Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “geometry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Solar Proton Transport Within an ICRU Sphere Surrounded by a Complex Shield: Ray-trace Geometry

A computationally efficient 3DHZETRN code with enhanced neutron and light ion (Z is less than or equal to 2) propagation was recently developed for complex, inhomogeneous shield geometry described by combinatorial objects. Comparisons were made between 3DHZETRN results and Monte Carlo (MC) simulations at locations within the combinatorial geometry, and it was shown that 3DHZETRN agrees with the MC codes to the extent they agree with each other. In the present report, the 3DHZETRN code is extended to enable analysis in ray-trace geometry. This latest extension enables the code to be used within current engineering design practices utilizing fully detailed vehicle and habitat geometries. Through convergence testing, it is shown that fidelity in an actual shield geometry can be maintained in the discrete ray-trace description by systematically increasing the number of discrete rays used. It is also shown that this fidelity is carried into transport procedures and resulting exposure quantities without sacrificing computational efficiency.

Slaba, Tony C.↗

Imaging a Free-Geometry Magma Reservoir Using FEM-Based Linear Inverse Modeling of InSAR Data: Application to Rabaul Caldera, Papua New Guinea

We test an innovative inversion scheme using Green’s functions from an array of pressure sources embedded in finite-element method (FEM) models to image, without assuming an a-priori geometry, the composite and complex shape of a volcano deformation source. We invert interferometric synthetic aperture radar (InSAR) data to estimate the pressurization and shape of the magma reservoir of Rabaul caldera, Papua New Guinea. The results image the extended shallow magmatic system responsible for a broad and long-term subsidence of the caldera between 2007 February and 2010 December. Elastic FEM solutions are integrated into the regularized linear inversion of InSAR data of volcano surface displacements in order to obtain a 3-D image of the source of deformation. The Green’s function matrix is constructed from a library of forward line-of-sight displacement solutions for a grid of cubic elementary deformation sources. Each source is sequentially generated by removing the corresponding cubic elements from a common meshed domain and simulating the injection of a fluid mass flux into the cavity, which results in a pressurization and volumetric change of the fluidfilled cavity. The use of a single mesh for the generation of all FEM models avoids the computationally expensive process of non-linear inversion and remeshing a variable geometry domain. Without assuming an a-priori source geometry other than the configuration of the 3-D grid that generates the library of Green’s functions, the geodetic data dictate the geometry of the magma reservoir as a 3-D distribution of pressure (or flux of magma) within the source array. The inversion of InSAR data of Rabaul caldera shows a distribution of interconnected sources forming an amorphous, shallow magmatic system elongated under two opposite sides of the caldera. The marginal areas at the sides of the imaged magmatic system are the possible feeding reservoirs of the ongoing Tavurvur volcano eruption of andesitic products on the east side and of the past Vulcan volcano eruptions of more evolved materials on the west side. The interconnection and spatial distributions of sources correspond to the petrography of the volcanic products described in the literature and to the dynamics of the single and twin eruptions that characterize the caldera. The ability to image the complex geometry of deformation sources in both space and time can improve our ability to monitor active volcanoes, widen our understanding of the dynamics of active volcanic systems and improve the predictions of eruptions.

Inverse theory↗

Imaging the Complex Geometry of a Magma Reservoir Using Fem-Based Linear Inverse Modeling of InSAR Data: Application to Rabaul Caldera, Papua New Guinea

