survey. A collimated light beam from the autotheodolite intercepts a reflecting Porro prism mounted on the platform azimuth gimbal. Thus, any deviation of the Porro prism from its predetermined heading is optically detected by the autotheodolite. The error signal produced is used to torque the azimuth gimbal back to its required launch azimuth. The heading of the U-accelerometer input axis is therefore maintained automatically. Previously, the autotheodolite system could not distinguish between vehicle sway and rotational motion of the inertial platform unless at least three prisms were used. One prism was mounted on the inertial platform to maintain azimuth alignment, and two prisms were mounted externally on the vehicle to track sway. For example, the automatic azimuth-laying theodolite (AALT-SV-M2) on the Saturn vehilce used three prisms. The results of testing and modifying the AALT-SV-M2 autotheodolite to simultaneously monitor and maintain alignment of the inertial platform and track the sway of the vehicle from a single Porro prism.

Gordan, Andrew L.↗
NASA NTRS1988

An approach to CMG steering using feedback linearization

This paper presents an approach for controlling spacecraft equipped with control moment gyroscopes. A technique from feedback linearization theory is used to transform the original nonlinear problem to an equivalent linear form without approximating assumptions. In this form, the spacecraft dynamics appear linearly, and are decoupled from redundancy in the system of gyroscopes. A general approach to distributing control effort among the available actuators is described which includes provisions for redistribution of rotors, explicit bounds in gimbal rates, and guaranteed operation at or near singular configurations. A particular algorithm is developed for systems of double-gimbal devices, and demonstrated in two examples for which existing approaches fail to give adequate performance.

Dzielski, John↗
NASA NTRS1986

Design and performance of the halogen occultation experiment (HALOE) remote sensor

HALOE is an optical remote sensor that measures extinction of solar radiation caused by the earth's atmosphere in eight channels, ranging in wavelength from 2.5 to 10.1 microns. These measurements, which occur twice each satellite orbit during solar occultation, are inverted to yield vertical distributions of middle atmosphere ozone (O3), water vapor, nitrogen dioxide, nitric oxide, hydrogen fluoride, hydrogen chloride, and methane. A channel located in the 2.7 region is used to infer the tangent point pressure by measuring carbon dioxide absorption. The HALOE instrument consists of a two-axis gimbal system, telescope, spectral discrimination optics and a 12-bit data system. The gimbal system tracks the solar radiometric centroid in the azimuthal plane and tracks the solar limb in the elevation plane, placing the instrument's instantaneous field-of-view 4 arcmin down from the solar top edge. The instrument gathers data for tangent altitudes ranging from 150 km to the earth's horizon. Prior to an orbital sunset and after an orbital sunrise, HALOE automatically performs calibration sequences to enhance data interpretation. The instrument is presently being tested at the NASA Langley Research Center in preparation for launch on the Upper Atmosphere Research Satellite near the end of this decade. This paper describes the instrumenmt design, operation, and functional performance.

Baker, R. L.↗
NASA NTRS1988

NASA Office of Space Sciences and Applications study on Space Station attached payload pointing

A study has been conducted to determine the articulated-pointing requirements of a suite of instruments carried by the NASA Space Station, and define a pointing system architecture accomodating those requirements. It is found that these pointing requirements are sufficiently exacting, and the Space Station's disturbance environment sufficiently severe, to preclude the successful use of a conventional gimbal-pointing system; a gimbaled system incorporating an isolation stage is judged capable of furnishing the requisite levels of pointing performance.

Laskin, R. A.↗