We test an innovative inversion scheme using Green’s functions from an array of pressure sources embedded in finite-element method (FEM) models to image, without assuming an a-priori geometry, the composite and complex shape of a volcano deformation source. We invert interferometric synthetic aperture radar (InSAR) data to estimate the pressurization and shape of the magma reservoir of Rabaul caldera, Papua New Guinea. The results image the extended shallow magmatic system responsible for a broad and long-term subsidence of the caldera between 2007 February and 2010 December. Elastic FEM solutions are integrated into the regularized linear inversion of InSAR data of volcano surface displacements in order to obtain a 3-D image of the source of deformation. The Green’s function matrix is constructed from a library of forward line-of-sight displacement solutions for a grid of cubic elementary deformation sources. Each source is sequentially generated by removing the corresponding cubic elements from a common meshed domain and simulating the injection of a fluid mass flux into the cavity, which results in a pressurization and volumetric change of the fluid-filled cavity. The use of a single mesh for the generation of all FEM models avoids the computationally expensive process of non-linear inversion and remeshing a variable geometry domain. Without assuming an a-priori source geometry other than the configuration of the 3-D grid that generates the library of Green’s functions, the geodetic data dictate the geometry of the magma reservoir as a 3-D distribution of pressure (or flux of magma) within the source array. The inversion of InSAR data of Rabaul caldera shows a distribution of interconnected sources forming an amorphous, shallow magmatic system elongated under two opposite sides of the caldera. The marginal areas at the sides of the imaged magmatic system are the possible feeding reservoirs of the ongoing Tavurvur volcano eruption of andesitic products on the east side and of the past Vulcan volcano eruptions of more evolved materials on the west side. The interconnection and spatial distributions of sources correspond to the petrography of the volcanic products described in the literature and to the dynamics of the single and twin eruptions that characterize the caldera. The ability to image the complex geometry of deformation sources in both space and time can improve our ability to monitor active volcanoes, widen our understanding of the dynamics of active volcanic systems and improve the predictions of eruptions.

Inverse theory↗

Photon Organ and Effective Dose Coefficients for Cranial and Caudal Irradiation Geometries - Paper 148

With the introduction of new recommendations of the ICRP in Publication 103 the methodology for determining the protection quantity effective dose has been modified. The modifications include changes in organ/tissue weighting factors as well as some changes in radiation weighting factors. Computations of protection dose coefficients now require the use of reference male and female voxel phantoms, see ICRP Publication 110. Computations of equivalent doses in organs and tissues are now performed in each phantom and the average is used to compute the effective dose. The latest set of external dose coefficients using the new reference phantoms and the latest guidance from the ICRP were performed by the ICRP DOCAL task group and reported in ICRP Publication 116, the revision of ICRP Publication 74 and ICRU Report 57. The coefficients were determined for the following irradiation geometries: anterior-posterior (AP), posterior-anterior (PA), right and left lateral (RLAT and LLAT), rotational (ROT), and isotropic (ISO). For all geometries, except the ISO geometry, parallel beams are used to compute the dose coefficients. In this paper, the methodology of ICRP Publication 116 was used to compute dose coefficients for photons for irradiations of the body with parallel beams directed upward from below the feet (caudal) and directed downward from above the head (cranial). These geometries may be encountered in the workplace for personnel standing on contaminated surfaces or volumes and from overhead sources. In this work calculations of organ and tissue kerma and absorbed doses for caudal and cranial exposures to photons ranging in energy from 10 keV to 10 GeV have been performed using the MCNP6.1 radiation transport code and the adult reference phantoms of ICRP Publication 110. Dose coefficients for caudal and cranial irradiation geometries have been calculated in accordance with ICRP Publication 103. The coefficients differ significantly from AP values for both organ and tissues of ICRP Publication 116, as would be expected. For workers in these scenarios organ and effective doses can differ significantly from AP values. For common photon energies (i.e. 100 keV to a few MeV) the AP effective dose overestimates the caudal and cranial values by about a factor of ten. (authors)

61 RADIATION PROTECTION AND DOSIMETRY↗

Generalising G 2 geometry: involutivity, moment maps and moduli

We analyse the geometry of generic Minkowski N = 1, D = 4 flux compactifications in string theory, the default backgrounds for string model building. In M-theory they are the natural string theoretic extensions of G2 holonomy manifolds. In type II theories, they extend the notion of Calabi-Yau geometry and include the class of flux backgrounds based on generalised complex structures first considered by Graña et al. (GMPT). Using E 7(7) × $\mathbb{R}$ + generalised geometry we show that these compactifications are characterised by an SU(7) ⊂ E 7(7) structure defining an involutive subbundle of the generalised tangent space, and with a vanishing moment map, corresponding to the action of the diffeomorphism and gauge symmetries of the theory. The Kähler potential on the space of structures defines a natural extension of Hitchin’s G 2 functional. Using this framework we are able to count, for the first time, the massless scalar moduli of GMPT solutions in terms of generalised geometry cohomology groups. It also provides an intriguing new perspective on the existence of G 2 manifolds, suggesting possible connections to Geometrical Invariant Theory and stability.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Heterotic backgrounds via generalised geometry: moment maps and moduli

We describe the geometry of generic heterotic backgrounds preserving minimal supersymmetry in four dimensions using the language of generalised geometry. They are characterised by an SU(3) × Spin(6 + n) structure within O(6, 6 + n) x $\mathbb{R}$ + generalised geometry. Supersymmetry of the background is encoded in the existence of an involutive subbundle of the generalised tangent bundle and the vanishing of a moment map for the action of diffeomorphisms and gauge symmetries. We give both the superpotential and the Kähler potential for a generic background, showing that the latter defines a natural Hitchin functional for heterotic geometries. Intriguingly, this formulation suggests new connections to geometric invariant theory and an extended notion of stability. Finally we show that the analysis of infinitesimal deformations of these geometric structures naturally reproduces the known cohomologies that count the massless moduli of supersymmetric heterotic backgrounds.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Standard Model in conformal geometry: Local vs gauged scale invariance

Here, we discuss comparatively local versus gauged Weyl symmetry beyond Standard Model (SM) and Einstein gravity and their geometric interpretation. The SM and Einstein gravity admit a natural embedding in Weyl integrable geometry which is a special limit of Weyl conformal (non-metric) geometry. The theory has a local Weyl scale symmetry but no associated gauge boson. Unlike previous models with such symmetry, this embedding is truly minimal i.e. with no additional fields beyond SM and underlying geometry. This theory is compared to a similar minimal embedding of SM and Einstein gravity in Weyl conformal geometry (SMW) which has a full gauged scale invariance, with an associated Weyl gauge boson. At large field values, both theories give realistic, Starobinsky–Higgs like inflation. The broken phase of the current model is the decoupling limit of the massive Weyl gauge boson of the broken phase of SMW, while the local scale symmetry of the current model is part of the larger gauged scale symmetry of SMW. Hence, the current theory has a gauge embedding in SMW. Unlike in the SMW, we note that in models with local scale symmetry the associated current is trivial, which is a concern for the physical meaning of this symmetry. Therefore, the SMW is a more fundamental UV completion of SM in a full gauge theory of scale invariance that generates Einstein gravity in the (spontaneously) broken phase, as an effective theory.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Metrological characterization of X-ray diffraction methods at different acquisition geometries for determination of crystallite size in nano-scale materials

Crystallite size values were determined by X-ray diffraction methods for 183 powder samples. The tested size range was from a few to about several hundred nanometers. Crystallite size was calculated with direct use of the Scherrer equation, the Williamson–Hall method and the Rietveld procedure via the application of a series of commercial and free software. The results were statistically treated to estimate the significance of the difference in size resulting from these methods. We also estimated effect of acquisition conditions (Bragg–Brentano, parallel-beam geometry, step size, counting time) and data processing on the calculated crystallite size values. On the basis of the obtained results it is possible to conclude that direct use of the Scherrer equation, Williamson–Hall method and the Rietveld refinement employed by a series of software (EVA, PCW and TOPAS respectively) yield very close results for crystallite sizes less than 60 nm for parallel beam geometry and less than 100 nm for Bragg–Brentano geometry. However, we found that despite the fact that the differences between the crystallite sizes, which were calculated by various methods, are small by absolute values, they are statistically significant in some cases. The values of crystallite size determined from XRD were compared with those obtained by imaging in a transmission (TEM) and scanning electron microscopes (SEM). It was found that there was a good correlation in size only for crystallites smaller than 50 – 60 nm. Highlights: • The crystallite sizes for 183 nanopowders were calculated using different XRD methods • Obtained results were subject to statistical treatment • Results obtained with Bragg-Brentano and parallel beam geometries were compared • Influence of conditions of XRD pattern acquisition on results was estimated • Calculated by XRD crystallite sizes were compared with same obtained by TEM and SEM.

36 MATERIALS SCIENCE↗

Effects of Sample Geometry and Loading Rate onTensile Ductility of TRIP800 Steel

The effects of sample geometry and loading rate on the tensile ductility of a commercial grade Transformation Induced Plasticity (TRIP) steel are examined in this paper. Quasistatic tensile tests were performed for the 1.2mm gauge TRIP800 steel sheets with two geometries: sub-sized ASTM E-8 and a custom designed miniature tensile sample. Sample geometry effects on post-uniform elongation are discussed together with other experimental data reported in the open literature. Further discussions on the effects of sample geometry are cast in the context of mesh-size dependent ductility in finite element-based engineering simulations. The quasi-static tensile curve for the miniature sample is then compared with the split Hopkinson bar results at the loading rates of 1700-S-1 and 2650-S-1 with the same sample design. In contrary to the typical strain rate sensitivity results for mild steel where the dynamic strength increase at high strain rate usually occurs at the price of ductility reduction, our results show that the TRIP800 under examination has positive strain rate sensitivity on both strength and ductility. Images of the deformation process captured by high speed camera together with scanning electron microscopy (SEM) near the fracture zone are also used to elucidate the different deformation modes at different loading rates.

36 MATERIALS SCIENCE↗

Binding Geometries of Silicate Species on Ferrihydrite Surfaces

Silicate sorption on ferrihydrite surfaces, as monomers, oligomers, and polymers, strongly affects ferrihydrite crystallinity, thermodynamic stability, and surface reactivity. How these silicate species bind on ferrihydrite surfaces is, however, not well understood. We have determined silicate binding geometries using a combination of X-ray absorption spectroscopy (XAS), differential atomic pair distribution function (d-PDF) analysis, and density functional theory (DFT) calculations. Silicon K-edge absorption pre-edges and DFT-predicted energies indicate that silicate forms monomeric monodentate–mononuclear (MM) complexes at low silicate sorption loadings. With increasing silicate loading, the pre-edge peak shifts to higher energies, suggesting changes in the silicate binding geometry toward multidentate complexation. The d-PDF analysis determines the Si–Fe interatomic distance to be ~3.25 Å for the high-loading samples. The DFT calculations indicate that such distance corresponds to an oligomer in the bidentate–binuclear (BB) binding geometry. The transition of the silicate sorption geometry accompanied by polymerization can affect stability of ferrihydrite and its adsorption and redox reactivity and increase the degree of Si isotopic fractionation upon silicate sorption on Fe oxides. MM monomeric complexes and BB oligomeric complexes should be used for surface complexation models predicting silicate sorption on Fe oxide surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Minimal five dimensional supergravities and complex geometries

We discuss the relation between solutions admitting Killing spinors of minimal super-gravities in five dimensions, both timelike and null, and complex geometries. For the timelike solutions the results may be summarised as follows. In the ungauged case (vanishing cosmological constant {Lambda} 0) the solutions are determined in terms of a hyper-Kaehler base space; in the gauged case ({Lambda}<0) the complex geometry is Kaehler; in the de Sitter case ({Lambda}>0) the complex geometry is hyper-Kaehler with torsion (HKT). For the null solutions we shall focus on the de Sitter case, for which the solutions are determined by a constrained Einstein-Weyl 3-geometry called Gauduchon-Tod space. The method for constructing explicit solutions is discussed in each case.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Emergence of wave equations from quantum geometry

We argue that classical geometry should be viewed as a special limit of noncommutative geometry in which aspects which are inter-constrained decouple and appear arbitrary in the classical limit. In particular, the wave equation is really a partial derivative in a unified extra-dimensional noncommutative geometry and arises out of the greater rigidity of the noncommutative world not visible in the classical limit. We provide an introduction to this 'wave operator' approach to noncommutative geometry as recently used[27] to quantize any static spacetime metric admitting a spatial conformal Killing vector field, and in particular to construct the quantum Schwarzschild black hole. We also give an introduction to our related result that every classical Riemannian manifold is a shadow of a slightly noncommutative one wherein the meaning of the classical Ricci tensor becomes very natural as the square of a generalised braiding.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Remarks on Hamiltonian structures in G{sub 2}-geometry

In this article, we treat G{sub 2}-geometry as a special case of multisymplectic geometry and make a number of remarks regarding Hamiltonian multivector fields and Hamiltonian differential forms on manifolds with an integrable G{sub 2}-structure; in particular, we discuss existence and make a number of identifications of the spaces of Hamiltonian structures associated to the two multisymplectic structures associated to an integrable G{sub 2}-structure. Along the way, we prove some results in multisymplectic geometry that are generalizations of results from symplectic geometry.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Evaluation and optimization of the performance of frame geometries for lithium-ion battery application by computer simulation

Tailoring battery geometries is essential for many applications, as geometry influences the delivered capacity value. Two geometries, frame and conventional, have been studied and, for a given scan rate of 330C, the square frame shows a capacity value of 305,52 Ahm{sup −2}, which is 527 times higher than the one for the conventional geometry for a constant the area of all components.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

POLARIZED LINE FORMATION IN MULTI-DIMENSIONAL MEDIA. I. DECOMPOSITION OF STOKES PARAMETERS IN ARBITRARY GEOMETRIES

The solution of the polarized line radiative transfer (RT) equation in multi-dimensional geometries has been rarely addressed and only under the approximation that the changes of frequencies at each scattering are uncorrelated (complete frequency redistribution). With the increase in the resolution power of telescopes, being able to handle RT in multi-dimensional structures becomes absolutely necessary. In the present paper, our first aim is to formulate the polarized RT equation for resonance scattering in multi-dimensional media, using the elegant technique of irreducible spherical tensors T{sub Q}{sup K}(i, {Omega}). Our second aim is to develop a numerical method of a solution based on the polarized approximate lambda iteration (PALI) approach. We consider both complete frequency redistribution and partial frequency redistribution (PRD) in the line scattering. In a multi-dimensional geometry, the radiation field is non-axisymmetrical even in the absence of a symmetry breaking mechanism such as an oriented magnetic field. We generalize here to the three-dimensional (3D) case, the decomposition technique developed for the Hanle effect in a one-dimensional (1D) medium which allows one to represent the Stokes parameters I, Q, U by a set of six cylindrically symmetrical functions. The scattering phase matrix is expressed in terms of T{sub Q}{sup K}(i, {Omega}) (i=0,1,2, K=0,1,2, -K {<=} Q {<=} +K), with {Omega} being the direction of the outgoing ray. Starting from the definition of the source vector, we show that it can be represented in terms of six components S{sup K}{sub Q} independent of {Omega}. The formal solution of the multi-dimensional transfer equation shows that the Stokes parameters can also be expanded in terms of T{sub Q}{sup K}(i, {Omega}). Because of the 3D geometry, the expansion coefficients I{sup K}{sub Q} remain {Omega}-dependent. We show that each I{sup K}{sub Q} satisfies a simple transfer equation with a source term S{sup K}{sub Q} and that this transfer equation provides an efficient approach for handling the polarized transfer in multi-dimensional geometries. A PALI method for 3D, associated with a core-wing separation method for treating PRD, is developed. It is tested by comparison with 1D solutions, and several benchmark solutions in the 3D case are given.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Simulation of Liquid Lithium Divertor Geometry Using SOLPS-ITER

Here, plasma-facing component (PFC) geometries are evaluated for a Fusion Nuclear Science Facility (FNSF) design to find solutions that are compatible with flowing liquid lithium components while satisfying requirements from the perspective of plasma and neutral particle transport. Flowing liquid metal (LM) divertor systems offer important advantages due to continual regeneration of the surface material, but may require modifications from standard optimized tokamak divertor designs. Scrape Off Layer Plasma Simulator for the International Thermonuclear Experimental Reactor (SOLPS-ITER) simulations are used to compare standard vertical target, open, and balanced baffled geometries. It is found that the open geometry offers little control of neutral particles and has narrow operating windows where the divertor fluxes can be lowered to acceptable levels, while maintaining the required upstream density. The addition of neutral baffles allows greater control over the divertor conditions with less impact on the upstream density. The divertor neutral pressure in the baffled geometry is slightly higher than the open divertor, but not as large with a vertical target. A first-pass coupling of the SOLPS solution with sheath and implantation/erosion models to compute the lithium emission shows that the lithium is largely confined to the near-surface region due to the small ionization mean free path and large main ion flow toward the surface. The lithium source was varied by three orders of magnitude. At the highest rate, when the sourced lithium approaches the level of the main ion recycling flux, a high core lithium concentration (~10%) is observed with only moderate power dissipation to affect the divertor plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Measuring Space-Time Geometry over the Ages

Theorists are often told to express things in the 'observational plane'. One can do this for space-time geometry, considering 'visual' observations of matter in our universe by a single observer over time, with no assumptions about isometries, initial conditions, nor any particular relation between matter and geometry, such as Einstein's equations. Using observables as coordinates naturally leads to a parametrization of space-time geometry in terms of other observables, which in turn prescribes an observational program to measure the geometry. Under the assumption of vorticity-free matter flow we describe this observational program, which includes measurements of gravitational lensing, proper motion, and redshift drift. Only 15% of the curvature information can be extracted without long time baseline observations, and this increases to 35% with observations that will take decades. The rest would likely require centuries of observations. The formalism developed is exact, non-perturbative, and more general than the usual cosmological analysis.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Reference Model 1 Scaled Geometry (RM1: Tidal Current Turbine)

Contains the Reference Model 1 (RM1) scaled scale geometry files of the Tidal Current Turbine, developed by the Reference Model Project (RMP). These scaled geometry files are saved as SolidWorks assembly, IGS, and STEP files, and require a CAD program to view. The scaled RM1 device was tested at the Saint Anthony Falls Laboratory (SAFL) at the University of Minnesota flume, details of which are described in the included journal article. The scale of the geometries included in this submission are at a 1:40 scale compared to the full scale geometry. This data was generated upon completion of the project on September 30, 2014. The Reference Model Project (RMP), sponsored by the U.S. Department of Energy (DOE), was a partnered effort to develop open-source MHK point designs as reference models (RMs) to benchmark MHK technology performance and costs, and an open-source methodology for design and analysis of MHK technologies, including models for estimating their capital costs, operational costs, and levelized costs of energy. The point designs also served as open-source test articles for university researchers and commercial technology developers. The RMP project team, led by Sandia National Laboratories (SNL), included a partnership between DOE, three national laboratories, including the National Renewable Energy Laboratory (NREL), Pacific Northwest National Laboratory (PNNL), and Oak Ridge National Laboratory (ORNL), the Applied Research Laboratory of Penn State University, and Re Vision Consulting. Reference Model 1 (RM1) is a dual variable-speed variable-pitch (VSVP) axial-flow tidal turbine device, designed for the Tacoma Narrows tidal current energy resource site in Puget Sound, Washington. RM1 comprises a monopile foundation and a crossarm assembly to mount the two rotors. The cross-arm assembly is nearly neutrally buoyant so the attached rotors can be recovered and redeployed with a minimal amount of lifting crane capacity; therefore, the design minimizes the handling requirements during deployment and recovery, which reduces overall cost in all O&M activities including access to the power conversion chain (PCC).

16 TIDAL AND WAVE POWER↗